A two-electron group model theory for radio-frequency ionization ofnoble gases with turbulent flow

Equations are derived for predicting the current-voltage characteristic curves of axial RF discharges in noble gases, with turbulent flow. The electrons are considered to be made up of two Maxwellian groups: bulk and tail electrons. The bulk electrons are described by a temperature T_b, and have kinetic energies (1/2 mv²=eV) from 0 to eV _l (eV_l=the threshold energy of the first dominant inelastic collision process). The electrons of the depressed tail of the distribution function are described by another temperature, T_t<T_b, and have (eV>eV_l). The terms in these equations correspond to the prevailing processes occurring inside the noble gas discharge. The rate coefficients given are derived, based on the two-electron group model. The effect of the high velocity flow is accounted for by the terms giving the divergence of the flux of particles in the redirection of flow in each of the continuity equations for the primary species and by adding a diffusion coefficient due to turbulence to the static discharge diffusion coefficients of the ions and metastables     

The type and extent of non-LTE in argon arcs at 0.1-10 bar

A 30-A, 3-mm-diameter, wall-stabilized argon arc with 1% hydrogen is examined spectrometrically at pressures of 0.1-10 bar. Values of T_g, and T_exa diverge as pressure decreases below 5 bar (n_e⩽1×10¹⁷ cm^-3) at r=0. T_exβ is 20-40% larger than the other temperatures. The results are dependent on the transition probability scale used     

Electrical discharge initiation and a macroscopic model forformative time lags

Formative times in electrical discharges in overvoltaged gaps are analyzed with a model having no spatial dependence and with simple assumptions about discharge channel temperature T and discharge voltage. The model treats the early temporal evolution of the discharge. Specifically, the dissipative voltage drop, V*, across the discharge is taken to be a step function of T. Thermal quasi-equilibrium is assumed in the discharge medium, and it is shown that d(In t_d)/_d(In &thetas;)=-1, i.e., &thetas;t_d=constant, where &thetas; is the fractional overvoltage and t_d is the formative time lag, in agreement with measured values of t_d for much of the experimentally explored range of &thetas;. Highly-time-resolved (~92 ps) experimental data are presented for the first 10 ns of electrical discharge initiation; these data suggest that the authors' model should provide a reasonable representation of t _d when t_d>10-100 ns     

Theory of the cathode sheath in a vacuum arc

A previous theory of the plasma sheath transition starting from the charge exchange model for ion collisions is extended to account for ionization and recombination. It is applied to the quasi-neutral boundary layer (presheath) in front of the cathode sheath of a vacuum arc. An essential potential and density difference between the sheath edge and cathodic plasma ball is found. This difference is accounted for in a unified theory of the arc cathode based on G. Ecker's (1971) existence diagram method, which indicates possible areas of arc operation in the T_cj plane, where T_c is the spot temperature and j is the current density. A numerical evaluation for Cu gives the results which are qualitatively similar to Ecker's theory. The existence areas are quantitatively enlarged and shifted to lower current densities     

Effect of a high-frequency field on the reflection of ion acousticwaves from the sheath at a grid

Experiments are described which show that the reflection coefficient for ion acoustic waves (IAW) from the sheath at a grid is affected by an HF electric field with a frequency f_HF≲5f_pi(f_pi =ion plasma frequency). For peak-to-peak amplitudes of the HF voltage drop across the sheath Φ₀≲k_B T_e/e and f_HF>f _pi, the energy distribution of the ions passing through the grid develops a hot tail and the reflected wave suffers enhanced Landau damping. If Φ₀≳k_BT_e/e and f_HF<f_pi, a large-amplitude IAW is excited at the grid; a well-defined ion beam is formed; and local growth of the reflected wave is observed. Test waves launched from the grid show the same propagation characteristics as the reflected waves     

