Ultrafast and Wideband All-Optical Processing Technologies Towards Flexible Photonic Networks

Recent progress in ultrafast and wideband all-optical processing technologies to realize flexible and transparent optical time-division multiplexing (OTDM)/wavelength-division multiplexing (WDM) photonic networks is reviewed covering ultrafast OTDM technologies handling more than 100 Gbit/s per wavelength channel and wideband WDM technologies handling more than 1000 wavelength channels over the 200 nm range.     

Routing and wavelength assignment in WDM networks with dynamic link weight assignment

We consider the routing and wavelength assignment problem on wavelength division multiplexing networks without wavelength conversion. When the physical network and required connections are given, routing and wavelength assignment (RWA) is the problem to select a suitable path and wavelength among the many possible choices for each connection such that no two paths using the same wavelength pass through the same link. In wavelength division multiplexing (WDM) optical networks, there is need to maximize the number of connections established and to minimize the blocking probability using limited resources. In this paper, we have proposed three dynamic link weight assignment strategies that change the link weight according to the traffic. The performance of the existing trend and the proposed strategies is shown in terms of blocking probability. The simulation results show that all the proposed strategies perform better than the existing trend.     

WDM网状网中动态域间流量疏导策略

对波分复用(Wavelength Division Multiplexing,WDM)网状网中的动态域间流量疏导问题进行了深入研究.在源路由模式下,提出了一种基于固定备选路由方式的动态域间流量疏导算法,并在其基础上提出了只考虑波长均衡和同时考虑波长均衡与业务均衡的改进方法.该算法可以有效地避免路由环,得到较低的阻塞率,节省全网的收发器数目和波长资源.仿真结果表明,这种算法可以有效地改善网络性能.     

Dynamically selective multiwavelength cross-connect based on fibre Bragg gratings and mechanical optical switches

A dynamically selective multiwavelength cross-connect for wavelength division multiplexed (WDM) networks based on fibre Bragg gratings (FBGs) and optical switches is reported. Dynamically single- or multi-channel cross-connect functionality can be realized according to control of the optical switches and the FBGs' arrangement. Bit-error-rate performance with negligible power penalty is achieved in a 2.5Gbs-1x3 WDM channels over 100km conventional single-mode fibre (SMF) network demonstration. The characteristics of low channel crosstalk, uniform channel loss, high scalability and cascadability, and low cost of this device could provide more reconfiguration flexibility and network survivability for WDM networks.     

Delay-constrained anycast routing problem in WDM networks with wavelength conversions

Anycast routing and wavelength assignment problem has been intensively studied in wavelength-division multiplexing (WDM) networks, however, real-time application where packets have explicit expiration deadlines is not taken into consideration. In a WDM network, each link is associated with limited wavelengths available for channel connections. Data transmission over one wavelength to another requires wavelength conversion, which causes a long delay of message transmission. When the network and the set of anycast routing requests are given, the delay-constrained wavelength conversions anycast routing (DWCAR) problem is to find a set of light-paths, one for each source, for anycasting message to one member of the anycast destination group. The objective is to find a minimum number of wavelength conversions with the constraint that the sum of delays along every path must not exceed a given delay-bound. In this paper, we present a Tabu-search based delay-constrained anycast routing algorithm (TSDA) to solve this NP-complete problem, and compare it to a simple K shortest path based anycast algorithm (KSPA). Simulation results show TSDA achieves an average 40–50% improvement in required wavelength conversions.     

Novel Strategies for Reducing FWM Using Modified Repeated Unequally Spaced Channel Allocation

Four-wave mixing (FWM) is a dominant nonlinear effect present in optical wavelength division multiplexing (WDM) networks employing dispersion-shifted fiber. The method of placing the carrier at unequally spaced frequencies to reduce the FWM effect in these networks is known. A modification to this method with periodic unequally spaced channel allocation repeated base unit structures has been suggested that leads to a much better bandwidth utilization with lesser number of FWM components. A figure of merit, defined as the ratio of decrease in number of FWM components generated to increase in bandwidth, has been used as a metric of performance.     

