Mesoporous micelle templated silica with incorporated C<Subscript>8</Subscript> and C<Subscript>18</Subscript> phase

Mesoporous silica material of MCM-41 type was synthesized by co-condensation of highly concentrated octyltriethoxysilane (OTEOS), octadecyltriethoxysilane (ODTEOS) and tetraethoxysilane (TEOS). The obtained hybrid materials were characterized using XRD, TG-DSC and low temperature adsorption/desorption of nitrogen. It was shown that the applied method of synthesis allows to obtain silica of MCM-41 type with a high degree of hydrocarbon saturation.     

The enthalpy of formation of fullerene fluoride C<Subscript>60</Subscript>F<Subscript>18</Subscript> and the C-F bond energy

The enthalpy of combustion of crystalline fullerene fluoride C₆₀F₁₈ was determined in an isoperibolic calorimeter with a rotating platinized bomb, and the enthalpy of formation of the compound was calculated. The enthalpy of sublimation of C₆₀F₁₈ measured earlier was used to calculate the enthalpy of formation of fullerene fluoride in the gas phase and the mean enthalpy of dissociation of C-F bonds in this compound.     

Benzene Adsorption on C<Subscript>24</Subscript>, Si@C<Subscript>24</Subscript>, Si-Doped C<Subscript>24</Subscript>, and C<Subscript>20</Subscript> Fullerenes

The absorption feasibility of benzene molecule in the C₂₄, Si@C₂₄, Si-doped C₂₄, and C₂₀ fullerenes has been studied based on calculated electronic properties of these fullerenes using Density functional Theory (DFT). It is found that energy of benzene adsorption on C₂₄, Si@C₂₄, and Si-doped C₂₄ fullerenes were in range of –2.93 and –51.19 kJ/mol with little changes in their electronic structure. The results demonstrated that the C₂₄, Si@C₂₄, and Si-doped C₂₄ fullerenes cannot be employed as a chemical adsorbent or sensor for benzene. Silicon doping cannot significantly modify both the electronic properties and benzene adsorption energy of C₂₄ fullerene. On the other hand, C₂₀ fullerene exhibits a high sensitivity, so that the energy gap of the fullerene is changed almost 89.19% after the adsorption process. We concluded that the C₂₀ fullerene can be employed as a reliable material for benzene detection.     

Copolymerization of styrene and 1-hexene with a TiCl<Subscript>4</Subscript>-Al(C<Subscript>6</Subscript>H<Subscript>13</Subscript>)<Subscript>3</Subscript> · Mg(C<Subscript>6</Subscript>H<Subscript>13</Subscript>)<Subscript>2</Subscript> catalytic system

The copolymerization of styrene and 1-hexene with the TiCl₄-Al(C₆H₁₃)₃ · Mg(C₆H₁₃)₂ catalytic system has been investigated. The microstructure of polymer chains, molecular-mass characteristics, and thermophysical properties of the resulting copolymers have been studied. These copolymers contain 15 to 65 mol % styrene and mostly consist of isotactic polystyrene and poly(1-hexene) blocks.     

Relative Raman Intensities in C<Subscript>6</Subscript>H<Subscript>6</Subscript>, C<Subscript>6</Subscript>D<Subscript>6</Subscript>, and C<Subscript>6</Subscript>F<Subscript>6</Subscript>: A Comparison of Different Computational Methods

The accuracy of various computational methods (Hartree–Fock, MP2, CCSD, CAS-SCF, and several types of DFT) for predicting relative intensities in Raman spectra for C₆H₆, C₆D₆, and C₆F₆ was compared. The predicted relative intensities for ν₁ and ν₂ were compared with relative intensities measured by an FT-Raman spectrometer. While none of these methods excelled at this prediction, Hartree–Fock with a large basis set was most successful for C₆H₆ and C₆D₆, while PW91PW91 was the most successful for C₆F₆.     

Sorption of light fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript> on NORIT-AZO carbon

Sorption of fullerenes C₆₀ and C₇₀ from o-xylene, toluene, and dichlorobenzene solutions on NORIT-AZO carbons was studied.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 10, 2004, pp. 1638–1642.Original Russian Text Copyright © 2004 by Semenov, Seregin, Arapov, Charykov.     

Synthesis and structure of allylated derivatives of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript>

New chromatographically pure monoand hexamethanofullerenes C₆₀ and C₇₀ containing active allylic groups were synthesized by Bingel—Hirsch reaction. These compounds are promising for the studies of biological activity, as well as for obtaining on their basis new fullerenecontaining materials. The purity and composition of the synthesized compounds were confirmed by MALDI-TOF mass spectrometry and HPLC, their structure was established by ¹H and ¹³C NMR spectroscopy and X-ray diffraction.     

