Synthesis and properties of Au-Fe3O4 and Ag-Fe3O4 heterodimeric nanoparticles

Monodisperse Au-Fe 3 O 4 heterodimeric nanoparticles (NPs) were prepared by injecting precursors into a hot reaction solution.The size of Au and Fe 3 O 4 particles can be controlled by changing the injection temperature.UV-Vis spectra show that the surface plasma resonance band of Au-Fe 3 O 4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size.The as-prepared heterodimeric Au-Fe 3 O 4 NPs exhibited superparamagnetic properties at room temperature.The Ag-Fe 3 O 4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO 3 as precursor instead of HAuCl 4.It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs.     

Synthesis and characterization of L10 FePt nanoparticles from Pt–Fe3O4 core-shell nanoparticles

Pt/Fe₃O₄ core-shell nanoparticles have been prepared by a modified polyol method. Pt nanoparticles were first prepared via the reduction of Pt(acac)₂ by polyethylene glycol-200 (PEG-200), and layers of iron oxide were subsequently deposited on the surface of Pt nanoparticles by the thermal decomposition of Fe(acac)₃. The nanoparticles were characterized by XRD and HR-TEM. The as-prepared Pt/Fe₃O₄ nanoparticles have a chemically disordered FCC structure and transformed into chemically ordered fct structure after annealing in reducing atmosphere (4% H₂, 96% Ar) at 700 °C. The ordered fct FePt phase has high magnetic anisotropy with coercivity reaching 7.5 kOe at room temperature and 9.3 kOe at 10 K.     

Magnetic properties of ZnFe2O4 nanoparticles

Fine particles of ZnFe₂O₄ were synthesized by a wet chemical method in the (80 wt.% Fe₂O₃ + 20 wt.% ZnO) system. The morphological and structural properties of the mixed system were investigated by scanning electron microscopy, X-ray diffraction, inductively coupled plasma atomic emission, and X-ray photoelectron spectroscopy. The major phase was determined to be the ZnFe₂O₄ spinel with particle size of 11 nm. The magnetic properties of the material were investigated by ferromagnetic resonance (FMR) in the temperature range from liquid helium to room temperature. A very intense, asymmetric FMR signal from ZnFe₂O₄ nanoparticles was recorded, which has been analyzed in terms of two Callen-lineshape lines. Temperature dependence of the FMR parameters was obtained from fitting the experimental lines with two component lines. Analysis of the FMR spectra in terms of two separate components indicates the presence of strongly anisotropic magnetic interactions.     

Magnetoresistive properties of Fe3O4 nanoparticles embedded in a Cu matrix

We studied ordered arrays of magnetic nanoparticles (NPs) in a nonmagnetic matrix. The influence of annealing temperature and measurement geometry (varying angle between sample surface and external magnetic field direction) on magnetoresistance and coercive field values was established. Measurements were done on the Au(2 nm)/Cu(20 nm)/Fe₃O₄(NPs)/SiO₂/Si system.     

Synthesis of LiFePO4 nanoparticles and their electrochemical properties

LiFePO₄ nanoparticles were synthesized via polyol process. The temperature of the solution was rapidly increased up to 320 °C to obtain larger particles and the temperature was maintained for 16 h in a round-bottomed flask attached to a refluxing condenser. The X-ray diffractrion (XRD), pattern was indexed on the basis of orthorhombic olivine structure. The LiFePO₄ compound prepared through polyol process exhibited a high crystallinity. The particles show the various shapes with size ranging from 100 to 300 nm. The initial discharge curve of LiFePO₄ capacity shows 168 mA h/g at the 0.1C rate in the voltage range of 2.5–4 V with well-formed plateau.     

