Crosslinking of vinyl‐terminated biphenyl and naphthalene side‐chain liquid‐crystalline poly(epichlorohydrin) derivatives

We performed the crosslinking of vinyl‐terminated biphenyl and naphthalene side‐chain liquid‐crystalline polyethers using peroxide‐type initiators with and without the addition of tertiary amine promoters. The crosslinking temperatures were chosen in the range of mesophase stability to allow the mesophase order to be frozen. The biphenyl derivatives, with a high isotropization temperature, were crosslinked to a large extent. This led to anisotropic thermosets. To crosslink naphthalene derivatives, amine promoters were needed, but degrees of crosslinking were lower, and anisotropic elastomers were obtained. Crosslinking processes were studied by differential scanning calorimetry, polarized optical microscopy, and Fourier transform infrared spectroscopy. The nature of the frozen mesophase was confirmed by X‐ray diffraction studies on mechanically oriented samples. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2237–2244, 2002     

Characterization of ring‐opening polymerization of genipin and pH‐dependent cross‐linking reactions between chitosan and genipin

In this study, a novel chitosan‐based polymeric network was synthesized by crosslinking with a naturally occurring crosslinking agent—genipin. The results showed that the crosslinking reactions were pH‐dependent. Under basic conditions, genipin underwent a ring‐opening polymerization prior to crosslinking with chitosan. The crosslink bridges consisted of polymerized genipin macromers or oligomers (7 ～ 88 monomer units). This ring‐opening polymerization of genipin was initiated by extracting proton from the hydroxyl groups at C‐1 of deoxyloganin aglycone, followed by opening the dihydropyran ring to conduct an aldol condensation. At neutral and acidic conditions, genipin reacted with primary amino groups on chitosan to form heterocyclic amines. The heterocyclic amines were further associated to form crosslinked networks with short chains of dimmer, trimer, and tetramer bridges. An accompanied reaction of nucleophilic substitution of the ester group on genipin by the primary amine group on chitosan would occur in the presence of an acid catalysis. The extent in which chitosan gels crosslinked with genipin was significantly dependent on the crosslinking pH values: 39.9 ± 3.8% at pH 5.0, 96.0 ± 1.9% at pH 7.4, 45.4 ± 1.8% at pH 9.0, and 1.4 ± 1.0% at pH 13.6 (n = 5, p < 0.05). Owing to the different crosslinking extents and different chain lengths of crosslink bridges, the genipin‐crosslinked chitosan gels showed significant difference in their swelling capability and their resistance against enzymatic hydrolysis, depending on the pH conditions for crosslinking. These results indicated a direct relationship between the mode of crosslinking reaction, and the swelling and enzymatic hydrolysis properties of the genipin‐crosslinked chitosan gels. The ring‐opening polymerization of genipin and the pH‐dependent crosslinking reactions may provide a novel way for the preparation and exploitation of chitosan‐based gels for biomedical applications. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1985–2000, 2005     

Molecular modeling of cellulose in amorphous state. III. An innovative elastomeric crosslink system

The flexibility of molecular structures of rubber materials was evaluated using molecular modeling techniques to develop new crosslink agents which improve deformation recovery of cellulose without significant loss of the mechanical strength. Among the studied structures Poly(propylene oxide) (PPO) pentamer appears to be the most flexible and coiled one. Our calculation results showed that, cellulose crosslinked with PPO pentamers had similar deformation recovery to that crosslinked with DMDHEU. No conformation transitions were observed in these crosslinks when cellulose models were extended to 15% strain, which is consistent with the previous result that conformation transitions in crosslinks should be avoided upon extension to achieve a good recovery on crosslinked cellulose. In addition, PPO crosslinks did not significantly affect the breaking strain of cellulose based upon the cavity volume calculations, and they helped to remove the stress concentration among cellulose chains as suggested by the results of hydrogen bonding analysis. Thus, breaking strength of cellulose might not be significantly affected by PPO crosslinks as well. The preliminary experimental results confirmed above observations. Therefore, PPO pentamer appears to be a promising elastomeric backbone structure of crosslinking agents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1821–1833, 2007     

