Precise placement of gold nanorods by capillary assembly

Capillary assembly was explored for the precise placement of 25 nm × 70 nm colloidal gold nanorods on prestructured poly(dimethylsiloxane) template surfaces. The concentration of nanorods and cationic surfactant cetyltrimethylammonium bromide (CTAB), the template wettability, and most critically the convective transport of the dispersed nanorods were tuned to study their effect on the resulting assembly yield. It is shown that gold nanorods can be placed into arrayed 120-nm diameter holes, achieving assembly yields as high as 95% when the local concentration of nanorods at the receding contact line is sufficiently high. Regular arrays of gold nanorods have several benefits over randomly deposited nanorod arrangements. Each assembled nanorod resides at a precisely defined location and can easily be found for subsequent characterization or direct utilization in a device. The former is illustrated by collecting scattering spectra from single nanorods and nanorod dimers, followed by subsequent SEM characterization without the need for intricate registration schemes.     

The importance of the CTAB surfactant on the colloidal seed-mediated synthesis of gold nanorods

Gold nanorods were synthesized by the colloidal seed-mediated, surfactant-assisted approach [Gou et al., Chem. Mater. 2005, 17, 3668-3672] using CTAB (hexadecylcetyltrimethylammonium bromide) obtained from ten different suppliers. The yield of gold nanorods depended strongly on the CTAB used: with the same recipe, three of the CTABs did not yield nanorods and produced only spherical gold particles, whereas the other CTABs yielded nanorods with nearly 100% yield. These results suggest that an impurity in the CTAB is very important for nanorod formation.     

Controlling the cellular uptake of gold nanorods

Gold nanorods coated with cetyltrimethylammonium bromide (CTAB), a cationic micellar surfactant used in nanorod synthesis, were rapidly and irreversibly internalized by KB cells via a nonspecific uptake mechanism. Internalized nanorods near the cell surface were monitored by two-photon luminescence (TPL) microscopy and observed to migrate toward the nucleus with a quadratic rate of diffusion. The internalized nanorods were not excreted but formed permanent aggregates within the cells, which remained healthy and grew to confluence over a 5-day period. Nonspecific nanorod uptake could be greatly reduced by displacing the CTAB surfactant layer with chemisorptive surfactants, particularly by the conjugation of poly(ethylene glycol) chains onto nanorods using in situ dithiocarbamate formation.     

无种子法纳米金棒的制备及其对肿瘤细胞光热治疗效应研究

采用简便快捷的无种子法一步完成了纳米金棒的制备.通过改变实验条件可以调控纳米金棒的吸收峰从可见到近红外转移.将巯基聚乙二醇(PEG-SH)置换金棒表面的十六烷基三甲基溴化铵(CTAB)分子,大大提高了金棒的生物相容性.制备的纳米金棒在近红外(NIR)光照射下对肿瘤细胞有很好的杀伤效果.研究结果为纳米金棒用于抗肿瘤治疗提供了实验基础.     

小尺寸金纳米棒的快速制备及影响因素的研究

通过研究十六烷基三甲基溴化铵、抗坏血酸、NaBH4和AgNO3的用量,以及搅拌时间、反应时间对无种子生长法制备金纳米棒的影响,筛选出了最佳制备条件,以及各成分对金纳米棒生长过程中的作用.采用可见吸收光谱和透射电镜图对不同条件下所制备出的金纳米棒进行了表征.在室温为28℃,CTAB浓度为0.1 mol/L、AgNO3浓度为96μmol/L、AA浓度为0.97 mmol/L、NaBH4浓度为1.5μmol/L,搅拌25 s等最佳条件下,只需反应6h就能够成功制备出长径比为5且形貌均匀、分散性和稳定性良好、轴宽较小的金纳米棒,且有望应用于水环境中Hg2+的检测.     

无种子法纳米金棒的制备及其对肿瘤细胞光热治疗效应研究

采用简便快捷的无种子法一步完成了纳米金棒的制备. 通过改变实验条件可以调控纳米金棒的吸收峰从可见到近红外转移. 将巯基聚乙二醇（PEG-SH）置换金棒表面的十六烷基三甲基溴化铵（CTAB）分子,大大提高了金棒的生物相容性. 制备的纳米金棒在近红外（NIR）光照射下对肿瘤细胞有很好的杀伤效果.研究结果为纳米金棒用于抗肿瘤治疗提供了实验基础.     