NiFe_2O_4纳米粉末的制备及磁性研究

以硝酸铁、硝酸镍以及柠檬酸为原料,采用凝胶-热分解法制备了N iFe2O4纳米粉末。利用X射线衍射确定了粉体的相结构、比表面积和晶格常数,扫描电子显微镜(SEM)观察了颗粒的形貌,振动样品磁强计(VSM)测量样品的磁性能。结果表明:所制备的样品均为尖晶石结构,颗粒粒径为36nm~68nm,且颗粒的粒径随着热处理温度的升高而增大,样品的比饱和磁化强度最大可达54.63 emu/g。同时,文章也对反应的动力学原理进行了研究,得出N iFe2O4纳米颗粒形成的活化能为15.8kJ/mol。     

Synthesis and electrical properties of Y2O3: Dy3+ & Eu3+ nanoparticles

Yttrium oxide (Y₂O₃) doped with Dy³⁺ & Eu³⁺ nanoparticle has been synthesized by solution combustion method. The formation of the compounds has been checked by X-ray diffraction method. The crystallite/particle size has been measured using Scherrer formula as well as by transmission electron microscopy which show that the size of the particles are in the nanorange. The frequency and temperature dependent variation of impedance Z*, dielectric constant (ε′), dielectric loss (ε″) and AC conductivity (σ) of Y₂O₃: Dy³⁺ & Eu³⁺ nanoparticles were also measured. The real and imaginary part of complex impedance makes semicircle in the complex plane. The center of semicircle arc is found to be shifted toward higher value of real part of impedance with increasing temperature. This indicates that the conductivity of the material increases with the increase in temperature. Cole–Cole plots demonstrate that the dielectric relaxation process occurs in the material. The AC conductivity (σ _AC) increases with the increase in temperature within the frequency range of 10³–10⁷ Hz confirming the hopping of the electrons in the conduction process. The value of impedance decreases sharply with increasing frequency and attains minimum value after 10⁵ Hz at all temperatures.     

Synthesis of Fe3O4 hollow microsphere chains and their magnetic properties

Fe₃O₄ hollow microsphere chains with lengths of 8–11 μm have been solvothermally synthesized in the mixed solution of glycerol and water with 1 M NaOH. The hollow microspheres have diameters in the range 0.7–1 μm, and the thickness of the shells is 150–300 nm. The shell of the hollow microspheres is constructed by octahedrons of 100–170 nm. However, when the concentration of NaOH is adjusted to 3 M, the octahedron chains with lengths of 30–50 μm can be obtained. The magnetic saturation values of hollow microsphere chains and octahedron chains are 88.1 and 102.4 emu/g at room temperature, respectively.     

Preparation and photocatalytic properties of magnetically reusable Fe3O4@ZnO core/shell nanoparticles

Fe₃O₄@ZnO binary nanoparticles were synthesized by a simple two-step chemical method and characterized using various analytical instruments. TEM result proved the binary nanoparticles have core/shell structures and average particle size is 60 nm. Photocatalytic investigation of Fe₃O₄@ZnO core/shell nanoparticles was carried out using rhodamine B (RhB) solution under UV light. Fe₃O₄@ZnO core/shell nanoparticles showed enhanced photocatalytic performance in comparison with the as prepared ZnO nanoparticles. The enhanced photocatalytic activity for Fe₃O₄@ZnO might be resulting from the higher concentration of surface oxygen vacancies and the suppressing effect of the Fe³⁺ ions on the recombination of photoinduced electron–hole pairs. Magnetization saturation value (5.96 emu/g) of Fe₃O₄@ZnO core/shell nanoparticles is high enough to be magnetically removed by applying a magnetic field. The core/shell photocatalyst can be easily separated by using a commercial magnet and almost no decrease in photocatalytic efficiency was observed even after recycling six times.     

Study on the optically linear birefringence and dichroism properties of Fe3O4 magnetic nanoparticles

We adopt an improved co-precipitation method to prepare the Fe₃O₄ magnetic nanoparticles (MNPs). Influence factors such as the reaction temperature, the pH value of the solution, and the Fe³⁺/Fe²⁺ molar concentration are considered. Via the transmission electronic microscope and X-ray diffractometry, we characterize the dispersibility and size of the products. The reaction temperature and the pH value of the solution have a great influence in the dispersibility and size of MNPs. The diameter of Fe₃O₄ MNP, produced under Fe³⁺/Fe²⁺ molar concentration of 0.25 mole/l and molar ratio of 1.9:1, the reaction temperature is 80 °C, and the pH value reaches 9, is close to 11 nm. Above all, considering the variation of molar concentrations in Fe³⁺/Fe²⁺, the linear birefringence and dichroism of the kerosene-based ferrofluids are investigated by a Stokes polarimeter.     

