An Artificially Garnet Crystal Materials Using In Terahertz Waveguide

A hypothesis is brought forward that the materials with low propagation loss in both optical and microwave band may exhibit good performance in terahertz （THz） band because THz wave band interspaces those two wave bands. For the purpose-of exploring a kind of low-loss material for THz waveguide, Lu2.1Bi0.9Fe5O12（LuBiIG） garnet films are prepared by liquid phase epitaxy （LPE） method on a gadolinium gallium garnet （GGG） substrate from lead-free flux because of the good properties in both optical and microwave bands. In microwave band, the ferromagnetic resonance （FMR） linewidth of the film 2△H = 2.8-5.1Oe; in optical band, the optical absorption coefficient is 600cm^-1 at visible range and about 100-170cm^-1 when the wavelength is longer than 800nm. In THz range, our hypothesis is well confirmed by a THz-TDS measurement which shows that the absorbance of the film for THz wave is 0.05-0.3 cm 1 and the minimum value appears at 2.3 THz. This artificial ferromagnetic material holds a great promise for magnetic field tunable THz devices such as waveguide, modulator or switch.     

Surface Emitting THz Wave Parametrical Oscillator Using MgO：LiNbO3

Room-temperature operation terahertz （THz） wave source is demonstrated using three MgO：LiNbO3 crystals which have a noncollinear arrangement. The experimental results show that the THz wave can be tunable from 0.8 THz to 3.0 THz, and the peak energy output is 103 pJ/pulse at 1.5 THz. The noncoilinear cavity configuration makes the THz beam have Gaussian-like spatial distribution, small divergence angle, perpendicularly eradiated from the crystal surface. The beam quality factor M2 is measured to be Mx^2 = 1.15, Mx^2 = 1.25 for characterizing the THz wave beam. Experiments also show that the THz beam can be focused by using a polyethylene lens, and the focal spot size is close to the diffraction limit.     

Complete Gluonic Phase in Two-Flavour Colour Superconductivity

We study a typical complete gluonic phase （LGP） in two-flavour colour superconductivity （2SC） by calculating the essential cubic and quartic interfering term between the gluonic condensates （Az^（8）） and/Az^（6）） with a gauged NJL model. It is proven that the coefficients of the cubic interfering term and the vacuum contributions of the cubic and quartic interfering term are all equal to zeroes. The coefficients of the quartic interfering term and the /Az^（6）） ＇s quartic self-interaction term at stationary points of Larkin-Ovchinnikov-Fulde-Ferrell （LOFF） phase are calculated. Comparisons among the effective potentials of LOP, g2SC and LOFF phase indicate that LOP could be the genuine ground state of 2SC for some reasonable paxameters.     

Long Lifetime State of Shallow Donor Centres for Silicon Based THz Sources

Impurity centres in high purity silicon with ionization energies 38.32 and 40.09meV are observed by photothermal ionization spectroscopy measurements. Their typical shallow donor characteristics are approved by good agreement with theoretic evaluation under varying magnetic fields. The 2p0 state lifetime of one donor centres are more than 3 times longer than that of phosphorus in the same silicon sample. Compared to phosphorus which has been already successfully exploited to produce silicon-based THz radiations, this shallow donor centre has a pronounced enhancement on lifetime and quality factor of population inversion level. Hence, silicon with this donor centre would be a potential excellent candidate to develop improved silicon-based THz sources.     

高压下FexN化合物的相分解

 本文研究了室温下压力对Fe_xN化合物相分解的影响。X射线衍射分析表明，高压促使氮原子从Fe_xN化合物的晶格中脱溶出来，引起相分解，形成母相与α-Fe。这种相分解现象随压力增大而加强。通过分析不同压力下母相Fe_xN与α-Fe的相对含量，研究了氮从Fe_xN中脱溶的动力学过程，并计算出激活体积。对于Fe₃N和Fe₄N化合物，其激活体积分别为2.24×10^-5 m³/mol和1.62×10^-5 m³/mol。本实验还指出，通过对Fe_xN化合物的高压处理以及适当条件下退火，可以获得Fe₁₆N₂化合物。     