Polyurethanes crosslinked by metals and their complexes with crown ether

Two types of crosslinked polyurethanes (PU) have been synthesized: (a) PU crosslinked by metal ions (Cu²⁺ and Co²⁺), and (b) PU crosslinked by the complexes of metals with crown ether. Using X-ray scattering under small and wide angles the peculiarities of the structure of networks have been investigated. It was found that PU crosslinked by the metal crown ether complexes have a looser structure because of the bulky crosslink and diminished molecular mobility of the chains between two crosslinks, as was proven by the dielectric spectroscopy method. The X-ray and IR data have allowed proposing a scheme of the structure of the crosslinked PU with various types of crosslinks. The structures discovered may be considered as similar to metal catenandes. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1379–1386, 1998     

Preparation and characterization of a nanoscale poly(vinyl alcohol) fiber aggregate produced by an electrospinning method

Nanoscale poly(vinyl alcohol) (PVA) fiber (100–500 nm) aggregates were prepared with an electrospinning technique. Additionally, a chemical crosslinking method was used to crosslink the nanoscale PVA fiber aggregates. Differential scanning calorimetry, wide‐angle X‐ray diffraction, and scanning electron microscopy techniques were employed to characterize the PVA fiber aggregates. The different crosslinking densities of the PVA fiber aggregates were obtained through the control of the weight percentage of glyoxal to PVA. The crosslinking densities due to heat treatment and chemical crosslinking were studied. The influence of heat treatment could be neglected in contrast to chemical crosslinking when the curing temperature was 120 °C. The primary factor that affected the crosslinking density was the volume of the chemical crosslinking agent. The results showed that the properly crosslinked PVA fiber aggregates had better antiwater solubility and mechanical properties than the noncrosslinked PVA fiber aggregates. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1261–1268, 2002     

Electromechanical properties of poly(vinylidene fluoride‐trifluoroethylene) networks

Random copolymers of 65% vinylidene fluoride and 35% trifluoroethylene were reacted with an organic peroxide, in combination with a free‐radical trap, to yield networks of high crosslink density. Crystallization subsequent to the crosslinking yielded ferroelectric materials exhibiting large electrostrictive strains. The magnitude of the electromechanical response increased with an increasing degree of crosslinking, even though this reduced the crystallinity. For the most crosslinked sample, longitudinal (thickness) strains as high as 12% were induced at an electric field of 9 MV/m. This electrostrictive performance exceeded that obtained to date with any poly(vinylidene fluoride) material. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1975–1984, 2002     

Synthesis of siloxane‐crosslinked polysilylenemethylenes by chlorodephenylation

Thermally stable polysilylenemethylenes (PSMs) with siloxane crosslinking moieties were successfully synthesized by chlorodephenylation of preformed poly(methylphenylsilylenemethylene) (PMPSM) and subsequent in situ alcoholysis/hydrolysis/condensation reactions. The simplified process and mild reaction conditions are quite advantageous. The crosslink density of these materials can be adjusted by the degree of chlorodephenylation, although an alkoxysilyl group remains to some extent. The resulting crosslinked PSMs have well defined structures in which the backbone is composed of MePhSiCH₂ and Me(MeO)SiCH₂ as well as Me(O_1/2)SiCH₂ as a crosslinking moiety. The resulting crosslinked PSMs exhibited glass‐transition temperatures ranging from 15 to 20 °C, whereas that of linear PMPSM was 22 °C. The crosslinked PSMs remained unchanged in weight below 300 °C, suggesting that they are thermally stable up to that temperature. The good solvent resistance caused by crosslinking as well as high thermal stability of these materials allow us to design new PSM‐based polymer blends and preceramic polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 416–422, 2002     

A facile and controllable synthesis of dual‐crosslinked elastomers based on linear bifunctional polydimethylsiloxane oligomers

Dual‐crosslinked supramolecular elastomers with the hybrid network consisting of hydrogen bonds and covalent bonds combine the reversibility of hydrogen bond and mechanical properties of covalent crosslinking network. In this article, isocyanate mixture is used as curing agent to prepare dual‐crosslinked elastomer based on bifunctional polydimethylsiloxane under mild condition. This method can effectively build up a hybrid network with the designed structure. A series of elastomers with same hydrogen bond density and variable covalent crosslinking degree are obtained. Swelling measurements and ¹H‐NMR spectra confirm the feasibility and controllability of curing method, the increasing of bifunctional isocyanate give rise to higher covalent crosslinking degree, improving the solvent resistance. The studies on viscoelastic property show that the introduction of an irreversible covalent crosslinking network stabilize the hybrid network, restrain the chain movement. The mechanical and self‐healing property studies reveal that the covalent crosslink significantly reinforce the whole network, while the reparable strength seems to mainly depend on the hydrogen bond density. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3760–3768     