Effects of the agglomeration state on the Raman properties of Co3O4 nanoparticles

The features of the Raman spectra of Co₃O₄ 30‐nm nanoparticles depend strongly on their agglomeration state. When measured at low incident laser power, the spectrum of isolated nanoparticles corresponds to that found in bulk materials, whereas the agglomerated nanoparticles present a clear red‐shift and broadening of the Raman bands. On the other hand, when measured at even lower power, both agglomerated and isolated nanoparticles show the same spectrum of microscopic particles. These effects have been studied by variations of the 532‐nm laser power and the environmental temperature. The thermal dependence of Raman spectra of agglomerated nanoparticles is different to that of isolated nanoparticles but is comparable to the one of bulk material. The different behaviour of the nanoparticles at different agglomeration state is associated to the transmission of phonons among the particles. On the other hand, an increase of the laser power causes a larger number of acoustic phonons, producing a variation of the vibration anharmonicity of the nanoparticles. This increase is more pronounced in the agglomerated nanoparticles, due to the transmission of phonons, causing a much intense modification of the Raman spectrum produced by the laser power. These results clearly indicate that the agglomeration state of the nanoparticles affects their Raman properties. Copyright © 2012 John Wiley & Sons, Ltd.     

Enhanced superconducting properties in epitaxial FeSe thin films with self-assembled Fe3O4 nanoparticles

In this paper we report epitaxial tetragonal iron selenide thin films grown on single crystal SrTiO₃ (STO) (0 0 1) and MgO (0 0 1) substrates by a pulsed laser deposition (PLD) technique. Deposition temperature and annealing process are found to be critical for achieving the tetragonal phase and the optimum superconducting properties of the films. The critical transition temperature of the thin films ranges from 2 K to 11.5 K depending on the deposition temperature and annealing condition. The samples with higher critical transition temperatures show better film crystallinity along with self-assembled Fe₃O₄ nanoparticles (～15 nm in average particle size) in the films according to both X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis. Besides the better crystallinity achieved in the films, the formation of Fe₃O₄ nanoparticles could assist the formation of the tetragonal FeSe phase and thus lead to the enhanced superconducting properties.     

Synthesis and magnetic properties of antiferromagnetic Co3O4 nanoparticles

Antiferromagnetic Co₃O₄ nanoparticles with diameter around 30 nm have been synthesized by a solution-based method. The phase identification by the wide-angle X-ray powder diffraction indicates that the Co₃O₄ nanoparticle has a cubic spinel structure with a lattice constant of 0.80843(2) nm. The image of field emission scanning electron microscope shows that the nanoparticles are assembled together to form nanorods. The magnetic properties of Co₃O₄ fine particles have been measured by a superconducting quantum interference device magnetometer. A deviation of the Néel temperature from the bulk is observed, which can be well described by the theory of finite-size scaling. An enhanced coercivity as well as a loop shift are observed in the field-cooled hysteresis loop. The exchange bias field decreases with increasing temperature and diminishes at the Néel temperature. The training effect and the opening of the loop reveal the existence of the spin-glass-like surface spins.     

Synthesis of nanoparticles of CoxFe(3−x)O4 by combustion reaction method

Nanocrystalline magnetic particles of Co_xFe_(3−x)O₄, with x ranging from 0.79 to 1.15, has been synthesised by combustion reaction method using iron nitrate Fe(NO₃)₃.9H₂O, cobalt nitrate Co(NO₃)₂·6H₂O, and urea CO(NH₂)₂ as fuel without template and subsequent heat treatment. The process is quite simple and inexpensive since it does not involve intermediate decomposition and/or calcining steps. The maximum reaction temperature ranged from 850 to 1010 °C and combustion lasted less then 30 s for all systems. X-ray diffraction patterns of all systems showed broad peaks consistent with cubic inverse spinel structure of CoFe₂O₄. The absence of extra reflections in the diffraction patterns of as-prepared materials ensures phase purity. The average crystallite sizes determined from the prominent (3 1 1) peak of the diffraction using Scherre's equation and TEM micrographs consisted of ca. 27 nm in spherical morphology. FTIR spectra of the as-prepared material showed traces of organic and metallic salts byproducts. However, when the same material was washed with deionised water the byproducts were rinsed off, resulting in pure materials. Magnetic properties such as saturation magnetisation, remanence magnetisation and coercivity field measured at room temperature were 48 emu/g, 15 emu/g and 900 Oe, respectively.     

