Extension of the La7Mo7O30 structural type with La7Nb3W4O30 and La7Ta3W4O30 compounds

Two compounds of formula La₇A₃W₄O₃₀ (with A=Nb and Ta) were prepared by solid-state reaction at 1450 and 1490 °C. They crystallize in the rhombohedric space group R-3 (No. 148), with the hexagonal parameters: , and , . The structure of the materials was analyzed from X-ray, neutron and electronic diffraction. These oxides are isostructural of the reduced molybdenum compound La₇Mo₇O₃₀, which are formed of perovskite rod along [111]. An order between (Nb, Ta) and W is observed.     

3D [Ag-Mg] polyanionic frameworks in the La4Ag10Mg3 and La4Ag10.3Mg12 new ternary compounds

The crystal structures of two new ternary phases, La₄Ag₁₀Mg₃ and La₄Ag_10.3Mg₁₂, were refined from X-ray single crystal diffraction data. La₄Ag₁₀Mg₃ crystallizes in the Ca₄Au₁₀In₃ structure type, an ordered variant of the binary Zr₇Ni₁₀ compound: orthorhombic, Cmce, oS68, a=14.173(5), b=10.266(3), c=10.354(3) Å, Z=4, wR₂=0.0826, 676 F² values, 50 variables. La₄Ag_10.3Mg₁₂ represents a new structure type: orthorhombic, Cmmm, oS116-10.32, a=9.6130(3), b=24.9663(8), c=9.6333(2) Å, Z=4, wR₂=0.0403, 1185 F² values, 101 variables. The structural analysis of both compounds, highlighting a significant contraction of the Ag-Mg distances, suggests the existence of three-dimensional [Ag-Mg] networks hosting La atoms. LMTO calculations applied to La₄Ag₁₀Mg₃ indicate that the strongest bonds occur for Ag-Ag and Ag-Mg interactions, and confirm the presence of a 3D_∞[Ag₁₀Mg₃]^δ− polyanionic framework balanced by positively charged La atoms.     

La3Pd4Zn4 and La3Pt4Zn4 with a different coloring of the Gd3Cu4Ge4-type structure

Abstract  

The intermetallic zinc compounds La₃Pd₄Zn₄ and La₃Pt₄Zn₄ were synthesized by induction melting of the elements in sealed tantalum tubes. The structures were refined from X-ray single-crystal diffractometer data: Gd₃Cu₄Ge₄ type, Immm, a = 1,440.7(5), b = 743.6(2), c = 419.5(2) pm, wR ₂ = 0.0511, 353 F ² for La₃Pd₄Zn₄; and a = 1,439.9(2), b = 748.1(1), c = 415.66(6) pm, wR ₂ = 0.0558, 471 F ² for La₃Pt₄Zn₄ with 23 variables per refinement. The palladium (platinum) and zinc atoms build up a three-dimensional polyanionic [Pd₄Zn₄] (260–281 pm Pd–Zn) and [Pt₄Zn₄] (260–279 pm Pt–Zn) network in which the lanthanum atoms fill cavities of CN 14 (6 Pd/Pt + 8 Zn for La1) and CN 12 (6 Pd/Pt + 6 Zn for La2), respectively. The copper position of the Gd₃Cu₄Ge₄ type is occupied by zinc and the two crystallographically independent germanium sites by palladium (platinum), a new coloring pattern for this structure type. Within the [Pd₄Zn₄] and [Pt₄Zn₄] the Pd2 and Pt2 atoms form Pd2–Pd2 (291 pm) and Pt2–Pt2 (296 pm) dumbbells. The structures of La₃Pd₄Zn₄ and La₃Pt₄Zn₄ are discussed with respect to the prototype Gd₃Cu₄Ge₄ and the Zintl phase Sr₃Li₄Sb₄. Temperature-dependent magnetic susceptibility measurements indicate diamagnetism for La₃Pt₄Zn₄ and Pauli paramagnetism for La₃Pd₄Zn₄.     

