Experimental pressure dependence of the accelerated current in the chamber of the sirius synchrotron

An experimental study of the dependence of the accelerated charge in the synchrotron on the vacuum-chamber pressure is reported. The results are compared with calculations; in the pressure range 5 · 10^–6–2 · 10^–5 torr, the experimental and calculated results agree well.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, Vol. 12, No. 2, pp. 31–35, February, 1969.The authors thank P. P. Krasnonosen'kikh for assistance in the experiments and G. P. Fomenko for discussion of the results.     

X-ray diffraction investigation of the hexagonal-fcc structural transition in yttrium trihydride under hydrostatic pressure

Pressure induced structural transition of yttrium hydride has been investigated using synchrotron radiation X-ray diffraction measurement up to 24 GPa at room temperature. A reversible hexagonal-fcc transition with a wide intermediate region from 11 to 20 GPa is confirmed, which is consistent with previously reported X-ray results. The diffraction patterns measured for the intermediate state are not interpreted in terms of a hexagonal-fcc coexisting state or as rare-earth structures with various metal-layer stacking sequences. The equation of state determined for the hexagonal-YH₃ provides a bulk modulus B₀ of 71.9 GPa, which is nearly half of the previously reported value, but is within the range of values reported for other rare-earth metal trihydrides with hexagonal structures.     

Radiative lifetimes of highly excited odd-parity levels of neutral lanthanum

New radiative lifetimes of 24 high-lying odd-parity levels of neutral lanthanum are reported using time-resolved laser-induced fluorescence (TR-LIF) spectroscopy. The investigated levels ranging from 34 213 to 40 910 cm^-1 were excited from the ground or metastable states using one-photon excitation. La atoms are produced by laser ablation on a solid La sample. The lifetimes were evaluated from transient LIF signals detected with a fast detection system. The obtained lifetime results, generally with uncertainties less than  ±7%, are in the range from 15.7 to 121 ns.     

In search of photon’s elementary axial magnetostatic field

 Experimental investigations of the photon’s B ⁽³⁾-field (third longitudinal polarization) are reported. The existence of an “axial magnetostatic field of photon” has been predicted in B _π or B ⁽³⁾-theory as the fundamental property of the circularly polarized light, and reported in numerous papers and monographs. High-sensitivity detection has been employed in photomagnetic induction, Faraday, and inverse Faraday effects (IFE) originating from such a field. The results of all three experiments clearly disprove the claims of B _π-theory. Putting together these results and theoretical calculations in perspective, it is concluded that such fields are non-existent. Received: 25 January 1996 / Revised version: 24 May 1996     

Optical limiting behavior of disperse red 1 dye doped polymer

Measurements of optical limiting response in disperse red 1 dye doped into ethylene propylene diene polymethylene polymer (EPDM) are reported using 532 nm wavelength, 10 ns pulses from a frequency-doubled Nd-YAG laser. The optical limiting behavior of the dye doped polymer was studied by transmission measurement technique at various concentrations. The results reveal that the optical limiting efficiency is dependent on concentration.     

A microscopy study of the effect of heat treatment on the structure and properties of anodised TiO2 nanotubes

Titanium oxide (TiO₂) nanotubes prepared by anodisation of titanium in an aqueous electrolyte and glycerol have been heat treated in the temperature range 200-600 °C to control the conversion of the amorphous structure to nano-crystalline anatase and rutile. The phase changes have been monitored are observed at lower temperatures (100 °C or more) than previously reported. The sensitivity of the different techniques, each of which depends on the size of the crystalline phase, can explain the discrepancy with previous results. Transmission electron microscopy (TEM) has shown the phase changes which have occurred and which have been reported in an earlier publication; phenomena such as the collapse of the structures are explained. The TEM results are consistent with the Raman and XRD data, apart from the transformation temperatures, and also shed light on the nature of an amorphous phase found on the surfaces of the nanotubes.     

Surface resistance of an YBaCuO film in the megahertz range determined from the Q factor of a planar inductance coil: Effect of extrinsic factors

High-quality YBaCuO films are used to sequentially prepare a 10-GHz disk resonator and a planar inductance coil. The Q factor of the planar inductance coil at its resonance frequency (64 MHz) is much higher than the values reported for analogous structures. The measurement results are used to estimate the surface resistance of the films at frequencies of 10 GHz and 64 MHz. The surface resistance measured at 64 MHz is more than fourfold of that calculated from the surface resistance measured at 10 GHz by the dependence R _sur ∼ ω². Our analysis demonstrates that extrinsic factors cannot substantially affect the measurement results; therefore, the deviation from the R _sur ∼ ω² dependence in the megahertz range is determined by the intrinsic properties of the superconducting strip.     