Synthesis and properties of waterborne self‐crosslinkable sulfo‐urethane silanol dispersions

A novel type of crosslinkable waterborne polyurethane ionomer was prepared by the acetone process. Two new types of sulfonated diols compatible with this process were synthesized from dimethyl 5‐sodium sulfo isophthalate using a one‐ or two‐stage method. Isocyanate‐terminated polyurethane oligomers were prepared from the sulfonated diols with various combinations of diols and diisocyanates and subsequently reacted with amino silane derivatives. Stable, low‐volatile organic chemical, waterborne dispersions of the sulfo‐urethane silanol polymers spontaneously crosslink upon drying without extra additives or processing steps. Despite the lack of organic coalescing solvents, the dispersions have minimum film‐forming temperatures below 10 °C, regardless of glass‐transition temperature. Tensile strengths up to 6000 psi with elongations between 300 and 600% were obtained for the crosslinked films. The hard‐segment content of the films can be controlled to produce films with a Sward–Rocker hardness value up to 42. Through silane end‐group modification, the crosslinking density of the films can also be modified to produce polyurethanes with a wide range of physical properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3037–3045, 2002     

Dynamic mechanical behavior of acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) blends

The dynamic mechanical behavior of uncrosslinked (thermoplastic) and crosslinked (thermosetting) acrylonitrile butadiene rubber/poly(ethylene‐co‐vinyl acetate) (NBR/EVA) blends was studied with reference to the effect of blend ratio, crosslinking systems, frequency, and temperature. Different crosslinked systems were prepared using peroxide (DCP), sulfur, and mixed crosslink systems. The glass‐transition behavior of the blends was affected by the blend ratio, the nature of crosslinking, and frequency. sThe damping properties of the blends increased with NBR content. The variations in tan δ_max were in accordance with morphology changes in the blends. From tan δ values of peroxide‐cured NBR, EVA, and blends the crosslinking effect of DCP was more predominant in NBR. The morphology of the uncrosslinked blends was examined using scanning electron and optical microscopes. Cocontinuous morphology was observed between 40 and 60 wt % of NBR. The particle size distribution curve of the blends was also drawn. The Arrhenius relationship was used to calculate the activation energy for the glass transition of the blends, and it decreased with an increase in the NBR content. Various theoretical models were used to predict the modulus of the blends. From wide‐angle X‐ray scattering studies, the degree of crystallinity of the blends decreased with an increasing NBR content. The thermal behavior of the uncrosslinked and crosslinked systems of NBR/EVA blends was analyzed using a differential scanning calorimeter. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1556–1570, 2002     

Effect of crosslink on the characteristic length of glass transition of network polymers

The characteristic length of the glass transition temperature was evaluated for crosslinked bulk polystyrenes and poly(methyl methacrylate)s by differential scanning calorimetry. The characteristic length, which corresponds to a length scale of the cooperative rearrangement due to polymer segmental relaxation, was revealed to decrease with increase in the degree of crosslink. The relative values of configurational entropy for crosslinked polymers were evaluated based on a simple polymer network model on a cubic lattice. As a result, the configurational entropy of the smallest cooperatively rearranging region was revealed to decrease with increase in the degree of crosslink, which is responsible for the above behavior of the characteristic length. The effects of crosslink on the characteristic length and the glass transition temperature were found to be stronger for crosslinked poly(methyl methacrylate)s than for crosslinked polystyrenes, which reflects the difference in the structure of crosslink segment. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1958–1966, 2006     

Thermoreversible covalent crosslinking of maleated ethylene/propylene copolymers with diols

The objective of this study is the thermoreversible crosslinking of maleated ethylene/propylene copolymer (MAn‐g‐EPM) using the equilibrium reaction with diols. Covalent hemi‐ester crosslinks are formed via the reaction of anhydrides with alcohols, while an equilibrium shift at elevated temperatures may result in their removal. High conversions to hemi‐ester are obtained at low temperatures in the presence of p‐toluenesulfonic acid, whereas conversions are low at high temperatures. The presence of microphase‐separated aggregates acting as physical crosslinks was demonstrated for MAn‐g‐EPM and all crosslinked materials. The covalent crosslinks were only formed within the aggregates, resulting in stronger aggregates that persisted to higher temperatures. The tensile strength and elasticity were significantly improved upon increasing level of crosslinking, whereas the type of diol has less influence. The covalently crosslinked MAn‐g‐EPM was reprocessable via compression molding at temperatures above 175 °C. Irreversible diester formation occurred for the longer diols, but did not prevent reprocessing, while short diols evaporated. Both effects lowered the level of crosslinking, resulting in significantly changed mechanical properties. The reprocessability does not originate from an equilibrium shift, but from a dynamic exchange between crosslinked and non‐crosslinked functional groups, which allows crosslinks to disconnect and the corresponding chain segments to diffuse between aggregates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1810–1825, 2008     