The structural investigation of Ba4Bi3F17

The anion-excess ordered fluorite-related phase Ba₄Bi₃F₁₇ has been synthesized by a solid state reaction of BaF₂ and BiF₃ at 873 K. The crystal structure of Ba₄Bi₃F₁₇ has been studied using electron diffraction and X-ray powder diffraction (a=11.2300(2) Å, c=20.7766(5) Å, S.G. , R_I=0.020, R_P=0.036). Interstitial fluorine atoms in the Ba₄Bi₃F₁₇ structure are considered to form isolated cuboctahedral 8 : 12 : 1 clusters. The structural relationship between Ba₄Bi₃F₁₇ and similar rare-earth-based phases is discussed.     

Growth and characterization of thin films of Y2O3, La2O3 and La2CuO4

Films of Y₂O₃, La₂O₃, and La₂CuO₄ were prepared by an ultrasonic nebulization and pyrolysis method using acetylacetonates of the corresponding metals in alcohol solvents as source materials. Homogeneous, uniform films with good adherence have been obtained using this simple technique. As-deposited yttrium and lanthanum oxide films were poorly crystallized. After postannealing in oxygen at higher temperature, they crystallized into cubic and hexagonal phases, respectively. Transparent yttrium and lanthanum oxide films have high electric breakdown voltages. Single phase polycrystalline La₂CuO₄ thin films were obtained from a source solution with a La:Cu ratio of 2:1.     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

Structure and properties of Ce3Pd3Bi4, CePdBi, and CePd2Zn3

The intermetallic cerium compounds Ce₃-Pd₃Bi₄, CePdBi, and CePd₂Zn₃ were synthesized from the elements in sealed tantalum ampoules in an induction furnace. The compounds were characterized by X-ray powder and single crystal diffraction: CeCo₃B₂ type (ordered version of CaCu₅), P6/mmm, a = 538.4(4), c = 427.7(4) pm, wR2 = 0.0540, 115 F ² values, 9 variables for CePd₂Zn₃ and Y₃Au₃Sb₄ type, I [`4]{\bar 4} 3d, a = 1005.2(2) pm, w R2 = 0.0402, 264 F ² values, 9 variables for Ce₃Pd₃Bi₄, and MgAgAs type, a = 681.8(1) pm for CePdBi. The bismuthide structures are build up from three-dimensional networks of corner-sharing PdBi₄ tetrahedra with Pd–Bi distances of 281 (Ce₃Pd₃Bi₄) and 296 pm (CePdBi), respectively. The cerium atoms are located in larger voids of coordination number 12 (Ce₃Pd₃Bi₄) and 10 (CePdBi). In CePd₂Zn₃ the cerium atoms fill larger channels within the three-dimensional [Pd₂Zn₃] network with 18 (6 Pd + 12 Zn) nearest neighbors. The three compounds contain stable trivalent cerium with experimental magnetic moments of μ_eff = 2.70(2), 2.48(1), and 2.49(1) μ_B/Ce atom for CePd₂Zn₃, Ce₃Pd₃Bi₄, and CePdBi, respectively. Susceptibility and specific heat data gave no hint for magnetic ordering down to 2.1 K.     

Comparative high-pressure study and chemical bonding analysis of Rh3Bi14 and isostructural Rh3Bi12Br2

The binary compound Rh₃Bi₁₄ was synthesized from the elements. The compound is isostructural with Rh₃Bi₁₂Br₂, crystallizes with the orthorhombic space group Fddd (no. 70) and lattice parameters a=6.8959(15) Å, b=17.379(3) Å, c=31.758(6) Å. The crystal structure consists of a three-dimensional (3D) framework of edge-sharing cubes and square antiprisms (RhBi_8/2). It is closely related to the intermetallic compound RhBi₄, in which two Y-like frameworks of antiprisms interpenetrate. In Rh₃Bi₁₄ and Rh₃Bi₁₂Br₂, additional bismuth and bromine anions, respectively, fill the channels of the 3D polyhedral framework formed by covalently bonded rhodium and bismuth atoms. High-pressure X-ray powder diffraction data from synchrotron measurements of Rh₃Bi₁₄ and Rh₃Bi₁₂Br₂ indicate a high stability of both compounds in the investigated range from ambient pressure to ca. 30 GPa at ambient temperature.     

