Generation of AuPd22/Au2Pd21 analogues of the high-nuclearity Pd23(CO)20(PEt3)10 cluster containing 19-atom centered hexacapped-cuboctahedral (nu 2-octahedral) metal fragment: structural-to-synthesis approach concerning formation of Au2Pd21(CO)20(PEt3)10

Reactions of Pd(PEt(3))(2)Cl(2) and Au(PPh(3))Cl in DMF with NaOH under CO atmosphere gave rise to the unique capped three-shell homopalladium Pd(145)(CO)(x)(PEt(3))(30)(x approximately 60) and two neutral Au-Pd clusters: Au(2)Pd(21)(CO)(20)(PEt(3))(10) (1) and Au(2)Pd(41)(CO)(27)(PEt(3))(15)(following article). Similar reactions with Pd(PMe(3))(2)Cl(2) being used in place of Pd(PEt(3))(2)Cl(2) afforded Au(2)Pd(21)(CO)(20)(PMe(3))(10) (2), the trimethylphosphine analogue of, and the electronically equivalent [AuPd(22)(CO)(20)(PPh(3))(4)(PMe(3))(6)](-) monoanion (3) as the [PPh(4)](+) salt. Each of these three air-sensitive 23-atom heterometallic Au-Pd clusters was obtained in low yields (7-25%); however, their geometrical similarities with the known cuboctahedral-based homopalladium Pd(23)(CO)(20)(PEt(3))(10) (4), recently obtained in good yields from Pd(10)(CO)(12)(PEt(3))(6), suggested an alternative preparative route for obtaining. This "structure-to-synthesis" approach afforded 1 in 60-70% yields from reactions of Pd(10)(CO)(12)(PEt(3))(6) and Au(PPh(3))Cl in DMF with NaOH under N(2) atmosphere. Both the compositions and atomic arrangements for 1, 2 and 3 were unambiguously established from low-temperature single-crystal CCD X-ray crystallographic determinations in accordance with their nearly identical IR carbonyl frequencies. Cluster 1 was also characterized by (31)P[(1)H] NMR, cyclic voltammetry (CV) and elemental analysis. The virtually identical Au(2)Pd(21) core-architectures of 1 and 2 closely resemble that of 4, which consists of a centered hexa(square capped)-cuboctahedral Pd(19) fragment of pseudo-O(h) symmetry that alternatively may be viewed as a centered Pd(19)nu(2)-octahedron (where nu(n) designates (n + 1) equally spaced atoms along each edge). [AuPd(22)(CO)(20)(PPh(3))(4)(PMe(3))(6)](-) (3) in the crystalline state ([PPh(4)](+) salt) consists of two crystallographically independent monoanions 3A and 3B; a superposition analysis ascertained that their geometries are essentially equivalent. A CV indicates that reversibly undergoes two one-electron reductions and two one-electron oxidations; these reversible redox processes form the basis for an integrated structural/electronic picture that is compatible with the existence of the electronically-equivalent 1-3 along with the electronically-nonequivalent 4 (with two fewer CVEs) and other closely related species.     

CO-induced formation of an interpenetrating bicuboctahedral Au2Pd18 kernel in nanosized Au2Pd28(CO)26(PEt3)10: formal replacement of an interior (μ12-Pd)2 fragment in the corresponding known isostructural homopalladium Pd30(CO)26(PEt3)10 with nonisovalent (μ12-Au)2 and resulting experimental/theoretical implications

