Effect of annealing temperature on the structural and optical properties of ZnO thin films prepared by sol–gel method

In this work, ZnO thin films were synthesized by sol–gel method on glass substrates followed by calcinations on different temperatures. The effect of annealing temperature on the structure and optical properties of the films was studied. The structural characteristics of the samples were analyzed by X-ray diffraction and atomic force microscope. The optical properties were studied by a UV-visible spectrophotometer. The results show that all the prepared ZnO thin films have a high preferential oriented c-axis orientation with compact hexagonal wurtzite structure. With the increasing annealing temperature (mse.ufl.edu), the intensity of (002) peak, particle size, surface RMS roughness, and absorbance of the ZnO thin films were increased as well. On the contrary, the transmittance and optical band gaps were decreased.     

Influence of post-deposition annealing on the structural and optical properties of ZnO thin films prepared by sol–gel and spin-coating method

Thin films of zinc oxide have been deposited onto (0001) sapphire substrate by sol–gel and spin-coating methods. The XRD pattern showed that the crystallinity of the annealed ZnO films had improved in comparison with that of the as-grown films. Photoluminescence spectra revealed a two-line structure, which is identified in terms of UV emission and defect-related emission. The emission intensity was found to be greatly dependent on heat treatment. Host phonons of ZnO and a shift of the _E2$E_2$ (high) peak from its position have been observed from Raman spectra. The surface morphologies of the film had been improved after annealing was observed from AFM images.     

Nanostructures and luminescence properties of porous ZnO thin films prepared by sol–gel process

ZnO thin films containing nano-sized pores were synthesized on solid substrates through a sol–gel process by accommodating cetyl-trimethyl-ammonium bromide (CTAB) as an organic template in the precursor solution. By X-ray diffraction the resultant ZnO films were found to possess ordered pore arrays forming lamellar structure with the spacing between two adjacent pores being ∼3.0 nm. Photoluminescence measurements indicated that the surfactants effectively passivated the surface defects of the ZnO films responsible for the green emission. Al doping was found to improve not only the lamellar structure of the pore arrays but also the near-band-gap emission intensity while the suppression effect of CTAB on the green emission remained undisturbed. With a proper control of doping level, the optical property as well as the structural integrity can be tailored to augment the potential of ZnO films for the optoelectronics and sensor applications.     

Electrical and optical properties of Sb-doped ZnO thin films synthesized by sol–gel method

Sb-doped ZnO thin films with different values of Sb content （from 0 to 1.1 at.%） are deposited by the sol-gel dip- coating method under different sol concentrations. The effects of Sb-doping content, sol concentration, and annealing ambient on the structural, optical, and electrical properties of ZnO films are investigated. The results of the X-ray diffraction and ultraviolet-visible spectroscopy （UV-VIS） spectrophotometer indicate that each of all the films retains the wurtzite ZnO structure and possesses a preferred orientation along the c axis, with high transmittance （〉 90%） in the visible range. The Hall effect measurements show that the vacuum annealed thin films synthesized in the sol concentration of 0.75 mol/L each have an adjustable n-type electrical conductivity by varying Sb-doping density, and the photoluminescence （PL） spectra revealed that the defect emission （around 450 nm） is predominant. However, the thin films prepared by the sol with a concentration of 0.25 mol/L, despite their poor conductivity, have priority in ultraviolet emission, and the PL peak position shows first a blue-shift and then a red-shift with the increase of the Sb doping content.     

Effect of calcination atmosphere on photoluminescence properties of nanocrystalline ZrO2 thin films prepared by sol–gel dip coating method

Highly transparent and homogeneous nanocrystalline ZrO₂ thin films were prepared by the sol–gel dip coating method. The X-ray diffraction (XRD) pattern of ZrO₂ thin films calcined in air, O₂ or N₂ shows the formation of tetragonal phase with varying crystallite size. X-ray photoelectron spectroscopy (XPS) gives Zr 3d and O 1s spectra of thin film annealed in air, which reveal zirconium suboxide component (ZrO_x, 0<x<2), Zr–O bond and surface defects. An average transmittance greater than 85% (in UV–vis region) is observed in all calcined samples. Photoluminescence (PL) reveals an intense emission peak at 379 nm and weak peaks at 294, 586 and 754 nm for ZrO₂ film calcined in air. An enhancement of PL intensity and red-shift is observed in films calcined in O₂ and N₂ atmosphere. This is due to the reconstruction of zirconium nanocrystal interfaces and vacancies, which help passivate the non-radiative defects. The oxygen deficient defect, which is due to the distorted Zr–O bond, is suggested to be responsible for photoluminescence. The defect states in the nanocrystalline zirconia thin films play an important role in the energy transfer process. The luminescence defects in the film make it suitable for gas sensors development and tunable lasers.     

