十一、参数方程与极坐标

知识要点］本章的主要考试内容：１．曲线的参数方程,参数方程与普通方程的互化．２．极坐标系,曲线的极坐标方程,圆锥曲线的极坐标方程,极坐标与直角坐标的互化．［地位和作用］参数方程是曲线方程的一种表现形式,它借助于函数、方程、不等式、三角等研究方法和研究...     

“直线方程的一般式”教学设计

一、教材分析 本课所用的教材是苏教版必修2的第二章2．1．2直线方程的一般式． 1．教材的地位 直线方程的一般式是继“直线方程的四种特殊形式”之后,对直线方程作进一步研究．从教材整体看：直线的方程既是初中二元一次方程知识的延续（数形结合）,     

方程的解析与欣赏

一、欣赏方程中的文化 含有未知数的等式叫做方程．研究方程必须研究等式,关注方程与等式的区别与联系．香港数学教育专家提出一个以下与正常思维相悖的问题,会使学生感到震惊．     

例谈超越方程问题的解题技巧

超越方程就是含有未知字母的指数、对数、三角等运算的方程．由于其形式的超越性,求解此类方程时,一般代数方程的解法往往难以奏效．本文总结此类方程的一些特殊解题技巧,以飨读者．     

十、圆锥曲线

知识要点］曲线与方程的概念．能利用给定条件选择适当坐标系求出曲线的方程，能通过曲线的方程来研究曲线的性质．对于一些常见曲线的方程应能根据其方程画出该方程所表示的曲线．理解充要条件的意义及在数学变形过程中的等价性问题．圆锥曲线的定义、它们的标准方程及有...     

Kac方程的解及其性质

研究Kac方程的初值问题．证明了该类方程存在唯一的全局分布解．并且使用一种新的线性化方法证明了该类方程的解具有相应的多项式衰减性．     

用积分因子法解二阶线性常微方程尝析

读文,思方法之巧,关键是以同乘两边后．得到一个恰当方程,因为此时方程左边恰是关于x的全导数,恰是的积分因子．那么,二阶线性常微方程是否可以类似解决呢？首先,让我们从恰当方程开始讨论．为方便我们假定以下讨论中所涉及函数的定义域均为凸区域．若左边是某函数关于x的全导数,称该方程是恰当方程．同一方程两边同乘产后成一恰当方程,叫原方程的积分因子．可见定理1是恰当方程的充要条件是：．证明充分性显然．必要性：若是恰当方程,则使得由①,F是y’的一次函数,设,三一千,联系②式知,凡（x,y）是y的一次函数．设几（x,…     

曲线 何必与方程捆绑——圆锥曲线寻根统一定义

正因为方程可以成为曲线的“化身”,所以才有了解析几何．但我们不能不分青红皂白地把曲线与方程弄成身形相依的捆绑：一提曲线,就想它的方程;一提方程,就想它的曲线．好像是：一旦离开了方程,曲线就不存在了一样．     

方程意识浅谈

方程意识浅谈胡高志（贵州省毕节一中５５１７００）方程思想是中学生必须具备的一种十分重要的数学思想．有意运用方程，自觉寻找方程，并善于觉察方程的存在，这就是方程意识．自觉的方程意识的养成，将使学生真正领悟到方程思想方法的意义和真谛之所在．因此对学生的方...     

相对论性Birkhoff系统动力学方程的代数结构与Poisson积分方法

定义相对论性Ｐｆａｆｆ作用量,得到相对论性Ｐｆａｆｆ Ｂｉｒｋｈｏｆｆ原理和相对论性Ｂｉｒｋｈｏｆｆ方程．证明了自治形式和半自治形式的相对论性Ｂｉｒｋｈｏｆｆ方程具有相容代数结构和Ｌｉｅ代数结构;一般非 自治形式的相对论性Ｂｉｒｋｈｏｆｆ方程没有代数结构．研究一种特殊的非自治形式的相对论性Ｂｉｒｋｈｏｆｆ方程,它具有相容代数结构和Ｌｉｅ容许代数结构．给出相对论性Ｂｉｒｋｈｏｆｆ方程的Ｐｏｉｓｓｏｎ积分 方法．最后给出应用性实例．     

