Gas-phase diastereoselectivity of secondary 5-substituted (X)-adamant-2-yl (X = F, Si(CH(3))(3)) cations

Secondary 5-X-adamant-2-yl cations IX (X = F, Si(CH3)3) have been generated in the gas phase (total pressure = 760 Torr) from protonation-induced defluorination of epimeric 2-F-5-X-adamantanes 1X and their kinetic diastereoselectivity toward CH318OH investigated in the 40-160 degrees C range. The experimental results indicate that the facial selectivity of IX is insensitive to the composition of the starting 1X epimers as well as to the presence and the concentration of a powerful base (N(C2H5)3). This kinetic picture, supported by B3LYP/6-31G* calculations, is consistent with a single stable pyramidalized structure for IX, that is, (Z)-5-F-adamant-2-yl (I(Z)F) and (E)-5-Si(CH3)3-adamant-2-yl cations (I(E)Si). The temperature dependence of the IX diastereoselectivity lends support to the intermediacy of noncovalent adducts [IX*CH318OH], characterized by a specific C2-H+...O18(H)CH3 hydrogen bonding interaction. Their conversion to the covalently bonded O-methylated (Z)- (II(Z)X) and (E)-5-X-adamantan-2-ols (II(E)X; X = F, Si(CH3)3) is governed by activation parameters, whose magnitude depends on the specific IX face accommodating CH318OH. The gas-phase diastereoselectivity of IX toward CH318OH is compared to that exhibited in related gas-phase and solution processes. The emerging picture indicates that the factors determining the diastereoselectivity of IX toward simple nucleophiles in the gaseous and condensed media are completely different.     

Origin of diastereofacial selectivity in tertiary 2-adamantyl cations.

The intrinsic factors governing the diastereofacial selectivity of 2-methyl-5-X-2-adamantyl cations (X = F (I(F)), Si(CH(3))(3) (I(Si))) toward a representative nucleophile, i.e., methanol, have been investigated in the gas phase at 750 Torr and in the 20-80 degrees C temperature range. The kinetic results indicate that CH(3)OH addition to I(F) proceeds through tight transition structures (TS(F)(syn) and TS(F)(anti)) characterized by advanced C-O bonding. The same interactions are much less pronounced in the comparatively loose transition structures involved in the CH(3)OH addition to I(Si) (TS(Si)(syn) and TS(Si)(anti)). The experimental evidence indicates that the activation barriers for the anti addition to I(F) and I(Si) are invariably lower than those for the syn attack. Large adverse entropic factors account for the preferred syn diastereoselectivity observed in the reaction with I(F). Entropy plays a minor role in the much looser transition structures involved in the reaction with I(Si), which instead exhibits a preferred anti diastereoselectivity. Comparison of the above gas-phase results with related theoretical and solution data suggests that the diastereofacial selectivity of I(F) and I(Si) measured in solution arises in part from the differential solvation of the two faces of the pyramidalized ions.     

Dimethyl ether chemical ionization of arylalkylamines

The gas-phase reactions of dimethyl ether (DME) ions with a number of biologically active arylalkylamines of the general formula R(1)R(2)C(6)H(3)CHR(3)(CH(2))(n)NR(4)R(5), where R(1) = H or OH, R(2) = H, F, NO(2), OH or OCH(3), R(3) = H or OH, R(4) and R(5) = H or CH(3), have been studied by means of chemical ionization mass spectrometry. Under the experimental conditions used, the most abundant DME ion is the methoxymethyl cation (CH(3)OCH(2)(+), m/z 45). The unimolecular metastable decompositions of the [M + 45](+), [M + 13](+) and [M + 15](+) adducts formed have been interpreted in terms of the initial site of reaction with the amines and the presence of different functional groups in the molecule. This has permitted establishment of general fragmentation patterns for the adducts, and their correlation with structural features of the molecules. The main site of reaction of the ion CH(3)OCH(2)(+) with the amines seems to be the amino group, particularly if the amine is primary, although a competition with attack on the aromatic ring and especially on the benzylic hydroxy group is observed. In a few cases the reaction mechanisms have been elucidated through the use of deuterated amines obtained by H/D exchange with D(2)O.     

