EPR, 1H and 2H NMR, and reactivity studies of the iron-oxygen intermediates in bioinspired catalyst systems

Complexes [(BPMEN)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (1, BPMEN = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)-1,2-diaminoethane) and [(TPA)Fe(II)(CH(3)CN)(2)](ClO(4))(2) (2, TPA = tris(2-pyridylmethyl)amine) are among the best nonheme iron-based catalysts for bioinspired oxidation of hydrocarbons. Using EPR and (1)H and (2)H NMR spectroscopy, the iron-oxygen intermediates formed in the catalyst systems 1,2/H(2)O(2); 1,2/H(2)O(2)/CH(3)COOH; 1,2/CH(3)CO(3)H; 1,2/m-CPBA; 1,2/PhIO; 1,2/(t)BuOOH; and 1,2/(t)BuOOH/CH(3)COOH have been studied (m-CPBA is m-chloroperbenzoic acid). The following intermediates have been observed: [(L)Fe(III)(OOR)(S)](2+), [(L)Fe(IV)═O(S)](2+) (L = BPMEN or TPA, R = H or (t)Bu, S = CH(3)CN or H(2)O), and the iron-oxygen species 1c (L = BPMEN) and 2c (L = TPA). It has been shown that 1c and 2c directly react with cyclohexene to yield cyclohexene oxide, whereas [(L)Fe(IV)═O(S)](2+) react with cyclohexene to yield mainly products of allylic oxidation. [(L)Fe(III)(OOR)(S)](2+) are inert in this reaction. The analysis of EPR and reactivity data shows that only those catalyst systems which display EPR spectra of 1c and 2c are able to selectively epoxidize cyclohexene, thus bearing strong evidence in favor of the key role of 1c and 2c in selective epoxidation. 1c and 2c were tentatively assigned to the oxoiron(V) intermediates.     

硼中子捕获疗法中使用的1,2-C2B10H12异腈衍生物的结构和电子特性

利用密度泛函方法在B3LYP/6-31G(d)水平上对1,2-C2B10H12的两种异腈类衍生物的结构特性进行了研究. 结果表明, 1,2-C2B10H11NC的活性较强; 1,2-C2B10H11NC和1,2-C2B10H11CH2NC可以通过结构中的C4原子与过渡金属原子成键而形成碳硼烷异腈金属配合物. 1,2-C2B10H11NC和1,2-C2B10H11CH2NC的分子极性均比1,2-C2B10H12的弱, 这不利于它们在硼中子捕获疗法中的应用.     

Comparing reactions of H and Cl with C-H stretch-excited CHD3

We report the methyl radical product state distributions for the reactions of H and Cl with CHD3(nu1 = 1,2) at collision energies of 1.53 and 0.18 eV, respectively. Both reactions demonstrate mode selectivity. The resulting state distributions from the H+CHD3(nu1 = 1,2) reactions are well described by a spectator model. The reactions Cl + CHD3(nu1 = 1,2) exhibit similar behavior, but in some aspects the spectator model breaks down. We attribute this breakdown to enhanced intramolecular vibrational redistribution in the Cl + CHD3(nu1 = 1,2) reactions compared to the H + CHD3(nu1 = 1,2) reactions, caused by the interaction of the slower Cl atom with the vibrationally excited CHD3, which is promoted either by its longer collision duration, its stronger coupling, or both.     

Restricted rotation in unbridged sandwich complexes: rotational behavior of closo-[Co(eta 5-NC4H4)(C2B9H11)] derivatives

