Room temperature sphere-to-rod growth and gelation of PEO-PPO-PEO triblock copolymers in aqueous salt solutions

The effects of NaCl and KF on the sphere-to-rod micellar growth behavior of triblock copolymers having two different compositions, (EO)20(PO)70(EO)20 (P123) and (EO)26(PO)40(EO)26 (P85), have been studied by dynamic light scattering (DLS), small angle neutron scattering (SANS) and dilute solution viscometry. NaCl can effectively tune the sphere-to-rod growth temperature of the micelles of both these copolymers and induce micellar growth down to the room temperature and below. The growth behavior is found to be dependent on the composition of the copolymer as P123 being more hydrophobic shows the room temperature growth in the presence of ethanol at significantly lesser NaCl concentration than the less hydrophobic copolymer P85. DLS studies depict for the first time the growth driven transition of the copolymer solutions from dilute to semi-dilute regime as a function of copolymer and salt concentrations. KF can also induce room temperature growth of the P123 micelles at lesser salt concentration than NaCl but it fails to induce any such growth of the P85 micelles. A pseudo-binary temperature-concentration phase diagram on 15% copolymer solutions shows the variation of the sphere-to-rod transition temperature and the cloud point of the copolymer solutions as a function of salt concentration.     

Effect of phenol on the aggregation characteristics of an ethylene oxide-propylene oxide triblock copolymer P65 in aqueous solution

The effects of phenol on the micellization, micellar growth, and phase separation of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic P65: EO19 PO30 EO19) in aqueous solution have been studied by cloud point, viscosity, dynamic light scattering (DLS), differential scanning calorimetry (DSC), fluorescence spectroscopy, and small-angle neutron scattering (SANS). Various concentrations of P65 have been chosen to estimate the effect of phenol on different concentration regions of P65. Phenol interacts quite differently at low concentrations (0-2%) than at high concentrations (2-10%) of P65, as per the observation that phenol is more predominant at smaller concentrations of P65. A marked decrease in the cloud points of the P65 solutions is observed in presence of phenol. The critical micelle temperature (CMT) of P65 shows a synergistic effect of phenol on P65 aggregates. Micellar transitions, phase separation, and aggregation behaviours like micellization and micellar growth in the presence of phenol have been observed by combining viscometry, DLS, DSC, and CP. DLS shows that the effect of phenol is predominant at high temperatures. SANS shows a high increase in axial ratio and aggregation numbers in the presence of phenol at fixed concentrations of P65. Fluorescence data illustrate that addition of phenol makes micelles polar but at the same time its favours aggregation. Water-soluble phenol (present in low concentrations) forms aggregates with P65, which can be separated by cloud point extraction, making this study interesting for separation of phenol from the phenol-water system.     

Effect of SDS on the self-assembly behavior of the PEO-PPO-PEO triblock copolymer (EO)20(PO)70(EO)20

The mixed micellar system comprising the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)-based triblock copolymer (EO)(20)(PO)(70)(EO)(20) (P123) and the anionic surfactant sodium dodecyl sulfate (SDS) has been investigated in aqueous media by small-angle neutron scattering (SANS) and viscosity measurements. The aggregation number of the copolymer in the micelles decreases upon addition of SDS, but a simultaneous enhancement in the degree of micellar hydration leads to a significant increase in the micellar volume fraction at a fixed copolymer concentration. This enhancement in the micellar hydration leads to a marked increase in the stability of the micellar gel phase until it is destroyed at very high SDS concentration. Mixed micellar systems with low and intermediate SDS concentrations form the micellar gel phase in much wider temperature and copolymer concentration ranges than the pure copolymer micellar solution. A comparison of the observed results with those for the copolymers (EO)(26)(PO)(40)(EO)(26) (P85) and (EO)(99)(PO)(70)(EO)(99) (F127) suggests that the composition of the copolymers plays a significant role in determining the influence of SDS on the gelation characteristics of the aqueous copolymer solutions. Copolymers with high PO/EO ratios show an enhancement in the stability of the gel phase, whereas copolymers with low PO/EO ratios show a deterioration of the same in the presence of SDS.     