CH3SS与OH自由基反应机理的理论研究

应用密度泛函理论(DFT)对CH3SS与OH自由基单重态反应机理进行了研究.在B3PW91/6-311+G(d,p)水平上优化了反应通道上各驻点(反应物、中间体、过渡态和产物)的几何构型,用内禀反应坐标(IRC)计算和频率分析方法对过渡态进行了验证.在QCISD(T)/6-311++G(d,p)水平上计算了各物种的单点能,并对总能量进行了零点能校正.研究结果表明,CH3SS与OH反应为多通道反应,有5条可能的反应通道.反应物首先通过不同的S—O键相互作用形成具有竞争反应机理的中间体IM1和IM2.再经过氢迁移、脱氢和裂解等机理得到主要产物P1(CH2SS+H2O),次要产物P2(CH2S+HSOH),P3(CH3SH+1SO)和P4(CH2SSO+H2),其中最低反应通道的势垒为174.6kJ.mol-1.     

Combination of neural networks and DFT calculations for the comprehensive analysis of FDMPO radical adducts from fast isotropic electron spin resonance spectra

The 4-hydroxy-5,5-dimethyl-2-trifluoromethylpyrroline-1-oxide (FDMPO) spin trap is very attractive for spin trapping studies due to its high stability and high reaction rates with various free radicals. However, the identification of FDMPO radical adducts is a challenging task since they have very comparable Electron Spin Resonance (ESR) spectra. Here we propose a new method for the analysis and interpretation of the ESR spectra of FDMPO radical adducts. Thus, overlapping ESR spectra were analyzed using computer simulations. As a result, the N- and F-hyperfine splitting constants were obtained. Furthermore, an artificial neural network (ANN) was adopted to identify radical adducts formed during various processes (e.g., Fenton reaction, cleavage of peracetic acid over MnO(2), etc.). The ANN was effective on both "known" FDMPO radical adducts measured in slightly different solvents and not a priori "known" FDMPO radical adducts. Finally, the N- and F-hyperfine splitting constants of ·OH, ·CH(3), ·CH(2)OH, and CH(3)(C═O)O(·) radical adducts of FDMPO were calculated using density functional theory (DFT) at the B3LYP/6-31G(d,p)//B3LYP/6-31G++//B3LYP/EPR-II level of theory to confirm the experimental data.     

Electronic structure study of the initiation routes of the dimethyl sulfide oxidation by OH

In the present work the potential energy surface (PES) corresponding to the different initiation routes of the oxidation mechanism of DMS by hydroxyl radical in the absence of O(2) has been studied, and connections among the different stationary points have been established. Single-point high level electronic structure calculations at lower level optimized geometries have been shown to be necessary to assure convergence of energy barriers and reaction energies. Our results demonstrate that the oxidation of DMS by OH turns out to be initiated via three channels: a hydrogen abstraction channel that through a saddle point structure finally leads to CH(3)SCH(2) + H(2)O, an addition-elimination channel that firstly leads to an adduct complex (AD) and then via an elimination saddle point structure finally gives CH(3)SOH and CH(3) products, and a third channel that through a concerted pathway leads to CH(3)OH and CH(3)S. The H-abstraction and the addition-elimination channels initiate by a common pathway that goes through the same reactant complex (RC). Our theoretical results agree quite well with the branching ratios experimentally assigned to the formation of the different products. Finally, the calculated equilibrium constants of the formation of the complex AD and the hexadeuterated complex AD from the corresponding reactants, as a function of the temperature, are in good accordance with the experimental values.     