Initially isolated from Pd(10)(CO)(12)(PEt(3))(6) (5) and Au(SMe(2))Cl precursors in a two-step carbon monoxide (CO)-involved procedure, the nanosized interpenetrating bicuboctahedral gold (Au)-palladium (Pd) Au(2)Pd(28)(CO)(26)(PEt(3))(10) (1) was then directly obtained in 25-30% yield from the CO-induced reaction of the CO-stable Au-centered cuboctahedral Au(2)Pd(21)(CO)(20)(PEt(3))(10) (3) with the structurally analogous CO-unstable Pd(23)(CO)(20)(PEt(3))(10) (4). Our hypothesis that this latter synthesis is initiated by the reaction of 3 with coordinatively unsaturated homopalladium species resulting from CO-induced fragmentation of 4 was subsequently substantiated by the alternatively designed synthesis of 1 (～25% yield) from the CO-induced reaction of 3 with the structurally dissimilar CO-unstable Pd(38)(CO)(28)(PEt(3))(12) (6). The composition of 1, unambiguously established from a 100 K CCD X-ray diffractometry study, is in accordance with single-crystal X-ray Au-Pd field-emission microanalysis. The pseudo-C(2h) 30-atom Au(2)Pd(28) geometry of 1 may be formally derived via substitution of the interior (μ(12)-Pd)(2) moiety in the interpenetrating bicuboctahedral Pd(20) kernel of the known isostructural Pd(30)(CO)(26)(PEt(3))(10) (2) with the corresponding interior (μ(12)-Au)(2) moiety, in which the otherwise entire metal-core geometry and CO/PR(3)-ligated environment are essentially not altered. Of major significance is that this interior nonisovalent Pd-by-Au replacement in 2 produces CO-stable 1, whereas nanosized CO/PR(3)-ligated homopalladium Pd(n) clusters with n > 10 are generally unstable under CO. Because the two adjacent encapsulated Au atoms of 2.811(1) ? separation are not present on the metal surface, isolation of 1 under CO is ascribed to an electronic property. The virtually ideal geometrical site-occupancy fit between 1 and 2 provides definite crystallographic evidence for extensive delocalization in 1 of the two valence Au 6s electrons over the entire cluster (instead of a "localized" covalent Au-Au electron-pair interaction). Gradient-corrected (pseudo-scalar-relativistic) density functional theory (DFT) calculations were performed on the isostructural Au(2)Pd(28)(CO)(26)(PH(3))(10) (1-H) and Pd(30)(CO)(26)(PH(3))(10) (2-H) model clusters along with hypothetical [Au(2)Pd(28)(1-H)](2+) and [Pd(30)(2-H)](2-) analogues (with phosphine ethyl substituents replaced by hydrogen ones). Natural population analysis of these four model clusters revealed similar highly positively charged metal surfaces of 28 Pd atoms relative to the two negatively charged interior metal atoms, which reflect a partially oxidized metal surface due to dominant CO back-bonding. The surprising observation that each less electronegative interior Pd atom in 2-H is more negatively charged by 0.30e than each interior Au atom in 1-H points to a more cationic Au in 1 than interior Pd in 2; this unexpected (opposite) charge difference is consistent with delocalization of each Au 6s valence electron toward a Au(+) configuration. This premise is in agreement with the calculated Wiberg bond index (WBI) value of 0.055 for the Au-Au bond order in 1-H versus the WBI single-bond value of 1.01 obtained from analogous DFT calculations for the bare, neutral Au(2) dimer, which has a much shorter spectroscopically determined gas-phase distance of 2.472 ? (that corresponds to a "localized" electron-pair interaction). Isolation of 1 under CO is of prime importance in nanoscience/nanotechnology in establishing relative stabilizations toward CO in well-defined CO/PEt(3)-ligated nonisovalent Pd(2)-by-Au(2)-substituted Au(2)Pd(n-2) clusters [namely, n = 30 (1) and 23 (3)]. These important stereochemical implications have a direct relevance to the recent report of the higher tolerance to CO poisoning of highly active Au-Pd nanoparticle catalysts used for the complete conversion of formic acid into high-purity hydrogen (and CO(2)) for chemical hydrogen storage.     

Synthesis and structural analysis of the first nanosized platinum-gold carbonyl/phosphine cluster, Pt13[Au2(PPh3)2]2(CO)10(PPh3)4, containing a Pt-centered [Ph3PAu-AuPPh3]-capped icosahedral Pt12 cage

The preparation and molecular structure of the initial nanosized platinum-gold carbonyl cluster, Pt(13)[Au(2)(PPh(3))(2)](2)(CO)(10)(PPh(3))(4) (1), are described. A comparative analysis reveals its pseudo-D(2)(h) geometry, consisting of a centered Pt(13) icosahedron encapsulated by two centrosymmetrically related bidentate [Ph(3)PAu-AuPPh(3)]-capped ligands along with 4 PR(3) and 10 CO ligands, to be remarkably similar to that of the previously reported Pt(17)(mu(2)-CO)(4)(CO)(8)(PEt(3))(8) (2). Reformulation of 2 as Pt(13)[(PtPEt(3))(2)(mu(2)-CO)](2)(CO)(10)(PEt(3))(4) emphasizes the steric/electronic resemblance of the bulky-sized bidentate [Ph(3)PAu-AuPPh(3)] and [(PtPEt(3))(2)(mu(2)-CO)] capping ligands in 1 and 2, respectively, as well as their identical electron counts of 162 cluster valence electrons for a centered Pt(13) icosahedron. We hypothesize that analogous steric effects of their ligand polyhedra in 1 and 2 play a crucial role along with electronic effects in the formation and stabilization of these two nanosized clusters that contain an otherwise unknown centered icosahedron of platinum atoms.     

Oxidative cleavage of tetraaryltetraphosphane-1,4-diides by nickel(II) and palladium(II): formation of unusual Ni(0) and Pd(0) diaryldiphosphene complexes

[Na(2)(thf)(4)(P(4)Mes(4))] (1) (Mes = 2,4,6-Me(3)C(6)H(2)) reacts with one equivalent of [NiCl(2)(PEt(3))(2)], [NiCl(2)(PMe(2)Ph)(2)], [PdCl(2)(PBu(n)(3))(2)] or [PdCl(2)(PMe(2)Ph)(2)] to give the corresponding nickel(0) and palladium(0) dimesityldiphosphene complexes [Ni(eta(2)-P(2)Mes(2))(PEt(3))(2)] (2), [Ni(eta(2)-P(2)Mes(2))(PMe(2)Ph)(2)] (3), [Pd(eta(2)-P(2)Mes(2))(PBu(n)(3))(2)] (4) and [Pd(eta(2)-P(2)Mes(2))(PMe(2)Ph)(2)] (5), respectively, via a redox reaction. The molecular structures of the diphosphene complexes 2-5 are described.     