Effect of annealing temperature on nanocrystalline TiO2 thin films prepared by sol–gel dip coating method

Nanocrystalline TiO₂ thin films have been prepared by sol–gel dip coating method. X-ray diffraction results showed the formation of anatase phase TiO₂ with grain size in the range of 18–26 nm. The HRTEM studies show that the average particle size of TiO₂ is 24 nm. The EDX analysis confirmed that Ti and O elements are present in the samples. The optical absorption spectra reveal that the absorption edge shifts towards longer wavelength side with increase in annealing temperature.     

Photoluminescence studies of ZnO thin films on R-plane sapphire substrates grown by sol–gel method

Zinc oxide (ZnO) thin films on R-plane sapphire substrates were grown by the sol–gel spin-coating method. The optical properties of the ZnO thin films were investigated using photoluminescence. In the UV range, the asymmetric near-band-edge emission was observed at 300 K, which consisted of two emissions at 3.338 and 3.279 eV. Eight peaks at 3.418, 3.402, 3.360, 3.288, 3.216, 3.145, 3.074, and 3.004 eV, which respectively correspond to the free exciton (FX), bound exciton, transverse optical (TO) phonon replica of FX recombination, and first-order longitudinal optical phonon replica of FX and the TO (1LO+TO), 2LO+TO, 3LO+TO, 4LO+TO, and 5LO+TO, were obtained at 12 K. From the temperature-dependent PL, it was found that the emission peaks at 3.338 and 3.279 eV corresponded to the FX and TO, respectively. The activation energy of the FX and TO emission peaks was found to be about 39.3 and 28.9 meV, respectively. The values of the fitting parameters of Varshni's empirical equation were α=4×10^?3 eV/K and β=4.9×10³ K, and the S factor of the ZnO thin films was 0.658. With increasing temperature, the exciton radiative lifetime of the FX and TO emissions increased. The temperature-dependent variation of the exciton radiative lifetime for the TO emission was slightly higher than that for the FX emission.     

Study of NiCuZn ferrite powders and films prepared by sol gel method

This paper reports that a series of NiCuZn ferrite powders and films are prepared by using sol-gel method.The effects of raw material composition and the calcinate temperature on magnetic properties of them are investigated.The NiCuZn ferrite powders are prepared by the self-propagating high-temperature synthesis method and subsequently heated at 700 C～1000 C.The results show that NiCuZn ferrite powders with single spinel phase can be formed after heat-treating at 750 C.Powders obtained from Ni 0.4 Cu 0.2 Zn 0.4 Fe 1.9 O 4 gel have better magnetic properties than those from gels with other composition.After heat-treating at 900 C for 3 h,coercivity H c and saturation magnetization M s are 9.7 Oe (1 Oe=80 A/m) and 72.4 emu/g,respectively.Different from the powders,NiCuZn films produced on Si (100) from the Ni 0.4 Cu 0.2 Zn 0.4 Fe 2 O 4 gel formed at room temperature possess high properties.When heat-treating condition is around 600 C for 6 min,samples with low H c and high M s will be obtained.The minimal H c is 16.7 Oe and M s is about 300 emu/cm 3.In comparison with the films prepared through long-time heat treating,the films prepared through short heat-treating time exhibits better soft magnetic properties.     