金纳米棒荧光探针应用于多酚化合物检测新方法

以金纳米棒为荧光探针,在20％甲醇(pH 5.0～6.0)介质中,以植物多酚化合物芒果苷、瑞香素和白藜芦醇为检测对象,建立了3种植物多酚的灵敏、简便、快速检测新方法.多酚化合物基于其与金纳米棒表面的十六烷基三甲基溴化铵(CTAB)分子间的疏水作用而在金纳米棒表面富集,同时使金纳米棒在719 nm处的荧光强度减弱,在一定范围内多酚化合物的浓度与金纳米棒荧光强度成正比,其检出限分别为5.0×10-8、8.0×10-8、2.0×10 -7mol/L.     

Porous Silica‐Coated Gold Nanorods: A Highly Active Catalyst for the Reduction of 4‐Nitrophenol

The successful coating of thin porous silica layers of various thicknesses [(10±1), (12±1), and (14±1) nm] on cetyl trimethylammonium bromide (CTAB) capped gold nanorods was achieved through a modified Stöber procedure. The resulting material was applied as a novel catalyst for the reduction of 4‐nitrophenol. The catalytic activities of the gold nanorods increased up to eight times after coating with a layer of porous silica and the reaction followed a zero‐order kinetics, having a rate constant as high as 2.92×10^?1 mol L^?1 min^?1. The spectral changes during the reduction reaction of 4‐nitrophenol were observed within a very short span of time and a complete conversion to 4‐aminophenol occured within 5–6 mins, including the induction period of ≈2 mins. The reusability of the catalyst was studied by running the catalytic reaction during five consecutive cycles with good efficiency without destroying the nanostructure. The methodology can be effectively applied to the development of composite catalysts with highly enhanced catalytic activity.     

Surface modification of gold nanorods through a place exchange reaction inside an ionic exchange resin

A place exchange reaction between 11-mercaptoundecanoic acids (MUA) and cetyltrimethylammonium bromide (CTAB)-protected gold nanorods (GNRs) was conducted inside an ionic exchange resin; this modification resulted in functional gold nanorods soluble in both polar and nonpolar organic solvents.     

Immobilization of gold nanorods onto acid-terminated self-assembled monolayers via electrostatic interactions

We report the immobilization of gold nanorods onto self-assembled monolayers (SAMs) of 16-mercaptohexadecanoic acid (16-MHA). The simple two step protocol involves formation of a SAM of 16-MHA molecules onto gold-coated glass slides and subsequent immersion of these slides into the gold nanorod solution. The nanorods, formed by a seed-mediated, surfactant-assisted synthesis protocol, are stabilized in solution due to surface modification by the surfactant cetyltrimethylammonium bromide (CTAB). Attractive electrostatic interactions between the carboxylic acid group on the SAM and the positively charged CTAB molecules are likely responsible for the nanorod immobilization. UV-vis spectroscopy has been used to follow the kinetics of the nanorod immobilization. The nature of interaction between the gold nanorods and the 16-MHA SAM has been probed by Fourier transform infrared spectroscopy (FTIR). The surface morphology of the immobilized rods is studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM) measurements. SEM was also used to determine the density of the immobilized nanorods as a function of the pH of immobilization. Control over the surface coverage of the immobilized gold nanorods has been demonstrated by simple pH variation. Such well-dispersed immobilized gold nanorods with control over the surface coverage could be interesting substrates for applications such as surface-enhanced Raman spectroscopy (SERS).     

Gold nanorods as nanoadmicelles: 1-naphthol partitioning into a nanorod-bound surfactant bilayer

As-prepared gold nanorods, stable in aqueous solution, bear a bilayer of the cationic surfactant cetyltrimethylammonium bromide (CTAB). This bilayer provides a approximately 3 nm thick hydrophobic layer that could be used to sequester hydrophobic organic molecules from aqueous solution. We have investigated the uptake of 1-naphthol as a model hydrophobic compound by CTAB-coated gold nanorods using both ultraviolet-visible spectroscopy and gas chromatography with flame ionization detection. We find the adsorption isotherm of 1-naphthol partitioning into the CTAB bilayer on gold nanorods fits the Langmuir model. The maximum number of bound 1-naphthol molecules is 14.6 +/- 2.2 x 10(3) molecules per gold nanorod, with an equilibrium binding constant of 1.97 +/- 0.79 x 10(4) M(-1) at room temperature.     