Effect of ionic liquids on the aggregation behavior of PEO-PPO-PEO block copolymers in aqueous solution

Effect of 1-butyl-3-methyl-imidazolium bromide (BmimBr) on the aggregation behavior of PEO-PPO-PEO Pluronic P104 aqueous solution was studied by Fourier transform infrared (FTIR) spectroscopy, freeze fracture transmission electron microscopy (FF-TEM), dynamic light scattering (DLS), and NMR spectroscopy. When the BmimBr concentration was below 1.232 mol/L, the critical micelle temperature (CMT) of Pluronic P104 remained constant, while the size of micelles increased with increasing the BmimBr concentration; above this concentration, the CMT of Pluronic P104 decreased abruptly, and bigger clusters of BmimBr were formed. The selective nuclear Overhauser effect (NOE) spectrum indicates that the PO block of the P104 interacts with the butyl group of the Bmim+ cation by hydrophobic interaction. It suggests that when the concentration of BmimBr is below 1.232 mol/L, there are P104 micelles in the aqueous solution with BmimBr embedding to the micellar core, while above this concentration, P104 micelles and BmimBr clusters coexist in the system.     

Sodium chloride and ethanol induced sphere to rod transition of triblock copolymer micelles

Dynamic light scattering (DLS), small-angle neutron scattering (SANS), and viscosity studies have been carried out to examine the influence of NaCl and ethanol on the structure of triblock copolymer [(EO)20(PO)70(EO)20] (EO = ethylene oxide; PO = propylene oxide) micelles in aqueous medium. The studies show that while the pure triblock copolymer solutions do not show any significant growth of the micelles on approaching the cloud point, the presence of a small amount of ethanol (5-10%) induces a sphere to rod shape transition of micelles at high temperatures. Interestingly, this ethanol induced sphere to rod transition of micelles can be brought down to room temperature (25 degrees C) with the addition of NaCl. It is also found that NaCl alone cannot induce such sphere to rod transitions and excess ethanol suppresses them by increasing their transition temperature.     

Phase behavior of a mixture of poly(isoprene)-poly(oxyethylene) diblock copolymer and poly(oxyethylene) surfactant in water

The phase behavior of a mixture of poly(isoprene)-poly(oxyethylene) diblock copolymer (PI-PEO or C250EO70) and poly(oxyethylene) surfactant (C12EO3, C12EO5, C12EO6, C12EO7, and C12EO9) in water was investigated by phase study, small-angle X-ray scattering, and dynamic light scattering (DLS). The copolymer is not soluble in surfactant micellar cubic (I1), hexagonal (H1), and lamellar (Lalpha) liquid crystals, whereas an isotropic copolymer fluid phase coexists with these liquid crystals. Although the PI-PEO is relatively lipophilic, it increases the cloud temperatures of C12EO3-9 aqueous solutions at a relatively high PI-PEO content in the mixture. Most probably, in the copolymer-rich region, PI-PEO and C12EOn form a spherical composite micelle in which surfactant molecules are located at the interface and the PI chains form an oil pool inside. In the C12EO5/ and C12EO6/PI-PEO systems, one kind of micelles is produced in the wide range of mixing fraction, although macroscopic phase separation was observed within a few days after the sample preparation. On the other hand, small surfactant micelles coexist with copolymer giant micelles in C12EO7/ and C12EO9/PI-PEO aqueous solutions in the surfactant-rich region. The micellar shape and size are calculated using simple geometrical relations and compared with DLS data. Consequently, a large PI-PEO molecule is not soluble in surfactant bilayers (Lalpha phase), infinitely long rod micelles (H1 phase), and spherical micelles (I1 phase or hydrophilic spherical micelles) as a result of the packing constraint of the large PI chain. However, the copolymer is soluble in surfactant rod micelles (C12EO5 and C12EO6) because a rod-sphere transition of the surfactant micelles takes place and the long PI chains are incorporated inside the large spherical micelles.     