A kinetic and spectroscopic study of the CH3I-Cl and ICH2I-Cl adducts

Laser-induced fluorescence from the CH3I-Cl and ICH2I-Cl adducts formed in association reactions between chlorine atoms and CH3I and CH2I2 has been observed for the first time. The LIF excitation and dispersed fluorescence spectra have been measured in the range 345-375 nm and 380-480 nm, respectively, at 204 and 296 K. The excitation spectra exhibit vibrational fine structure, and a semiquantitative analysis of the spectra yields a similar binding energy for both adducts of approximately 60 kJ mol(-1). The adduct fluorescence is efficiently quenched by N2 and exhibits a zero-pressure lifetime of approximately 25-30 ns. Using LIF excited from the CH3I-Cl and ICH2I-Cl adducts, the kinetics of the reactions of atomic chlorine with methyl iodide and diiodomethane have been investigated, the results showing that both reactions proceed via two independent channels, an association reaction to form the adduct and a bimolecular abstraction reaction. At T approximately 200 K, the association reaction is predominant, and CH3I-Cl formation is irreversible, with rate coefficients for adduct formation found to be pressure-dependent and in reasonable agreement with the literature. At approximately 200 K, removal of the adduct is dominated by reaction with radical species (CH3 and ClSO) and by self-reaction, which proceed at close to the gas kinetic limit. At 296 K, CH3I-Cl formation is reversible, and the equilibrium constant, K(p) = (70.9 +/- 27.4) x 10(3) atm(-1), was determined, which is in excellent agreement with the literature, and the adduct does not significantly react with CH3I. The uncertainty is at the 95% confidence level (2sigma) and includes systematic errors. At approximately 200 K, the ICH2I-Cl adduct is again stabilized, with pressure-dependent rate coefficients reaching the high pressure limit at lower pressures than for the Cl + CH3I reaction. At room temperature, the ICH2I-Cl adduct is removed via an additional unimolecular decomposition channel, which dominates over the reversible decomposition channel to reform Cl + CH2I2. Neither adduct was observed to undergo significant reaction with molecular oxygen at approximately 200 or 296 K, with an upper limit rate coefficient determined as k < 10(-16) cm(3) molecule(-1) s(-1).     

Activation of the C-I and C-OH bonds of 2-iodoethanol by gas phase silver cluster cations yields subvalent silver-iodide and -hydroxide cluster cations

The gas phase ion-molecule reactions of silver cluster cations (Ag(n)(+)) and silver hydride cluster cations (Ag(m)H(+)) with 2-iodoethanol have been examined using multistage mass spectrometry experiments in a quadrupole ion trap mass spectrometer. These clusters exhibit size selective reactivity: Ag(2)H(+), Ag(3)(+), and Ag(4)H(+) undergo sequential ligand addition only, while Ag(5)(+) and Ag(6)H(+) also promote both C-I and C-OH bond activation of 2-iodoethanol. Collision induced dissociation (CID) of Ag(5)HIO(+), the product of C-I and C-OH bond activation by Ag(5)(+), yielded Ag(4)OH(+), Ag(4)I(+) and Ag(3)(+), consistent with a structure containing AgI and AgOH moieties. Ag(6)H(+) promotes both C-I and C-OH bond activation of 2-iodoethanol to yield the metathesis product Ag(6)I(+) as well as Ag(6)H(2)IO(+). The metathesis product Ag(6)I(+) also promotes C-I and C-OH bond activation.DFT calculations were carried out to gain insights into the reaction of Ag(5)(+) with ICH(2)CH(2)OH by calculating possible structures and their energies for the following species: (i) initial adducts of Ag(5)(+) and ICH(2)CH(2)OH, (ii) the subsequent Ag(5)HIO(+) product, (iii) CID products of Ag(5)HIO(+). Potential adducts were probed by allowing ICH(2)CH(2)OH to bind in different ways (monodentate through I, monodentate through OH, bidentate) at different sites for two isomers of Ag(5)(+): the global minimum "bowtie" structure, 1, and the higher energy trigonal bipyramidal isomer, 2. The following structural trends emerged: (i) ICH(2)CH(2)OH binds in a monodentate fashion to the silver core with little distortion, (ii) ICH(2)CH(2)OH binds to 1 in a bidentate fashion with some distortion to the silver core, and (iii) ICH(2)CH(2)OH binds to 2 and results in a significant distortion or rearrangement of the silver core. The DFT calculated minimum energy structure of Ag(5)HIO(+) consists of an OH ligated to the face of a distorted trigonal bipyramid with I located at a vertex, while those for both Ag(4)X(+) (X = OH, I) involve AgX bound to a Ag(3)(+) core. The calculations also predict the following: (i) the ion-molecule reaction of Ag(5)(+) and ICH(2)CH(2)OH to yield Ag(5)HIO(+) is exothermic by 34.3 kcal mol(-1), consistent with the fact that this reaction readily occurs under the near thermal experimental conditions, (ii) the lowest energy products for fragmentation of Ag(5)HIO(+) arise from loss of AgI, consistent with this being the major pathway in the CID experiments.     