Temperature-dependent crystallographic studies and electronic structure of Ba2Cd3Bi4

The ternary compound Ba₂Cd₃Bi₄ crystallizes in the C-centered orthorhombic space group Cmce (No. 64) with its own type (Pearson's symbol oC36; a=7.019(3) Å, b=17.389(7) Å and c=9.246(3) Å determined at -23 °C). Although the structure of this intermetallic compound with transition metal in d¹⁰ configuration has already been established, details such as the rather unusual coordination of the Cd-atoms and the elongation in specific direction of their anisotropic displacement parameters had not been explained. These facts, along with the higher than 12% R-values from the original structure determination prompted the systematic structural studies by single-crystal X-ray diffraction at several different temperatures. The results from these studies confirm strong temperature dependence of the cadmiums’ anisotropic displacement parameters, concomitant rather large thermal expansion along the crystallographic b-axis. Electronic band structure calculations performed by the TB-LMTO-ASA method are also reported.     

Synthesis and characterization of quaternary selenides Sn2Pb5Bi4Se13 and Sn8.65Pb0.35Bi4Se15

Quaternary selenides Sn₂Pb₅Bi₄Se₁₃ and Sn_8.65Pb_0.35Bi₄Se₁₅ were synthesized from the elements in sealed silica tubes; their crystal structures were determined by single-crystal and powder X-ray diffraction. Both compounds crystallize in monoclinic space group C2/m (No.12), with lattice parameters of Sn₂Pb₅Bi₄Se₁₃: a = 14.001(6) Å, b = 4.234(2) Å, c = 23.471(8) Å, V = 1376.2(1) Å³, R₁/wR₂ = 0.0584/0.1477, and GOF = 1.023; Sn_8.65Pb_0.35Bi₄Se₁₅: a = 13.872(3) Å, b = 4.2021(8) (4) Å, c = 26.855(5) Å, V = 1557.1(5) Å³, R₁/wR₂ = 0.0506/0.1227, and GOF = 1.425. These compounds exhibit tropochemical cell-twinning of NaCl-type structures with lillianite homologous series L(4, 5) and L(4, 7) for Sn₂Pb₅Bi₄Se₁₃ and Sn_8.65Pb_0.35Bi₄Se₁₅, respectively. Measurements of electrical conductivity indicate that these materials are semiconductors with narrow band gaps; Sn₂Pb₅Bi₄Se₁₃ is n-type, whereas Sn_8.65Pb_0.35Bi₄Se₁₅ is a p-type semiconductor with Seebeck coefficients −80(5) and 178(7) μV/K at 300 K, respectively.     

Single crystal growth and structure of La4Cu3MoO12

We report the synthesis and structure determination of single crystals of La₄Cu₃MoO₁₂ grown from a CuO/KCl flux. This material, whose structure had previously been reported based solely on polycrystalline diffraction data, shows frustrated magnetic behavior and an anti-ferromagnetic ordering of spin-1/2 triangles at low temperatures. The structural and atomic parameters determined from the single crystal data are in very good agreement with those reported previously. However, HREM data showed evidence for disorder in the stacking of the Cu₃MoO₄ planes, and thus a twinned structural refinement in space group P2₁/m was replaced by an equivalent disordered structural model in space group Pm. This development of a synthetic route to single crystals of La₄Cu₃MoO₁₂ will allow a more detailed investigation of its complex electronic and magnetic properties.     