Tuning the structure of SDS micelles by substituted anilinium ions

The growth behavior of aggregates formed in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) in the presence of the cationic hydrophobic salts o-toluidine hydrochloride (OTHC) and m-toluidine hydrochloride (MTHC) has been studied by dynamic light scattering (DLS) and small-angle neutron scattering (SANS) techniques. DLS studies indicate a progressive growth of SDS micelles with addition of less than equimolar concentrations of hydrophobic salts. A prolate ellipsoidal model is used to analyze the DLS data, which is further supported by SANS measurements. We explain the propensity for the strong growth of micelles in the presence of OTHC and MTHC by the high charge neutralization provided by these salts as the aromatic counterions are adsorbed on the surface of the micelles. When the substitution is at the meta position, i.e., for MTHC, micellar growth is favored at lower salt concentrations than for OTHC. The variation in growth behavior is explained in terms of the difference in the chemical environments of the substituents at the ortho and meta positions. Micellar parameters obtained from SANS data at elevated temperature also support enhanced growth of micelles in the presence of MTHC as compared to OTHC.     

Concentration, temperature, and salt-induced micellization of a triblock copolymer Pluronic L64 in aqueous media

The effect of copolymer concentration, temperature, and sodium halides (NaI, NaBr, NaCl, and NaF) on micellization and micellar properties of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic L64: EO13PO30EO13), was examined by different methods such as dye spectral change, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle neutron scattering (SANS), dynamic light scattering (DLS), viscosity, and cloud point (CP). Temperature/polymer concentration/salt dependent aggregation behavior of L64 was observed. The data on critical micelle concentration (CMC), critical micelle temperature (CMT), (CP), micelle size, and shape are reported. The Fourier transform infrared (FTIR) showed temperature dependent changes in C-O-C stretching variation band towards higher wave numbers and broadening of band width during the micellization process; this was attributed to increase in proportion of the anhydrous methyl groups, while the proportion of the hydrated methyl groups was decreased. Differential scanning calorimetry (DSC) provides CMTs and CPs from the same experiment. CMC values derived from dye spectral change, decrease significantly with the addition of salt. The increases in salt/copolymer concentration lower the onset temperature of micellization (CMT). Halide anions influence both CMT and CP in the order of F- > Cl- > Br- > I- when total salt and copolymer concentration kept constant. SANS results show the increase of inter-micellar interaction due to the increase in temperature/salt concentration; this is supported by viscosity data.     

Micellar Behavior of Polystyrene-Poly(Ethylene Oxide) Diblock Copolymers in Aqueous Media: Effect of Copolymer Composition,Temperature, Salt,and Surfactants

Formation and structure of micelles from two amphiphilic polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers (PS mol.wt. 1000; PEO mol.wt. 3000 and 5000) were examined by surface tension, viscosity, steady state fluorescence, dynamic light scattering (DLS), small angle neutron scattering (SANS), and cryo-transmission electron microscopy (cryo-TEM). The critical micelle concentration (CMC) of the copolymers in aqueous solution was ca. 0.05%; micelle hydrodynamic diameter was 30–35 nm with a narrow size distribution. SANS studies show that the copolymers form ellipsoidal micelles with semi major axis ～23 nm and semi minor axis ～8 nm. No significant change in the structure was found with temperature and presence of salt. The copolymer micelles interaction with the ionic surfactants sodium dodecyl sulphate (SDS) and dodecyltrimethylammonium bromide (DTAB) was also examined by DLS and SANS.     

The Effects of Salts and Ionic Surfactants on the Micellar Structure of Tri‐Block Copolymer PEO‐PPO‐PEO in Aqueous Solution

The micelles of two poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) block copolymers, P123 and F127 (same mol wt of PPO but different % PEO) in aqueous solution in the absence and presence of salts as well as ionic surfactants were mainly examined by dynamic light scattering (DLS). The study is further supported by cloud point and viscosity measurements. The change in cloud point (CP), as well as the size of micelles in aqueous solution in presence of salts obeys the Hofmeister lyotropic series. Addition of both cationic cetylpyridinium chloride (CPC) and anionic sodium dodecylsulfate (SDS) surfactants in the aqueous solution of P123 show initial decrease of micellar size from 20 nm to nearly 7 nm and then increasing with a double relaxation mode, further in the presence of NaCl this double relaxation mode vanishes. The effect of surfactant on F127, which has much bigger hydrophilic part is different than P123 and have no double relaxation. The relaxation time distributions is obtained using the Laplace inversion routine REPES. Two relaxation modes for P123 are explained on the bases of Pluronic rich mixed micelles containing ionic surfactants and the other smaller, predominantly surfactant rich micelles domains.     