Physicomechanical characteristics of a disperse-filled polytetrafluoroethylene

Composite polymer materials based on PTFE containing ultradisperse -sialon (1–10 wt.%) as the cross-linking agent are studied. It is shown that the injection of small amounts of fillers (1–2 wt.%) increases the degree of composite crystallinity. A correlation between the structure, element distribution on the surface layers of samples, and tribotechnical characteristics of composites is found. The change in the physicomechanical characteristics is associated with the effect of the interstructural plasticization.Ammosov Yakutsk State University, Yakutsk, Russia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 797–806, November–December, 1999.     

A REPRESENTATION FORMULA RELATED TO SCHR(O)DINGER OPERATORS

Schr(o)dinger operator is a central subject in the mathematical study of quantum mechanics.Consider the Schrodinger operator H = -△ V on R, where △ = d2/dx2 and the potential function V is real valued. In Fourier analysis, it is well-known that a square integrable function admits an expansion with exponentials as eigenfunctions of -△. A natural conjecture is that an L2 function admits a similar expansion in terms of "eigenfunctions" of H, a perturbation of the Laplacian (see [7], Ch. Ⅺ and the notes), under certain condition on V.     

Staircase transportation problems with superadditive rewards and cumulative capacities

A cumulative-capacitated transportation problem is studied. The supply nodes and demand nodes are each chains. Shipments from a supply node to a demand node are possible only if the pair lies in a sublattice, or equivalently, in a staircase disjoint union of rectangles, of the product of the two chains. There are (lattice) superadditive upper bounds on the cumulative flows in all leading subrectangles of each rectangle. It is shown that there is a greatest cumulative flow formed by the natural generalization of the South-West Corner Rule that respects cumulative-flow capacities; it has maximum reward when the rewards are (lattice) superadditive; it is integer if the supplies, demands and capacities are integer; and it can be calculated myopically in linear time. The result is specialized to earlier work of Hoeffding (1940), Fréchet (1951), Lorentz (1953), Hoffman (1963) and Barnes and Hoffman (1985). Applications are given to extreme constrained bivariate distributions, optimal distribution with limited one-way product substitution and, generalizing results of Derman and Klein (1958), optimal sales with age-dependent rewards and capacities.To our friend, Philip Wolfe, with admiration and affection, on the occasion of his 65th birthday.Research was supported respectively by the IBM T.J. Watson and IBM Almaden Research Centers and is a minor revision of the IBM Research Report [6].     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

A model for predicting the shear bearing capacity of FRP-strengthened beams

The shear failure of reinforced concrete beams needs more attention than the bending failure since no or only small warning precedes the failure. For this reason, it is of utmost importance to understand the shear bearing capacity and also to be able to undertake significant rehabilitation work if necessary. In this paper, a design model for the shear strengthening of concrete beams by using fiber-reinforced polymers (FRP) is presented, and the limitations of the truss model analogy are highlighted. The fracture mechanics approach is used in analyzing the bond behavior between the FRP composites and concrete. The fracture energy of concrete and the axial rigidity of the FRP are considered to be the most important parameters. The effective strain in the FRP when the debonding occurs is determined. The limitations of the anchorage length over the cross section are analyzed. A simple iterative design method for the shear debonding is finally proposed. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 44, No. 3, pp. 357–372, May–June, 2008.     

Superapproximation and Commutator Properties of Discrete Orthogonal Projections for Continuous Splines

This paper builds upon the L_p-stability results for discrete orthogonal projections on the spaces S_h of continuous splines of order r obtained by R. D. Grigorieff and I. H. Sloan in (1998, Bull. Austral. Math. Soc.58, 307–332). Properties of such projections were proved with a minimum of assumptions on the mesh and on the quadrature rule defining the discrete inner product. The present results, which include superapproximation and commutator properties, are similar to those derived by I. H. Sloan and W. Wendland (1999, J. Approx. Theory97, 254–281) for smoothest splines on uniform meshes. They are expected to have applications (as in I. H. Sloan and W. Wendland, Numer. Math. (1999, 83, 497–533)) to qualocation methods for non-constant-coefficient boundary integral equations, as well as to the wide range of other numerical methods in which quadrature is used to evaluate L₂-inner products. As a first application, we consider the most basic variable-coefficient boundary integral equation, in which the constant-coefficient operator is the identity. The results are also extended to the case of periodic boundary conditions, in order to allow appplication to boundary integral equations on closed curves.     