A Structural Investigation of La2(GeO4)O and Alkaline-Earth-Doped La9.33(GeO4)6O2

The structures of the oxyorthogermanate La₂(GeO₄)O and the apatite-structured La_9.33(GeO₄)₆O₂ have been refined from powder neutron diffraction data. La₂(GeO₄)O crystallizes in a monoclinic unit cell (P2₁/c) and is cation stoichiometric in contrast to previous reports. La_9.33(GeO₄)₆O₂ crystallizes in a hexagonal unit cell (P6₃/m) and the powder diffraction data show anisotropic peak broadening that is observed in electron diffraction patterns as incommensurate diffuse spots at hkq reciprocal planes (with q=1.6-1.7) and can be attributed to a correlated disorder in the “apatite channels”. This compound was doped up to a nominal composition close to M₂La₈(GeO₄)₆O₂ with M=Ca, Sr, Ba. The dopant ions preferentially occupy the 4f sites as the number of La vacancies decreases. The measured ionic conductivity of La_9.33(GeO₄)₆O₂ is about 3 orders of magnitude larger than for La₂(GeO₄)O at high temperatures and decreases with increasing dopant content from the highest value of about 0.16 S cm⁻¹ at 1160 K.     

Preparation, characterization and the standard enthalpy of formation of La0.95MnO3+δ and Sm0.95MnO3+δ

Among the perovskites, the rare earth manganites find application in several electrochemical devices because of their enhanced thermodynamic stability. In this paper, we present the results obtained on the preparation and characterization of La_0.95MnO_3+δ and Sm_0.95MnO_3+δ which were prepared by the solid state and sol–gel methods. XRD characterization of the manganites indicated that the crystal structure depends on the method of preparation and heat treatments. The ratio of Mn³⁺ to Mn⁴⁺ in these samples also depended on the method of preparation and heat treatments, as indicated by thermogravimetric (TG) and temperature programmed reduction (TPR) studies in Ar + 5% H₂ atmosphere. The standard molar enthalpy of formation, which is a measure of the thermodynamic stability of these compounds were determined using an isoperibol calorimeter.     

The phase diagram of the system La2(SO4)3Ag2SO4

The phase diagram of the system La₂(SO₄)₃Ag₂SO₄ was studied by DTA, XRD, SEM, and optical methods. One double salt is formed at 67 mole% La₂(SO₄)₃ and this melts incongruently at 876±6°C. A eutectic is formed at 8 mole% La₂(SO₄)₃ and at a temperature of 618±3°C. Suppression of decomposition was effected by the sealed tube method, but some reference is made to experiments conducted with a flowing atmosphere of SO₃, SO₂ and O₂.     

Al掺杂La10(SiO4)6O3的制备及其导电性能

以溶胶-凝胶法在850℃制备了Al掺杂La10(SiO4)6O3,即La10(SiO4)6-x(AlO4)xO3-0.5x(x=0,0.5,1.0,1.5和2.0),通过TG-DTA、XRD、IR和SEM表征,所得产品为磷灰石相。以电化学阻抗谱研究了其导电性能,发现决定电导率大小的因素有两种,一是间隙氧的数量,二是晶胞的大小,两种因素的综合作用,使得Al掺杂0.5时La10(SiO4)5.5(AlO4)0.5O2.75的电导率最大,在700℃时其电导率达到1.88×10-2S·cm-1。氧分压对电导率的研究表明,其主要的电荷载体是O2-离子。     

Synthesis and characterization of quaternary chalcogenides InSn2Bi3Se8 and In0.2Sn6Bi1.8Se9

Quaternary chalcogenides InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ were synthesized on direct combination of their elements in stoichiometric ratios at T>800 °C under vacuum. Their structures were determined with X-ray diffraction of single crystals. InSn₂Bi₃Se₈ crystallizes in monoclinic space group C2/m (No. 12) with a=13.557(3) Å, b=4.1299(8) Å, c=15.252(3) Å, β=115.73(3)°, V=769.3(3) Å³, Z=2, and R₁/wR₂/GOF=0.0206/0.0497/1.092; In_0.2Sn₆Bi_1.8Se₉ crystallizes in orthorhombic space group Cmc2₁ (No. 36) with a=4.1810(8) Å, b=13.799(3) Å, c=31.953(6) Å, V=1843.4(6) Å³, Z=4, and R₁/wR₂/GOF=0.0966/0.2327/1.12. InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ are isostructural with CuBi₅S₈ and Bi₂Pb₆S₉ phases, respectively. The structures of InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉ feature a three-dimensional framework containing slabs of NaCl-(311) type with varied thicknesses. Calculations of the electronic structure and measurements of electrical conductivity indicate that these materials are semiconductors with narrow band gaps. Both compounds show n-type semiconducting properties with Seebeck coefficients −270 and −230 μV/K at 300 K for InSn₂Bi₃Se₈ and In_0.2Sn₆Bi_1.8Se₉, respectively.     