Nanosized (mu12-Pt)Pd164-xPtx(CO)72(PPh3)20 (x approximately 7) containing Pt-centered four-shell 165-atom Pd-Pt core with unprecedented intershell bridging carbonyl ligands: comparative analysis of icosahedral shell-growth patterns with geometrically related Pd145(CO)x(PEt3)30 (x approximately 60) containing capped three-shell Pd145 core

Presented herein are the preparation and crystallographic/microanalytical/magnetic/spectroscopic characterization of the Pt-centered four-shell 165-atom Pd-Pt cluster, (mu(12)-Pt)Pd(164-x)Pt(x)(CO)(72)(PPh(3))(20) (x approximately 7), 1, that replaces the geometrically related capped three-shell icosahedral Pd(145) cluster, Pd(145)(CO)(x)(PEt(3))(30) (x approximately 60), 2, as the largest crystallographically determined discrete transition metal cluster with direct metal-metal bonding. A detailed comparison of their shell-growth patterns gives rise to important stereochemical implications concerning completely unexpected structural dissimilarities as well as similarities and provides new insight concerning possible synthetic approaches for generation of multi-shell metal clusters. 1 was reproducibly prepared in small yields (<10%) from the reaction of Pd(10)(CO)(12)(PPh(3))(6) with Pt(CO)(2)(PPh(3))(2). Its 165-atom metal-core geometry and 20 PPh(3) and 72 CO ligands were established from a low-temperature (100 K) CCD X-ray diffraction study. The well-determined crystal structure is attributed largely to 1 possessing cubic T(h) (2/m3) site symmetry, which is the highest crystallographic subgroup of the noncrystallographic pseudo-icosahedral I(h) (2/m35) symmetry. The "full" four-shell Pd-Pt anatomy of 1 consists of: (a) shell 1 with the centered (mu(12)-Pt) atom encapsulated by the 12-atom icosahedral Pt(x)Pd(12-x) cage, x = 1.2(3); (b) shell 2 with the 42-atom nu(2) icosahedral Pt(x)Pd(42-x) cage, x = 3.5(5); (c) shell 3 with the anti-Mackay 60-atom semi-regular rhombicosidodecahedral Pt(x)Pd(60-x) cage, x = 2.2(6); (d) shell 4 with the 50-atom nu(2) pentagonal dodecahedral Pd(50) cage. The total number of crystallographically estimated Pt atoms, 8 +/- 3, which was obtained from least-squares (Pt(x)/Pd(1-x))-occupancy analysis of the X-ray data that conclusively revealed the central atom to be pure Pt (occupancy factor, x = 1.00(3)), is fortuitously in agreement with that of 7.6(7) found from an X-ray Pt/Pd microanalysis (WDS spectrometer) on three crystals of 1. Our utilization of this site-occupancy (Pt(x)Pd(1-x))-analysis for shells 1-3 originated from the microanalytical results; otherwise, the presumed metal-core composition would have been (mu(12)-Pt)Pd(164). [Alternatively, the (mu(12)-Pt)M(164) core-geometry of 1 may be viewed as a pseudo-Ih Pt-centered six-shell successive nu(1) polyhedral system, each with radially equivalent vertex atoms: Pt@M(12)(icosahedron)@M(30)(icosidodecahedron)@M(12)(icosahedron)@M(60)(rhombicosidodecahedron)@M(30)(icosidodecahedron)@M(20)(pentagonal dodecahedron)]. Completely surprising structural dissimilarities between 1 and 2 are: (1) to date 1 is only reproducibly isolated as a heterometallic Pd-Pt cluster with a central Pt instead of Pd atom; (2) the 50 atoms comprising the outer fourth nu(2) pentagonal dodecahedral shell in 1 are less than the 60 atoms of the inner third shell in 1, in contradistinction to shell-by-shell growth processes in all other known shell-based structures; (3) the 10 fewer PR3 ligands in 1 necessitate larger bulky PPh(3) ligands to protect the Pd-Pt core-geometry; (4) the 72 CO ligands consist of six bridging COs within each of the 12 pentagons in shell 4 that are coordinated to intershell metal atoms. SQUID magnetometry measurements showed a single-crystal sample of 1 to be diamagnetic over the entire temperature range of 10-300 K.     

Cluster carbonyls of the [Re6(mu3-Se)8]2+ core

The first [Re(6)(mu(3)-Se)(8)](2+) core-containing cluster carbonyls, [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CO)][SbF(6)](2) and trans-[Re(6)(mu(3)-Se)(8)(PEt(3))4(CO)(2)][SbF(6)](2), were produced by reacting [Re(6)(mu(3)-Se)(8)(PEt(3))(5)I]I and trans-[Re(6)(mu(3)-Se)8(PEt(3))(4)I2], respectively, with AgSbF(6) in CO-saturated dichloromethane solutions. Spectroscopic and crystallographic studies suggest significant cluster-to-CO back-donation in these novel cluster derivatives and interesting electronic structures. Thermal and photolytic studies of the mono-carbonyl complex revealed its interesting and synthetically useful reactivity in producing new cluster derivatives.     

