Environment friendly hydrothermal synthesis of carbon–Co_3O_4 nanorods composite as an efficient catalyst for oxygen evolution reaction

The design of cost-effective, highly active catalysts for hydrogen energy production is a vital element in the societal pursuit of sustainable energy. Water electrolysis is one of the most convenient processes to produce high purity hydrogen. Cobalt-based catalysts are well-known electrocatalysts for oxygen evolution reaction(OER). In this article, all these merits indicate that the present cobalt nanocomposite is a promising electrocatalyst for OER. C–Co_3O_4-nanorods catalyst with nanorod structure was synthesized by hydrothermal treatment of CoCl_2·6H_2O/dextrose/urea mixture at 180 °C for 18 h and then calcined at400 °C for 3.5 h. The role of dextrose percentage in solution to achieve the uniform coating of carbon on the surface of Co_3O_4-nanorods has been demonstrated. The prepared materials were characterized by X-ray diffraction(XRD), X-ray photoelectron spectrum(XPS), field emission scanning electron microscopy(FE-SEM), high-resolution transmission electron microscopy(HR-TEM), and Brunauer–Emmett–Teller instrument(BET). Due to its unique morphology, the C–Co_3O_4-nanorods catalyst exhibited better activity than Co_3O_4-microplates catalyst for OER in 1 M KOH aqueous solution. The results showed a highly efficient, scalable, and low-cost method for developing highly active and stable OER electrocatalysts in alkaline solution.     

Role of rhodium doping into lanthanum cobalt oxide (LaCoO3) perovskite and the induced bifunctional activity of oxygen evolution and reduction reactions in alkaline medium

Transition metal oxides, especially perovskites, have been considered effective electrocatalysts for the oxygen evolution (OER) and oxygen reduction (ORR) reactions in an alkaline solution. Here, a series of lanthanum cobalt rhodium oxide perovskites with the chemical formula LaCo_1-xRh_xO₃ (LCRO, 0.1 ≤ x ≤ 0.70) were prepared through the approach of solid-phase synthesis and their bifunctional electrocatalytic activity was assessed for both the OER and ORR. The crystallinity, morphology, surface, and electrocatalytic features of the LCRO were significantly correlated with the rhodium content. The LaCo_0.7Rh_0.3O₃ electrocatalysts with x = 0.3 showed enhanced electrocatalytic bifunctional performance with a substantially lower OER/ORR onset potential of 1.38/0.73 V vs HRE, smaller Tafel slope (116/90 mV/dec), and low charge-transfer resistance, which is the most efficient catalyst among the other studied ratios and superior to the pristine lanthanum cobalt oxide benchmark electrocatalysts. The LaCo_0.7Rh_0.3O₃ electrode exhibit good bifunctional electrocatalytic behavior and long-term durability with an OER and ORR onset potential gap (ΔE = E_OER ? E_ORR) of only 0.65 V, which could be credited to the enriched oxygen vacancies, lattice expansion and the improved electrical conductivity upon the doping of larger size of Rh ions. The LaCo_1-xRh_xO₃ catalysts are obtained from abundant materials that have the potential of highly-active bifunctional OER and ORR electrocatalysts.     

Implanting Ni into N-doped puffed carbon: A new advanced electrocatalyst for oxygen evolution reaction

Tailored design and synthesis of high-quality electrocatalysts is vital for the advancement of oxygen evolution reaction (OER). Herein, we report a powerful puffing method to fabricate hierarchical porous N-doped carbon with numerous embedded Ni nanoparticles. Interestingly, during the puffing and annealing process, rice precursor with N and Ni sources can be in-situ converted into Ni-embedded N-doped porous carbon (N-PC/Ni) composite. The obtained N-PC/Ni composite possesses a cross-linked porous architecture containing conductive carbon backbone and active Ni nanoparticles electrocatalysts for OER. The pore formation in N-PC/Ni composite is also proposed because of carbothermic reduction. The N-PC/Ni composite is fully studied as electrocatalysts for OER. Due to increased active surface area, enhanced electronic conductivity and reactivity, the designed N-PC/Ni composite exhibits superior OER performance with a low Tafel slope (∼88 mV/dec) and a low overpotential as well as excellent long-term stability in alkaline solution. Our proposed rational design strategy may provide a new way to construct other advanced metal/heteroatom-doped composites for widespread application in electrocatalysis.     