Pressure limits for the vacuum arc deposition technique

Observations of the cathodic copper plasma expansion at low pressures of He, Ar, and SF₆ showed that, for background gas mass densities of ρ_g=1 to 4×10^-4 kg/m ³ and higher, the plasma and gas are separated into two volumes. A shock wave acts as a boundary between the two volumes. The boundary attains a stationary position once its expansion velocity decreases to the velocity of sound in the background gas. This position corresponds to a distance R_c to the cathode that agrees with a snowplow expansion model, giving R_c ^βf=E_r, where f is a function of the arc current and background gas characteristics, E _r is the erosion rate of the cathode, and β varies between 2.1 and 2.5. The interaction model is based on kinetic energy exchanges between two gas-like volumes without other energy losses. A maximum pressure limit for vacuum arc deposition is set for ρ_g /I=2 to 9×10^-6 kg/m³ A     

Electron distribution function relaxation in monatomic gases

The authors discuss an analytic solution of the Boltzmann equation which describes the relaxation in time of the electron distribution function for electrons in a plasma derived from the monatomic gases He, Ne, Ar, and Xe. It is assumed that there are no perturbing forces on the electrons and that at t=0 they have a Maxwellian distribution function corresponding to an average energy of 2 eV. The electrons then lose energy through elastic collisions with neutrals and eventually energy-equilibrate with the neutrals, which are assumed to be cold. The evolution of the electron distribution function in time and velocity space is calculated for each gas. This model is approximately correct for the afterglow period of an electrical discharge in a monatomic gas. It is possible to calculate a time which is a measure of the decay time of the electron energy in an afterglow plasma     

Disproof of Cowling's theorem

T.G. Cowling's theorem (1934) is a general statement that axisymmetric dynamos cannot be constructed in astrophysical bodies. The theorem is based on the assumption that the electrical conductivity is a scalar, σE=J. In a counterargument, the author demonstrates that this statement is not valid for a diffuse plasma. He suggests that, in an astrophysical plasma, collisional processes can violate Cowling's theorem by scattering current into a current-free channel     

Analytic expression for the electric potential in the plasma sheath

An expression for the spatial dependence of the electric potential in a collisionless and source-free planar plasma sheath is presented. This expression is derived by analogy with Child's law and approaches Child's law asymptotically as the potential drop φ_W across the sheath becomes large, |eφ_W/kT_e|>10⁴. Here k is Boltzmann's constant, T_e is the electron temperature, and e is the electronic charge. Comparison with numerical solutions of the model equations indicates that the sheath thickness and potential variation predicted by this improved Child's law are accurate for |eφ_W/kT_e|>10. In contrast, the authors find that Child's law is accurate only when |e φ_W/kT_e|>10⁴     

Validity conditions for complete and partial local thermodynamicequilibrium of nonhydrogenic level systems and their application tocopper vapor arcs in vacuum

Validity conditions for complete and partial local thermodynamic equilibrium (CLTE and PLTE) of homogeneous, time-dependent, and optically thin plasmas are derived. For Cu I, electron densities of n_e⩾(5×10²²-5×10²³ ) m^-3 are required for the establishment of CLTE. For Cu I and Cu II, n_e⩾(5×10²¹-5×10²¹ -5×10²²) m^-3 is necessary for PLTE (for electron temperatures of 1-2 eV). Application to low-current copper vapor arcs in vacuum shows that CLTE can be expected for r<200-600 μm (r=distance from the cathode spot). A further limitation follows for temperatures of 2 eV or higher if diffusion effects are taken into consideration. Consequently, the use of the LTE formulas in plasma spectroscopy of low-current vacuum arcs is very limited     