Determination of the optimum electrical bandwidth for spectral slicing

The implementation of wavelength division multiplexing (WDM) in communication access networks is dependent upon the availability of low cost optical sources. One possible alternative to lasers is to employ slices of a broadband optical source obtained via optical filters, which may be tuneable. This paper considers the behaviour of such a spectrally sliced optical transmission system as a function of the bandwidth of a realistic receiver electrical filter for the first time. The treatment includes distortion from optical fibre dispersion over several kilometres of fibre. The optimum ratio between the electrical bandwidth and the optical bit rate is found to be ~0.6 for a fifth-order Bessel filter     

Characterization of wavelength interleaving in radio-over-fiber systems employing WDM/SCM

A radio-over-fiber (RoF) distribution system incorporating both sub-carrier multiplexing and wavelength division multiplexing (WDM) technologies is presented. This signal is directly modulated onto three high-speed lasers. Bragg filters are employed at the receiver base station in order to both demultiplex the required optical channel, and ensure that the detected signal is single side band (in order to overcome dispersion limitations of the link). System spectral efficiency is optimised by wavelength interleaving. The channel spacing between the WDM channels is varied and the system performance for different values of channel spacing and spectral efficiencies is investigated. The results show that wavelength interleaving is a reliable technique that could be used to increase the spectral efficiency of RoF systems.     

Blocking probability analysis model for flexible spectrum optical networks

Compared to the traditional wavelength division multiplexing （WDM） optical networks with rigid and coarse granularities, flexible spectrum optical networks have high spectrum efficiency, which can support the service with various bandwidth requirements, such as sub and super channel. Among all network performance parameters, blocking probability is an important parameter for the performance evaluation and network planning in circuit~based optical networks including flexible spectrum optical networks. We propose an analytical method of blocking probability computation for flexible spectrum optical networks in this letter through mathematical analysis and theoretical derivation. Two blocking probability models are built respectively based on whether considering spectrum consecutiveness or not. Numerical results validate our proposed blocking probability models under different link capacity and traffic loads.     

Integrated Planar Waveguide Demultiplexers for High-Density WDM Applications

A review is presented of state-of-the-art optical planar waveguide demultiplexers (DEMUXes), that is, phasars (arrayed waveguide) and etched grating devices designed for high-density (narrow channel spacing) wavelength division multiplexing (WDM) systems. Their advantages and disadvantages are discussed in comparison with other techniques for demultiplexing WDM signals. The advances made in their performance are reviewed, and ultimate limitations, set by technological constraints, are proposed. Finally, a comparison is made of the advantages and disadvantages of etched grating as opposed to phasar planar waveguide DEMUXes.     

Performance Analysis of Duty-Cycle Division Multiplexing over Wavelength Division Multiplexing System

Abstract

Performance optimization of a duty-cycle division multiplexing system over 8- and 40-channel wavelength division multiplexing networks is reported in this article. The modified duty-cycle division multiplexing system with optical domain multiplexing using a dual-drive Mach–Zehnder modulator is simulated with two and three users per wavelength. Using conventional dispersion compensation, the 40 × 40-Gbps system with two and three users per channel can support 240 and 160 km of transmission distance, respectively. The dispersion management technique based on a chirped fiber Bragg grating is proposed for a 40 × 3 × 13.33-Gbps duty-cycle division multiplexing/wavelength division multiplexing system that allows double the transmission distance compared to conventional technique.     

Recent progress of integrated optics planar lightwave circuits

Planar lightwave circuits (PLCs) are waveguide devices that integrate fiber-matched optical waveguides on silicon or glass substrate to provide an efficient means of interaction for the guided-wave optical signals. PLCs provide various important and functional devices for optical wavelength division multiplexing (WDM), time division multiplexing (TDM) systems and subscriber networks. This paper reviews the recent progress and future prospects of PLC technologies including arrayed-waveguide grating multiplexers, optical add/drop multiplexers, programmable dispersion equalizers and hybrid optoelectronics integration technologies.     

A New 1×K Tunable Multi-wavelength Router and its Features

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｗａｖｅｌｅｎｇｔｈｒｏｕｔｅｒｓ (ＷＲｓ)ａｒｅｋｅｙｄｅｖｉｃｅｓｉｎｗａｖｅｌｅｎｇｔｈ ｒｏｕｔｉｎｇａｌｌ ｏｐｔｉｃａｌｎｅｔｗｏｒｋｓ.Ｒｅｃｅｎｔｌｙ ,ｒｅｓｅａｒｃｈｆｏｒｔｈｅＷＲｓｈａｓｂｅｅｎｏｎｅｏｆｈｏｔｓｐｏｔｓｉｎｗａｖｅｌｅｎｇｔｈｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ (ＷＤＭ )ｎｅｔｗｏｒｋｔｅｃｈｎｏｌｏｇｉｅｓ[1,2 ] .Ｂｙｄｉｆｆｅｒｅｎｔｒｏｕｔｉｎｇｐａｔｔｅｒｎｓ,ｔｈｅＷＲｓｃａｎｂｅｄｉｖｉｄｅｄｉｎｔｏｔｗｏｋｉｎｄ…     

A New 1×K Tunable Multi-wavelength Router and its Features

Tunable wavelength routers (TWRs) for multiple wavelength selection are key devices in dynamic wavelength-routing wavelength division multiplexing (WDM) networks. In this paper, by cascading conventional 2×2 TWRs, a new 1×K TWR is proposed for large-scale dynamic wavelength-routing WDM networks. When the cascading numbers are smaller, the 1×K TWR can be directly applied to networking WDM networks. When the cascading numbers are larger, the 1×K TWR can be carried out by the integrating method and be extensively used to networking various multi-wavelength optical networks by the way of “EDFA+TWR”. Though the cascading method proposed is based on the acousto-optic TWRs, it can be also applied to cascading other kinds of TWRs.     