Nanostructured NiMoO4 as active electrocatalyst for oxygen evolution

Hydrothermally synthesized NiMoO₄ nanorods exhibit considerable electrocatalytic properties for the oxygen evolution in alkaline condition. The performance enhancement of ternary NiMoO₄ over binary oxide NiO and MoO₃ is attributed to the inclusion of Mo that promotes the pre-redox reaction of Ni to form active Ni species.     

Novel electrocatalysts for generating oxygen from alkaline water electrolysis

We have obtained spinel-type Co₃O₄ and La-doped Co₃O₄ in the form of thin film on Ni, using microwave-assisted synthesis, which dramatically exhibit very low overpotentials for the oxygen evolution reaction (OER). Investigations have shown that at the apparent current density of 100 mA cm⁻² in 1 mol dm⁻³ KOH at 25 °C, the new electrodes, Co₃O₄ (oxide loading = 3.4 ± 0.3 mg cm⁻²) and La-doped Co₃O₄ (oxide loading = 2.8 ± 0.4 mg cm⁻²), produce overpotentials, 235 ± 7 and 224 ± 8 mV, respectively. Such low overpotentials for the OER, to our knowledge, have not been found on any mixed oxide electrode material reported in literature till today. Small La addition improved the BET surface area and porosity of the oxide catalyst powder and reduced the charge transfer resistance for the OER on the electrode made of oxide powder.     

Composite electrocatalyst Mo<Subscript>x</Subscript>W<Subscript>1-x</Subscript>S<Subscript>2</Subscript> nanosheets on carbon fiber paper for highly efficient hydrogen evolution reaction

Molybdenum disulfide (MoS₂) or tungsten disulfide (WS₂), as a promising catalyst, is widely investigated for hydrogen evolution reaction (HER). In this work, a composite electrocatalysts Mo_xW_1-xS₂ is successfully decorated on carbon fiber paper (CFP) through a facile hydrothermal method. The three-dimensional porous CFP can enable the diffusion and penetration of electrolyte. Comparing with MoS₂ and WS₂ catalyst, the composite electrocatalyst Mo_xW_1-xS₂ nanosheets can expose the large number of electrochemically active sites. Hence, the as-prepared Mo_xW_1-xS₂/CFP (3:1) exhibit the outstanding HER catalytic activity with the small Tafel slope of 68 mV dec^?1 and the low overpotential of ??178.4?±?0.5 mV at a current density of 10 mA cm^?2. Chronoamperometric current test for 18 h confirm the long-term stability of the composite electrocatalyst.     

Metallic Co4N Porous Nanowire Arrays Activated by Surface Oxidation as Electrocatalysts for the Oxygen Evolution Reaction

Designing highly efficient electrocatalysts for oxygen evolution reaction (OER) plays a key role in the development of various renewable energy storage and conversion devices. In this work, we developed metallic Co₄N porous nanowire arrays directly grown on flexible substrates as highly active OER electrocatalysts for the first time. Benefiting from the collaborative advantages of metallic character, 1D porous nanowire arrays, and unique 3D electrode configuration, surface oxidation activated Co₄N porous nanowire arrays/carbon cloth achieved an extremely small overpotential of 257 mV at a current density of 10 mA cm⁻², and a low Tafel slope of 44 mV dec⁻¹ in an alkaline medium, which is the best OER performance among reported Co‐based electrocatalysts to date. Moreover, in‐depth mechanistic investigations demonstrate the active phases are the metallic Co₄N core inside with a thin cobalt oxides/hydroxides shell during the OER process. Our finding introduces a new concept to explore the design of high‐efficiency OER electrocatalysts.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Bimetallic cobalt-nickel coordination polymer electrocatalysts for enhancing oxygen evolution reaction

Coordination polymers（CPs） have great potential to be used in electrocatalysis owing to their designable compositions and structures. It is highly challenging to apply CPs as electrocatalysts for oxygen evolution reaction（OER） on account of insufficient catalytic efficiency and relatively poor stability of current electrocatalysts. Herein, through a mixed-metal strategy, one-dimensional Co_xNi_1-x-HIPA with dual active sites was synthesized and studied for OER electrocatalyst...     

Microwave-assisted synthesis of multimetal oxygen-evolving catalysts

Oxygen evolution reaction (OER) plays a pivotal role in water-splitting. Here, we report a facile method to synthesize multimetal supported on commercial carbon black via a time-saving microwave process. Crystalline FeNi₃ nanoparticles homogeneously doped with Mo are formed via a microwave treatment and activated to metal oxyhydroxide in-situ during cyclic voltammetry test with overpotential of only 280 mV at 10 mA cm^− 2 for OER in alkaline electrolyte, outperforming RuO₂. Our synthesis methodology is a promising alternative for large-scale production, delivering a valuable contribution to catalyst preparation and electrocatalytic water oxidation research.     