Crosslinking induced by in‐situ coordination in acrylonitrile butadiene rubber/poly(vinyl chloride) alloy,filled with anhydrous copper sulfate particles

Acrylonitrile butadiene rubber (NBR)/poly(vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, was investigated for the first time. The material could be crosslinked in the existence of CuSO₄ by heat pressing, without any other crosslink agents. The crosslinking in the material was induced by in situ coordination between nitrile groups of NBR and solid CuSO₄ particles, which is thoroughly different from the traditional vulcanization of rubber materials. The coordination crosslinking is formed during heat pressing, other than in solutions, which is valuable for practical applications. The resulting material showed excellent tensile properties, and the maximum strength was close to 90 MPa. The CuSO₄ particles act not only as crosslink agents, but also as reinforcing fillers in the polymer matrix. In this work, dynamic mechanical analysis, differential scanning calorimetry, Fourier transform infrared spectrum, X‐ray photoelectron spectroscopy, scanning electron microscope, energy‐dispersive X‐ray spectrum, equilibrium swelling method, and tensile test were performed for the characterization of the material. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 378–386, 2006     

Synthesis of polymeric core–shell particles using surface‐initiated living free‐radical polymerization

An easy and novel approach to the synthesis of functionalized nanostructured polymeric particles is reported. The surfactant‐free emulsion polymerization of methyl methacrylate in the presence of the crosslinking reagent 2‐ethyl‐2‐(hydroxy methyl)‐1,3‐propanediol trimethacrylate was used to in situ crosslink colloid micelles to produce stable, crosslinked polymeric particles (diameter size ～ 100–300 nm). A functionalized methacrylate monomer, 2‐methacryloxyethyl‐2′‐bromoisobutyrate, containing a dormant atom transfer radical polymerization (ATRP) living free‐radical initiator, which is termed an inimer (initiator/monomer), was added to the solution during the polymerization to functionalize the surface of the particles with ATRP initiator groups. The surface‐initiated ATRP of different monomers was then carried out to produce core–shell‐type polymeric nanostructures. This versatile technique can be easily employed for the design of a wide variety of polymeric shells surrounding a crosslinked core while keeping good control over the sizes of the nanostructures. The particles were characterized with scanning electron microscopy, transmission electron microscopy, optical microscopy, dynamic light scattering, and Raman spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1575–1584, 2007     

Synthesis,characterization, and applications in photovoltaic cells of oxetane‐functionalized P3HT derivatives

Several crosslinkable oxetane‐functionalized copolymers, containing regio‐regular segments of 3‐hexylthiophene, are synthesized using the Grignard metathesis polymerization. The optical and electrochemical properties of the new polymers, both in the soluble and crosslinked forms, are reported. These polymers are used in the preparation of organic photovoltaics upon blending with PCBM as electron‐acceptor. The effect of the crosslinking of these copolymers, once the blend films are formed, on the devices performance is also studied. In particular, the insertion of the oxetane‐functionalized thiophene comonomers leads to a decrease of the devices performance, which is further decreased upon crosslinking of the copolymer. However, the stability of the devices overall improves upon crosslinking of the copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 652–663     

Preparation and properties of two-component hydrogels based on 2-acrylamido-2-methylpropane sulphonic acid

Xerogels comprising 2-acrylamido-2-methylpropane sulphonic acid (AMPS) and acrylic acid as well as AMPS and acrylamide crosslinked with hexafunctional crosslinking agent have been prepared by catalytic initiation polymerization to complete conversion. Different percentages of hexafunctional crosslinker, 1,1,1-trimethylolpropane trimethacrylate, were used to prepare crosslinked copolymers having different degree of crosslink densities. The crosslinked copolymers were swollen in water to equilibrium. The volume fraction of polymer, the swelling capacity and the equilibrium water content were obtained. Low conversion polymerization was used to determine the reactivity ratios of both monomer pairs. Fourier transform spectroscopy was utilized to measure the molar ratio of copolymers constituents. © 1998 John Wiley & Sons, Ltd.     