Acoustic double layers in multispecies plasma

Particle simulation in a one-dimensional bounded system is used to examine the formation of acoustic double layers in the presence of two ion species. Double-layer formation depends critically on the details of the distribution functions of the supporting ion populations, and their relative drifts with respect to the electrons. The effect of having two ion components, an H⁺ and an O⁺ beam, on double-layer evolution from ion acoustic turbulence driven by an electron drift relative to the H⁺ beam of ≈0.5u _e, where uu_e is the electron thermal speed, is examined. The ratio of ion drifts is taken to be consistent with acceleration by a quasi-static auroral potential drop (i.e. V _H/V_O=√M_O/ M_H=4.0). Acoustic double layers form in either ion species on the time scale τ≈100ω_ps^-1, where ω_ps is the ion plasma frequency for species `s' and s=H or O, and for drifts relative to the electrons lower than that required for double layer formation in simulations of single ion component plasma     

A revised theoretical model of vacuum arc spot plasmas

The quasi-stationary hemispherical expansion of the cathodic plasma in vacuum arcs can be modeled with hydrodynamic two-fluid equations. In any case, the state of the plasma is determined by the only variable (I/r)^2/5 (with current I , distance r). In order to avoid some deficiencies of the model (as published) and to investigate more carefully the dependence of the plasma parameters on the arc current, the known analytic solution to the problem is improved by taking into consideration the variability of the Coulomb logarithm and the dependence of the boundary conditions on I. These effects are treated separately. Examples are used to illustrate the new results, with particular emphasis on ion acceleration. The influence of the above factors turns out to be rather unimportant. Quantitatively, they cause some shifts, but no qualitative change of the basic behavior of the plasma is seen     

Excitation of slow EM waves in a waveguide having a thin, annularplasma sheet

A thin, annular plasma sheet in a waveguide slows down the phase velocity of electromagnetic modes in a plasma density window for frequencies below the electron cyclotron frequency via Cerenkov interaction. At lower densities, the plasma is not effective enough to reduce the phase velocity of the EM wave below c. At higher densities the plasma expels the radiation field, leading to enhancement of phase velocity. The lowest mode having azimuthal number l=0 is most unstable. The radial mode having amplitude maximum at r=a, viz the plasma boundary, has the largest growth rate     

Recombination lasing in heliumlike silicon: a possible path to thewater window

A major goal of current X-ray laser research is the achievement of gain in the 23.3-43.7 Å wavelength region, known as the `water window'. Silicon is the lowest atomic number element for which all the heliumlike 3-2 transitions lie in this region. The authors examine the fundamental kinetics of recombination lasing in this species, and conclude that the Si XIII 1s3d¹D ₂-1s2p¹P₁ line at 39.1 Å is an attractive candidate for recombination-pumped lasing. Attainment of gain in this line is somewhat more energetically favorable than for the hydrogenic Al XIII 3-2 transitions, but radiative trapping may be somewhat more troublesome than for H-like Al     

Initial stage of discharge current growth in a triggered vacuum gap

The dynamics of light emission accompanying the initial stage of electric discharge in a substantially undervoltaged vacuum gap was studied with a knock-down model using high-speed photorecording. Voltage across the gap was maintained within the range of 0.5-5 kV, which corresponded to the minimum operating voltage of vacuum-triggered gaps. It was found that front layers of a plasma cloud near a cathode, formed by a firing pulse, scattered at a speed of (5-8)×10⁶ cm/s. During firing, a channel directed to the opposite electrode was formed from the plasma cloud near the cathode. It was found that the average switch-on delay time of the triggered vacuum gap is ~d(1+h/d) I_f^-α, where d is the interelectrode gap length, h is the trigger assembly penetration height, and I_f is the firing current     

Some interruption criteria for short high-frequency vacuum arcs

If the contacts of a vacuum interrupter open shortly before a current zero, the transient recovery voltage (TRV) can cause a reignition and reestablish the arc. When the current in a diffuse vacuum arc passes through zero, there is a distinct pause before the TRV builds up (approximately 40 ns for copper). During this pause the gap carries conduction current only with an ion component which depends on dI /dt, varying between 3 A for dI/dt=60 A/μs and 60 A for dI/dt=1235 A/μs. The ion current subsequently decays in tens or hundreds of nanoseconds. It can be distinguished from the displacement current at this time by varying dV/dt, keeping the other parameters constant. Among the interruption criteria for short high-frequency vacuum arcs, dI /dt prior to current zero and initial dV/dt are the most important. High values of dI/dt are more likely to precipitate reignitions, but breakdowns can occur after lower dI/dt's if the gap has been subjected to a high current for a relatively long time (>100 μs)     