The saturated hydrides of C<Subscript>60</Subscript>:F<Subscript>5</Subscript>F<Subscript>6</Subscript> PK F<Subscript>5</Subscript>F<Subscript>7</Subscript> isomers

The carbon cages composed of pentagons and heptagons (F₅F₇ isomers) are the analogs of fullerenes composed of pentagons and hexagons (F₅F₆ isomers). To provide insight into the structures and stability of the hydrides of F₅F₆ and F₅F₇ isomers, systematical density functional theory calculations are performed on all the 1,812 F₅F₆–C₆₀H₆₀ and 56 F₅F₇–C₆₀H₆₀. The calculated results demonstrate that the isomer with lowest/highest energy has most/fewest fused pentagons for both F₅F₆ and F₅F₇ hydrides and the stability of these hydrides increase with the number of fused pentagons roughly. The lowest energy F₅F₆–C₆₀H₆₀ and F₅F₇–C₆₀H₆₀ are 237.1 and 152.5 kcal/mol lower in energy than the isolated pentagon rule (IPR) C₆₀H₆₀, respectively; however, these two parent cages are 529.6 and 660.0 kcal/mol higher in energy than the IPR C₆₀. The calculations suggest that heptagon-containing cages, not only those violating the IPR can be the candidate cages for fullerene derivatives and the possible repulsion between the added atoms may play an important role in determining the structures and stability of the hydrides of carbon cages.     

Mass spectrometric determination of the electron affinity of C<Subscript>60</Subscript>(CF<Subscript>3</Subscript>)<Subscript>10</Subscript> and C<Subscript>60</Subscript>(CF<Subscript>3</Subscript>)<Subscript>12</Subscript> molecules

Knudsen cell mass spectrometry was used to study ion-molecular electron exchange reactions between some trifluoromethyl derivatives of C₆₀ fullerene. Electron affinity values were experimentally determined for C₆₀(CF₃)₁₀ and the S ₆ isomer of C₆₀(CF₃)₁₂ and compared with the results of calculations and the data in the literature.     

Synthesis and EPR investigation of nitroxyl derivatives of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript>

Nitroxide derivatives of C₆₀ and C₇₀ were obtained by [3+2] cycloaddition of 4-(4-azidophenyl)-2,2,5,5-tetramethyl-3-oxy-2,5-dihydroimidazol-1-oxyl to fullerenes. The products were isolated by TLC and studied by EPR and optical spectroscopy. Molecular rotation of the adducts was shown to slow down on successive addition of the nitroxides, rotational correlation times depending nearly linearly on the number of the nitroxides added. Investigation of photochemical stability of nitroxide derivatives of C₆₀ and C₇₀ in benzene-ethanol medium reveal that the dissolved oxygen quenches efficiently the excitation of nitroxide (λ = 250–400 nm). In the absence of oxygen photoexcitation converts nitroxides to diamagnetic products, presumably, hydroxylamines formed through the interaction with the solvent.     

Electronic spectra of C<Subscript>6</Subscript>H<Superscript>+</Superscript> and C<Subscript>6</Subscript>H<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> in the gas phase

Measurement of the ³Π-³Π transition of C₆H⁺ in the gas phase near 19486 cm⁻¹ is reported. The experiment was carried out with a supersonic slit-jet expansion discharge using cavity ringdown absorption spectroscopy. Partly resolved P lines and observation of band heads permitted a rotational contour fit. Spectroscopic constants in the ground and excited-state were determined. The density of ions being sampled is merely 2×10⁸ cm⁻³. Broadening of the spectral lines indicates the excited-state lifetime to be ≈100 ps. The electronic transition of HC₆H₂⁺ at 26402 cm⁻¹ assumed to be ¹A₁-X¹A₁ in C_2v symmetry could not be rotationally resolved.     

A Quantum Chemical Study of C<Subscript>60</Subscript>Cl<Subscript>30</Subscript>, C<Subscript>60</Subscript>(OH)<Subscript>30</Subscript> Molecules and Fe@C<Subscript>60</Subscript>(OH)<Subscript>30</Subscript> Endocomplex

(U)PBE0/cc-pVDZ method is used to study the structure of C₆₀Cl₃₀, C₆₀(OH)₃₀ molecules and Fe@C₆₀(OH)₃₀ endocomplex. The triplet state of the endocomplex is shown to be the lowest in energy among its four states corresponding to different spin multiplicities and positions of Fe nucleus within the fullerene cavity. This state is characterized by bonding between the iron atom and one of two benzenoid cycles of the carbon cage, six internuclear Fe–C distances (208 pm), and 1s²2s²2p⁶3s²3p⁶3d^7.24s^0.14p^0.3 electron configuration of iron with spin population of 2.36.     

Circular dichroism of optically active organometallic derivatives of fullerenes C<Subscript>60</Subscript> and C<Subscript>70</Subscript>

Palladium and platinum complexes of fulleienes C₆₀ and C₇₀ containing the axially chiral ligand (—)-BITIANP (BITIANP is 2,2’-bis(diphenylphosphino)-3,3’-bi(benzo[b]thiophene)) and pynolidino[60]fullerene bearing a planar chiral organometallic π-complex substituent in the heteiocyclic ring were studied by circular dichroism (CD) spectroscopy.     