Rotation about the centroid/metal/centroid axis in ferrocene is facile; the activation energy is 1-5 kcal mol(-1). The structurally similar sandwich complexes derived from closo-[3-Co(eta5-NC4H4)-1,2-C2B9H11] (1) have a different rotational habit. In 1, the cis rotamer in which the pyrrolyl nitrogen atom bisects the carboranyl cluster atoms is 3.5 kcal mol(-1) more stable in energy than the rotamer that is second lowest in energy. This cis rotamer is wide, spanning 216 degrees , and may be split into three rotamers of almost equal energy by substituting the N and the carboranyl carbon atoms adequately. To support this statement, closo-[3-Co(eta5-NC4H4)-1,2-(CH3)2-1,2-C2B9H9] (2), closo-[3-Co(eta5-NC4H4)-1,2-(mu-CH2)3-1,2-C2B9H9] 3, 2-->BF3, and 3-->BF3 have been prepared. Two rotamers are found at low temperature for 2-->BF(3) and 3-->BF3. Compounds 2, 3, and 1-->BF3 behave similarly to 1. Rotational energy barriers and the relative populations of the different energy states are calculated from 1H DNMR spectroscopy (DNMR, dynamic NMR). These results agree with those of semiempirical calculations. Without exception, the cis rotamer is energetically the more stable. The fixed conformation of 1 assists in elucidating the rotational preferences of the [3,3'-Co(1,2-C2B9H11)2]- ion in the absence of steric hindrance; the [3,3'-Co(1,2-C2B9H11)2]- ion is commonly accepted to present a cisoid orientation. Complex 1 is electronically similar to the [3,3'-Co(1,2-C2B9H11)2]- ion. Both have heteroatoms in the pi ligands, and they have the same electronegativity difference between the constituent atoms. This leads to a view of the [NC4H4]- as [7,8-C2B9H11]2- ion, with no steric implications. Therefore the [3,3'-Co(1,2-C2B9H11)2]- ion should be considered to have a cisoid structure, and the different rotamers observed to be the result of steric factors and of the interaction of the counterion with either B-H groups and/or ancillary ligands. The rotamer adopted is the one with the atoms holding the negative charges furthest apart.     

H2 activation in aqueous solution: formation of trans-[Fe(DMeOPrPE)2H(H2)]+ via the heterolysis of H2 in water

The water-soluble iron phosphine complex trans-Fe(DMeOPrPE)(2)Cl(2) (DMeOPrPE = 1,2-bis(bis(methoxypropyl)phosphino)ethane) reacts with H(2) in water to produce trans-[Fe(DMeOPrPE)(2)H(H(2))](+) and H(+). The product is a water-soluble eta(2)-H(2) metal hydride complex, formed via the heterolysis of coordinated H(2) in water.     

Energetic and topological analysis of the reaction of Mo and Mo2 with NH3, C2H2, and C2H4 molecules

The Density functional theory has been applied to characterize the structural features of Mo(1,2)-NH(3),-C(2)H(4), and -C(2)H(2) compounds. Coordination modes, geometrical structures, and binding energies have been calculated for several spin multiplets. It has been shown that in contrast to the conserved spin cases (Mo(1,2)-NH(3)), the interaction between Mo (or Mo(2)) and C(2)H(4) (or C(2)H(2)) are the low-spin (Mo-C(2)H(4) and -C(2)H(2)) and high-spin (Mo(2)-C(2)H(4) and -C(2)H(2)) complexes. In the ground state of Mo(1,2)-C(2)H(4) and -C(2)H(2), the metal-center always reacts with the C-C center. The spontaneous formation of the global minima is found to be possible due to the crossing between the potential energy surfaces (ground and excited states with respect to the metallic center). The bonding characterization has been performed using the topological analysis of the Electron Localization Function. It has been shown that the most stable electronic structure for a pi-acceptor ligand correlates with a maximum charge transfer from the metal center to the C-C bond of the unsaturated hydrocarbons, resulting in the formation of two new basins located on the carbon atoms (away from hydrogen atoms) and the reduction of the number of attractors of the C-C basin. The interaction between Mo(1,2) and C(2)H(4) (or C(2)H(2)) should be considered as a chemical reaction, which causes the multiplicity change. Contrarily, there is no charge transfer between Mo(1,2) and NH(3), and the partners are bound by an electrostatic interaction.     

First hexadecavanadate compound: hydrothermal synthesis and characterization of a three-dimensional framework [(Cu(1,2-pn)2)7(V16O38(H2O))2].4H2O

The hydrothermal reaction of V2O5, Cu(CH3COO)2.H2O, 1,2-diaminopropane and [N(CH3)4]OH yields the novel three-dimensional open-framework solid [(Cu(1,2-pn)2)7-(V16O38(H2O))2].4H2O constructed from the new mixed-valence [V16O38(H2O)]7- clusters interconnected through mu 2-[Cu(1,2-pn)2]2+ groups.     