Flexible Cu（In,Ga）Se2 Thin-Film Solar Cells on Polyimide Substrate by Low-Temperature Deposition Process

The electrical and structural properties of polycrystalline Cu（In, Ga）Se2 films grown on polyimide （PI） substrates below 400℃ via one-stage and three-stage co-evaporation process have been investigated by x-ray diffraction spectra （XRD）, scanning electron microscopy （SEM） and Hall effect measurement. As shown by XRD spectra, the stoichiometric CIGS films obtained by one-stage process exhibit the characteristic diffraction peaks of the （In0.68Ga0.32）2Se3 and Cu（In0.7Ga0.3）2Se. It is also found that the film structures indicate more columnar and compact than the three-stage process films from SEM images. The stoichiometric CIGS films obtained by three-stage process exhibit the coexistence of the secondary phase of （In0.68Ga0.32）2Se3, Cu2-xSe and Cu（In0.7Ga0.3）2Se. High net carrier concentration and sheet conductivity are also observed for this kind of film, related to the presence of Cu2-xSe phase. As a result, when the CIGS film growth temperature is below 400℃, the three-stage process is inefficient for solar cells. By using the one-stage co-evaporation process, the flexible CIGS solar cell on a PI substrate with the best conversion efficiency of 6.38% is demonstrated （active area 0.16cm^2）.     

Enhanced Magnetoresistance of （La0.67Ca0.33MnO3） Composites Coated by Zn0.95Co0.05O

La0.7Ca0.3MnO3：xZn0.95Co0.05O （x=0.0,0.05, 0.1, 0.15mol） composites are prepared by a sol-gel process. X- ray diffraction and energy diffraction spectroscopy reveal that there is no evidence of a reaction between the La0.7 Ca0.3 MnO3 （LCMO） and Zn0.95Co0.05 O （ZCO）. Magnetization M, Curie temperature Tc and metal-insulator transition temperatures Tp are observed to decrease with increasing ZCO content. Compared with x = 0.0, a great enhancement in the magnetoresistance （MR） is observed at around Tc for x = 0.05, 0.10, 0.15. Based on the tunneling MR and percolation models, this great change of MR is well explained.     

Raman Investigation of BaWO4-II Phase under Hydrostatic Pressures up to 14.8GPa

The BaW04-17 phase is synthesized at 5.0 GPa and 610~C with a cubic-anvil apparatus and identified by XRD. Raman scattering measurement is carried out to investigate the phase behaviour of a pure BaW04-Ⅱ phase （space group P21/n, Z = 8） under hydrostatic pressures up to 14.8 GPa at ambient temperature. In each spectrum recorded for this phase, 27 Raman modes are observed, and all bands shift toward higher wavenumber with a pressure dependence ranging from 3.8 to 0.2 cm- 1/GPa. No pressure-driven phase transition occurs in the entire pressure range in this study. Our results indicate that the previously reported high pressure phase of Ba WO4 at pressure above about 10 GPa and room temperature （Errandonea et al. Phys. Rev. B 73（2006）224103） is not the BaW04-Ⅱ phase.     

Effect of Silane Flow Rate on Structure and Corrosion Resistance of Ti-Si-N Thin Films Deposited by a Hybrid Cathodic Arc and Chemical Vapour Process

Ti-Si-N thin flms with different silicon contents are deposited by a cathodic arc technique in an Ar＋N2＋SiH4 mixture atmosphere. With the increase of silane flow rate, the content of silicon in the Ti-Si-N films varies from 2.0 at. % to 12.2 at. %. Meanwhile, the cross-sectional morphology of these films changes from an apparent columnar microstructure to a dense fine-grained structure. The x-ray diffractometer （XRD） and x-ray photoelectron spectroscopy （XPS） results show that the Ti-Si-N film consists of TiN crystallites and SiNx amorphous phase. The corrosion resistance is improved with the increase of silane flow rate. Growth defects in the films produced play a key role in the corrosion process, especially for the local corrosion. The porosity of the films decreases from 0.13%to 0.00032% by introducing silane at the flow rate of 14sccm.     