Hollow Co9S8 from metal organic framework supported on rGO as electrode material for highly stable supercapacitors

We demonstrate a hydrothermal method to fabricate a composite of reduced graphene oxide (rGO) with hollow Co₉S₈ derived from metal organic framework (MOF), which exhibits a high specific capacitance of 575.9 F/g at 2 A/g and 92.0% capacitance retention after 9000 cycles.     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

Electrodeposition of Defect-Rich Ternary NiCoFe Layered Double Hydroxides: Fine Modulation of Co3+ for Highly Efficient Oxygen Evolution Reaction

The low-cost, high-abundance and durable layered double hydroxides (LDHs) have been considered as promising electrocatalysts for oxygen evolution reaction (OER). However, the easy agglomeration of lamellar LDHs in the aqueous phase limits their practical applications. Herein, a series of ternary NiCoFe LDHs were successfully fabricated on nickel foam (NF) via a simple electrodeposition method. The as-prepared Ni(Co_0.5Fe_0.5)/NF displayed an unique nanoarray structural feature. It showed an OER overpotential of 209 mV at a current density of 10 mA cm⁻² in alkaline solution, which was superior to most systems reported so far. As evidenced by the XPS and XAFS results, such excellent performance of Ni(Co_0.5Fe_0.5)/NF was attributed to the higher Co³⁺/Co²⁺ ratio and more defects exposed, comparing with Ni(Co_0.5Fe_0.5)-bulk and Ni(Co_0.5Fe_0.5)-mono LDHs prepared by conventional coprecipitation method. Furthermore, the ratio of Co to Fe could significantly tune the Co electronic structure of Ni(Co_xFe_1-x)/NF composites (x=0.25, 0.50 and 0.75) and affect the electrocatalytic activity for OER, in which Ni(Co_0.5Fe_0.5)/NF showed the lowest energy barrier for OER rate-determining step (from O* to OOH*). This work proposes a facile method to develop high-efficiency OER electrocatalysts.     

Photocatalytic hydrogen production from acidic aqueous solution in BODIPY-cobaloxime-ascorbic acid homogeneous system

For the first time, iodinated BODIPY dyes with phenylamine or 8-hydroxylquinoline moiety at the meso-position on the BODIPY core were tested for the light-driven production of H₂ from the acidic aqueous solutions.     

A binder-free thin film anode composed of Co2 +-intercalated buserite grown on carbon cloth for oxygen evolution reaction

We present a binder-free catalytic anode for highly efficient and stable oxygen evolution reaction in alkaline media. The catalyst consists of a thin film of buserite-type layered manganese dioxide (MnO₂) intercalated with Co^2 + ions, resulting from electrodeposition of the layered MnO₂ film with tetrabutylammonium (Bu₄N⁺) ions on a carbon cloth, followed by ion-exchange of the initially incorporated Bu₄N⁺ with Co^2 + in solution. The electrode is capable to produce a current density of 10 mA cm^− 2 at an overpotential (η) of 377 mV with a Tafel slope of 48 mV dec^− 1, much superior to the layered MnO₂ without Co^2 +.     

Selective cyclodimerization of epichlorohydrin to dioxane derivatives over MOFs

Glycerol can be converted to valuable products such as epichlorohydrin which is an important intermediate applied in various industries. For example, dioxane derivatives, which are important pharmaceuticals, can be obtained from epichlorohydrin. In the present study, ZIF-8, ZIF-67, MIL-100, and UiO-66 were applied for the direct cyclodimerization of epichlorohydrin. These MOFs were selected because they were already applied as active catalysts in ring opening of epoxides. Among them, ZIF-8 showed the highest activity and selectivity in the absence of any solvent or co-catalyst. Using ZIF-8 as a catalyst, the cyclodimer product (1,4-dioxane 2,5-bis-chloromethyl) was obtained in a yield of about 70% which was significantly superior to previous homo or heterogeneous catalysts for this reaction. Due to ZIF-8 structure and the proposed mechanism, the cyclodimerization reaction catalyzed either by the defects in the structure and/or on the surface. Furthermore, acidic-basic characteristics were also in play. The NH₃ and CO₂ temperature-programed desorption technique were utilized to identify the active sites and thereby reaction mechanism. Moreover, because of similar properties of ZIF-8 to zeolites, the activity of commercial ZSM-5 for the same reaction was also investigated in this work.     

