NMR/MRI study of clathrate hydrate mechanisms

Clathrate hydrates are of great importance in many aspects. However, hydrate formation and dissociation mechanisms, essential to all hydrate applications, are still not well understood due to the limitations of experimental techniques capable of providing dynamic and structural information on a molecular level. NMR has been shown to be a powerful tool to noninvasively measure molecular level dynamic information. In this work, we measured nuclear magnetic resonance (NMR) spin lattice relaxation times (T1's) of tetrahydrofuran (THF) in liquid deuterium oxide (D2O) during THF hydrate formation and dissociation. At the same time, we also used magnetic resonance imaging (MRI) to monitor hydrate formation and dissociation patterns. The results showed that solid hydrate significantly influences coexisting fluid structure. Molecular evidence of residual structure was identified. Hydrate formation and dissociation mechanisms were proposed based on the NMR/MRI observations.     

Micromechanical cohesion force measurements to determine cyclopentane hydrate interfacial properties

Hydrate aggregation and deposition are critical factors in determining where and when hydrates may plug a deepwater flowline. We present the first direct measurement of structure II (cyclopentane) hydrate cohesive forces in the water, liquid hydrocarbon and gas bulk phases. For fully annealed hydrate particles, gas phase cohesive forces were approximately twice that obtained in a liquid hydrocarbon phase, and approximately six times that obtained in the water phase. Direct measurements show that hydrate cohesion force in a water-continuous bulk may be only the product of solid-solid cohesion. When excess water was present on the hydrate surface, gas phase cohesive forces increased by a factor of three, suggesting the importance of the liquid or quasi-liquid layer (QLL) in determining cohesive force. Hydrate-steel adhesion force measurements show that, when the steel surface is coated with hydrophobic wax, forces decrease up to 96%. As the micromechanical force technique is uniquely capable of measuring hydrate-surface forces with variable contact time, the present work contains significant implications for hydrate applications in flow assurance.     

Hydrate-phobic surfaces: fundamental studies in clathrate hydrate adhesion reduction

Clathrate hydrate formation and subsequent plugging of deep-sea oil and gas pipelines represent a significant bottleneck for deep-sea oil and gas operations. Current methods for hydrate mitigation are expensive and energy intensive, comprising chemical, thermal, or flow management techniques. In this paper, we present an alternate approach of using functionalized coatings to reduce hydrate adhesion to surfaces, ideally to a low enough level that hydrodynamic shear stresses can detach deposits and prevent plug formation. Systematic and quantitative studies of hydrate adhesion on smooth substrates with varying solid surface energies reveal a linear trend between hydrate adhesion strength and the practical work of adhesion (γ(total)[1 + cos?θ(rec)]) of a suitable probe liquid, that is, one with similar surface energy properties to those of the hydrate. A reduction in hydrate adhesion strength by more than a factor of four when compared to bare steel is achieved on surfaces characterized by low Lewis acid, Lewis base, and van der Waals contributions to surface free energy such that the practical work of adhesion is minimized. These fundamental studies provide a framework for the development of hydrate-phobic surfaces, and could lead to passive enhancement of flow assurance and prevention of blockages in deep-sea oil and gas operations.     

High-pressure clathrate hydrate of acetone

X-ray diffraction study of quenched sample of acetone clathrate hydrate synthesized at 0.8 GPa was carried out. It was shown that the host frameworks of the hydrate comprise uniform cavities which are similar to that of recently characterized structure of high-pressure tetrahydrofurane hydrate. The unique peculiarity of investigated hydrate is decrease in the crystallographic symmetry of the hydrate arising from ordering in guest subsystem.     

Interfacial adhesion mechanisms in incompatible semicrystalline polymer systems

The mechanism of adhesion at semicrystalline polymer interfaces between isotactic polypropylene (iPP) and linear low‐density polyethylene (PE) was studied with transmission electron microscopy (TEM) and an asymmetric‐double‐cantilever‐beam test. From the TEM images, both the interfacial width and the lamellar thickness of the polymers were extracted. During annealing, the interfacial width increased with the annealing temperature, and this indicated the accumulation of amorphous polymers at the interface. The interfacial strength, determined from the critical fracture energy (G_c), also increased with the annealing temperature and reached a maximum above the melting temperatures of iPP and PE, whereas the smallest G_c value was obtained below the melting temperatures of the two materials. A mechanism of interfacial strengthening was proposed accounting for the competition between the interdiffusion of PE and crystallization of iPP. As the annealing temperature increased, the rates of PE diffusion and iPP crystallization increased. Although the crystallization of iPP hindered the interdiffusion of PE, both the interfacial width and the fracture energy increased with the temperature, and this indicated that PE interdiffusion dominated iPP crystallization. Below the critical temperature, the fracture surfaces of both iPP and PE were smooth, and chain pullout dominated the fracture mechanism. Above the critical temperature, iPP crystallization still hindered the interdiffusion, and crazes could be seen on the iPP side. Above the melting temperatures of the two materials, ruptured surfaces could also be seen on the PE side, and crazing was the fracture mechanism. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2667–2679, 2004     

Structure of oxygen clathrate hydrate by neutron powder diffraction

Oxygen hydrate was prepared by reacting oxygen with deuteriated ice at high pressure. Its structure was examined with powder neutron diffraction. It was found to crystallize in the cubic space group witha=17.070(1) Å. The formation of the type II structure rather than type I can be attributed to the larger Langmuir constant of sorption for the oxygen molecules in the 12-hedral cages. The encaged oxygen molecules are orientationally disordered. A comparison of the oxygen thermal parameters in both cages suggests the existence of local potential minima in the 16-hedral cages.Published as NRCC 25940     

129Xe nuclear magnetic resonance in the clathrate hydrate of xenon

The sensitivity of the nuclear magnetic shielding of the Xe atom to the physical environment makes it possible to “see” well-separated. ¹²⁹Xe resonances from Xe atoms in the small and large clathrate deuteriohydrate cages as well as in the gas with which the hydrate is in equilibrium. The relative occupancy of the small cages is suostantially less than predicted oy existing models of guest-host interactions in Xe gas hydrate.     