Positron backscattering from solid targets: Modeling of scattering processes via various approaches

Monte Carlo simulation of 1–4 keV positron backscattering from semi-infinite solid targets ranging from Be (z = 4) to Au (z = 79) with normal angle of incidence is here reported. In our study, the elastic and inelastic scattering cross sections are modeled by using various approaches based on either a classical or a quantum mechanical treatment. Calculations of positron backscattering coefficient are then reported for the solid targets of interest. The results obtained show a fairly good agreement with the data available in the literature. The dependence of the positron backscattering coefficient versus the atomic number of the solid target of interest has been investigated. In this respect, polynomial functions are proposed which does not require any recourse to Monte Carlo calculations.     

Depth profiling of copper thin films by resonant laser ablation

In Resonant Laser Ablation (RLA), material is related and selectively ionized by a low-energy pulse from a tunable laser. The selectivity and efficiency allow detection and quantitation at very low concentrations. We demonstrate that RLA has potential use in profiling thin layer and multilayer structures. Quantitative results are reported on the analysis of 20 and 100 Å copper thin films on Si(110) surfaces. Removal rates range from 10^–3 to 10^–2 Å/shot. Prospects for interrogation of dopants and impurities are also evaluated.     

Effect of maceoscopic structure on the thermal expansion of synthetic graphite

The predominant-orientation parameters and grain defectiveness (microscopic cracks and pores) have been evaluated for extruded coke-pitch samples subjected to various types of heat treatment (220–2770 °K). The calculations are based on a previously reported theoretical model and experimental thermal-expansion coefficients for temperatures in the range 300–1070 °K. The results are used in a discussion of the effect of macroscopic structure on thermal expansion.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii Fizika, No. 8, pp. 52–56, August, 1969.     

Control of nanoparticle size and agglomeration through electric-field-enhanced flame synthesis

The isolated study of electrophoretic transport of nanoparticles (that are innately charged through thermionic emission), with no ionic wind, has been conducted under uniform electric fields. Titania nanoparticles are produced using a burner-supported low-pressure premixed flame in a stagnation-point geometry from corresponding organometallic vapor precursor. The material processing flow field is probed in-situ using laser-induced fluorescence (LIF) to map OH-radical concentrations and gas-phase temperatures. The experimental results of particle growth under different applied electric fields are compared with computations using monodisperse and sectional models. The results show that such electric field application can decrease aggregate particle size (e.g. from 40 to 18 nm), maintain metastable phases and particle crystallinity, and non-monotonically affect primary particle size (e.g. from 6 to 5 nm) and powder surface area. A specific surface area (SSA) for anatase titania nanopowder of 310 m²/g, when synthesized under an applied electric field of 125 V/cm, is reported. Results are also given for the synthesis of alumina nanoparticles.     

Low-energy electron scattering from gaseous CS<Subscript>2</Subscript>: angular distributions and effect of exchange forces

Ab initio calculations are reported for the quantum scattering of electrons from CS₂ molecules in the gas phase and for energies which range from near threshold up to about 100 eV. Angular distributions are examined in detail and an extensive comparison is made with existing experiments and earlier calculations. The agreement found with the latter data is fairly good and results are further discussed in terms of a physical mechanism of “exchange level shifting" to explain the disappearance of a Π_u resonance suggested by earlier studies.     

Phase diagram of the Bi-Sn system in the liquid and solid states

Results are given for the specific resistance, thermo-emf, and magnetic susceptibility in the range from room temperature up to 500 °C. The methods of measurement have previously been reported [1]. Each property is presented as a function of composition; the results are compared with ones for the system Bi-Cd. The temperature dependence of the three quantities is calculated for the alloy of eutectic composition.     

Photoluminescence emissions of ceramics: a marker of production technology

Photoluminescence (PL) measurements have been performed on different sets of ceramic shards; the results obtained from the ceramic bodies of lustred majolicas produced in Iraq, Italy and Spain are reported. Non-lustred samples are analysed for comparison. The spectra obtained from all the lustred samples show PL emission bands that are attributed to the presence of α-quartz and diopside. The photoluminescence of the lustre-decorated ceramics is possibly a fingerprint of the particular production technology of lustre. PACS 81.05.Mh; 78.55.Hx     

Optical properties of GaAs

The optical absorption coefficient and complex dielectric response function of pure GaAs is measured at ambient temperature in the range of 100–20000cm^–1 using two different techniques. The results reported here are in agreement with results reported in other published work. In order to improve the efficiency of the GaAs to be used as a solar cell, we propose, on the basis of emperical formula and data available in the literature, the amount of dopping, appropriate to increasing the efficiency of GaAs as a solar cell.     