Gas-phase kinetics and mechanism of the reactions of protonated hydrazine with carbonyl compounds. Gas-phase hydrazone formation: kinetics and mechanism

The gas-phase reactions of protonated hydrazine (hydrazinium) with organic compounds were studied in a selected ion flow tube-chemical ionization mass spectrometer (SIFT-CIMS) at 0.5 Torr pressure and approximately 300 K and with hybrid density functional calculations. Carbonyl and other polar organic compounds react to form adducts, e.g., N(2)H(5)(+)(CH(3)CH(2)CHO). In the presence of neutral hydrazine, aldehyde adducts react further to form protonated hydrazones, e.g., CH(3)CH(2)CH[double bond]HNNH(2)(+) from propanal. Using deuterated hydrazine (N(2)D(4)) and butanal, we demonstrate that the gas-phase ion chemistry of hydrazinium and carbonyls operates by the same mechanisms postulated for the reactions in solution. Calculations provide insight into specific steps and transition states in the reaction mechanism and aid in understanding the likely reaction process upon chemical or translational activation. For most carbonyls, rate coefficients for adduct formation approach the predicted maximum collisional rate coefficients, k approximately 10(-9) cm(3) molecule(-1) s(-1). Formaldehyde is an exception (k approximately 2 x 10(-11) cm(3) molecule(-1) s(-1)) due to the shorter lifetime of its collision complex. Following adduct formation, the process of hydrazone formation may be rate limiting at thermal energies. The combination of fast reaction rates and unique chemistry shows that protonated hydrazine can serve as a useful chemical-ionization reagent for quantifying atmospheric carbonyl compounds via CIMS. Mechanistic studies provide information that will aid in optimizing reaction conditions for this application.     

Unusual atmospheric pressure chemical ionization conditions for detection of organic peroxides

Organic peroxides such as the cumene hydroperoxide I (M(r) = 152 u), the di-tert-butyl peroxide II (M(r) = 146 u) and the tert-butyl peroxybenzoate III (M(r) = 194 u) were analyzed by atmospheric pressure chemical ionization mass spectrometry using a water-methanol mixture as solvent with a low flow-rate of mobile phase and unusual conditions of the source temperature (< or =50 degrees C) and probe temperature (70-200 degrees C). The mass spectra of these compounds show the formation of (i) an [M + H](+) ion (m/z 153) for the hydroperoxide I, (ii) a stable adduct [M + CH(3)OH(2)](+) ion (m/z 179) for the dialkyl peroxide II and (iii) several protonated adduct species such as protonated molecules (m/z 195) and different protonated adduct ions (m/z 227, 389 and 421) for the peroxyester III. Tandem mass spectrometric experiments, exact mass measurements and theoretical calculations were performed for characterize these gas-phase ionic species. Using the double-well energy potential model illustrating a gas-phase bimolecular reaction, three important factors are taken into account to propose a qualitative interpretation of peroxide behavior toward the CH(3)OH(2) (+), i.e. thermochemical parameters (DeltaHdegrees(reaction)) and two kinetic factors such as the capture constant of the initial stable ion-dipole and the magnitude of the rate constant of proton transfer reaction into the loose proton bond cluster.     

Direct ab initio molecular dynamics study on a microsolvated SN2 reaction of OH-(H2O) with CH3Cl

Reaction dynamics for a microsolvated SN2 reaction OH-(H2O)+CH3Cl have been investigated by means of the direct ab initio molecular dynamics method. The relative center-of-mass collision energies were chosen as 10, 15, and 25 kcal/mol. Three reaction channels were found as products. These are (1) a channel leading to complete dissociation (the products are CH3OH+Cl- +H2O: denoted by channel I), (2) a solvation channel (the products are Cl-(H2O)+CH3OH: channel II), and (3) a complex formation channel (the products are CH3OH...H2O+Cl-: channel III). The branching ratios for the three channels were drastically changed as a function of center-of-mass collision energy. The ratio of complete dissociation channel (channel I) increased with increasing collision energy, whereas that of channel III decreased. The solvation channel (channel II) was minor at all collision energies. The selectivity of the reaction channels and the mechanism are discussed on the basis of the theoretical results.     