Temperature and concentration effects on supramolecular aggregation and phase behavior for poly(propylene oxide)-b-poly(ethylene oxide)- b-poly(propylene oxide) copolymers of different composition in aqueous mixtures, 1

The phase behavior (temperature vs composition) and microstructure for the two binary systems Pluronic 25R4 [(PO)19(EO)33(PO)19]-water and Pluronic 25R2 [(PO)21(EO)14(PO)21]-water have been studied by a combined experimental approach in the whole concentration range and from 5 to 80 degrees C. The general phase behavior has been identified by inspection under polarized light. Precise phase boundaries have been determined by analyzing 2H NMR line shape. The identification and microstructural characterization of the liquid crystalline phases have been achieved using small-angle X-ray scattering (SAXS). The isotropic liquid solution phases have been investigated by self-diffusion measurements (PGSE-NMR method). 25R2 does not form liquid crystals and is miscible with water in the whole concentration range; with increasing temperature, the mixtures split into water-rich and a copolymer-rich solutions in equilibrium. 25R4 shows rich phase behavior, passing, with increasing copolymer concentration, from a water-rich solution to a lamellar and copolymer-rich solution. A small hexagonal phase, completely encircled in the stability region of the water-rich solution, is also present. In water-rich solutions, at low temperatures and low copolymer concentrations, the copolymers are dissolved as independent macromolecules. With increasing copolymer concentrations an interconnected network of micelles is formed in which micellar cores of hydrophobic poly(propylene oxide) are interconnected by poly(ethylene oxide) strands. In copolymer-rich solutions water is molecularly dissolved in the copolymer. The factors influencing the self-aggregation of Pluronic R copolymers (PPO-PEO-PPO sequence) are discussed, and their behavior in water is compared to that of Pluronic copolymers (PEO-PPO-PEO sequence).     

Mixed micelle behavior of Pluronic L64 and Triton X-100 with conventional and dimeric cationic surfactants

The mixed micellar properties of a triblock copolymer, Pluronic L64, (EO)13(PO)30(EO)13, and a nonionic surfactant, Triton X-100, in aqueous solution with conventional alkyl ammonium bromides and their dimeric homologues were investigated with the help of fluorescence and cloud point measurements. The composition of mixed micelles and the interaction parameter, beta, evaluated from the critical micelle concentration (cmc) data for different mixtures using Rubingh's and Motomura's theories are discussed. It has been observed that the mixed micelle formation between monomeric/dimeric alkyl ammonium bromides and L64 was due to synergistic interactions which increase with the increase in hydrophobicity of the cationic component. On the other hand, synergistic mixing was observed in the mixed micelles of Triton X-100 and monomeric cationic surfactants, the magnitude of which decreases slightly with the increase in hydrophobicity of the cationic component. Antagonistic interactions were observed in the case of Triton X-100 and dimeric cationic surfactants.     

A Fourier transform infrared study of the phase transition in aqueous solutions of Ethylene oxide–propylene oxide triblock copolymer

The phase transition between unimer and micellar phases of poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (PEO–PPO–PEO) triblock copolymer Pluronic P105 in aqueous solution has been investigated as a function of temperature using Fourier transform infrared spectroscopy. The transition of 8 wt% Pluronic P105 in aqueous solution was found to occur at 25 °C. As temperature increases, PO blocks appear to be stretched conformers with strong interchain interaction, and the formation of a hydrophobic core in the micellar phase. The EO chains are found to change to a more disordered structure with low-chain packing density from the unimer phase to the micellar phase. Both the EO and PO blocks exhibit dehydration during the phase transition. Received: 17 September 1998 Accepted in revised form: 10 December 1998     

Wormlike micelle formation and flow alignment of a pluronic block copolymer in aqueous solution