The influence of thermal annealing on the structural and magnetic properties of gold nanoparticles

In the past few years ferromagnetic-like behavior has been reported in metal gold nanoparticles coated with diverse organic surfactants. In this work we report on the effect of thermal annealing on the ferromagnetic-like behavior of oleic acid and oleylamine coated gold nanoparticles of about 7 nm size. The magnetic moment of the “as prepared” sample is about 3×10⁻² emu/g and the coercive field is 200 Oe at 10 kOe and 5 K, after the annealing the behavior changes from ferromagnetic-like to paramagnetic and the magnetization at 10 kOe decreases at a factor of 10. These results are compared with those obtained for oleylamine coated gold nanoparticles, which are diamagnetic at room temperature.     

Ring opening reaction of 1,3-cyclohexadiene studied by semiclassical dynamics simulation

A semiclassical dynamics simulation study is reported for the ring opening reaction of 1,3-cyclohexadiene (CHD) triggered by a femtosecond-scale laser pulse. The results clearly demonstrate that, following the excitation by the laser pulse, the ring opening occurs at ∼110 fs and the molecule decays to the ground electronic state at ∼210 fs due to non-adiabatic transition of electrons from LUMO to HOMO orbitals. Isomerization of the product of the ring opening reaction, 1,3,5-hexatriene (HT), to various stable isomers are also well demonstrated by the simulations.     

Study of wind characteristics at heights of 200 to 800 meters using a decimeter sodar

The results of the experiment carried out in July–August 1997 using a two-position sodar are reported. Different types of intensity and spectrum variations of scattered acoustic signals have been obtained. The possibilities of using the sodar for the study of atmospheric turbulence and search of signals caused by “Fresnel” scattering from “plane” irregularities are discussed. Radiophysical Research Institute, Nizhny Novgorod, Russia. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 41, No. 7, pp. 841–848, July, 1998.     

An EPR study of Ni+ centers in SrF2:Ni and BaF2:Ni

An EPR study of RT X-irradiated SrF2:Ni and BaF2:Ni has been performed. Different kinds of Ni⁺ centers showing small deviations with respect to a basic structure have been observed. This basic structure consists of a Ni⁺ ion displaced along a <100> direction from the cation substitutional position toward the center of a face of the cube of fluorines. These results are similar to those previously reported on CaF2:Ni.

The spin Hamiltonian parameters of the different centers obtained from the analysis of the corresponding rotational diagrams are also reported.     

First-principles study of the pentacene/Cu(1 1 1) interface: Adsorption states and vacuum level shifts

We have studied the interaction of pentacene with a Cu(1 1 1) surface using density functional theory (DFT) within a generalized gradient approximation (GGA) and the van der Waals density functional [vdW-DF, M. Dion, H. Rydberg, E. Schröder, D.C. Langreth, B.I. Lundqvist, Phys. Rev. Lett. 92 (2004) 246401]. The adsorption energy is accurately predicted by vdW-DF, while the equilibrium distances between pentacene and the metal substrate (Z_C) are overestimated by both GGA and vdW-DF. The work function changes depend significantly on Z_C. The experimental work function change can be successfully reproduced by GGA if the experimentally reported adsorption geometry is used, whereas the magnitude of the work function change is underestimated if calculated adsorption geometries are applied. We examined the IDIS model [H. Vázquez, R. Qszwaldowski, P. Pou, J. Ortega, R. Pérez, F. Flores, A. Kahn, Europhys. Lett. 65 (2004) 802] to compare it with the GGA results. The interface dipoles estimated by the IDIS model fairly agree with the GGA results, provided that the adsorption distance is large. On the other hand, they tend to deviate from the GGA results as the adsorption distance becomes smaller, where back donation from the metal surface to the adsorbate occurs. Our analysis reveals that at experimentally reported metal–organic distance, back donation is significant enough to induce polarization of pentacene molecules perpendicular to the surface, which leads to a reduction of the work function. Thus, at the experimentally reported metal–organic distance, the work function change estimated by a simple IDIS model deviates from that calculated by self-consistent GGA calculations. We also found that at the experimentally reported metal–organic distance, the transferred electrons create weak chemical bonds between pentacene and the Cu(1 1 1) surface, illustrating the reactive nature of pentacene.