Biotin-streptavidin-induced aggregation of gold nanorods: tuning rod-rod orientation

We report herein biotin-streptavidin-mediated aggregation studies of long gold nanorods. We have previously demonstrated end-to-end linkages of gold nanorods driven by the biotin-streptavidin interaction (Caswell et al. J. Am. Chem. Soc. 2003, 125, 13914). In that report, the specific binding of biotin disulfide to the gold nanorod edges was achieved due to the preferred binding of thiol molecules to the Au[111] surface (gold nanorod ends) as opposed to the gold nanorod side faces. This led to the end-end linkage of gold nanorods upon subsequent addition of streptavidin. In this report we demonstrate a simple procedure to biotinylate the entire gold nanorod surface and subsequently form a 3-D assembly by addition of streptavidin. Gold nanorods were synthesized by the three-step seeding protocol documented in our previous articles. The surface of gold nanorods was further modified by a layer of a weak polyelectrolyte, poly(acrylic acid), PAA. A biotin molecule which has an amine group at one end (biotin-PEO-amine) was anchored to the carboxylic acid group of the polyelectrolyte using the well-known carbodiimide chemistry. This process biotinylates the entire gold nanorod surface. Addition of streptavidin further leads to aggregation of gold nanorods. A closer look at the aggregates reveals a preferential side-to-side assembly of gold nanorods. The gold nanorods were characterized at each stage by UV-vis spectroscopy, light scattering, and transmission electron microscopy (TEM) measurements.     

Preparation and optical properties of worm-like gold nanorods

A type of worm-like nanorods was successfully synthesized through conventional gold nanorods reacting with Na2S2O3 or Na2S. The generated worm-like gold nanorods comprise shrunk nanorod cores and enwrapped shells. Therefore, a gold-gold sulfide core-shell structure is formed in the process, distinguishing from their original counterparts. The formation of the gold chalcogenide layers was confirmed by transmission electron microscopy and X-ray photoelectron spectroscopy. Experimental results showed that the thickness of the gold chalcogenide layers is controllable. Since the increase of shell thickness and decrease of gold nanorod core take place simultaneously, it allows one to tune the plasmon resonance of nanorods. Proper adjustment of reaction time, temperature, additives and other experimental conditions will produce worm-like gold nanorods demonstrating desired longitudinal plasmon wavelength (LPW) with narrow size distributions, only limited by properties of starting original gold nanorods. The approach presented herein is capable of selectively changing LPW of the gold nanorods. Additionally, the formed worm-like nanorods possess higher sensitive property in localized surface plasmon resonance than the original nanorods. Their special properties were characterized by spectroscopic methods such as Vis-NIR, fluorescence and resonance light scattering. These features imply that the gold nanorods have potential applications in biomolecular recognition study and biosensor fabrications.     

Retardation of shape change of Au nanorods using photo-cross-linkable ligands

The thermal reshaping of gold nanorods has been slowed by grafting a diblock copolymer [P(S-b-S-N₃)] containing an outer polystyrene (PS) brush and a short, inner photo-cross-linkable PS-azide block. The P(S-b-S-N₃)-Au NRs were dispersed in a PS thin film and reshaping was investigated using scanning electron microscopy and UV–Vis spectroscopy. For P(S-b-S-N₃)-Au NRs in PS, the longitudinal surface plasmon resonance decreased from about 880 toward 750 nm upon annealing at 100 °C, 150 °C, and 200 °C. This blue shift increased in strength as temperature increased. However, this reshaping of P(S-b-S-N₃)-Au NRs was slower than that of Au NRs grafted with a poly(ethylene glycol) brush that was dispersed in poly(methyl methacrylate). By slowing down reshaping at elevated temperature, polymer thin film devices that heat during use (e.g., polarization dependent filters) can exhibit a longer lifetime. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 301–307     

Thorough tuning of the aspect ratio of gold nanorods using response surface methodology

In the present work a central composite design based on response surface methodology (RSM) is employed for fine tuning of the aspect ratios of seed-mediated synthesized gold nanorods (GNRs). The relations between the affecting parameters, including ratio of l-ascorbic acid to Au³⁺ ions, concentrations of silver nitrate, CTAB, and CTAB-capped gold seeds, were explored using a RSM model. It is observed that the effect of each parameter on the aspect ratio of developing nanorods highly depends on the value of the other parameters. The concentrations of silver ions, ascorbic acid and seeds are found to have a high contribution in controlling the aspect ratios of NRs. The optimized parameters led to a high yield synthesis of gold nanorods with an ideal aspect ratio ranging from 1 (spherical particle) to 4.9. In addition, corresponding tunable surface Plasmon absorption band has been extended to 880 nm. The resulted nanorods were characterized by UV–visible spectrometry and transmission electron microscopy.     

