Cu triggered fluorescence sensor based on fluorescein derivative for Pd detection

This Letter describes the synthesis of a novel fluorescein-based derivative used as the fluorescence sensor for Pd²⁺ detection. The sensor can show highly selective and sensitive ‘off-on’ fluorescence response only in the presence of Cu²⁺ as a synergic trigger, which presents a new strategy for Pd²⁺ detection method.     

Quinoline-based highly selective and sensitive fluorescent probe specific for Cd2+ detection in mixed aqueous media

Quinoline-based fluorescent probe as a recognition unit was designed and synthesized in this study. The probe R1 displayed excellent selectivity and sensitivity for cadmium ions (Cd²⁺) over a wide range of metal ions in acetonitrile-water (MeCN-H₂O) mixed solution. In order to better understand the recognition mechanism between probe and Cd²⁺, the density functional theory calculations were performed. Finally, the colorimetric experiment result was observed and conveniently monitored by the naked eye, and a visual detection limit of 4 × 10^?6 mol L^?1 was achieved. These experimental results indicated the promising potential of the probe to detect Cd²⁺ in biological system. Furthermore, the probe R1 was successfully used for the highly sensitive detection of Cd²⁺ in living cells.     

Cationic Pd(II)-catalyzed arylative cyclization of N-(2-formylaryl)alkynamides: An efficient route to 2-quinolinones

A cationic palladium complex catalyzed arylative cyclization reaction of N-(2-formylaryl)alkynamides with arylboronic acids was developed. This new process provides an efficient way for the synthesis of functionalized 2-quinolinones in good to excellent yields under mild conditions. Some control experiments were conducted to explain the possible mechanism for the formation of the products.     

A stable chemiluminophore,adamantylideneadamantane 1,2-dioxetane: from fundamental properties to utilities in mechanochemistry and soft crystal science

Chemiluminescence (CL) is a luminescence phenomenon originated by a “chemical reaction.” CL provides a basis for real-time imaging technology in materials science. In fact, a CL reaction is easily triggered in general and makes it possible to track its progress in a target material by highly sensitive photon detection. Recently, real-time CL imagings became breakthrough techniques for analyzing the molecular mechanisms of failures of polymeric materials and of reactions and phase transitions in soft crystals. In the CL imaging techniques, adamantylideneadamantane 1,2-dioxetane (Adox) has been adopted as a stable core structure of chemiluminophores. That is, Adox is an essential seed compound to design a chemiluminophore with a desired molecular function. To support developments of real-time CL imaging techniques, we review the chemistry of Adox as a representative stable chemiluminophore including scientific history and utilities of Adox and its derivatives.     

A new highly sensitive and selective fluorescent probe for Hg2+ and its application in living cells

Abstract

A new coumarin-based probe (HgP) with two “S” groups was designed and synthesized The probe HgP exhibited a fast response time (<2?min) and high selectivity (DL, 2.2?×?10^?7?mol/L). Furthermore, its capability of biological application was stu died, and the results showed that it could be applied to recognize Hg²⁺ in living cells (HK2 cells).     

Synthesis and characterization of Pd(IMe)2, and its reactivity by C-S oxidative addition of DMSO

Two-electron reduction of PdX₂(NHC)₂ with Groups 1, 2 metals (K, Mg) is a convenient route to Pd(NHC)₂ complexes including Pd(IMe)₂ (2a), isolated and crystallographically characterized as the least sterically encumbered d¹⁰ M(0)L₂ species to date. 2a exhibits a regular linear geometry and modest Lewis acidity to coordinating solvents and additional IMe. In contrast to its analogs with bulkier NHC = I^tBu and IPr, 2a undergoes cleanly net oxidative addition of the Me-S(O)Me bond of DMSO, forming trans-PdMe(S(O)Me)IMe₂ (3) at RT. DFT calculations suggest this reaction to proceed by substitution of IMe by κS-DMSO followed by concerted C-S oxidative addition to Pd with a single IMe, with a preference of ca. 10 kcal/mol in the effective ΔG_s^‡ over the direct pathway. Calculations also identify two facile intramolecular pathways for racemization of Pd(II) methylsulfinyl complexes at sulfur.     