Cluster carbonyls of the [Re(6)(mu(3)-Se)(8)](2+) core: synthesis, structural characterization, and computational analysis

The reactions of the previously reported cluster complexes [Re(6)(mu(3)-Se)(8)(PEt(3))(5)I]I, trans-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)I(2)], and cis-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)I(2)] with the [Re(6)(mu(3)-Se)(8)](2+) core with CO in the presence of AgSbF(6) afforded the corresponding cluster carbonyls [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(CO)][SbF(6)](2) (), trans-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)(CO)(2)][SbF(6)](2) (), and cis-[Re(6)(mu(3)-Se)(8)(PEt(3))(4)(CO)(2)][SbF(6)](2) (). Infrared spectroscopy indicated weakening of the bond in CO, suggesting the existence of backbonding between the cluster core and the CO ligand(s). Electrochemical studies focusing on the reversible, one-electron oxidation of the cluster core revealed a large increase in the oxidation potential upon going from the acetonitrile derivatives to their carbonyl analogs, consistent with the depleted electron density of the cluster core upon CO ligation. Disparities between the IR spectra and oxidation potential between and indicate that electronic differences exist between sites trans and cis to the location of a ligand of interest. The active role played by the Se atoms in influencing the cluster-to-CO bonding interactions is suggested through this result and density functional (DF) computational analysis. The computations indicate that molecular orbitals near the HOMO account for backbonding interactions with a high percentage of participation of Se orbitals.     

Disulfides of manganese carbonyl. Synthesis of Mn(2)(CO)(7)(mu-S2) and its reactions with tertiary phosphines and arsines

The reaction of Mn(2)(CO)(9)(NCMe) with thiirane yielded the sulfidomanganese carbonyl compounds Mn(2)(CO)(7)(mu-S(2)), 2, Mn(4)(CO)(15)(mu(3)-S(2))(mu(4)-S(2)), 3, and Mn(4)(CO)(14)(NCMe)(mu(3)-S(2))(mu(4)-S(2)), 4, by transfer of sulfur from the thiirane to the manganese complex. Compound 3 was obtained in better yield from the reaction of 2 with CO, and compound 4 is obtained from the reaction of 2 with NCMe. The reaction of 2 with PMe(2)Ph yielded the tetramanganese disulfide Mn(4)(CO)(15)(PMe(2)Ph)(2)(mu(3)-S)(2), 5, and S=PMe(2)Ph. The reaction of 5 with PMe(2)Ph yielded Mn(4)(CO)(14)(PMe(2)Ph)(3)(mu(3)-S)(2), 6, by ligand substitution. The reaction of 2 with AsMe(2)Ph yielded the new complexes Mn(4)(CO)(14)(AsMe(2)Ph)(2)(mu(3)-S(2))(2), 7, Mn(4)(CO)(14)(AsMe(2)Ph)(mu(3)-S(2))(mu(4)-S(2)), 8, Mn(6)(CO)(20)(AsMe(2)Ph)(2)(mu(4)-S(2))(3), 9, and Mn(2)(CO)(6)(AsMe(2)Ph)(mu-S(2)), 10. Reaction of 2 with AsPh(3) yielded the monosubstitution derivative Mn(2)(CO)(6)(AsPh(3))(mu-S(2)), 11. Reaction of 7 with PMe(2)Ph yielded Mn(4)(CO)(15)(AsMe(2)Ph)(2)(mu(3)-S)(2), 12. The phosphine analogue of 7, Mn(4)(CO)(14)(PMe(2)Ph)(2)(mu(3)-S(2))(2), 13, was prepared from the reaction of Mn(2)(CO)(9)(PMe(2)Ph) with Me(3)NO and thiirane. Compounds 2-9 and 11-13 were characterized by single-crystal X-ray diffraction. Compound 2 contains a disulfido ligand that bridges two Mn(CO)(3) groups that are joined by a Mn-Mn single bond, 2.6745(5) A in length. A carbonyl ligand bridges the Mn-Mn bond. Compounds 3 and 4 contain four manganese atoms with one triply bridging and one quadruply bridging disulfido ligand. Compounds 5 and 6 contain four manganese atoms with two triply bridging sulfido ligands. Compound 9 contains three quadruply bridging disulfido ligands imbedded in a cluster of six manganese atoms.     

Nanosized Pd37(CO)28{P(p-Tolyl)3}12 containing geometrically unprecedented central 23-atom interpenetrating tri-icosahedral palladium kernel of double icosahedral units: its postulated metal-core evolution and resulting stereochemical implications