Synthesis and characterization of nanostructured strontium hexaferrite thin films by the sol–gel method

Nanostructured single phase strontium hexaferrite, SrFe₁₂O₁₉, thin films have been synthesized on the (100) silicon substrate using a spin coating sol–gel process. The thin films with various Fe/Sr molar ratios of 8–12 were calcined at different temperatures from 500 to 900 °C. The composition, microstructure and magnetic properties of the SrFe₁₂O₁₉ thin films were characterized using Fourier transform infrared spectroscopy, differential thermal analysis, thermogravimetry, X-ray diffraction, electron microscopy and vibrating sample magnetometer. The results showed that the optimum molar ratio for Fe/Sr was 10 at which the lowest calcination temperature to obtain the single phase strontium hexaferrite thin film was 800 °C. The magnetic measurements revealed that the sample with Fe/Sr molar ratio of 10, exhibited higher saturation magnetization (267.5 emu/cm³) and coercivity (4290 Oe) in comparison with those synthesized under other Fe/Sr molar ratios.     

Fabrication and characterization of pure and Sn/Sb-doped ZnO thin films deposited by sol–gel method

Undoped and doped ZnO thin films were prepared by sol–gel method and deposited on tin-doped indium oxides (ITO) substrate using spin coating technique. The effects of Sn and Sb dopants on structural and optical properties were investigated. The starting material was zinc acetate dihydrate, 2-methoxyethanol was used as solvent and monoethanolamine (MEA) as stabilizer. ZnO films were doped with 2% and 7% Sn and Sb concentrations. Optical measurements show an important effect of Sn and Sb dopants on optical band gap.     

Fabrication and characterization of nanocrystalline Al,Co:ZnO thin films by a sol–gel dip coating

The consequence of annealing on the micro-structural and electrochemical characteristics of Al doped CoZnO thin films deposited by sol–gel dip coating technique are studied. X-ray diffraction indicates that films have a hexagonal wurtzite structure oriented towards the (100). Optical properties of films are recorded by transmission curves utilising a UV–VIS spectrophotometer. The investigation of the optical transmission spectra indicates that the band gap of the films decrease from 3.99 eV to minimum 3.83 eV upon annealing. All films show room temperature ferromagnetism whose magnetization increases with annealing. Dip coated films possess polycrystalline nanosized grains with porous morphology.     

Influence of acid catalysts on the structural and magnetic properties of nanocrystalline barium ferrite prepared by sol–gel method

BaFe₁₂O₁₉ powders with nanocrystalline size were prepared by sol–gel techniques. Nitric, hydrochloric, acetic and stearic acid were used to improve the magnetic properties. Amorphous gels were formed with Fe/Ba molar ratio of 10.5. Then powders were obtained by subsequent heat treatment at 800–1000 °C for 1 h. Barium ferrite powder was also synthesized by solid state reaction at 1210 °C. X-ray diffraction, scanning electron microscopy and transmission electron microscopy (TEM) experiments were conducted to evaluate structural properties of the samples. The value of the effective magnetic susceptibility was measured. The results show that the magnetoplumbite structure was formed in all of the powders. The TEM observation showed that the minimum particle size (20 nm) was produced with the stearic acid catalyst. The highest value of the effective magnetic susceptibility was achieved also using stearic acid.     

Photoconductivity studies on nanoporous TiO2/dopamine films prepared by sol–gel method

Dopamine was encapsulated into nanoporous amorphous TiO₂ matrix by sol–gel method under atmospheric conditions. A second sample was obtained by the addition of the crown-ether 15C5 in this previous sample. Thin films were spin-coated on glass wafers. No heat treatment was employed in both films. All films were characterized using infrared spectroscopy, high resolution transmission electronic microscopy, X-ray diffraction, optical absorption and scanning electronic microscopy. Despite the films prepared with 15C5 were no calcined, a partial crystallization was identified. Anatase and rutile nanoparticles with sizes of 4–5 nm were obtained. Photoconductivity technique was used to determine the charge transport mechanism on these films. Experimental data were fitted with straight lines at darkness and under illumination wavelengths at 320, 400, and 515 nm. It indicates an ohmic behavior. Photovoltaic and photoconductivity parameters were determined from the current density vs. the applied-electrical-field results. Amorphous film has bigger photovoltaic and photoconductive parameters than the partially crystalline film. Results observed in the present investigation prove that the nanoporous TiO₂ matrix can protect the dopamine inhibiting its chemical instability. This fact modifies the optical, physical and electrical properties of the film, and is intensified when 15C5 is added.     