A selective and sensitive off–on probe for palladium and its application for living cell imaging

A new rhodamine B derivative T1 has been rationally synthesized and displayed selective Pd(Ⅱ)-amplified absorbance and fluorescence emission above 540 nm in methanol–water. Upon the addition of Pd(Ⅱ), the spirolactam ring was unfolded and a 1:1 metal-ligand complex formed, which can be used for ‘‘naked-eyes" detection. In addition, fluorescence imaging experiments of Pd~(2+) in HepG2 living cells showed its valuable application in biological systems.     

Highly selective detection of Cu2+ based on a thiosemicarbazone triphenylacetylene fluorophore

A novel thiosemicarbazone fluorophore (3) was successfully synthesized in 3 steps via Sonogashira coupling and Knoevenagel condensation using baker's yeast (Saccharomyces cerevisiae) as a biocatalyst. Compound 3 contains triphenylacetylene, which acts as a fluorophore, and thiosemicarbazone, which acts as a copper probe. Compound 3 exhibited highly selective detection of Cu²⁺ ions based on photoinduced electron transfer (PET) in 10 mM HEPES buffer pH 7.4/propylene glycol (70% (v/v)). A linear relationship was observed for Cu²⁺ concentrations between 0.1 nM and 10 μM, and the detection limit of the method was 0.14 nM. Additionally, 3 was utilized to detect Cu²⁺ in wastewater with satisfactory results, which highlighted its potential for real sample applications.     

基于ESIPT原理的Cu^2+荧光探针

合成了一种基于激发态分子内质子转移(ESIPT)的Cu^2+荧光探针L。通过Job’s曲线、MS和1H NM R研究了探针L对Cu^2+的识别机理。与其他金属离子共存时,探针L对Cu^2+表现出良好的选择性和灵敏度。加入Cu^2+后,探针L的荧光强度逐渐降低;在365 nm紫外光的照射下,探针L溶液的颜色由蓝色变成无色。探针L具有较低的检出限(0.47μmol/L)和短的响应时间(5s)。     

A highly sensitive and selective resonance Rayleigh scattering method for Hg2+ based on the nanocatalytic amplification

In 0.2 mol/L HCl–0.22 mol/L HNO₃ medium, trace Hg²⁺ catalyzed NaH₂PO₂ reduction of HAuCl₄ to form gold nanoparticles (AuNPs), which exhibited a strong resonance Rayleigh scattering (RRS) effect at 370 nm. With increasing of [Hg²⁺], the RRS effect enhanced due to more AuNP generated from the catalytic reaction. Under the chosen conditions, the enhanced RRS intensity at 370 nm is linear to Hg²⁺ concentration in the range of 5.0–450 × 10⁻⁹ mol/L, with a detection limit of 0.1 nmol/L. This RRS method was applied for the determination of Hg in water samples, with high sensitivity and good selectivity, and its results were agreement with that of atomic fluorescence spectrometry.     

A coumarin-based fluorescent probe for selective detection of Cu2+ in water

Fluorescent Red GK, a commercially available coumarin-based dye, was developed as a “turn-off” fluorescent probe for detection of Cu²⁺ in aqueous solution. It exhibited high selectivity and sensitivity at room temperature. Upon addition of Cu²⁺, the strong fluorescence of Fluorescent Red GK was severely quenched and its color changed from orange to colorless under illumination with a UV lamp; the color of the solution also changed from pink to colorless. So, it can be used as a specific colorimetric and fluorescent probe for Cu²⁺ with a detection limit as low as 0.0634?μM.     