Pd37(CO)28{P(p-Tolyl)3}12 (1) was obtained in approximately 50% yield by the short-time thermolysis of Pd10(CO)12{P(p-Tolyl)3}6 in THF solution followed by crystallization via layering with hexane under N2. The low-temperature (100 K) CCD X-ray diffraction study of 1 revealed an unusual non-spheroidal Pd37-atom polyhedron, which may be readily envisioned to originate via the initial formation of a heretofore non-isolated central Pd23 kernel composed of three interpenetrating trigonal-planar double icosahedra (DI) that are oriented along the three bonding edges of its interior Pd3 triangle. This central Pd23 kernel is augmented by face condensations with two additional phosphorus-free and 12 tri(p-C6H4Me)phosphine-ligated Pd atoms, which lower the pseudo-symmetry of the resulting 37-atom metal core from D(3h) to C2. The 12 P atoms and 28 bridging CO connectivities preserve the pseudo-C2 symmetry. The central Pd23 kernel in 1 provides the only crystallographic example of the 23-atom member of the double icosahedral family of "twinned" interpenetrating icosahedra (II), which includes the 19-atom two II (1 DI), the 23-atom three II (3 DI), the 26-atom four II (6 DI), and the 29-atom five II (9 DI). The n-atoms of these DI models coincide exactly with prominent atom-peak maxima of 19, 23, 26, and 29, respectively, in the mass spectrum of charged argon clusters formed in a low-temperature free-jet expansion. The only previous crystallographically proven 26- and 29-atom DI members are the central pseudo-T(d) tetrahedral Pd26 kernel (4 II, 6 DI) in the PMe3-ligated Pd29Ni3(CO)22(PMe3)13 (2) and the central pseudo-D(3h) trigonal-bipyramidal Pd29 kernel (5 II, 9 DI) in the PMe3-ligated Pd35(CO)23(PMe3)15 (3). Two highly important major stereochemical implications are noted: (1) The formation of geometrically identical idealized architectures for these three II palladium kernels with corresponding DI models constructed for the charged argon clusters provides compelling evidence that the nature of delocalized Pd-Pd bonding in these II (and presumably other nanosized) Pd clusters, in which each zerovalent Pd atom individually has a closed-subshell 4d (10) ground state, may likewise (as in argon clusters) be viewed primarily in terms of (considerably stronger) attractive dispersion interactions. (2) The existence of the 23-atom II Pd23 kernel in 1 provides an essential heretofore "missing" geometrical link as an intermediate in the same sequential growth pathway to give the 26- and 29-atom II Pd(n) kernels found in 2 and 3, respectively. Accommodation of the 12 bulky P(p-Tolyl)3 ligands around the entire 37-atom palladium core necessitates an extended metal surface that originates from the pseudo-2D trigonal-planar Pd23 kernel found in 1. The much smaller PMe3 ligands in 2 and 3 would sterically allow further sequential transformations of an initially formed 23-atom II intermediate palladium kernel into the 26-atom spheroidal II palladium kernel in 2 or further into the 29-atom semi-spheroidal II palladium kernel in 3, but with smaller total metal-atom nuclearities of 32 and 35, respectively.     

Dynamical intramolecular metal-to-metal ligand exchange of phosphine and thioether ligands in derivatives PtRu5(CO)16(mu6-C)

The complexes PtRu(5)(CO)(15)(PMe(2)Ph)(mu(6)-C) (2), PtRu(5)(CO)(14)(PMe(2)Ph)(2)(mu(6)-C) (3), PtRu(5)(CO)(15)(PMe(3))(mu(6)-C) (4), PtRu(5)(CO)(14)(PMe(3))(2)(mu(6)-C) (5), and PtRu(5)(CO)(15)(Me(2)S)(mu(6)-C) (6) were obtained from the reactions of PtRu(5)(CO)(16)(mu(6)-C) (1) with the appropriate ligand. As determined by NMR spectroscopy, all the new complexes exist in solution as a mixture of isomers. Compounds 2, 3, and 6 were characterized crystallographically. In all three compounds, the six metal atoms are arranged in an octahedral geometry, with a carbido carbon atom in the center. The PMe(2)Ph and Me(2)S ligands are coordinated to the Pt atom in 2 and 6, respectively. In 3, the two PMe(2)Ph ligands are coordinated to Ru atoms. In solution, all the new compounds undergo dynamical intramolecular isomerization by shifting the PMe(2)Ph or Me(2)S ligand back and forth between the Pt and Ru atoms. For compound 2, DeltaH++ = 15.1(3) kcal/mol, DeltaS++ = -7.7(9) cal/(mol.K), and DeltaG(298) = 17.4(6) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 4, DeltaH++ = 14.0(1) kcal/mol, DeltaS++ = -10.7(4) cal/(mol.K), and DeltaG(298) = 17.2(2) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 6, DeltaH++ = 18(1) kcal/mol, DeltaS++ = 21(5) cal/(mol.K) and DeltaG(298) = 12(2) kcal/mol. The shifts of the Me(2)S ligand in 6 are significantly more facile than the shifts for the phosphine ligand in compounds 2-5. This is attributed to a more stable ligand-bridged intermediate for the isomerizations of 6 than that for compounds 2-5. The intermediate for the isomerization of 6 involves a bridging Me(2)S ligand that can use two lone pairs of electrons for coordination to the metal atoms, whereas a tertiary phosphine ligand can use only one lone pair of electrons for bridging coordination.     

Synthesis of Ru-Pt and Ru-Pd mixed-metal imido clusters from a diruthenium imido-methylene scaffold [(Cp*Ru)2(mu2-NPh)(mu2-CH2)

The diruthenium mu2-imido mu2-methylene complex [(Cp*Ru)2(mu2-NPh)(mu2-CH2)] serves as a bifunctional scaffold for cluster synthesis, producing a mu3-imido Ru2Pt cluster [(Cp*Ru)2(mu3-NPh)(mu2-CH2)Pt(PMe3)2] on treatment with [Pt(eta2-C2H4)(PMe3)2] and a mu3-methylidyne Ru4Pd2 cluster [(Cp*Ru)2(mu2-NPh)(mu3-CH)PdCl]2 with [PdMeCl(cod)].     

