Electrodeposition of nano- and microcrystalline aluminium in three different air and water stable ionic liquids.

The present work shows, for the first time, a comparative experimental study on the electrodeposition of aluminium in three different water and air stable ionic liquids, namely 1-butyl-1-methylpyrrolidinium-bis(trifluoromethylsulfonyl)imide ([BMP]Tf2N), 1-ethyl-3-methylimidazolium-bis(trifluoromethylsulfonyl)imide ([EMIm] Tf2N), and trihexyl-tetradecyl-phosphoniumbis(trifluoromethylsulfonyl)imide (P(14,6,6,6) Tf2N). The ionic liquids [BMP]Tf2N and [EMIm]Tf2N show biphasic behaviour in the AlCl3 concentration range from 1.6 to 2.5 mol L(-1) and 2.5 to 5 mol L(-1), respectively. The biphasic mixtures become monophasic at temperatures >/=80 degrees C. It was found that nanocrystalline aluminium can be electrodeposited in the ionic liquid [BMP]Tf2N saturated with AlCl3. The deposits obtained are generally uniform, dense, shining, and adherent with very fine crystallites in the nanometer size regime. However, coarse cubic-shaped aluminium particles in the micrometer range are obtained in the ionic liquid [EMIm]Tf2N. In this liquid the particle size significantly increases as the temperature rises. A very thin, mirrorlike aluminium film containing very fine crystallites of about 20 nm is obtained in the ionic liquid [trihexyl-tetradecyl-phosphonium]Tf(2)N at room temperature. At 150 degrees C, the average grain size is found to be 35 nm.     

Correlating backbone‐to‐backbone distance to ionic conductivity in amorphous polymerized ionic liquids

The morphology and ionic conductivity of poly(1‐n‐alkyl‐3‐vinylimidazolium)‐based homopolymers polymerized from ionic liquids were investigated as a function of the alkyl chain length and counterion type. In general, X‐ray scattering showed three features: (i) backbone‐to‐backbone, (ii) anion‐to‐anion, and (iii) pendant‐to‐pendant characteristic distances. As the alkyl chain length increases, the backbone‐to‐backbone separation increases. As the size of counterion increases, the anion‐to‐anion scattering peak becomes apparent and its correlation length increases. The X‐ray scattering features shift to lower angles as the temperature increases due to thermal expansion. The ionic conductivity results show that the glass transition temperature (T_g) is a dominant, but not exclusive, parameter in determining ion transport. The T_g‐independent ionic conductivity decreases as the backbone‐to‐backbone spacing increases. Further interpretation of the ionic conductivity using the Vogel–Fulcher–Tammann equation enabled the correlation between polymer morphology and ionic conductivity, which highlights the importance of anion hoping between adjacent polymer backbones. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

An intermediate for the clean synthesis of ionic liquids: isolation and crystal structure of 1,3-dimethylimidazolium hydrogen carbonate monohydrate

1,3-Dimethylimidazolium-2-carboxylate and carbonic acid have been used to prepare a 1,3-dimethylimidazolium hydrogen carbonate salt by means of a Krapcho reaction. The ability to form hydrogen carbonate azolium salts allows for them to be used as precursors for fast, efficient, environmentally benign, and halide-free syntheses of many ionic liquids by a simple, acid-base reaction of virtually any acid (inorganic, organic, and organic noncarboxylic) with a pK(a) less than that of HCO(3) (-). Additionally, the kinetics of this reaction can be accelerated by employing catalytic amounts of DMSO (a traditional Krapcho solvent used in decarboxylation reactions) to catalyze the decarboxylation. The crystal structure of 1,3-dimethylimidazolium hydrogen carbonate monohydrate is the first example of an imidazolium-based hydrogen carbonate salt. There is a strong 2D hydrogen-bonded network with facially pi-stacked imidazolium cations located in the cavities created by this framework.     

Optical and diffractive studies of pyridinium-based ionic liquids

Electronic absorption, steady-state fluorescence spectra and X-ray diffraction patterns for several pyridinium-based ionic liquids (ILs) (1-butyl-3-methylpyridinium tetrafluoroborate, 1-butyl-4-methylpyridinium tetrafluoroborate, 1-octyl-3-methylpyridinium tetrafluoroborate and 1-butyl-3-methylpyridinium dicyanamide) have been obtained. A systematic study has been performed for different ILs in terms of structural characteristics obtaining remarkable results. The present characterisation, centre of attention in theoretical and practical fields, leads to understand the complex behaviour of such compounds and is an essential step for their potential development as new solvents in extended applications.     