KNN Based Lead-Free Piezoceramics with Improved Thermal Stability

Lead-free piezoelectric ceramics （1 - x） （Na0.53K0.404 Li0.066）Nb0.92 Sb0.08 03 ＋xZrTiO3 are fabricated by conventional solid-state sintering method, and their dielectric and piezoelectric characteristics are investigated. With the addition of SrTiO3, the growth of the grain size is restrained, meanwhile the phase transition temperature of orthorhombic-tetragonal is shifted below room temperature. It is found that the ceramics with x = 0.010 exhibit excellent piezoelectric properties （d33 = 220 pC/N, kp = 41%, kt = 39%） and improved thermal stability around room temperature. The results indicate that these materials are promising lead-free piezoceramics for practical operations.     

NO--CO--O2 Reaction on a Metal Catalytic Surface using Eley--Rideal Mechanism

Interactions among the reacting species NO, CO and O2 on metal catalytic surfaces are studied by means of Monte Carlo simulation using the Eley-Rideal （ER） mechanism. The study of this three-component system is important for understanding of the reaction kinetics by varying the relative ratios of the reactants. It is found that contrary to the conventional Langmuir-Hinshelwood （LFI） thermal mechanism in which two irreversible phase transitions are obtained between active states and poisoned states, a single phase transition is observed when the ER mechanism is combined with the LH mechanism. The phase diagrams of the surface coverage and the steady state production of CO2, N2 and N2O are evaluated as a function of the partial pressures of the reactants in the gas phase. The continuous production of CO2 starts as soon as the CO pressure is switched on and the second order phase transition at the first critical point is eliminated, which is in agreement with the experimental findings.     

Red and Near-Infrared Electroluminescences from Metal-Free Phthalocyanine

Organic light emitting diodes are fabricated based on metal-free phthalocyanine (H₂Pc) doped into tris-(8-hydroxyquinoline) aluminium (Alq₃). The device structure is ITO/NPB (30nm)/Alq₃: H₂Pc(30nm)/BCP(20nm)/Alq₃(20 nm)/Al. In the light-emitting layers, H₂Pc concentrations are varied from 0wt% to 100wt%. The emissions around 708nm and 800nm appear at low concentrations, while the emissions around 910nm and 930nm appear at high concentrations. The emissions around 708nm and 800nm are from H₂Pc monomers. The emissions around 910nm and 930nm are from H₂Pc aggregates. The dominant mechanism in the doped devices is direct chargetrapping.     

Permanent Magnetic Properties of Melt-Spun YCo5Cx Ribbons

Ribbons of nominal compositions YCo5 Cx （x = 0, 0.2, 0.4, 0.6） are prepared by melt spinning at surface velocities v = 5, 10, 15, 20, 25, 30 and 35 m/s. YCo5 ribbon is crystallized in a single YCo5 phase of hexagonal CaCu5 structure. A small quantity of YCoC2 phase appears in the ribbons with C addition besides the YCo5 phase. With the increase of x the lattice constant c increases and a along with the unit cell volume decreases. The largest values of iHc = 888 kA/m and （BH）max = 58.4 k Jim3 at present for the YCo5 ribbon system were obtained with x = 0.4 and v = 20 m/s. The improvement of the permanent magnetic properties is rooted in the refinement of the microstructure and the appearance of the YCoC2 phase which can act as domain wall pinning centers.     

Polarized Micro-Raman Study of the Temperature-Induced Phase Transition In 0.67 Pb（Mg1/3Nb2/3）O3-0.33PbTiO3

Polarized Raman spectra of ferroelectric relaxor 0.67Pb（Mg1/3Nb2/3）O3-0.33PbTiO3 （0.67PMN-0.33PT） single crystal are systematically investigated in a wide temperature range from -196 to 600℃ by micro-Raman scattering technique. The results clearly reveal that there are two structural phase transitions in such composite ferroelectric relaxor： the rhombohedral-tetragonal （R- T） phase transition and the tetragonal-cubic （T- C） phase transition. The former occurs at about TR-T =34℃, corresponding to the vanishing of the soft A1 mode at 106cm^-1 recorded in the parallel polarization. The latter appears at about TT-C = 144℃, which can be verified with the vanishing of mode at 780cm^-1 measured in the crossed polarization.     