Multichannel RRKM-TST and CVT rate constant calculations for reactions of CH2OH or CH3O with HO2

The kinetics and mechanism of the gas-phase reactions between hydroxy methyl radical (CH(2)OH) or methoxy radical (CH(3)O) with hydroproxy radical (HO(2)) have been theoretically investigated on their lowest singlet and triplet surfaces. Our investigations indicate the presence of one deep potential well on the singlet surface of each of these systems that play crucial roles on their kinetics. We have shown that the major products of CH(2)OH + HO(2) system are HCOOH, H(2)O, H(2)O(2), and CH(2)O and for CH(3)O + HO(2) system are CH(3)OH and O(2). Multichannel RRKM-TST calculations have been carried out to calculate the individual rate constants for those channels proceed through the formation of activated adducts on the singlet surfaces. The rate constants for direct hydrogen abstraction reactions on the singlet and triplet surfaces were calculated by means of direct-dynamics canonical variational transition-state theory with small curvature approximation for the tunneling.     

Computational study of the oxidation and decomposition of dibenzofuran under atmospheric conditions

The atmospheric degradation of dibenzofuran (DF) initiated by OH addition has been studied by using density functional theory (B3LYP method). Site C1 in DF is predicted to be the favored site for OH addition, with a branching ratio of 0.61 to produce a DF-OH(1) adduct. The calculated reaction rate constant for OH addition to DF has been used to predict the atmospheric lifetime of DF to be 0.45 day. Three different modes of attack of O2 ((3)Sigma(g)) on DF-OH(1) have been examined. Abstraction of hydrogen gem to OH in DF-OH(1) by O2 ((3)Sigma(g)) (producing 1-dibenzofuranol I) and dioxygen addition in the three radical sites in cis and trans orientation (relative to the ispo-added OH) of the pi-delocalized electron system of DF-OH(1) are feasible under atmospheric conditions. The free energy of activation (at 298.15 K) for the formation of 1-dibenzofuranol is 15.1 kcal/mol with a free energy change of -36.3 kcal/mol, while the formation of DF-OH(1)-O2 adducts are endergonic by 9.2-21.8 kcal/mol with a 16.3-23.6 kcal/mol free energy of activation. On the basis of the calculated reaction rate constants, the formation of 1-dibenzofuranol is more important than the formation of DF-OH-O2 adducts. The results presented here are a first attempt to gain a better understanding of the atmospheric oxidation of dioxin-like compounds on a precise molecular basis.     

Mechanism of OH radical reactions with HCN and CH3CN: OH regeneration in the presence of O2

A theoretical study on the mechanism of the OH reactions with HCN and CH(3)CN, in the presence of O2, is presented. Optimum geometries and frequencies have been computed at BHandHLYP/6-311++G(2d,2p) level of theory for all stationary points. Energy values have been improved by single-point calculations at the above geometries using CCSD(T)/6-311++G(2d,2p). The initial attack of OH to HCN was found to lead only to the formation of the HC(OH)N adduct, while for CH(3)CN similar proportions of CH(2)CN and CH(3)C(OH)N are expected. A four-step mechanism has been proposed to explain the OH regeneration, experimentally observed for OH + CH(3)CN reaction, when carried out in the presence of O2. The mechanism steps are as follows: (1) OH addition to the C atom in the CN group, (2) O2 addition to the N atom, (3) an intramolecular H migration from OH to OO, and (4) OH elimination. This mechanism is in line with the one independently proposed by Wine et al. for HCN. The results obtained here suggest that for the OH + HCN reaction, the OH regeneration might occur even in larger extension than for OH + CH(3)CN reaction. The agreement between the calculated data and the available experimental evidence on the studied reactions seems to validate the mechanism proposed here.     

Water-catalyzed hydrolysis of the radical cation of ketene in the gas phase: theory and experiment

Both theoretical and experimental investigations are reported for the gas-phase hydrolysis of the radical cation of ketene, H(2)CCO(*+). Density functional theory (DFT) with the B3LYP/6-311++G(d,p) method indicates that a second water molecule is required as a catalyst for the addition of water across the C=O bond in H(2)CCO(*+) by eliminating the activation barrier for the conversion of [H(2)CCO.H(2)O](*+) to [H(2)CC(OH)(2)](*+). Theory further indicates that [H(2)CC(OH)(2).H(2)O](*+) may recombine with electrons to produce neutral acetic acid. Experimental results of flow-reactor tandem mass spectrometer experiments in which CH(2)CO(*+) ions were produced either directly from ketene by electron transfer or by the chemical reaction of CH(2)(*+) with CO are consistent with formation of an (C(2),H(4),O(2))(*+) ion in a reaction second-order in H(2)O. Furthermore, comparative multi-CID experiments indicate that this ion is likely to be the enolic CH(2)C(OH)(2)(*+) cation. The results suggest a possible mechanism for the formation of acetic acid from ketene and water on icy surfaces in hot cores and interstellar clouds.     