Self-assembled structure in room-temperature ionic liquids

Self-assembled vesicles, structurally equivalent to some hydrotropes, have been obtained from a Zn2+-fluorous surfactant or in the mixture of Zn2+-fluorous surfactant/zwitterionic surfactant in room-temperature ionic liquids (RTILs). The existence of bilayers arranged in vesicles in RTILs would be very exciting, open several new possibilities as reaction media, and increase our understanding of the physical and chemical factors for self-assembling systems in RTILs.     

Lanthanide ion extraction by trifluoromethyl-1,3-diketonate-functionalised ionic liquids adsorbed on silica

While acetylacetone (acacH) derivatives are, upon deprotonation, ubiquitous ligands in coordination chemistry, their potential to form stable ionic liquids has not been studied so far. Here we describe a straightforward synthesis of novel trifluoroacetylacetone-functionalised imidazolium salts. These salts are built from an imidazolium ring substituted on one side with a flexible chain of fixed length carrying a terminal acacH group and on the opposite side a paraffin chain of various lengths. By changing the length of these flexible chains (n=4, 8, 12) and the nature of the counter-anions (PF(6)(-), BF(4)(-), NTf(2)(-)), room-temperature ionic liquids were produced. Their application for the extraction of lanthanide salts (Eu, Tb) from dilute aqueous solution has been investigated. The presence of a strong UV absorber (imidazolium ring, λ(abs)=290 nm) allows photosensitisation of the Eu(III) and Tb(III) luminescence by efficient energy transfer, and thus extraction of these two lanthanides can be followed by fluorescence techniques. It appears that loading of the ionic liquids onto silica particles pre-treated with a dilute aqueous solution of NaOH is the most efficient way to obtain fast and almost quantitative (>99.9%) extraction of the metal ions as their diketonato complexes. The procedure is reproducible and the loaded SiO(2) particles can be simply treated with acid to strip the metal ions and regenerate the adsorbed (protonated) extractant.     

Recent developments of task-specific ionic liquids in organic synthesis

Abstract

Task-specific ionic liquids (TSILs) have received increased attention over the past few years as it is possible to form any specific ionic liquid (IL) composition depending upon user's need of the desired physical, chemical, and biological properties. These fascinating materials have shown promising results in various areas such as organic synthesis, catalysis, and specially recent emerging trend of use as functionalized ILs for chiral and nanoparticle synthesis. Present review gives an update of recent developments in the field of TSILs with emphasis on their applications in organic synthesis.     

Applications of functionalized ionic liquids

Recent developments of the synthesis and applications of functionalized ionic liquids (including dual-functionalized ionic liquids) have been highlighted in this review. Ionic liquids are at-tracting attention as alternative solvents in green chemistry, but as more functionalized ILs are pre-pared, a greater number of applications in increasingly diverse fields are found.     

Ionic Liquids as Unique Solvents in One‐Pot Synthesis of 4‐(N,2,2,2‐Tetranitroethylamino)‐3‐R‐Furazans

An efficient two‐step one‐pot protocol for the synthesis of N‐nitrated trinitroethylamino furazans in an ionic liquid has been developed involving the condensation of aminofurazans with trinitroethanol and the N‐nitration of an intermediate Mannich base. Trinitroethylnitramino derivatives have been synthesized and characterized by multinuclear NMR spectroscopy and X‐ray crystallography. A role of the N,2,2,2‐tetranitroethylamino group for stabilization of the high‐density crystal‐packing motif is described. The performance calculations gave detonation pressures and velocities for the furazan derivatives in a range of about 31–36 GPa and 8330–8745 ms^?1, respectively, which makes them competitive energetic materials. Furthermore, due to the positive oxygen balance, the compounds could be potential oxidizers for energetic formulations.     