The action of organolithium compounds on phthalazine and I (2H)-phthalazinone

Phthalazine and 1(2H)-phthalazinone undergo 1,2-addition of organolithium compounds to C = N to give, following hydrolysis, 1 - substituted - 1,2 - dihydrophthalazines and 4-substituted-3,4-dihydro-1(2H)-phthalazinones respectively. These dihydro-derivatives may be easily autoxidized to the corresponding 1-substituted phthalazines and 4-substituted-1(2H)-phthalazinones.     

An efficient one-pot, three-component synthesis of indeno[1,2-b]quinoline-9,11(6H,10H)-dione, acridine-1,8(2H,5H)-dione and quinoline-3-carbonitrile derivatives from enaminones

An efficient one-pot, three-component method for the preparation of indeno[1,2-b]quinoline-9,11(6H,10H)-dione, acridine-1,8(2H,5H)-dione and various multi-substituted quinoline-3-carbonitrile derivatives has been developed through the Michael addition to enaminones, which was achieved by both microwave irradiation and conventional heating.     

C2H5C60H的加成产物的结构和光谱性质的量子化学研究

用INDO系列方法对C₂H₅C₆₀H的1,2-加成和1,4-加成两种产物异构体的结构进行了理论研究,结果表明1,2-C₂H₅C₆₀H具有Cs对称性,1,4-C₂H₅C₆₀H没有任何对称性,1,2-C₂H₅C₆₀H的总能量比1,4-C₂H₅C₆₀H的低。以此优化构型为基础,计算了两种产物异构体的电子吸收光谱,讨论了其光谱红移的原因,同时对产物的NMR谱进行了探讨。     

"Water-stable boron-iodinated dicarbollide dianions [7,8-nido-C2H2B9I9]2- and [7,8-nido-C2H2B9I8H]2-"

The reaction of 3,4,5,7,8,9,10,11,12-I(9)-1,2-closo-C(2)B(10)H(3) with KOH/EtOH gave a mixture of the boron periodinated [1,2,3,4,5,6,9,10,11-I(9)-7,8-nido-C(2)B(9)H(2)](2-) and the highly iodinated on boron [1,2,4,5,6,9,10,11-I(8)-7,8-nido-C(2)B(9)H(3)](2-) in approximately 50% each. Moreover, 3,4,5,6,7,8,9,10,11,12-I(10)-1,2-closo-C(2)B(10)H(2) was reacted with KOH/EtOH to purely produce [1,2,3,4,5,6,9,10,11-I(9)-7,8-nido-C(2)B(9)H(2)](2-). It is the first dinegative dicarbollide stable in water or protic solvent reported in literature.     

Sulfido-bridged dinuclear molybdenum-copper complexes related to the active site of CO dehydrogenase: [(dithiolate)Mo(O)S2Cu(SAr)]2- (dithiolate = 1,2-S2C6H4, 1,2-S2C6H2-3,6-Cl2, 1,2-S2C2H4)

The [MoCu] carbon monoxide dehydrogenase (CODH) is a Cu-containing molybdo-flavoprotein, the active site of which contains a pterin-dithiolene cofactor bound to a sulfido-bridged dinuclear Mo-Cu complex. In this paper, the synthesis and characterization of dinuclear Mo-Cu complexes relevant to the active site of [MoCu]-CODH are described. Reaction of [MoO2S2]2- with CuCN affords the dinuclear complex [O2MoS2Cu(CN)]2- (1), in which the CN- ligand can be replaced with various aryl thiolates to give rise to a series of dinuclear complexes [O2MoS2Cu(SAr)]2- (Ar = Ph (2), o-Tol (3), and p-Tol (4)). An alternative synthesis of complex 2 is the reaction of [MoO2S2]2- with [Cu(SPh)3]2-. Similarly, [O2MoS2Cu(PPh3)]- (5), [O2MoS2Cu(dppe)]- (dppe = 1,2-bis(diphenylphosphino)ethane) (6), and [O2MoS2Cu(triphos)]- (triphos = 1,1,1-tris[(diphenylphosphino)methyl]ethane) (7) were prepared from the reactions of [MoO2S2]2- with the Cu(I) phosphine complexes. Treatment of 1, 2, 4, or 5 with dithiols (1,2-(SH)2C6H4, 1,2-(SH)2C6H2-3,6-Cl2, and 1,2-(SH)2C2H4), in acetonitrile, leads to the replacement of a molybdenum-bound oxo ligand to yield [(dithiolate)Mo(O)S2CuL]2- (L = CN, SAr; dithiolate = 1,2-S2C6H4, 1,2-S2C6H2-3,6-Cl2, or 1,2-S2C2H4) (8-13) or [(1,2-S2C6H4)Mo(O)S2Cu(PPh3)]- (14) complexes.     