A novel probe for chemiluminescent image detection of proteins in two-dimensional gel electrophoresis

Carrier ampholytes were found to enhance the chemiluminescence (CL) emission from the 3-aminophthalic hydrazide (luminol)-hydrogen peroxide system. They can be used as a chemiluminescent probe for rapid detection of major proteins in gels. This probe attracted much interest due to its ability to attach proteins, and to the possibility to combine it with separation techniques generating the CL emission directly. Increased signal intensity was achieved employing optimized concentrations of the carrier ampholyte enhancer. The binding of carrier ampholyte to proteins was found to occur at the pI of the proteins. Proteins from different regions of the gels were identified by their matrix-assisted TOF mass spectra and by appropriate database search, the results illustrating the possibility of major protein detection in human serum. Direct CL image detection with the carrier ampholyte probe can be applied for the detection of characteristic proteins in patients, i.e., proteins which cannot be detected without the probe.     

A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

A Lantern-Shaped Pd(II) Cage Constructed from Four Different Low-Symmetry Ligands with Positional and Orientational Control: An Ancillary Pairings Approach

One of the key challenges of metallo-supramolecular chemistry is to maintain the ease of self-assembly but, at the same time, create structures of increasingly high levels of complexity. In palladium(II) quadruply stranded lantern-shaped cages, this has been achieved through either 1) the formation of heteroleptic (multi-ligand) assemblies, or 2) homoleptic assemblies from low-symmetry ligands. Heteroleptic cages formed from low-symmetry ligands, a hybid of these two approaches, would add an additional rich level of complexity but no examples of these have been reported. Here we use a system of ancillary complementary ligand pairings at the termini of cage ligands to target heteroleptic assemblies: these complementary pairs can only interact (through coordination to a single Pd(II) metal ion) between ligands in a cis position on the cage. Complementarity between each pair (and orthogonality to other pairs) is controlled by denticity (tridentate to monodentate or bidentate to bidentate) and/or hydrogen-bonding capability (AA to DD or AD to DA). This allows positional and orientational control over ligands with different ancillary sites. By using this approach, we have successfully used low-symmetry ligands to synthesise complex heteroleptic cages, including an example with four different low-symmetry ligands.     

A pinacol boronate caged NIAD-4 derivative as a near-infrared fluorescent probe for fast and selective detection of hypochlorous acid

A pinacol boronate caged NIAD-4 derivative was demonstrated to be a near-infrared fluorescent probe for fast and selective detection of hypochlorite over other ROS species.     

Synthesis and spectroscopic investigations of Rh(III) and Pd(II) complex compounds with N-(pyridine-2-yl)morpholine-4-carbothioamide

The present paper describes the synthesis and spectral properties of Rh(III) and Pd(II) coordination compounds with N-(pyridine-2-yl)morpholine-4-carbothioamide (PMCTA). The compounds have the general composition [RhL₂Cl₂]Cl · C₂H₅OH (1), [PdL₂]Cl₂ (2), [PdL₂](ClO₄)₂ · 2C₃H₆O (2a), [PdLCl₂] · 2H₂O (3). All complexes were characterized by elemental analysis, IR, ¹H NMR, ¹³C NMR, XPS and UV–Vis spectra. It has been shown that PMCTA behaves as a bidentate (N,S)-ligand, forming six membered metallocycles and coordinating to the metal ion through the carbothioamide sulfur atom and the pyridine nitrogen atom. The UV–Vis spectra suggest that the Pd(II) complexes are square planar, while the Rh(III) complex has an octahedral geometry. The molecular structure of the Pd(II) complex with PMCTA (M:L = 1:2) was determined by single-crystal X-ray diffraction.     