Stimulated acceleration and confinement of deuterons in focuseddischarges. II

For pt.I see ibid., vol.16, no.3, p.368-73, June 1988. Methods of increasing, by a factor greater than five, the neutron yield/short Y _n from D-D fusion reactions in a plasma focus (PF) enhance both the D⁺-ion acceleration to energy values E _d>1-8 MeV and the ion confinement in the pinch region. Nuclear activation of C and N in the (doped) filling gas of the discharge chamber and of solid targets of C and BN bombarded by the ion beam in the direction of the electrode axis (0°) confirms earlier determination of the energy spectrum of the trapped ions (dφ_t/dE∝φ_0tE ^-m) and of the ejected beam (dφ_b/dE∝φ_0bE _d^-m, m=2.5±0.5 for 0.1 MeV≲E≲3 MeV). A Thomson (parabola) spectrometer with nanosecond time resolution determines the time of emission t( E) of the beam at 0°. Ion acceleration and trapping occur within the small (filamentary) elements of the magnetic fine structure of the pinch, which can be dispersed on a relatively large confinement volume after the pinch disintegration. It has been found that φ_t/φ_b≳10-10³ for E_d≳1 MeV, depending on Y_n     

Equilibrium lengths of railgun plasma armatures

Recent data have shown that the length of railgun plasma armatures increases with bore size. The mechanisms for plasma growth and mass loss are treated analytically through a simple thermodynamic model in which mass is added through ablation of bore materials and lost through friction. It is assumed that at the bore wall, a thin boundary layer is formed in the plasma in which the velocity is sufficiently slow that the boundary layer is left behind the bulk of the plasma. Using the scaling relations of J.D. Powell and J. Batteh (1983), a functional relationship between the plasma length l_p and bore height h of the form l_p=kh^α, where α≃0.68. Using the model developed in the present work, a linear relationship between l_p and h is derived, but the proportionality factor depends on temperature, plasma conductivity, velocity, and boundary-layer thickness. Predictions of the model are interpreted in the light of available data. The model is shown to predict lengths which are in reasonable agreement with the observed data     

The use of bubbles for plasma liners in ICF experiments

The production of thin, axially symmetric bubbles between electrodes in a plasma-focus discharge chamber at pressures below 1 torr is described. A theory of their use as plasma lines (PLs) is given. A mechanism of imploding such liners using a plasma-focus snowplow (SP) for the accumulation of magnetic energy is described. The transfer of the discharge current I from the SP to the PL should result in a substantial amplification of the dI/dt as seen by the PL, resulting in very high density of the latter. Possible applications of such dense plasma liners in ICF are mentioned     

X-ray laser research at the LULI (Palaiseau)

The X-ray laser program at Palaiseau is based on the recombination scheme in lithiumlike ions, which requires a moderate pump power and seems to be promising for the purpose of scaling to shorter wavelengths. In aluminum plasmas, peak gain values of 2-2.5 cm^-1 have been obtained at a wavelength of 105.7 Å corresponding to the 3d -5f transition, 6 ns after the top of a 2 ns laser pulse. The same transition in sulfur is emitted at 65.2 Å and has shown a gain of 1 cm^-1 in a preliminary time-integrated experiment. Simulations using a collisional-radiative model as the postprocessor of a hydrodynamic numerical code predict amplifications for the 3d-4f, 3d-5f, and 4d-5f transitions. A new experiment, in progress at the present time, has been designed to enhance the gain-length product up to 10-15 at 105.7 Å. The recently extended facilities of the LULI make it possible to produce a 6-cm-long plasma column, keeping the flux density at the same level as in the previous experiments