Preparation of alpha-diazocarbonyl compounds from beta-lapachone derivatives and other 1,2-naphthoquinones: use of the 2D NMR 1H,15N and 1H,13C HMBC techniques in assigning regiochemistry

The assignment of the diazo site in products of the reaction of p-toluenesulfonylhydrazine with beta-lapachone, 3,4-dihydro-2,2-dimethyl-2H-naphtho[1,2-b]pyran-5,6-dione, and other 1,2-naphthoquinones in methanol solution at room temperature has been accomplished using 1H,13C HMBC and 1H,15N HMBC NMR experiments. Only one diazo-naphthalenone product was isolated in yields ranging from 50-100% from each reaction. The site of diazo substitution of beta-lapachone and derivatives is the 1-position, in contrast to substitution at the 2-position in 4-MeO-1,2-naphthoquinone. Steric factors, rather than electronic factors, control the reaction site. Along with 2-diazo-1(2H)-naphthalenone, an additional product isolated from the reaction of p-toluenesulfonylhydrazide with 1,2-naphthoquinone was 2-diazo-4-hydroxy-1(2H)-naphthalenone. Confirmation of the formation of 6-diazo-2,2-dimethyl-2,3,4,6-tetrahydro-2H-benzo[h]cromen-5-one, obtained from beta-lapachone, was achieved using single crystal X-ray diffraction.     

混合溶剂中多组分电解质溶液热力学性质的研究I: 5-45℃下氯化氢-氯化钠-1,2-丙二醇-水体系

在恒定1,2-丙二醇摩尔分数X为0.05的混合溶剂中,在5-45℃温度范围内测定无液接电池Pt,H2(1 atm)HCl(ma),1,2-C3H5(OH)2(X),H2O(1-X)|AgCl-Ag(A)和Pt,H2(1 atm)|HCl(ma),NaCl(mb),1,2-C3H5(OH)2(X),H2O(1-X)|AgCl-Ag (B)的电动势.利用电池A的电动势确定混合溶剂中Ag-AgCl电极的标准电极电势,利用电池B的电动势确定了HCl在混合溶剂的多组分电解质溶液中的活度系数γA.指出了在恒定总离子强度下HCl仍然服从Harned规则,在溶液组成恒定时,logγA是温度T的线性函数.HCl的相对偏摩尔焓遵守类似的Harned规则,计算了HCl的一级、二级和总介质效应.     

Solvent Effect of DMSO-d6 on 1,2-Diols in 1H NMR

There is a classic experiential rule about 1,2-diol RCR^1 （OH） CR^1 （OH） R（ R^1 = H or methyl）, that is, the proton chemical shift of the α-R^1 group at the hydroxvl group in the all-isomer, in general, aPPears in a higher field with ca.     

Optimized relaxivity and stability of [Gd(H(2,2)-1,2-HOPO)(H2O)]- for use as an MRI contrast agent

Relaxometry and solution thermodynamic measurements show that Gd(H(2,2)-1,2-HOPO) is a good candidate as a contrast agent for magnetic resonance imaging (MRI-CA). Acidic, octadentate H(2,2)-1,2-HOPO forms a very stable Gd(III) complex [pGd=21.2(2)]. The coordination sphere at the Gd(III) center is completed by one water molecule that is not replaced by common physiological anions. In addition, this ligand is highly selective for Gd(III) binding in the presence of Zn(II) or Ca(II). The symmetric charge distribution of the 1,2-HOPO chelates is associated with favorably long electronic relaxation time T1,2e comparable to those of GdDOTA. This, in addition to the fast water exchange rate typical of HOPO chelates, improves the relaxivity to r1p=8.2 mM-1 s-1 (0.47 T). This remarkably high value is unprecedented for small-molecule, q=1 MRI-CA.     