Annealing temperature dependent catalytic water oxidation activity of iron oxyhydroxide thin films

Nanostructured iron oxyhydroxide(Fe OOH) thin films have been synthesized using an electrodeposition method on a nickel foam(NF) substrate and effect of air annealing temperature on the catalytic performance is studied. The as-deposited and annealed thin films were characterized by X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS), field emission scanning electron microscopy(FE-SEM) and linear sweep voltammetry(LSV) to determine their structural, morphological, compositional and electrochemical properties, respectively. The as-deposited nanostructured amorphous Fe OOH thin film is converted into a polycrystalline Fe_2O_3 with hematite crystal structure at a high temperature. The Fe OOH thin film acts as an efficient electrocatalyst for the oxygen evolution reaction(OER) in an alkaline 1 M KOH electrolyte. The film annealed at 200 °C shows high catalytic activity with an onset overpotential of 240 m V with a smaller Tafel slope of 48 m V/dec. Additionally, it needs an overpotential of 290 mV to the drive the current density of 10 m A/cm~2 and shows good stability in the 1 M KOH electrolyte solution.     

In situ FT-IR and TPD-MS study of carbon monoxide oxidation over a CeO2/Co3O4 catalyst

The forming of surface species during the adsorption of carbon monoxide (CO) and CO/O₂ on a CeO₂/Co₃O₄ catalyst was investigated by in situ Fourier transform infrared (FT-IR) spectroscopy and temperature programmed desorption-mass spectroscopy (TPD-MS). When CO was adsorbed on the CeO₂/Co₃O₄ catalyst, two types of surface species were distinguishable at room temperature: carbonate and bicarbonate. Surface carbonate was adsorbed on the cerium and cobalt, while the surface bicarbonate absorbed on the CeO₂/Co₃O₄ catalyst at 1611, 1391, 1216 and 830 cm⁻¹. Furthermore, the TPD-MS profiles revealed that the CeO₂/Co₃O₄ catalyst showed a greater amount of CO₂ than CO at 373 K. The CO desorption from the CeO₂/Co₃O₄ catalyst with increasing temperature showed that the order of thermal stability was surface bicarbonate < surface carbonate < interface carbonate species. Interestingly, the residual carbonate species could remain on the interface up to 473 K. The results revealed that surface bicarbonate could promote the conversion of CO into CO₂ for CO oxidation below 50 K.     

Ag NPs decked GO composite as a competent and reusable catalyst for ‘ON WATER’ chemoselective synthesis of pyrano[2,3-c:6,5-c′]dipyrazol]-2-ones

We have synthesized and characterized Ag NPs decked GO composite and studied its role as reusable catalyst for the ‘ON WATER’ chemoselective synthesis of pyranodipyrazolones via the reaction of different carbonyl compounds with 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one. This method illustrates significant selectivity for pyranodipyrazolones over arylmethylene bispyrazolols and arylmethylenepyrazolones. Synergistic effect of heterogenic nature of water with reactants and Ag NPs/GO had profuse outcome on reaction as indicated by high TOF (18.03 × 10^?5 mol g^?1 min^?1). Furthermore, catalyst was recycled for 7-times without significant loss of activity.     

Enhanced oxygen evolution at hydrous nickel oxide electrodes via electrochemical ageing in alkaline solution

The effect of electrochemically ageing hydrous nickel oxide films via slow repetitive potential multi-cycling across the main nickel (II/III) redox peak was investigated in an aqueous base environment using cyclic voltammetry and steady state polarisation curves in the oxygen evolution reaction (OER) region. Similarities between hydrous nickel oxide films and electroprecipitated ‘battery type’ nickel oxide were shown due to their similar change in redox and oxygen evolving properties as a result of film ageing. This ageing method was found to significantly enhance the OER performance of the hydrous nickel oxide electrode with the OER overpotential decreasing by 60 ± 2 mV and experiencing a 10 fold increase in OER rate for a fixed overpotential over that of an un-aged electrode. The OER turnover frequency for an aged electrode was found to be 1.16 ± 0.07 s^− 1 in comparison to 0.05 ± 0.003 s^− 1 for a hydrous nickel oxide electrode not subjected to ageing.