High quality nitrogen-doped zinc oxide thin films grown on ITO by sol–gel method

Highly transparent N-doped ZnO thin films were deposited on ITO coated corning glass substrate by sol–gel method. Ammonium nitrate was used as a dopant source of N with varying the doping concentration 0, 0.5, 1.0, 2.0 and 3.0 at%. The DSC analysis of prepared NZO sols is observed a phase transition at 150 °C. X-ray diffraction pattern showed the preferred (002) peak of ZnO, which was deteriorated with increased N concentrations. The transmittance of NZO thin films was observed to be ~88%. The bandgap of NZO thin films increased from 3.28 to 3.70 eV with increased N concentration from 0 to 3 at%. The maximum carrier concentration 8.36×10¹⁷ cm⁻³ and minimum resistivity 1.64 Ω cm was observed for 3 at% N doped ZnO thin films deposited on glass substrate. These highly transparent ZnO thin films can be used as a window layer in solar cells and optoelectronic devices.     

Influence of Ag doping on structural and optical properties of ZnO thin films synthesized by the sol–gel technique

Thin films of Ag–ZnO samples deposited on glass substrates with a different percentage of Ag content (1, 2, and 3 at%) were synthesized, at room temperature, by a dip-coating sol-gel method. The obtained samples are hexagonal wurtzite structure. The average grain size of deposits is about 5 nm. Up to 3 at%, c-axis lattice parameter shifts toward a higher value, which indicates that silver atoms replace Zn atoms in the crystal lattice. As shown by the DRX spectra, growth rate in the (101) direction is favored by the presence of silver ions in the ZnO. The layers present a homogeneous crystallites distribution, as we can remark it on SEM micrographs and exhibit a very low roughness according to AFM images. The entire samples exhibit a transmission value greater than 80 %, in the visible region, while the maximum is obtained for those doped at 2 at%. Energy band varies between 3.15 eV and 3.25 eV. The wider gap obtained is that of the ZnO layer doped with 2 at%. It is worth noting a strong UV emission observed on PL spectrum, performed at very low temperature (liquid nitrogen temperature), for silver doped ZnO compared to that of pure ZnO.     

The effect of Mg doping on the dielectric and tunable properties of Pb0.3Sr0.7TiO3 thin films prepared by sol–gel method

Mg doped Pb_0.3Sr_0.7TiO₃ (PST) thin films were fabricated by the sol–gel method on a Pt/Ti/SiO₂/Si substrate. The microstructure, surface morphology, dielectric and tunable properties of PST thin films were investigated as a function of Mg concentration. It is found that proper Mg doping dramatically improves the dielectric loss (0.0088 @ 1 MHz), furthermore, the crystallinity, dielectric constant, and tunability of films simultaneously decrease with the increase of Mg content. The 2 mol% Mg doped PST thin film shows the highest figure of merit (FOM) value of 36.8 for its the smallest dielectric loss and upper tunability. The dependence of Rayleigh coefficient on the doping concentration was examined, which indicated that the reduction of dielectric constant and tunability of films should be related to the $\mathrm{Mg}''_{\mathrm{Ti}}$ – $\mathrm{V}_{\mathrm{O}}^{\bullet\bullet}$ defect dipoles pinning the domain wall motion of residual polar clusters in PST.     

Effect of preheating temperatures on microstructure and optical properties of Na-doped ZnO thin films by sol–gel process

The chemical composition, crystalline structure, surface morphology and photoluminescence spectra of Na-doped ZnO thin films with different heat treatment process were investigated by X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy and a fluorescence spectrometer. The results show that preferred orientation, residual stress, average crystal size and surface morphology of the thin films are strongly determined by the preheating temperature. The effects of preheating temperature on microstructure and surface morphology have been discussed in detail. The photoluminescence spectra show that there are strong violet & UV emission, blue emission and green emission bands. The violet & UV emission is ascribed to the electron transition from the localized level below the conduction band to the valence band. The blue emission is attributed to the electron transition from the shallow donor level of oxygen vacancies to the valence band, and the electron transition from the shallow donor level of interstitial zinc to the valence band. The green emission is assigned to the electron transition from the level of ionized oxygen vacancies to the valence band.