Blue-to-Orange Tunable Luminescence from Europium Doped Yttrium--Silicon--Oxide--Nitride Phosphors

Europium-doped yttrium-silicon-oxide-nitride phosphors are synthesized by carbothermal reduction and nitridation method. The crystal structure of the phosphors changed gradually from oxide Y2Si2O7 to nitride YSi3N5 state with increasing dosage of Si3N4 and carbon powder. The Y2Si2O7：Eu phosphor shows a blue emission at 465 nm with 300 nm excitation and a characteristic red emission of Eu^3＋ at 612 nm with 230 nm excitation. The YSi3N5：EU phosphor shows a broad emission band centred at 595nm with some sharp peaks of Eu^3＋ with 325nm excitation. The absorption of the studied phosphors increases from 450 to 700hm with an increment in nitrogen content. Blue-to-orange tunable luminescence is observed with 390 nm excitation.     

Phase-Transition and Magnetic Moment of the Gd3+ Ion in the Gd2Fe17 Compound

The structure and magnetic phase transitions of the Gd2Fe17 compound are investigated by using a differential thermal/thermogravimetric analyzer, x-ray diffraction, and magnetization measurements. The result shows that there are two phase structures for the Gd2Fe17 compound： the hexagonal Th2Nilr-type structure at high temperatures （above 1243℃）, and the rhombohedral Th2Zn17-type structure, respectively. A method to measure the magnetic moments of the Gd-sublattice and the Fe-sublattice in the Gd2Fe17 compound is presented. The moments of the Gd-sublattice and the Fe-sublattice in the Gd2Fe17 compound from 77 to 500 K are measured in this way with a vibrating sample magnetometer. A detailed discussion is presented.     

Femtosecond properties of photorefractive polymers

Photorefractive polymers allow to reversibly record holograms over a broad spectral range. This capability offers the possibility to store the information contained in ultrafast optical pulses (i.e., time domain) in the frequency domain. We demonstrate a storage bandwidth of >80 nm around 800 nm (i.e., >36 THz), giving a temporal resolution for Gaussian pulses of 13 fs at room temperature. Time reversal of a pulse train of 130 fs pulses confirms these capabilities.     

Laser-Duration Dependence of Emission Properties of High-Order Harmonic Generation

Quantitative investigations are made for the laser-duration dependence of the emission properties of high-order harmonic generation （HHG）. HHG emission properties produced by few-cycle lasers show some useful characteristics. The cutoff energy is less than that by laser for infinite duration. The single energy distribution pulse decreases much faster than its duration as the laser duration grows. A two-cycle laser with carrier-envelope phase of 0° can produce a single distribution pulse peaked at the laser carrier phase 1.22 rad and spanned 1.18 rad with the cutoff energy 2.9Up ＋ Ip and a bandwidth 0.63Up, where Up is the ponderomotive potential of the laser field and Ip is the atomic ionization potential.     

Research of Plasma Characteristics of the Radio-Frequency Discharge in O2 and Its Mixtures

Electron mean energy and the effects of gas mixture are studied theoretically and experimentally. The electron mean energy in O2 and its mixtures is obtained by solving Boltzmann＇s equation. The experiments of the Langmuir probe system and spectral analysis are carried out. It is shown that electron temperature goes down with the increasing pressure, narrowing pulse width and the addition of helium and argon. According to the intensity of oxygen atom at 777.19 nm, xenon is more effective in inhibition of O2 decomposition than helium and argon.     

Relationship between phase and generation mechanisms of THz waves in InAs

We investigated the thickness-dependent characteristics of THz waves from InAs epilayers whose thickness ranges from 0.01 to 1.74 μm. The amplitude showed monotonic increments up to 0.9 μm, followed by a saturation at 1.74 μm. Interestingly, the phase of THz waves was reversed around absorption depth and used to identify the transient dipole direction based on simulated band diagram. We could further distinguish dominant THz wave generation mechanisms, associated with the phase information.