Dendritic arrays of [Re6(mu3-Se)8]2+ core-containing clusters: exploratory synthesis and electrochemical studies

The reaction between the previously reported site-differentiated cluster solvate [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(MeCN)](SbF(6))(2) (1) with pyridyl-based ditopic ligands 4,4'-trimethylenedipyridine (2), 1,2-bis(4-pyridyl)ethane (3), and (E)-1,2-bis(4-pyridyl)ethene (4) afforded cluster complexes of the general formula [Re(6)(mu(3)-Se)(8)(PEt(3))(5)(L)](SbF(6))(2) (5-7), where L represents one of the pyridyl-based ligands. Reacting these cluster complex-based ligands with the fully solvated cluster complex [Re(6)(mu(3)-Se)(8)(MeCN)(6)](SbF(6))(2) (8) produced dendritic arrays of the general formula {Re(6)(mu(3)-Se)(8)[Re(6)(mu(3)-Se)(8)(PEt(3))(5)(L)](6)}(SbF(6))(14) (9-11), each featuring six circumjacent [Re(6)(mu(3)-Se)(8)(PEt(3))(5)](2+) units bridged to a [Re(6)(mu(3)-Se)(8)](2+) core cluster by the pyridyl-based ligands. Electrochemical studies using a thin-layer electrochemical cell revealed cluster-based redox events in these cluster arrays. For 9 (L = 2), one reversible oxidation event corresponding to the removal of 7 electrons was observed, indicating noninteraction or extremely weak interactions between the clusters. For 10 (L = 3), two poorly resolved oxidation waves were found. For 11 (L = 4), two reversible oxidation events, corresponding respectively to the removal of 1 and 6 electrons, were observed with the 1-electron oxidation event occurring at a potential 150 mV more positive than the 6-electron oxidation. These electrochemical studies suggest intercluster coupling in 11 via through-bond electronic delocalization, which is consistent with electronic spectroscopic studies of this same molecule.     

Structural/bonding insights from new geometrical varieties of two Pt-Au carbonyl/phosphine clusters, [Pt3(AuPPh3)5(mu2-CO)2L3]+ (L3 = (CO)2PPh3) and [(mu6-Au){Pt3(mu2-CO)3L4}2]+ (L = PMe3)

Structural/bonding considerations of two new Pt-Au clusters, [Pt3(AuPPh3)5(mu2-CO)2(CO)2PPh3]+ (1) and [(mu6-Au){Pt3(mu2-CO)3(PMe3)4}2]+ (2) isolated (as chloride salts), revealed: (i) that the heretofore unknown 20-electron Pt-centered Pt2Au5 icosahedral cage fragment (five missing vertices) of is best viewed as a 44-electron triangular Pt3 adduct of a nearly planar 39-electron [Pt3(mu2-CO)2L3]+ (L3 = (CO)2PPh3) and five one-electron donating AuPPh3 ligands; and (ii) that the geometrically distorted trimethylphosphine "full" Pt3AuPt3 sandwich of is the first example of two nucleophilic 44-electron triangular Pt3(mu2-CO)3L4 (3 : 3 : 4) units (L = PMe3) which asymmetrically encapsulate a central electrophilic Au(I).     

Structural basis for unusually long wavelength charge transfer transitions in complexes [MCl(ECH(2)CH(2)NMe(2))(PR(3))] (E = Te,Se; M = Pt,Pd): experimental results and TD-DFT calculations

A series of new complexes, the blue compounds [PdCl(TeCH(2)CH(2)NMe(2))(PR(3))] (PR(3) = PEt(3), PPr(n)(3), PBu(n)(3), PMe(2)Ph, PMePh(2), PPh(3), PTol(3)) and the red [PtCl(TeCH(2)CH(2)NMe(2))(PR(3))] (PR(3) = PMe(2)Ph, PMePh(2)), were synthesized and studied spectroscopically ((1)H and (31)P NMR, UV/vis) and by cyclic voltammetry. The structures of [PdCl(TeCH(2)CH(2)NMe(2))(PPr(n)(3))] (2b) [PdCl(TeCH(2)CH(2)NMe(2))(PMePh(2))] (2e), [PtCl(TeCH(2)CH(2)NMe(2))(PMePh(2))] (2i), and the related [PtCl(SeCH(2)CH(2)NMe(2))(PEt(3))] (3) were determined crystallographically, revealing a typical pattern of trans-positioned neutral N and P donor atoms in an approximately square planar setting. The molecules 2b, 2e, and 2i were calculated by TD-DFT methodology to understand the origin of the weak (epsilon approximately 200 M(-1) cm(-1)) long-wavelength bands at about 600 nm for Pd/Te complexes such as 2b or 2e, at ca. 460 nm for Pt/Te systems such as 2i, and at about 405 nm for Pt/Se analogues such as 3. These transitions are identified as charge transfer transitions from the selenolato or tellurolato centers to unoccupied orbitals involving mainly the phosphine coligands for the Pt(II) compounds and more delocalized MOs for the Pd(II) analogues. Calculations and electrochemical data were used to rationalize the effects of metal and chalcogen variation.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Generation, characterization, and electrochemical behavior of the palladium-hydride cluster [Pd3(dppm)3(mu3-CO)(mu3-H)]+ (dppm=Bis(diphenylphosphinomethane)