Endo-exo and facial stereoselectivity in the Diels-Alder reactions of 3-substituted cyclopropenes with butadiene

A computational examination of the four modes of addition in the Diels-Alder reactions of 3-substituted cyclopropene derivatives (substituents: BH(2), CH(3), SiH(3), NH(2), PH(2), OH, SH, F, and Cl) with butadiene have been carried out at the B3LYP/6-31++G(d)//HF/6-31++G(d) level. The degree of stabilization of these derivatives at the ground state correlates with the electronegativity of the substituent. This attenuation of reactivity and differences in steric interactions are the only factors needed to explain both the high facial selectivity and the differences in the endo-exo selectivity seen in these reactions. Furthermore, evidence is presented that indicates that stabilization by an interaction involving the syn C-3 hydrogen of cyclopropene and butadiene is small or irrelevant in controlling the endo-exo selectivity of the Diels-Alder reaction.     

Troposelective substitutions in microsolvated systems.

The mechanism and the stereochemistry of the intracomplex "solvolysis" of the proton-bound complexes I(X)() between CH(3)(18)OH and (R)-(+)-1-aryl-ethanol (1(R)()(X)(); aryl = phenyl (X = H); pentafluorophenyl (X = F)) have been investigated in the gas phase in the 25-100 degrees C temperature range. The results point to intracomplex "solvolysis" as proceeding through the intermediacy of the relevant benzyl cation III(X)() (a pure S(N)1 mechanism). "Solvolysis" of I(H)() leads to complete racemization at T > 50 degrees C, whereas at T < 50 degrees C the reaction displays a preferential retention of configuration. Predominant retention of configuration is also observed in the intracomplex "solvolysis" of I(F)(). This picture is rationalized in terms of different intracomplex interactions between the benzylic ion III(X)() and the nucleophile/leaving group pair, which govern the timing of their reorientation within the electrostatic complex. The obtained gas-phase picture is discussed in the light of related gas-phase and solution data. It is concluded that the solvolytic reactions are mostly governed by the lifetime and the dynamics of the species involved and, if occurring in solution, by the nature of the solvent cage. Their rigid subdivision into the S(N)1 and S(N)2 mechanistic categories appears inadequate, and the use of their stereochemistry as a mechanistic probe can be highly misleading.     

Theoretical study on the gas-phase reaction mechanism between palladium monoxide and methane

The gas-phase reaction mechanism between palladium monoxide and methane has been theoretically investigated on the singlet and triplet state potential energy surfaces (PESs) at the CCSD(T)/AVTZ//B3LYP/6-311+G(2d, 2p), SDD level. The major reaction channel leads to the products PdCH(2) + H(2)O, whereas the minor channel results in the products Pd + CH(3)OH, CH(2)OPd + H(2), and PdOH + CH(3). The minimum energy reaction pathway for the formation of main products (PdCH(2) + H(2)O), involving one spin inversion, prefers to start at the triplet state PES and afterward proceed along the singlet state PES, where both CH(3)PdOH and CH(3)Pd(O)H are the critical intermediates. Furthermore, the rate-determining step is RS-CH(3) PdOH → RS-2-TS1cb → RS-CH(2)Pd(H)OH with the rate constant of k = 1.48 × 10(12) exp(-93,930/RT). For the first C-H bond cleavage, both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) affect the activation energy ΔE(≠), with ΔE(≠)(int) in favor of the direct oxidative insertion. On the other hand, in the PdCH(2) + H(2) O reaction, the main products are Pd + CH(3)OH, and CH(3)PdOH is the energetically preferred intermediate. In the CH(2)OPd + H(2) reaction, the main products are Pd + CH(3)OH with the energetically preferred intermediate H(2)PdOCH(2). In the Pd + CH(3)OH reaction, the main products are CH(2)OPd + H(2), and H(2)PdOCH(2) is the energetically predominant intermediate. The intermediates, PdCH(2), H(2) PdCO, and t-HPdCHO are energetically preferred in the PdC + H(2), PdCO + H(2), and H(2)Pd + CO reactions, respectively. Besides, PdO toward methane activation exhibits higher reaction efficiency than the atom Pd and its first-row congener NiO.     