Tetraalkylphosphonium-based ionic liquids

Ionic liquids are salts that are liquid at or near room temperature. Their wide liquid range, good thermal stability, and very low vapor pressure make them attractive for numerous applications. The general approach to creating ionic liquids is to employ a large, unreactive, low symmetry cation with and an anion that largely controls the physical and chemical properties. The most common cations used in ionic liquids are N-alkylpyridinium and N,N′-dialkylimidazolium. Another very effective cation for the creation of ionic liquids is tetraalkylphosphonium, [PR₁R₂R₃R₄]⁺. The alkyl groups, R_n, generally are large and not all the same. The halide salts of several phosphonium cations are available as starting materials for metathesis reactions used to prepare ionic liquids. The large phosphonium cations can combine with relatively large anions to make viscous but free flowing liquids with formula mass greater than 1000 g mol⁻¹. Some other more massive salts are waxes and glasses. The synthesis and the physical, chemical, and optical properties of phosphonium-ionic liquids having anions with a wide range of masses were measured and are reported here.     

Synthesis,photophysical and electrochemical properties,and biological labeling studies of cyclometalated iridium(III) bis(pyridylbenzaldehyde) complexes: novel luminescent cross-linkers for biomolecules

We report the synthesis, characterization, photophysical, and electrochemical properties of a series of luminescent cyclometalated iridium(III) complexes containing two aldehyde functional groups [Ir(pba)(2)(N-N)](PF(6)) (Hpba=4-(2-pyridyl)benzaldehyde; N-N=2,2'-bipyridine, bpy (1), 1,10-phenanthroline, phen (2), 3,4,7,8-tetramethyl-1,10-phenanthroline, 3,4,7,8-Me(4)-phen (3), 4,7-diphenyl-1,10-phenanthroline, 4,7-Ph(2)-phen (4)). The X-ray crystal structure of complex 1 has been investigated. Upon photoexcitation, complexes 1-4 exhibit intense and long-lived emission in fluid solutions at 298 K and in low-temperature glass. The luminescence is assigned to a triplet intra-ligand ((3)IL) excited state associated with the pba(-) ligand, probably with mixing of some triplet metal-to-ligand charge-transfer ((3)MLCT) (dpi(Ir)-->pi*(pba(-))) character. Since each of these complexes possesses two aldehyde groups, which can react with the primary amine groups of biomolecules to form stable secondary amines after reductive amination, we have investigated the possibility of these complexes as novel luminescent cross-linkers for biological substrates. L-Alanine has been labeled with complexes 1-4 to give the luminescent bioconjugates 1-(Ala)(2)-4-(Ala)(2). These conjugates show strong photoluminescence with long emission lifetimes under ambient conditions. On the basis of the emission energy trend, the excited state of these luminescent bioconjugates is likely to bear a high parentage of (3)MLCT (dpi(Ir)-->pi*(N-N)) character. In addition, the glycoprotein avidin (Av) has also been conjugated with complexes 1-4 to give the bioconjugates 1-Av-4-Av. Upon photoexcitation, these bioconjugates also display intense and long-lived (3)MLCT (dpi(Ir)-->pi*(N-N)) emission in aqueous buffer at 298 K. Furthermore, a heterogeneous competitive assay for biotin has been developed using 2-Av and biotinylated microspheres. We have shown that complexes 1-4 represent a new class of multicolor luminescent cross-linkers for biomolecular species.     

Synthesis,characterization and oxygen‐sensing properties of a novel luminescent Cu(I) complex

A novel luminescent copper(I) complex with formula [Cu(PPh₃)₂(PIP)]BF₄ (PPh₃ = triphenyl phosphine, PIP = 2‐phenyl‐1H‐imidazo[4,5‐f][1,10]phenanthroline) has been synthesized and characterized by ¹H NMR, IR, elemental analysis and X‐ray crystal structure analysis. In solid state, it displays broad band emission upon excitation at λ = 420 nm with the emission maximum locates at 551 nm. Its excited‐state lifetime is in the microsecond time scale (3.02 µs); as a result, its emission intensity is sensitive to oxygen concentration and shows oxygen‐sensing properties after being encapsulated into mesoporous silica MCM‐41. For the system with 60 mg/g loading level, a sensitivity (I₀/I) of 4.35, a fluorescence quenching time (t_Q) of 5 s and a recovery time (t_R) of 36 s were achieved. Even after aging for 5 months, the sensitivities of the three loading level systems can be retained, ignoring the measurement error, which indicates that they possess long‐term stability. Copyright © 2009 John Wiley & Sons, Ltd.     