Analysis of Doppler-effeet on satellite constellations with wavelength division multiplexing architectures

With the development of optical space communications, a global space-based optical backbone network is currently proposed by using broadband laser inter-satellite links (ISLs) which enable routing traffic through the space. Satellite optical networking techniques based on wavelength division multiplexing (WDM) ISLs can transit significantly high data rates signals. In this letter, a new function of wavelength excursion due to Doppler-effect is developed for the ISLs, considering the conception of pointing ahead mechanism. The characteristic of wavelength excursion induced by Doppler-effect is examined in one of low earth orbit (LEO) satellite constellation networks named the next-generation LEO system (NeLS) with WDM ISLs assumed, and the influence on its communications caused by wavelength excursion is analyzed.     

Wavelength assignment for all-to-all broadcast in WRMD WDM linear array and ring

This paper proposes a wavelength assignment method for all-to-all broadcast in wavelength reusable multi-carrier distributed (WRMD) wavelength division multiplexing (WDM) linear array and ring networks with wavelength reuse. An expression on the minimum number of wavelengths required to establish all-to-all broadcast is also derived for the networks. It is observed that one carrier regeneration per wavelength significantly reduces the number of wavelengths compared to that without carrier regeneration. The results also show that regenerating carriers more than once has little effect on the required number of wavelengths.     

WDM网中同频串扰的研究

串扰是波分复用(WDM)光网络中限制光交叉连接(OXC)节点容量的一个重要因素.本文分析了相干和非相干串扰对通过OXC节点的光信号的影响,给出了固定和最佳判决门限两种情况下的光功率恶化,并进行了仿真计算.结果表明相干串扰对系统的影响很大.与固定判决相比,采用最佳判决可以降低串扰影响.串扰引起的光功率恶化主要取决于复用波数M,而与输入光纤数N关系不大.为了减小串扰对网络的限制,可以在OXC节点内使用滤波器.     

Absolute polar duty cycle division multiplexing over wavelength division multiplexing system

The performance of absolute polar duty cycle division multiplexing (AP-DCDM) over wavelength division multiplexing (WDM) system is presented based on the simulation results. The AP-DCDM signal has narrower bandwidth than conventional time division multiplexing (TDM) signal, which makes its implementation in WDM system advantageous. In this paper, characteristics of AP-DCDM and TDM signals in WDM system are compared at the speed of 40 Gbit/s per channel, for the minimum allowed channel spacing and the chromatic dispersion tolerance. The results clearly show that AP-DCDM performs significantly better than TDM. By using AP-DCDM, 1.28 Tbit/s (32 × 40 Gbit/s) was successfully transmitted over 320 km standard single mode fiber. Spectral efficiency of 0.64 b/s/Hz was achieved by using 10 Gbit/s transmitters and receivers without polarization multiplexing.     

基于光注入Fabry-Perot半导体激光器实现同步全光分路时钟提取与波长转换

提出了一种利用Fabry-Perot（FP）半导体激光器同步提取波长转换的分路光时钟的新方法,并对该方法进行了数值模拟和实验验证.光注入半导体激光器会产生非线性单周期振荡特性,利用交叉增益调制效应及对单周期振荡的微波锁频效应,可从光时分复用信号中提取出波长转换的分路光时钟.采用一个FP半导体激光器作为全光分路时钟提取及波长转换器,数值模拟实现了从波长为1555 nm、速率为2×20 Gb/s的光时分复用信号中提取出波长转换为1550 nm、重复频率为20 GHz的分路光时钟,实验完成了从波长为155024 nm、重复频率为1236 GHz光脉冲信号中提取出相位噪声为-105 dBc/Hz的波长为154591 nm、重复频率618 GHz的分频光时钟.此外还详细研究了注入光功率、波长失谐、FP激光器偏置电流及纵模选择对光时钟提取的影响,实验结果和数值模拟结果符合.该方法在光时分复用混合波分复用通信系统中实现全光解复用及波长路由有着重要的应用价值. 关键词： 波长转换 时钟提取 光注入 非线性动力学