The self-assembly into wormlike micelles of a poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymer Pluronic P84 in aqueous salt solution (2 M NaCl) has been studied by rheology, small-angle X-ray and neutron scattering (SAXS/SANS), and light scattering. Measurements of the flow curves by controlled stress rheometry indicated phase separation under flow. SAXS on solutions subjected to capillary flow showed alignment of micelles at intermediate shear rates, although loss of alignment was observed for high shear rates. For dilute solutions, SAXS and static light scattering data on unaligned samples could be superposed over three decades in scattering vector, providing unique information on the wormlike micelle structure over several length scales. SANS data provided information on even shorter length scales, in particular, concerning "blob" scattering from the micelle corona. The data could be modeled based on a system of semiflexible self-avoiding cylinders with a circular cross-section, as described by the wormlike chain model with excluded volume interactions. The micelle structure was compared at two temperatures close to the cloud point (47 degrees C). The micellar radius was found not to vary with temperature in this region, although the contour length increased with increasing temperature, whereas the Kuhn length decreased. These variations result in an increase of the low-concentration radius of gyration with increasing temperature. This was consistent with dynamic light scattering results, and, applying theoretical results from the literature, this is in agreement with an increase in endcap energy due to changes in hydration of the poly(ethylene oxide) blocks as the temperature is increased.     

A phenol-induced structural transition in aqueous cetyltrimethylammonium bromide solution

The effect of phenol on the structure of micellar solution of a cationic surfactant, cetyltrimethylammonium bromide (CTAB) was investigated using viscosity, dynamic light scattering (DLS), small angle neutron scattering (SANS) and nuclear magnetic resonance (NMR) techniques. The relative viscosity and apparent hydrodynamic diameters of the micelles in CTAB solution increase initially and then decrease with addition of phenol. SANS studies indicate a prolate ellipsoidal structure of the micelles. The axial ratio of the prolate ellipsoidal micelles increases and then decreases with addition of phenol, consistently with DLS and viscosity measurements. NMR studies confirm the solubilization of phenol to the palisade layer and growth of the micelles at high concentration of phenol as revealed from the broadening of peaks.     

Viscoelastic wormlike micellar solutions made from nonionic surfactants: structural investigations by SANS and DLS

A highly viscoelastic micellar solution of nonionic surfactants in a dilute region was recently reported. A transient network of wormlike micelles formed with the addition of short-EO-chain poly(oxyethylene) dodecyl ether surfactants (C12EO(j), j = 1-4) to poly(oxyethylene) cholesteryl ethers (ChEO(m), m = 10 and 15). A gradual increase in micellar length with an increasing C12EO(j) concentration was assumed from the results of model calculations and rheological measurements. We report in this study the results of structural investigations with small-angle neutron scattering (SANS) to confirm this assumption. Tuning from spherical to wormlike and to locally flat structures can be achieved by way of three methods. One can either increase the C12EO(j) concentration or decrease j (smaller headgroup size) at a fixed concentration of C12EO(j). The third possibility is to increase the temperature at a fixed composition. All three methods result in the same structural transition. The formation of a transient network of wormlike micelles analogous to polymer solutions can be observed with dynamic light scattering (DLS). A stretched exponential approach was applied to fit the correlation functions.     

含铕荧光两亲接枝共聚物的制备及胶束化行为

以丙烯酸(AA)、 苯甲酸(BA)和邻菲啰啉(Phen)为配体, Eu³⁺为中心离子, 制备了可聚合荧光配合物单体, 并以此单体为功能单体, 聚乙二醇单甲醚甲基丙烯酸酯(MPEGMA)和甲基丙烯酸六氟丁酯(HFMA)为共聚单体, 通过溶液聚合制备出含铕两亲荧光接枝共聚物P-[HFMA-co-Eu(AA)(BA)₂Phen]g-PEG. 利用红外光谱(FTIR)和核磁共振波谱(¹H NMR和¹⁹F NMR)对共聚物的结构进行表征; 采用表面张力法测定共聚物的临界胶束浓度(cmc)为0.20 g/L; 通过透射电子显微镜(TEM)和动态光散射仪(DLS)观察胶束的形貌及其胶束化行为, 发现该共聚物可以形成大小均一的球形胶束, 且随着共聚物浓度的提高, 胶束粒径相应增大; 在溶液浓度达到临界胶束浓度时, 溶液荧光出现强度突变.     