离子液体中的不对称催化反应*

对价格昂贵的手性催化剂进行回收和重复利用是目前不对称催化领域面临的难题之一,受到学术界和工业界的共同关注。化学家们已经尝试了许多方法,其中使用离子液体来替代常规有机溶剂使催化剂得到分离和重新使用已经引起他们极大的兴趣。本文综述了近年来在离子液体中进行不对称催化反应的研究进展,对离子液体中过渡金属和有机小分子催化的各种反应进行重点介绍,强调了离子液体不但在催化剂回收方面有独特优势,而且在许多反应中能够提高催化效率。     

Alanine-supported protic ionic liquids as efficient catalysts for aldol condensation reactions

A series of novel protic ionic liquids were immobilized on alanine, a cheap readily available amino acid. These short aliphatic chain ionic liquids have a low cost of preparation, a low toxicity, and need simple synthesis/purification processes. Their catalytic activity was tested for citral–acetone and benzaldehyde–acetone condensations, two reactions with an interest for pharmacological as well as flavor and fragrance industry. Good results were obtained in terms of conversion and selectivity; moreover, the catalysts can be recycled and reused for several consecutive cycles without significant loss of activity.     

Ionic‐Liquid‐Derived,Water‐Soluble Ionic Cellulose

A new type of water‐soluble ionic cellulose was obtained by means of the dissolution of cellulose in dimethylimidazolium methylphosphite at elevated temperatures over 120 °C. FTIR spectroscopy, ¹H and ¹³C NMR spectroscopy, and elemental analysis results revealed that the repeating unit of the water‐soluble cellulose consists of a dialkylimidazolium cation and a phosphite anion bonded to cellulose. The degree of phosphorylation on the cellulose chain was between 0.4 and 1.3 depending on the reaction temperature and time. With an increasing degree of phosphorylation, water solubility was increased. Scanning electron microscopy and X‐ray diffraction analyses revealed that the cellulose crystalline phase in the parent crystalline cellulose changed to an amorphous phase upon transformation into ionic cellulose. Thermogravimetric analysis showed the prepared phosphorylated cellulose was stable over 250 °C and a substantial amount of residue remained at 500 °C.     

Lanthanoid‐Based Ionic Liquids Incorporating the Dicyanonitrosomethanide Anion

A series of low‐melting‐point salts with hexakisdicyanonitrosomethanidolanthanoidate anions has been synthesised and characterised: (C₂mim)₃[Ln(dcnm)₆] ( 1 Ln ; 1 Ln = 1 La , 1 Ce , 1 Pr , 1 Nd ), (C₂C₁mim)₃[Pr(dcnm)₆] ( 2 Pr ), (C₄C₁pyr)₃[Ce(dcnm)₆] ( 3 Ce ), (N₁₁₁₄)₃[Ln(dcnm)₆] ( 4 Ln ; 4 Ln = 4 La , 4 Ce , 4 Pr , 4 Nd , 4 Sm , 4 Gd ), and (N_1112OH)₃[Ce(dcnm)₆] ( 5 Ce ) (C₂mim=1‐ethyl‐3‐methylimidazolium, C₂C₁mim=1‐ethyl‐2,3‐dimethylimidazolium, C₄C₁py=N‐butyl‐4‐methylpyridinium, N₁₁₁₄=butyltrimethylammonium, N_1112OH=2‐(hydroxyethyl)trimethylammonium=choline). X‐ray crystallography was used to determine the structures of complexes 1 La , 2 Pr , and 5 Ce , all of which contain [Ln(dcnm)₆]^3? ions. Complexes 1 Ln and 2 Pr were all ionic liquids (ILs), with complex 3 Ce melting at 38.1 °C, the lowest melting point of any known complex containing the [Ln(dcnm)₆]^3? trianion. The ammonium‐based cations proved to be less suitable for forming ILs, with complexes 4 Sm and 4 Gd being the only salts with the N₁₁₁₄ cation to have melting points below 100 °C. The choline‐containing complex 5 Ce did not melt up to 160 °C, with the increase in melting point possibly being due to extensive hydrogen bonding, which could be inferred from the crystal structure of the complex.