Molecular mechanisms of hydrogen-loaded beta-hydroquinone clathrate

Molecular dynamics simulations are used to investigate the molecular interactions of hydrogen-loaded beta-hydroquinone clathrate. It is found that, at lower temperatures, higher loadings are more stable, whereas at higher temperatures, lower loadings are more stable. Attractive forces between the guest and host molecules lead to a stabilized minimum-energy configuration at low temperatures. At higher temperatures, greater displacements take the system away from the shallow energy minimum, and the trend reverses. The nature of the cavity structure is nearly spherical for a loading of one, leads to preferential occupation near the hydroxyl ring crowns of the cavity with a loading of two, and at higher loadings, leads to occupation of the interstitial sites (the hydroxyl rings) between cages by a single H(2) molecule with the remaining molecules occupying the equatorial plane of the cavity. Occupation of the interstitial positions of the cavities leads to facile diffusion.     

Thermal expansivity of tetrahydrofuran clathrate hydrate with diatomic guest molecules

The guest dynamics and thermal behavior occurring in the cages of clathrate hydrates appear to be too complex to be clearly understood through various structural and spectroscopic approaches, even for the well-known structures of sI, sII, and sH. Neutron diffraction studies have recently been carried out to clarify the special role of guests in expanding the host water lattices and have contributed to revealing the influence factors on thermal expansivity. Through this letter we attempt to address three noteworthy features occurring in guest inclusion: (1) the effect of guest dimension on host water lattice expansion; (2) the effect of thermal history on host water lattice expansion; and (3) the effect of coherent/incoherent scattering cross sections on guest thermal patterns. The diatomic guests of H 2, D 2, N 2, and O 2 have been selected for study, and their size and mass dependence on the degree of lattice expansion have been examined, and four sII clathrate hydrates with tetrahydrofuran (THF) have been synthesized in order to determine their neutron powder diffraction patterns. After thermal cycling, the THF + H 2 clathrate hydrate is observed to exhibit an irreversible plastic deformation-like pattern, implying that the expanded lattices fail to recover the original state by contraction. The host-water cage dimension after degassing the guest molecules remains as it was expanded, and thus host-guest as well as guest-guest interactions will be altered if guest uptake reoccurs.     

Water cavities of sH clathrate hydrate stabilized by molecular hydrogen

X-ray diffraction and Raman spectroscopic measurements confirm that molecular hydrogen can be contained within the small water cavities of a binary sH clathrate hydrate using large guest molecules that stabilize the large cavity. The potential increase in hydrogen storage could be more than 40% when compared with binary sII hydrates. This work demonstrates the stabilization of hydrogen in a hydrate structure previously unknown for encapsulating molecular hydrogen, indicating the potential for other inclusion compound materials with even greater hydrogen storage capabilities.     

A simple chemical model for clathrate hydrate inhibition by polyvinylcaprolactam

A dimeric model compound gives structural insight into the mode of interaction of low dosage hydrate inhibitors with water.     

Texture change of ice on anomalously preserved methane clathrate hydrate

We used a confocal scanning microscope to observe growth and texture change of ice due to the dissociation of methane gas clathrate hydrate (CH(4) hydrate). The experiments were done under CH(4) gas atmospheric pressure and isothermal conditions between 170 and 268 K. Above 193 K, the dissociation of CH(4) hydrate resulted in many small ice particles that covered the hydrate surface. These ice particles had roughly the same shape and density between 193 and 210 K. In contrast, above 230 K the ice particles developed into a sheet of ice that covered the hydrate surface. Moreover, the measured release of CH(4) gas decreased when the sheet of ice formed at the surface of the hydrate. These findings can explain the anomalous preservation behavior of CH(4) hydrate; that is, the known increase of storage stability of CH(4) hydrate above 240 K is likely related to the formation of the ice that we observed in the experiments.     

Heat capacity and glass transition of ethylene oxide clathrate hydrate

The heat capacity of structure I ethylene oxide clathrate hydrate EO-6.86 H₂O was measured in the temperature range 6–300 K with an adiabatic calorimeter. The temperature and enthalpy of congruent melting were determined to be (284.11 ± 0.02) K and 48.26 kJ mol^–1, respectively. A glass transition related to the proton configurational mode in the hydrogen-bonded host was observed around 90 K. This glass transition was similar to the one observed previously for the structure II tetrahydrofuran hydrate but showed a wider distribution of relaxation times. The anomalous heat capacity and activation enthalpy associated with the glass transition were almost the same as those for THF-hydrate.Dedicated to Dr D. W. Davidson in honor of his great contributions to the sciences of inclusion phenomena.Author for correspondence.