Reactions of gaseous acylium ions with 1,3-dienes: further evidence for polar [4 + 2+] Diels-Alder cycloaddition

A novel reaction of acylium and thioacylium ions, polar [4 + 2(+)] Diels-Alder cycloaddition with 1,3-dienes and O-heterodienes, has been systematically investigated in the gas phase (Eberlin MN, Cooks RG. J. Am. Chem. Soc. 1993; 115: 9226). This polar cycloaddition, yet without precedent in solution, likely forms cyclic 2,5-dihydropyrylium ions. Here we report the reactions of gaseous acylium ions [(CH(3))(2)N-C(+)=O, Ph-C(+)=O, (CH(3))(2)N-C(+)=S, CH(3)-C(+)=O, CH(3)CH(2)-C(+)=O, and CH(2)=CH-C(+)=O] with several 1-oxy-substituted 1,3-dienes of the general formula RO-CH=CH-C(R(1))=CH(2), which were performed to collect further evidence for cycloaddition. In reactions with 1-methoxy and 1-(trimethylsilyloxy)-1,3-butadiene, adducts are formed to a great extent, but upon collision activation they mainly undergo structurally unspecific retro-addition dissociation. In reactions with Danishefsky's diene (trans-1-methoxy-3-(trimethylsilyloxy)-1,3-butadiene), adducts are also formed to great extents, but retro-addition is no longer their major dissociation; the ions dissociate instead mainly to a common fragment, the methoxyacryl cation of m/z 85. This fragment ion is most likely formed with the intermediacy of the acyclic adduct, which isomerizes prior to dissociation by a trimethylsilyl cation shift. Theoretical calculations predict that meta cycloadducts bearing 1-methoxy and 1-trimethylsilyloxy substituents are unstable, undergoing barrierless ring opening induced by the charge-stabilizing effect of the 1-oxy substituents. In contrast, for the reactions with 1-acetoxy-1,3-butadiene, both the experimental results and theoretical calculations point to the formation of intrinsically stable cycloadducts, but the intact cycloadducts are either not observed or observed in low abundances. Both the isomeric ortho and meta cycloadducts are likely formed, but the nascent ions dissociate to great extents owing to excess internal energy. The ortho cycloadducts dissociate by ketene loss; the meta cycloadducts undergo intramolecular proton transfer to the acetoxy group followed by dissociation by acetic acid loss to yield aromatic pyrylium ions. Either or both of these dissociations, ketene and/or acetic acid loss, dominate over the otherwise favored retro-Diels-Alder alternative. The pyrylium ion products therefore constitute compelling evidence for polar [4 + 2(+)] cycloaddition since their formation can only be rationalized with the intermediacy of cyclic adducts.     

Theoretical study on the gas phase reaction of acrylonitrile with a hydroxyl radical

The mechanism and kinetics of the reaction of acrylonitrile (CH(2)=CHCN) with hydroxyl (OH) has been investigated theoretically. This reaction is revealed to be one of the most significant loss processes of acrylonitrile. BHandHLYP and M05-2X methods are employed to obtain initial geometries. The reaction mechanism conforms that OH addition to C[double bond, length as m-dash]C double bond or C atom of -CN group to form the chemically activated adducts, 1-IM1(HOCH(2)=CHCN), 2-IM1(CH(2)=HOCHCN), and 3-IM1(CH(2)=CHCOHN) via low barriers, and direct hydrogen abstraction paths may also occur. Temperature- and pressure-dependent rate constants have been evaluated using the Rice-Ramsperger-Kassel-Marcus theory. The calculated rate constants are in good agreement with the experimental data. At atmospheric pressure with N(2) as bath gas, 1-IM1(OHCH(2)=CHCN) formed by collisional stabilization is the major product in the temperature range of 200-1200 K. The production of CH(2)CCN and CHCHCN via hydrogen abstractions becomes dominant at high temperatures (1200-3000 K).