Structure and flow behavior of crosslinked ethyl acrylate–methacrylic acid copolymer dispersion particles

 Changes in viscosity, pH and static light scattering behavior on alkali addition of model dispersions of statistical copolymers of ethyl acrylate with 15 and 50 wt% of methacrylic acid prepared by semicontinuous emuslion copolymerization and crosslinked with various amount of N,N′-methylenebisacrylamide were investigated. It was found that about 1% of crosslinking agent was sufficient to prevent unpredictable disintegration of dispersion particles and gauranteed reproducible flow behavior of alkalinized dispersions. The viscosity of alkalinized dispersions of crosslinked particles at low concentration is controlled by the effective hydrodynamic volume of swelled particles which decreases with the crosslinking degree of copolymer. On the other hand, at higher particle concentration close to critical concentration at which the space is filled up by swelled particles the influence of particle interaction prevails and due to lower deformability of crosslinked particles viscosity increases with a crosslinking degree. In comparison with similar dispersions prepared without a crosslinking agent these results indicated much uniform structure of dispersion particles and suppression of influence of random crosslinking due to chain transfer reactions. The study shows that dispersions of crosslinked copolymers of this type could be considered as thickners of latex binders with stable and reproducible thickening properties. Received: 23 February 1998 Accepted: 11 June 1998     

Crosslinkable citronellol containing polyphosphazenes and their biomedical potential

An increased focus exists on the development of materials that might serve as ligament or tendon tissue engineering scaffolds. Requirements for a suitable candidate polymer include biodegradability, biocompatibility, and elasticity. In an attempt to meet these requirements novel citronellol‐containing polyphosphazenes were synthesized, characterized, and crosslinked to generate elastomers. Citronellol was chosen as a side group due to its anti‐inflammatory properties in addition to the presence of a double bond in its structure to permit polymer crosslinking. Alanine ethyl ester was chosen as a co‐substituent to tune hydrolysis rates without severely affecting the glass transition temperatures of the final polymers. Hydrolysis of the uncrosslinked polymers in the form of films in deionized water at 37 °C showed between ～8 and 16% mass loss and between a ～28 and 88% molecular weight decline over 12 weeks. Polymers were also crosslinked using ultraviolet radiation for increasing amounts of time. Preliminary mechanical testing of the homo‐citronellol polymer indicated increasing modulus and decreasing tensile strength with increased crosslink density. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2258–2265     

A generalized theory for the glass transition temperature of crosslinked and uncrosslinked polymers

A generalized theory for the glass transition temperature of crosslinked and uncrosslinked polymers has been developed, which takes into account the influences of end groups, branching, and crosslinking, and their functionality distribution. DiBenedetto's theory was found to correctly characterize the influence of crosslinks on the glass temperature. Normalized to constant crosslink functionality, the crosslink constant is a universal parameter suggesting that the entropic theory of glasses is applicable to crosslinked systems. Data on linear polymers and networks from the crosslinking of polymer chains, vinyl/divinyl-copolymers and step-growth polymers, such as polyurethanes, amine-cured epoxies, or inorganic glasses, are presented.     

Utilizing thiol–ene chemistry for crosslinked nickel cation‐based anion exchange membranes

Metal cation‐based anion exchange membranes (AEMs) are a unique class of materials that have shown potential to be highly stable AEMs with competitive conductivities. Here, we expand upon previous work to report the synthesis of crosslinked nickel cation‐based AEMs formed using the thiol–ene reaction. These thiol–ene‐based samples were first characterized for their morphology, both with and without nickel cations, where the nickel‐containing membranes demonstrated a disordered scattering peak characteristic of ionic clusters. The samples were then characterized for their water uptake, chemical and mechanical stability, and conductivity. They showed a combination of high water content and extreme brittleness, which also resulted in fairly low conductivity. The brittleness resulted from large water swelling as well as the need for each nickel cation to act as a crosslinker, necessary with the current nickel‐coordination chemistry. Therefore, increasing the ion exchange capacity (IEC) for these types of AEMs, important for enhancing conductivity, also increased the crosslink density. The low conductivity and brittleness seen in this work demonstrated the need to develop non‐crosslinking metal‐complexes. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 328–339