Synthesis crystal structure and ionic conductivity of Ca0.5Bi3V2O10 and Sr0.5Bi3V2O10

Two new compounds Ca_0.5Bi₃V₂O₁₀ and Sr_0.5Bi₃V₂O₁₀ have been synthesized in the ternary system: MO-Bi₂O₃-V₂O₅ system (M=M²⁺). The crystal structure of Sr_0.5Bi₃V₂O₁₀ has been determined from single crystal X-ray diffraction data, space group and Z=2, with cell parameters a=7.1453(3) Å, b=7.8921(3) Å, c=9.3297(3) Å, α=106.444(2)°, β=94.088(2)°, γ=112.445(2)°, V=456.72(4) Å³. Ca_0.5Bi₃V₂O₁₀ is isostructural with Sr_0.5Bi₃V₂O₁₀, with, a=7.0810(2) Å, b=7.8447(2) Å, c=9.3607(2) Å, α=106.202(1)°, β=94.572(1)°, γ=112.659(1)°, V=450.38(2) Å³ and its structure has been refined by Rietveld method using powder X-ray data. The crystal structure consists of infinite chains of (Bi₂O₂) along c-axis formed by linkage of BiO₈ and BiO₆ polyhedra interconnected by MO₈ polyhedra forming 2D layers in ac plane. The vanadate tetrahedra are sandwiched between these layers. Conductivity measurements give a maximum conductivity value of 4.54×10⁻⁵ and 3.63×10⁻⁵ S cm⁻¹ for Ca_0.5Bi₃V₂O₁₀ and Sr_0.5Bi₃V₂O₁₀, respectively at 725 °C.     

Comparative study of LaNiO3 and La2NiO4 catalysts for partial oxidation of methane

The catalytic activity and stability of LaNiO₃ and La₂NiO₄, prepared using a citric acid complex method, have been investigated for partial oxidation of methane (POM) to synthesis gas. The catalysts were characterized by thermo-gravimetric analysis (TG), temperature-programmed reduction (TPR) and temperature-programmed desorption of ammonia (NH₃-TPD). The results show that the catalytic activity and stability of La₂NiO₄ are higher than those of LaNiO₃, due to the stronger interactions between Ni and La₂O₃ in La₂NiO₄ and to its lower acidity as demonstrated by TPR and NH₃-TPD. TG result indicates that carbon deposition occurs on both catalysts, and the carbon species deposited on La₂NiO₄ are mainly metal carbides, while on LaNiO₃ are mainly graphite.     

Infrared spectroscopy and the structure of La0.33Zr2(Po4)3-Yb0.33Zr2(PO4)3 solid solutions

Solid solutions of double orthophosphates of zirconium and rare earth lanthanum and ytterbium (La_0.33Zr₂(PO₄)₃-Yb_0.33Zr₂(PO₄)₃) that belong to the NASICON (NZP) structural type are synthesized and studied by IR spectroscopy. The factor-group analysis of P-O vibrations in phosphates with P3 (La_0.33Zr₂(PO₄)3) and P3c (Yb_0.33Zr₂(PO₄)₃) space groups allows us to assign the intermediate representatives of this series to two different space groups by their IR spectra, which is difficult to perform based on powder X-ray diffraction results. A morphotropic transition P3 → P3 c is found to occur near the La_1/18Yb_5/18Zr₂(PO₄)₃ composition.