Addition of formate on the dicationic cluster [Pd(3)(dppm)(3)(mu(3)-CO)](2+) (dppm=bis(diphenylphosphinomethane) affords quantitatively the hydride cluster [Pd(3)(dppm)(3)(mu(3)-CO)(mu(3)-H)](+). This new palladium-hydride cluster has been characterised by (1)H NMR, (31)P NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry. The unambiguous identification of the capping hydride was made from (2)H NMR spectroscopy by using DCO(2) (-) as starting material. The mechanism of the hydride complex formation was investigated by UV/Vis stopped-flow methods. The kinetic data are consistent with a two-step process involving: 1) host-guest interactions between HCO(2) (-) and [Pd(3)(dppm)(3)(mu(3)-CO)](2+) and 2) a reductive elimination of CO(2). Two alternatives routes to the hydride complex were also examined : 1) hydride transfer from NaBH(4) to [Pd(3)(dppm)(3)(mu(3)-CO)](2+) and 2) electrochemical reduction of [Pd(3)(dppm)(3)(mu(3)-CO)](2+) to [Pd(3)(dppm)(3)(mu(3)-CO)](0) followed by an addition of one equivalent of H(+). Based on cyclic voltammetry, evidence for a dual mechanism (ECE and EEC; E=electrochemical (one-electron transfer), C=chemical (hydride dissociation)) for the two-electron reduction of [Pd(3)(dppm)(3)(mu(3)-CO)(mu(3)-H)](+) to [Pd(3)(dppm)(3)(mu(3)-CO)](0) is provided, corroborated by digital simulation of the experimental results. Geometry optimisations of the [Pd(3)(H(2)PCH(2)PH(2))(3)(mu(3)-CO)(mu(3)-H)](n) model clusters were performed by using DFT at the B3 LYP level. Upon one-electron reductions, the Pd--Pd distance increases from a formal single bond (n=+1), to partially bonding (n=0), to weak metal-metal interactions (n=-1), while the Pd--H bond length remains relatively the same.     

Hydrogen-bonded extended arrays of the [Re6(mu3-Se)8]2+ core-containing clusters

Site-differentiated solvated clusters of the general formula [Re(6)(mu(3)-Se)(8)(PEt(3))(n)(MeCN)(6)(-)(n)](SbF(6))(2) (n = 4, cis and trans; n = 5) undergo ligand substitution reaction with isonicotinamide to afford the corresponding amide derivatives, [Re(6)(mu(3)-Se)(8)(PEt(3))(n)(isonicotinamide)(6)(-)(n)](2+) [1 (n = 5); 2 (n = 4, trans); 3 (n = 4, cis)]. Retention of stereochemistry in each case was confirmed by (1)H and (31)P NMR. The solid-state structures of all three compounds were established crystallographically, which revealed self-complementary hydrogen-bonding interactions between adjacent cluster units. While complex 1 exists as hydrogen-bonded dimers in the solid state, compounds 2 and 3 form one-dimensional chains of clusters bridged by paired hydrogen bonds. It is the rigid stereochemistry of the cluster, combined with the classic crystal engineering motif of complementary N-H.O amide hydrogen bonding, that affords the predictable solid-state structures and dimensionality.     

Syntheses and structural analyses of variable-stoichiometric Au-Pt-Ni carbonyl/phosphine clusters, Pt3(Pt(1-x)Ni(x))(AuPPh3)2(mu2-CO)4(CO)(PPh3)3 and Pt2(Pt(2-y)Ni(y))(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2, with ligation-induced site-specific Pt/Ni substitutional disorder within butterfly-based Pt3(Pt(1-x)Ni(x))Au2 and Pt2(Pt(2-y)Ni(y))Au2 core-geometries