Coordinate and subspace optimization methods for linear least squares with non-quadratic regularization

This work addresses the problem of regularized linear least squares (RLS) with non-quadratic separable regularization. Despite being frequently deployed in many applications, the RLS problem is often hard to solve using standard iterative methods. In a recent work [M. Elad, Why simple shrinkage is still relevant for redundant representations? IEEE Trans. Inform. Theory 52 (12) (2006) 5559–5569], a new iterative method called parallel coordinate descent (PCD) was devised. We provide herein a convergence analysis of the PCD algorithm, and also introduce a form of the regularization function, which permits analytical solution to the coordinate optimization. Several other recent works [I. Daubechies, M. Defrise, C. De-Mol, An iterative thresholding algorithm for linear inverse problems with a sparsity constraint, Comm. Pure Appl. Math. LVII (2004) 1413–1457; M.A. Figueiredo, R.D. Nowak, An EM algorithm for wavelet-based image restoration, IEEE Trans. Image Process. 12 (8) (2003) 906–916; M.A. Figueiredo, R.D. Nowak, A bound optimization approach to wavelet-based image deconvolution, in: IEEE International Conference on Image Processing, 2005], which considered the deblurring problem in a Bayesian methodology, also obtained element-wise optimization algorithms. We show that the last three methods are essentially equivalent, and the unified method is termed separable surrogate functionals (SSF). We also provide a convergence analysis for SSF. To further accelerate PCD and SSF, we merge them into a recently developed sequential subspace optimization technique (SESOP), with almost no additional complexity. A thorough numerical comparison of the denoising application is presented, using the basis pursuit denoising (BPDN) objective function, which leads all of the above algorithms to an iterated shrinkage format. Both with synthetic data and with real images, the advantage of the combined PCD-SESOP method is demonstrated.     

Effect of the adhesion interaction and the degree of filling on the internal stresses in finely divided crystalline fillers of epoxy composites

Two kinds of model composite materials with finely divided (1) crystal fillers—LiF or polyethylene-filled epoxy resin cured by polyethylenepolyamine — are investigated by X-ray diffractometry. It is found that tensile stresses arise in LiF crystals, which show a strong adhesion interaction with the binder, for all degrees of filling (from =2.2 to =74 vol.%) examined. Their values remain constant up to a degree of filling at which the boundary layers come into contact with one another. Then, the inner stresses decrease with increasing . In the crystalline regions of polyethylene, where the adhesion between the binder and crystals is weak, the inner stresses are compressive. It is shown that the thickness of the boundary layer of the matrix on the surface of filler particles can be evaluated by the method used.Institute of Polymer Mechanics, Latvian University, Riga, LV-1006 Latvia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 807–820, November–December, 1999.     

Rigid isotopy classification of real algebraic curves of bidegree (3,3) on quadrics

A rigid isotopy of nonsingular real algebraic curves on a quadric is a path in the space of such curves of a given bidegree. We obtain the rigid isotopy classification of nonsingular real algebraic curves of bidegree (3, 3) on a hyperboloid and on an ellipsoid. We also study of the space of real algebraic curves of bidegree (3, 3) with a single node or cusp. Translated fromMatematicheskie Zametki, Vol. 66, No. 6, pp. 810–815, December, 1999.     

Embeddings of the classesH ω

In this paper we study functions belonging to the classesV _ε and ΛBV, which are encountered in the theory of Fourier trigonometric series. Necessary and sufficient conditions for the embedding of the classesH _ω in the classesV _ϕ and ABV are obtained. Translated fromMatematicheskie Zametki, Vol. 64, No. 5, pp. 713–719, November, 1998. This research was supported by the program “Leading Scientific Schools” under grant No. 96/97-15-96073.