1,2-Dibromoethane on Cu(100): bonding structure and transformation to C2H4

Temperature-programmed reaction/desorption, mass spectrometry, reflection-absorption infrared spectroscopy, x-ray photoelectron spectroscopy, and density functional theory calculations have been employed to explore the reaction and bonding structure of 1,2-C(2)H(4)Br(2) on Cu(100). Both the trans and gauche conformers are found to dissociate by breaking the C-Br bonds on clean Cu(100) at 115 K, forming C(2)H(4) and Br atoms. Theoretical investigations for the possible paths of 1,2-C(2)H(4)Br(2) → C(2)H(4) + 2Br on Cu(100) suggest that the barriers of the trans and gauche molecules are in the ranges of 0-4.2 and 0-6.5 kcal/mol, respectively. The C-Br scission temperature of C(2)H(4)Br(2) is much lower than that (~170 K) of C(2)H(5)Br on Cu(100). Adsorbed Br atoms can decrease the dissociation rate of the 1,2-C(2)H(4)Br(2) molecules impinging the surface. The 1,2-C(2)H(4)Br(2) molecules adsorbed in the first monolayer are structurally distorted. Both the trans and gauche molecules exist in the second monolayer, but with no preferential adsorption orientation. However, the trans molecule is the predominant species in the third or higher layer formed at 115 K. The layer structure is not thermally stable. Upon heating the surface to 150 K, the orientation of the trans 1,2-C(2)H(4)Br(2) molecules in the layer changes, leading to the rotation of the BrCCBr skeletal plane toward the surface normal on average and the considerable growth of the CH(2) scissoring peak. On oxygen-precovered Cu(100), decomposition of 1,2-C(2)H(4)Br(2) to form C(2)H(4) is hampered and no oxygenated hydrocarbons are formed. The presence of the oxygen atoms also increases the adsorption energy of the second-layer molecules.     

二氧化硅负载硅钨钼酸催化合成环己酮1,2-丙二醇缩酮

采用溶胶-凝胶法制备了二氧化硅负载硅钨钼酸催化剂。以二氧化硅负载硅钨钼酸为催化剂,环己酮和1,2-丙二醇为原料合成了环己酮1,2-丙二醇缩酮,用正交实验法研究了反应物料配比、催化剂用量、带水剂用量、反应时间等因素对反应的影响。结果表明,在n(环己酮)∶n(1,2-丙二醇)=1∶1.4,催化剂用量为反应物料总质量的0.8%,带水剂环己烷12 mL,反应时间45 min的优化条件下,环己酮1,2-丙二醇缩酮的收率可达84.93%。     

Preparation of brassylic acid from 5,6,7,8,9,10,11,12,13,14-decahydrocyclododeca[1,2-d]pyrimidine(1H, 3H)-2,4-dione obtained by the condensation of cyclododecanone and urea or biuret

A simple method is proposed for the preparation of brassylic acid by the alkaline hydrolysis of 5,6,7,8,9,10,11,12,13,14-decahydrocyclododeca[1,2-d]pyrimidine(1H, 3H)dione-2,4, which is the product of the condensation of cyclododecanone with urea or biuret. The condensation of the cyclododecanone with thiourea proceeds differently, leading to 5,6,7,8,9,10,11,12,13,14-decahydrocyclododeca[1,2-d]pyrimidine(1H, 3H)spirocyclododecane-2-thione-4.A. N. Nesmeyanov Institute of Organometallic Compounds, Russian Academy of Sciences, 117813 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 226–229, January, 1992.     

Pyrrolopyrimidines. 5. Reaction of 6-Amino-1,3-dimethylpyrrolo[3,4-d]pyrimidine-2,4(1H,3H)-diones with 1,3-Diketones

The reaction of 6-amino-1,3-dimethylpyrrolo[3,4-d]pyrimidine-2,4-dione with 1,3-diketones leads to formation of predominantly pyrimido[4',5':3,4]pyrrolo[1,2-b]pyridazine-2,4(1H,3H)-diones and, to a lesser extent, pyrimido[5',4':3,4]pyrrolo[1,2-b]pyridazine-1,3(2H,4H)-diones. The ease and direction of the cyclization reaction suggests a very -electron rich pyrrole ring in the initial state, especially in the position 7.