Effect of a SiO2 coating on the magnetic properties of Fe3O4 nanoparticles

In this work the effect of a SiO2 coating on the magnetic properties of Fe3O4 nanoparticles obtained by the sol-gel method is analyzed. Two sets of samples were prepared: Fe3O4 nanoparticles and Fe3O4@SiO2 core-shell composites. The samples display the characteristic spinel structure associated with the magnetite Fe3O4 phase, with the majority of grain sizes around 5-10 nm. At room temperature the nanoparticles show the characteristic superparamagnetic behavior with mean blocking temperatures around 160 and 120 K for Fe3O4 and Fe3O4@SiO2, respectively. The main effect of the SiO2 coating is reflected in the temperature dependence of the high field magnetization (μ(0)H = 6 T), i.e. deviations from the Bloch law at low temperatures (T < 20 K). Such deviations, enhanced by the introduction of the SiO2 coating, are associated with the occurrence of surface spin disordered effects. The induction heating effects (magnetic hyperthermia) are analyzed under the application of an AC magnetic field. Maximum specific absorption rate (SAR) values around 1.5 W g(-1) were achieved for the Fe3O4 nanoparticles. A significant decrease (around 26%) is found in the SAR values of the SiO2 coated nanocomposite. The different heating response is analyzed in terms of the decrease of the effective nanoparticle magnetization in the Fe3O4@SiO2 core-shell composites at room temperature.     

CoFe2O4和MnFe2O4纳米复合介质的制备及其磁性研究

采用热分解法制备了分散程度高且平均晶粒尺寸为20 nm的CoFe₂O₄和MnFe₂O₄复合介质.低温磁化曲线测量显示,制备的复合介质具有软-硬磁交换弹性耦合效应,且合成温度以及软磁和硬磁相的成分比例对磁交换弹性耦合的强度有很大的影响.变温磁测量显示,温度为20K时,复合纳米介质的表面自旋冻结效应导致饱和磁化强度显著增加.Henkel测量显示,对分散的CoFe₂O₄和MnFe₂O₄复合介质,磁偶极相互作用占主导作用.     

Synthesis and magnetic properties of Cu0.5Ni0.5Fe2O4 nanoparticles produced by glycothermal and hydrothermal processes

Cu_0.5Ni_0.5Fe₂O₄ nanoparticles have been synthesized in ethylene glycol solution and in deionised water. The glycothermal reaction was carried at 200°C under gauge pressure of 100 psi. The hydrothermal treatment was done at 100°C under zero pressure. Complete single-phase cubic spinel structure in the samples made by glycothermal (sample G) and hydrothermal (sample H) processes formed after annealing at 600°C and 900°C respectively. The coercive field of sample H increases from 72 Oe to 133 Oe after sintering at 700°C and then decrease to 11 Oe on sintering at 1000°C. This variation is attributed to surface effects and crossover from single to multidomain behavior due to increasing particle size.     

Aloe vera plant-extracted solution hydrothermal synthesis and magnetic properties of magnetite (Fe3O4) nanoparticles

Magnetite (Fe₃O₄) nanoparticles have been successfully synthesized by a novel hydrothermal method using ferric acetylacetonate (Fe(C₅H₈O₂)₃) and aloe vera plant-extracted solution. The influences of different reaction temperatures and times on the structure and magnetic properties of the synthesized Fe₃O₄ nanoparticles were investigated. The synthesized nanoparticles are crystalline and have particle sizes of ～6–30 nm, as revealed by transmission electron microscopy (TEM). The results of X-ray diffraction (XRD), High resolution TEM (HRTEM) and selected area electron diffraction (SAED) indicate that the synthesized Fe₃O₄ nanoparticles have the inverse cubic spinel structure without the presence of any other phase impurities. The hysteresis loops of the Fe₃O₄ nanoparticles at room temperature show superparamagnetic behavior and the saturation magnetization of the Fe₃O₄ samples increases with increasing reaction temperature and time.