Modification of gold nanorods using phosphatidylcholine to reduce cytotoxicity

Hexadecyltrimethylammonium bromide (CTAB), which is necessary for the preparation of gold nanorods (NRs), was extracted from a NR solution into a chloroform phase containing phosphatidylcholine (PC). After three extractions, the zeta potential of the NRs remained positive, but its magnitude decreased from +67 +/- 1 to +15 +/- 1 mV. Transmission electron microscopy and energy-dispersive X-ray analysis indicated that the NRs were passivated with PC. The PC layer on the NR surface contributed to the prevention of NR aggregation. The PC-passivated NRs showed low cytotoxicity in comparison with twice-centrifuged NRs. It was shown that a negligible amount of CTAB was dispersed in the NR solution after the extraction. The extraction using a chloroform phase containing PC was found to be a convenient way of replacing the CTAB with alternative capping agents such as PC. This is a key technique for preparing functional NRs that can have practical applications.     

A seedless approach to continuous flow synthesis of gold nanorods

A direct seedless method for the continuous synthesis of gold nanorods has been developed using a sequential rotating tube-narrow channel processing microfluidic configuration, with the stock feed solutions (HAuCl(4)/CTAB/acetylacetone and AgNO(3)/CTAB/carbonate buffer) being stable for weeks.     

Short gold nanorod growth revisited: the critical role of the bromide counterion

A one-step, surfactant-assisted, seed-mediated method has been utilized for the growth of short gold nanorods with reasonable yield by modifying an established synthesis protocol. Among the various parameters that influence nanorod growth, the impact of the bromide counterion has been closely scrutinized. During this study it has been shown that, irrespective of its origin, the bromide counterion [cetyltrimethylammonium bromide (CTAB) or NaBr] plays a crucial role in the formation of nanorods in the sense that there is a critical [Br(-)]/[Au(3+)] ratio (around 200) to achieve nanorods with a maximum aspect ratio. Beyond this value, bromide can be considered as a poisoning agent unless shorter nanorods are required. The use of AgNO(3) helps in symmetry breaking for gold nanorod growth, whereas the bromide counterion controls the growth kinetics by selective adsorption on the facets of the growth direction. Thus, a proper balance between bromide ions and gold cations is also one of the necessary parameters for controlling the size of the gold nanorods; this has been discussed thoroughly. The results have been discussed based on their absorption spectra and finally shape evolution has been confirmed by TEM. Due to their efficient absorption in the near-IR region, these short nanorods were used in photothermal imaging of living COS-7 cells with improved signal-to-background ratios.     

Ligand customization and DNA functionalization of gold nanorods via round-trip phase transfer ligand exchange

Customizable ligand exchange of gold nanorods (NRs) is described. NRs are synthesized with the cationic surfactant cetyltrimethylammonium bromide (CTAB) which is exchanged with thiolated ligands that enable suspension in buffer. Exchange is achieved by a two phase extraction. First, CTAB is removed from the NR-CTAB by extracting the NRs into an organic phase via the ligand dodecanethiol (DDT). The NR-DDT are then extracted into an aqueous phase by mercaptocarboxylic acids (MCA), HS-(CH 2)n -COOH (n = 5, 10, and 15). Ligands can be further customized to thiolated poly(ethylene glycol), PEG MW (MW = 356, 5000, and 1000). Ligand-exchanged NRs (NR-MCA and NR-PEG(MW)) are stable in buffer, do not aggregate, and do not change size upon ligand exchange. They can be run in agarose gel electrophoresis with narrow bands, indicating uniform charge distribution and enabling quantitative analysis. DNA functionalization of NR-MCA is straightforward and quantifiable, with minimal nonspecific adsorption.     

Gold nanorods grown on microgels leading to hexagonal nanostructures

Hexagonal patterns of gold nanorods were made by assembling gold nanorod-coated poly(N-isopropyl acrylamide) microgels. The required population of nanorods on the microgels was achieved by attaching nanoparticle seeds on the latter and growing them to nanorods. The various materials prepared were characterized by UV-vis spectroscopy and transmission electron microscopy. Similar experiments with nanoparticle-coated or prefabricated nanorod-coated microgels did not give such hexagonal patterns. We suggest that the interlocking of nanorods leads to these regular structures. This is the first report of a solution phase method for assembling nanorods into a hexagonal pattern.