Thermokinetics on the reaction of formation of Dy[(C<Subscript>5</Subscript>H<Subscript>8</Subscript>NS<Subscript>2</Subscript>)<Subscript>3</Subscript>(C<Subscript>12</Subscript>H<Subscript>8</Subscript>N<Subscript>2</Subscript>)]

The enthalpy change of formation of the reaction of hydrous dysprosium chloride with ammonium pyrrolidinedithiocarbamate (APDC) and 1,10-phenanthroline (o-phen?H₂O) in absolute ethanol at 298.15 K has been determined as (-16.12 ± 0.05) kJ?mol^-1 by a microcalormeter. Thermodynamic parameters (the activation enthalpy, the activation entropy and the activation free energy), rate constant and kinetics parameters (the apparent activation energy, the pre-exponential constant and the reaction order) of the reaction have also been calculated. The enthalpy change of the solid-phase reaction at 298.15 K has been obtained as (53.59 ± 0.29) kJ?mol^t-1 by a thermochemistry cycle. The values of the enthalpy change of formation both in liquid-phase and solid-phase reaction indicated that the complex could only be synthesized in liquid-phase reaction.     

Features of the oxidation of C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerites as studied by IR spectroscopy

Features of the oxidation of C₆₀ and C₇₀ fullerites were studied by infrared spectroscopy. It was shown that for C₆₀ fullerite, the presence of toluene residue reduces the temperature at which oxidation starts. The form of the toluene (solvate or nonsolvate) is not important. A low-frequency shift in the valence C-O-C vibrations of C₇₀ fullerene due to local steric strains was discovered.     

Theoretical study of the structure of the C<Subscript>60</Subscript>@C<Subscript>450</Subscript> nanoparticle and relative motion of the encapsulated C<Subscript>60</Subscript> molecule

The equilibrium state of the C₆₀@C₄₅₀ nanoparticle was studied. The compound was found to be stable during the encapsulation of C₆₀ tubelene. The motions of tubelene in the confinement potential field of a closed C₄₅₀ nanotube, namely, the translational motion along the tubule axis and the rotational motion were investigated in detail. It is predicted that there is a nanogyroscope inside C₄₅₀, rotating in the field of the C₆₀ capsule. Its quantized rotational states were calculated. The nanoparticle structure and energy were investigated by the tight binding method using modified parameters.     

Phenyl- and cyclopentylimino derivatization for double bond location in unsaturated C<Subscript>37</Subscript>-C<Subscript>40</Subscript> alkenones by GC-MS

A method for the identification of double bond locations in polyunsaturated long chain alkenones adapted to nanogram amounts as currently analyzed by gas chromatography coupled to mass spectrometry (GC-MS) has been developed. The method is based on interpretation of the electron impact mass spectra of the imino derivatives of the carbonyl groups using either cyclopentyl or phenyl substitutents. Other complementary derivatization methods such as elaidization and hydrogenation have also been used for structural characterization of these compounds. This application has led to the identification of a novel homologous series of di-, tri-, and tetraunsaturated ketones with carbon number chain lengths between 37 and 40 in coastal hypersaline sediments. The novel series identified shows a distribution in which the double bond position between different homologs is established by reference to the distance from the carbonyl group whereas the previously known alkenones were constituted by unsaturated homologs with double bonds located at defined distances of the terminal methyl. This difference points out to a dissimilar, but still unknown, biogenic precursor of these novel alkenones.     

Study on the cluster of floating dross before nucleating during hot-dipping process

At present, hot-dipping anticorrosion metalliccoating on the surface of steel base is the main methodto prevent atmospheric corrosion of steel. With thechange of atmospheric environment, the traditionalidea of hot-dipping pure Zn cladding already does not…     

Steric effects on the singlet-triplet energy gaps of five-membered ring R<Subscript>2</Subscript>C<Subscript>4</Subscript>H<Subscript>2</Subscript>M

Thermal internal energy gaps, ΔE _s−t; enthalpy gaps, ΔH _s−t; Gibbs free energy gaps, ΔD _s−t, between singlet (s) and triplet (t) states of R₂C₄H₂M (M = C, Si, and Ge) were calculated at B3LYP/6-311++G** level of theory. The ΔG _s−t of R₂C₄H₂C was increased in the order (in kcal/mol): R = −CH₃ (−10.51) > −H (−9.59) > i-Pr (−9.51) > t-Bu (−8.98). While, the ΔG _s−t of R₂C₄H₂Si and R₂C₄H₂Ge were increased in the order (in kcal/mol): −CH₃ (17.01) > i-Pr (15.30) > −H (15.26) > t-Bu (14.35) and -H (22.79) > −CH₃ (22.69) > i-Pr (21.66) > t-Bu (21.01), respectively.     

Synthesis of fullerene C<Subscript>60</Subscript> monoadducts. Cyclopropanation of C<Subscript>60</Subscript> with sulfonium ylides

3′H-Cyclopropa[1,9](C₆₀-I_h)[5,6]fullerene-3′-carboxylic acid can be synthesized in a good yield by cyclopropanation of fullerene C₆₀ with 2-(dimethyl-λ⁴-sulfanylidene)acetates provided that the ester residue is readily hydrolyzable in acid medium.