有机电解液在阳极氧化法制备TiO2纳米管中的应用

二氧化钛纳米管由于其特殊的结构和优异的性能,在很多领域都有着重要的应用前景。阳极氧化法是制备二氧化钛纳米管的一种主要方法。近来,在阳极氧化法中使用有机电解液来制备二氧化钛纳米管取得了非常显著的效果。与传统的水溶性电解液相比,其深宽比和光电转换效率有了很大的提高。本文主要介绍了二氧化钛纳米管的阳极氧化原理以及有机电解液在阳极氧化法中对二氧化钛纳米管生长过程的影响。     

阳极氧化法制备二氧化钛纳米管阵列的研究

采用电化学阳极氧化法,将纯钛浸入HF酸水溶液,在钛基体表面原位构建高度有序的二氧化钛纳米管阵列,探讨阳极氧化电压、电解液浓度和电解液温度等对二氧化钛纳米管阵列尺寸和形貌的影响。通过SEM、XRD对二氧化钛纳米管阵列的结构特征进行表征,结果表明,不同的阳极氧化电压、电解液浓度和温度都将影响TiO2纳米管阵列的尺寸和形貌,在阳极氧化电压为20V,HF电解液浓度为0.5%t条件下,可制备出结构规整有序的TiO2纳米管阵列。     

含氯离子电解液中二氧化钛纳米管的阳极氧化形成机理及应用

采用电化学阳极氧化的方法,以氯化铵(NH₄Cl)水溶液为电解液,在纯钛表面制备了二氧化钛(TiO₂)纳米管。考察了制备电压、氧化时间、Cl^-浓度和钛基体的退火处理对阳极氧化过程的影响规律,探讨了在含氯离子电解液中纳米管的形成机理,并基于上述含氯离子电解液中纳米管形成机制,通过两步阳极氧化法得到无支撑纳米管薄膜。     

TiO_2纳米管阵列薄膜制备及生长机理的研究

本论文采用阳极氧化的方法,在NH4HF2+NH4H2PO4的混合水溶液中于室温下以金属钛为基体原位合成氧化钛纳米管阵列薄膜。讨论了电解液成分、外加电压、溶液的pH值对氧化钛纳米管阵列薄膜微观结构及形貌的影响,并建立了阳极氧化钛纳米管阵列薄膜的生长模型。氧化钛纳米管的结构与外加电压有很大的关系,只有电压在5～35V范围内才能制备出二氧化钛纳米管阵列薄膜,其管径随着电压的升高而增加,且管径范围为30～160nm。而薄膜的厚度与电解液有关,通过控制电解液的成分及pH值,可获得厚度为6.5μm的氧化钛纳米管阵列薄膜。     

二氧化钛纳米管阵列的制备、改性及应用

二氧化钛因其在光催化、染料敏化太阳电池、生物医药等应用领域表现出优异性能而成为材料科学领域重点研究的化合物之一。本文介绍了近年来阳极氧化法制备不同形貌的TiO2纳米管(TiO2NTs)阵列,探讨了电解液、阳极氧化时间、电压三个因素对TiO2纳米管形貌的影响,综述了掺杂、复合、表面修饰这三种能对TiO2纳米管进行化学或物理修饰的改性手段以及改性后的TiO2纳米管阵列在光催化、太阳能电池、生物医学、传感等领域的应用研究进展。最后,指出国内外针对二氧化钛纳米管阵列研究现状所存在的问题,并对今后的研究工作提出了展望。     

阳极氧化法制备二氧化钛纳米管及其在太阳能电池中的应用

介绍了阳极氧化法制备二氧化钛纳米管的技术发展历程, 论述了其制备过程及生长机理, 探讨了电解液、pH值、氧化电压、氧化时间、氧化温度和后处理方法等因素对TiO₂纳米管结构和形态的影响, 综述了近几年来利用TiO₂纳米管组装染料敏化、量子点和本体异质结等太阳能电池所取得的进展, 展望了其未来发展趋势和应用前景.     

阳极氧化法制备二氧化钛纳米管及其在太阳能电池中的应用

介绍了阳极氧化法制备二氧化钛纳米管的技术发展历程, 论述了其制备过程及生长机理, 探讨了电解液、pH值、氧化电压、氧化时间、氧化温度和后处理方法等因素对TiO₂纳米管结构和形态的影响, 综述了近几年来利用TiO₂纳米管组装染料敏化、量子点和本体异质结等太阳能电池所取得的进展, 展望了其未来发展趋势和应用前景.     

阳极氧化TiO2纳米管阵列的制备与掺杂*

近年来,TiO₂纳米管阵列的制备与应用得到了广泛的研究。阳极氧化法制备TiO₂纳米管阵列具有工艺简单、成本低廉、易于放大等优点,引起了极大关注。本文综述了阳极氧化法制备TiO₂纳米管阵列的研究现状,基于TiO₂纳米管阵列在阳极氧化过程中的生长机理,讨论了决定阳极氧化TiO₂纳米管阵列形成的主要因素。结合本组的研究工作,总结了如何通过改变电压、升压速率、电解液、温度和氧化时间,实现纳米管管径、管壁厚度、管长的有效控制,提高TiO₂纳米管阵列的表面形貌质量。最后介绍了TiO₂纳米管阵列掺杂改性方面的研究进展。     

阳极氧化法制备二氧化钛纳米管及其荧光性质

室温下采用电化学阳极氧化法在NaF、Na₂SO₄和H₂SO₄的混合溶液中用化学处理后的纯Ti片表面组装了一层结构高度有序的高密度TiO₂纳米管阵列。考察了几种主要的实验参数(阳极氧化电压、温度、电解液浓度)对TiO₂纳米管阵列形貌和尺寸的影响，探讨了二次阳极氧化对纳米管形貌的改善。对TiO₂纳米管阵列进行扫描电子显微镜(SEM)和荧光(PL)分析，探讨其生长机理。结果表明，孔径随阳极氧化电压的升高而变大，温度、电解液浓度影响反应过程中电流密度的大小；二次阳极氧化得到的纳米管的有序性有所改善，孔径大小更为均一，并且发现TiO₂纳米管的荧光具有量子效应。     

阳极氧化法制备阀金属氧化物纳米管的机理及影响因素

阳极氧化法不仅能够简便地制备出阀金属氧化物纳米管,而且通过调节各种参数可以调控所制备纳米管的形貌.阳极氧化法制备的纳米管具有优异的化学/物理性能,在众多领域都得到了广泛应用.本文综述了阳极氧化法制备纳米管膜的基本过程以及三种常见的模型,并以三种具有代表性的阀金属(Al、Ti、Zr)为例,分别介绍了它们形成多孔膜反应过程和常用的制备过程,同时也介绍了其他阀金属及其合金的制备方案.最后,结合对Al、Ti、Zr的实验过程,讨论、分析了电压大小、电解液种类、电解液浓度、反应时间等控制因素对阳极氧化法制备纳米管膜形貌的影响,对制备形貌规整的多孔膜,提高多孔膜在实际应用中的性能具有一定的意义.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.