In ongoing attempts of directed synthesis of high-nuclearity Au-Pt carbonyl/phosphine clusters with [Ni6(CO)12]2- used as reducing agent and CO source, we have isolated and characterized two new closely related variable-stoichiometric trimetallic clusters, Pt3(Pt(1-x)Ni(x))(AuPPh3)2(mu2-CO)4(CO)(PPh3)3 (1) and Pt2(Pt(2-y)Ni(y))(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2 (2). Their M4Au2 cores may be envisioned as substitutional disordered butterfly-based M4Au2 frameworks (M = Pt/Ni) formed by connections of the two basal M(B) atoms with both (Au-Au)-linked Au(PPh3) moieties. Based upon low-temperature CCD X-ray diffraction studies of eight crystals obtained from different samples, ligation-induced site-specific Pt/Ni substitutional disorder (involving formal insertion of Ni in place of Pt) in a given crystal was found to occur only at the one OC-attached basal M(B) site in 1 or at both OC-attached basal M(B) sites in 2 corresponding to a crystal composite of the Pt3(Pt(1-x)Ni(x))Au2 core in 1 or of the Pt2(Pt(2-y)Ni(y))Au2 core in 2; the Ph3P-attached M(B) site (M(B) = Pt) in 1 and two wingtip M(w) sites (M(w) = Pt) in 1 and 2 were not substitutionally disordered. The resulting variable stoichiometry of the M4Au2 core in 1 may be viewed as a crystal composite of two superimposed individual stereoisomers, Pt4(AuPPh3)2(mu2-CO)4(CO)(PPh3)3 (1a) and Pt3Ni(AuPPh3)2(mu2-CO)4(CO)(PPh3)3 (1b), in the averaged unit cell of a given crystal. Likewise, 2 represents the crystal-averaged composite of three individual stereoisomers, Pt4(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2 (2a), Pt3Ni(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2 (2b), and Pt2Ni2(AuPPh3)2(mu2-CO)4(CO)2(PPh3)2 (2c). Formal Ni substitution for Pt at only the basal M(B) site(s) in the four crystal composites each of 1 and 2 was found to vary widely from 17% to 79% Ni in 1 and from 21% to 95% Ni in 2. Nevertheless, reasonably close Pt/Ni occupancy factors were found within each of the four pairs of composite crystals selected from samples obtained from duplicate syntheses. Both 1 and 2 may be formally derived from the electronically equivalent classic butterfly Pt4(mu2-CO)5(PPh3)4 cluster by replacement of its bridging mu2-CO ligand spanning the basal M(B)-M(B) edge with two one-electron donating (Au-Au)-linked AuPPh3 moieties along with the substitution of a terminal CO in place of one or both M(B)-attached PPh3 ligands in 1 and 2, respectively; site-specific Pt/Ni substitutional disorder occurs only at the CO-attached M(B) sites. The variable-stoichiometric 1 and 2 re also electronically equivalent and geometrically related to the crystal-ordered butterfly-based Pt4(mu2-CO)4(PR3)4(mu3-HgX)2 clusters (R3 = Ph3, MePh2; X = CF3, Br, I).     

Multiple reactions of triphenylstannane with Ru(5)(CO)(12)(C(6)H(6))(mu(5)-C) yield bimetallic clusters with unusually large numbers of tin ligands

The cluster complex Ru(5)(CO)(12)(C(6)H(6))(mu(5)-C), 1, undergoes multiple addition reactions with Ph(3)SnH to yield two new bimetallic cluster complexes: Ru(5)(CO)(8)(mu-SnPh(2))(4)(C(6)H(6))(mu(5)-C), 2, 2% yield, and Ru(5)(CO)(7)(mu-SnPh(2))(4)(SnPh(3))(C(6)H(6))(mu(5)-C)(mu-H), 3, 26% yield, containing four and five tin ligands, respectively. Both compounds consist of a square pyramidal Ru(5) cluster with an interstitial carbido ligand and bridging SnPh(2) groups located across each of the four edges of the base of the Ru(5) square pyramid. Compound 3 contains an additional SnPh(3) group terminally coordinated to one of the ruthenium atoms in the square base.     

The versatile reactivity of cyclo-(P5tBu4)- with complexes of the nickel triad

Na[cyclo-(P(5)tBu(4))] (1) reacts with [NiCl(2)(PEt(3))(2)] and [PdCl(2)(PMe(2)Ph)(2)] with elimination of tBuCl and formation of the corresponding metal(0) cyclopentaphosphene complexes [Ni{cyclo-(P(5)tBu(3))}(PEt(3))(2)] (2) and [Pd{cyclo-(P(5)tBu(3))}(PMe(2)Ph)(2)] (3). In contrast, complexes with the more labile triphenylphosphane ligand, such as [MCl(2)(PPh(3))(2)] (M=Ni, Pd), react with 1 with formation of [NiCl{cyclo-(P(5)tBu(4))}(PPh(3))] (4) and [Pd{cyclo-(P(5)tBu(4))}(2)] (5), respectively, in which the cyclo-(P(5)tBu(4)) ligand is intact. In the case of palladium, the cyclopentaphosphene complex [Pd{cyclo-(P(5)tBu(3))}(PPh(3))(2)] (6) in trace amounts is also formed. However, [Ni{cyclo-(P(5)tBu(4))}(2)] (7) is easily obtained by reaction of two equivalents of 1 and one equivalent of [NiCl(2)(bipy)] at room temperature. Complex 7 rearranges on heating in n-hexane or toluene to the previously unknown [Ni{cyclo-(P(5)tBu(4))PtBu}{cyclo-(P(4)tBu(3))}] (8), which presumably is formed via the intermediate [Ni{cyclo-(P(5)tBu(4))}{cyclo-(P(4)tBu(3))PtBu}], which, after an unexpected and unprecedented phosphanediide migration, gives 8, but always as an inseparable mixture with 7. In the reaction of 1 with [PtCl(2)(PPh(3))(2)], ring contraction and formation of [PtCl{cyclo-(P(4)tBu(3))PtBu}(PMe(2)Ph)] (9) is observed. Complexes 3-5 and 7-9 were characterised by (31)P NMR spectroscopy, and X-ray structures were obtained for 5-9.