Improved micellar hydration and gelation characteristics of PEO-PPO-PEO triblock copolymer solutions in the presence of LiCl

LiCl-induced changes in the micellar hydration and gelation characteristics of aqueous solutions of the two triblock copolymers F127 (EO(100)PO(70)EO(100)) and P123 (EO(20)PO(70)EO(20)) (where EO represents the ethylene oxide block and PO represents the propylene oxide block) have been studied by small-angle neutron scattering (SANS) and viscometry. The effect of LiCl was found to be significantly different from those observed for other alkali metal chloride salts such as NaCl and KCl. This can be explained on the basis of the complexation of hydrated Li(+) ions with the PEO chains in the micellar corona region. The interaction between the chains and the ions is more significant in the case F127 because of its larger PEO block size, and therefore, micelles of this copolymer show an enhanced degree of hydration in the presence of LiCl. The presence of the hydrated Li(+) ions in the micellar corona increases the amount of mechanically trapped water there and compensates more than the water molecules lost through the dehydration of the PEO chains in the presence of the Cl(-) ions. The enhancement in micellar hydration leads to a decrease in the minimum concentration required for the F127 solution to form a room-temperature cubic gel phase from 18% to 14%. Moreover, for both copolymers, the temperature range of stability of the cubic gel phase also increases with increasing LiCl concentration, presumably because of the ability of the Li(+) ions to reduce micellar dehydration with increasing temperature. Viscosity studies on a poly(ethylene glycol) (PEG) homopolymer with a size equivalent to that of the PEO block in F127 (4000 g/mol) also suggest that the dehydrating effect of the Cl(-) ion on the PEG chain is compensated by its interaction with the hydrated Li(+) ions.     

Structure and interactions of block copolymer micelles of Brij 700 studied by combining small-angle X-ray and neutron scattering

Spherical micelles of the diblock copolymer/surfactant Brij 700 (C(18)EO(100)) in water (D(2)O) solution have been investigated by small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS). SAXS and SANS experiments are combined to obtain complementary information from the two different contrast conditions of the two techniques. Solutions in a concentration range from 0.25 to 10 wt % and at temperatures from 10 to 80 degrees C have been investigated. The data have been analyzed on absolute scale using a model based on Monte Carlo simulations, where the micelles have a spherical homogeneous core with a graded interface surrounded by a corona of self-avoiding, semiflexible interacting chains. SANS and SAXS data were fitted simultaneously, which allows one to obtain extensive quantitative information on the structure and profile of the core and corona, the chain interactions, and the concentration effects. The model describes the scattering data very well, when part of the EO chains are taken as a "background"contribution belonging to the solvent. The effect of this becomes non-negligible at polymer concentrations as low as 2 wt %, where overlap of the micellar coronas sets in. The results from the analysis on the micellar structure, interchain interactions, and structure factor effects are all consistent with a decrease in solvent quality of water for the PEO block as the theta temperature of PEO is approached.     

Morphology of hybrid polystyrene-block-poly(ethylene oxide) micelles: analytical ultracentrifugation and SANS studies

Morphology and structure of aqueous block copolymer solutions based on polystyrene-block-poly(ethylene oxide) (PS-b-PEO) of two different compositions, a cationic surfactant, cetyl pyridinium chloride (CPC), and either platinic acid (H2PtCl6.6H2O) or Pt nanoparticles were studied using a combination of analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), and small angle neutron scattering (SANS). These studies combining methods contributing supplemental and analogous structural information allowed us to comprehensively characterize the complex hybrid systems and to discover an isotope effect when H2O was replaced with D2O. In particular, TEM shows formation of both micelles and larger aggregates after incorporation of platinic acid, yet the amount of aggregates depends on the H2PtCl6.6H2O concentration. AUC reveals the presence of micelles and micellar clusters in the PS-b-PEO block copolymers solution and even larger (supermicellar) aggregates in hybrids (with CPC). Conversely, SANS applied to D2O solutions of the similar species indicates that micelles are spherical and no other micellar species are found in block copolymer solutions. To reconcile the SANS and AUC data, we carried out AUC examination of the corresponding D2O block copolymer solutions. These measurements demonstrate a pronounced isotope effect on micelle aggregation and micelle size, i.e., no micelle aggregation in D2O solutions, revealing good agreement of AUC and SANS data.