A highly sensitive and selective naked-eye probe for detection of Fe3+ based on a 2,5-bis[3-benzyl-2-methylbenzothiazole]-croconaine

A highly sensitive and selective naked-eye probe, 2,5-bis[3-benzyl-2-methylbenzothiazole]-croconaine (BMC) for sensing of Fe³⁺ was synthesized and characterized. The BMC can selectively recognize Fe³⁺ among the test cations (Ni²⁺, Mg²⁺, Cu²⁺, Ca²⁺, Na⁺, K⁺, Cr³⁺, Ag⁺, Ba²⁺, Zn²⁺, Pb²⁺, Al³⁺, Fe³⁺, Cd²⁺, Co²⁺) in DMF/H₂O (4:1, v/v). The binding constant of BMC-Fe³⁺ was evaluated by using Benesi-Hildebrand plot. Simultaneously, the binding mode of BMC-Fe³⁺ was supporting by Job's plot, ESI-MS, FT-IR and ¹H NMR. Correspondingly, the morphology of chelate complex was investigated by FESEM. Moreover, Fe³⁺ and EDTA could be employed as inputs and the fluorescence emission intensity which was 816 nm as output so that a molecular logic gate could be realized.     

A new fluorescent probe of rhodamine B derivative for the detection of copper ion

A new fluorescent probe, rhodamine B hydrazide oxalamide (RBHO), which shows very weak fluorescence, was synthesized, and its fluorescence could be substantially enhanced by the addition of copper ion. The probe shows a high selectivity and sensitivity to copper ion by forming a 1:1 complex in acetonitrile, and the chelating is reversible. Limit of detection for copper ion in acetonitrile was found to be 3.7 × 10⁻⁸ mol L⁻¹. It was also found that copper ion could catalyze the hydrolysis of the probe in 50% (v/v) buffered (10 mM Tris–HCl, pH 7.0) water/acetonitrile giving a highly fluorescent product, and the fluorescence detection of copper ion was developed in this neutral buffered media with a detection limit of 6.4 × 10⁻⁷ mol L⁻¹. Determination of copper ion in water and synthetic samples in the presence of different interfering metal ions was successfully carried out with the new probe RBHO.     

FI automatic method for the determination of copper(II) based on coproporphyrin I-Cu(II)/TCPO/H(2)O(2) chemiluminescence reaction for the screening of waters

In this paper, an automatic method for the screening of water samples containing Cu(II) was proposed, based on peryoxalate chemiluminescence reaction using coproporphyrin I as fluorophor compound to provide selectivity and a simple flow injection (FI) chemiluminescence detector (CLD). FI system conditions were chosen in order to distinguish samples over or under legislation limit established (50 μg l⁻¹) with high reliability. The detection limit found was 9 μg l⁻¹ and the linear dynamic range was 15-125 μg l⁻¹ of Cu(II). Repeatibility and reproducibility studies gave good precision and accuracy with recovery near 100%. Under these conditions, the method resulted selective and only Fe(II), Fe(III) and Pb(II) could interfere, but at a concentration level higher than their normal concentration in waters. The proposed method was found to be highly reliable for screening purposes and it was successfully applied to the screening of a variety of real water samples.     

A gold nanorod based colorimetric probe for the rapid and selective detection of Cu2+ ions

A gold nanorod (AuNR) based colorimetric probe was reported for the rapid and selective detection of Cu(2+) ions. The probe was fabricated by functionalizing cysteine (Cys) onto AuNR (Cys-AuNR) with an aspect ratio of 2.3. The strong coordination of Cu(2+) with cysteine resulted in a stable Cys-Cu-Cys complex, and induced the aggregation of the colloidal nanorods along with a rapid colour change from blue-green to dark gray. Potential factors affecting the performance of the probe for the detection of Cu(2+) were carefully optimized, including the pH value of the buffer media, the concentration of cysteine, and the kinetics for the coordination of Cu(2+) with Cys-AuNR. Under optimal conditions, the developed colorimetric method gave a linear range of 1-100 μM for Cu(2+), and a detection limit (3s) of 0.34 μM. Moreover, the developed method exhibited excellent selectivity for Cu(2+), and quantitative spike-recoveries from 90% to 107% in environmental water samples. The proposed colorimetric approach can in principle be used to detect other metal ions by functionalizing various specific ligands onto the AuNR that can selectively bind the other target metal ions.