(伪)单调集值映射拟均衡问题

主要讨论G-凸上的广义向量拟均衡问题,推广W.O ettli,D.Sch l ger,Q.H.A nsari,I.V.K onnov,和J.C.Y ao的一些主要结果.     

β混合随机变量序列加权和的收敛性

本文研究了混合随机变量序列加权和的收敛性.利用Utev, S.和Peligrad, M不等式得到了混合随机变量序列加权和的收敛性定理及Hajeck-Rènyi型不等式,推广和改进了W.F,Stout,吴群英,J.Hajeck和A.Rènyi.的相应结论.     

股价最简微分方程,其解及与Black-Scholes模型的假设的相互关系

在系数的某种等价关系条件下,股价的两类数学表达式,一类是基于明确型描述的由类似固体力学方法导出的最简微分方程(S.D.E.)的解,另一类是基于不确定型描述(即统计理论)的Black-Scholes模型的假设(A.B-S.M.),即股价密度函数服从对数正态分布,可以是完全相同的.S.D.E.的解仅适用于股市的常规情形(无利好或利空消息,等),因此,A.B-S.M.的适用范围也相同.     

POLES OF ZETA FUNCTIONS OF COMPLETE INTERSECTIONS

51.IntroductionLetF.beafinitefieldofqele~swithcharederisticp.LetXbeanThdilnensionalalgebraicsetdeadedoverF..ThezetafunctionofX/F.isdennedbywhereXOdenotesthesetofclosedpointsOfX/F.and#X(F.d)denotesthenUInberof.F.d-rationalpointsonX.ItiseasytoseethatZ(X,T)isapowerserieswithintegercoefficients.Dwork'srationalltytheoremIg]showsthatthezetafunctionZ(X,T)isrationalinT.ThuS,therearealgebraicintegerspll'.3Pr,pl,'3basuchthatThereisagoodreasonthatwemoantheabovezetafunctionbythepower(--1)"-…     

名人名著谈统计学

W.E.Denting(1940),Discussion of Professor Hottelling's Paper "The Teaching of Statistics"(Ann.Math.Stat.Vol.11,457-470): Above all,a statistician must be a scientist. 最重要的是,统计学家应该是科学家.     

CONVERGENCE RATE OFDISTRIBUTIONS OF TRIMMED SUMS

1.IntroductionLet{Xn,n2l}beasequenceofi.i.d.randomvariableswithnondegeneratedistributionF.Fornonnegativeintegersk.andrn,k. rn相似文献   

CONTINUOUS L-DOMAINS

61.IntroductionConiinuousDCPOisoneofthemostimportantstructuresin-domaintheory.Unfor-tunatelythecategoryofcolltinuousDCPOandtheScottcontinuousfunctionsfailstobeCartesianclosed,soitisaverysignificantproblemtofinditsmakimalCartesianclosedfullsubcategories.ThecategoryofL-domain'swasdiscoveredbyA.JungwhilesolvingtheproblemoffindingmtalmalCartesianclosedcategoriesofalgebraicDCPO's[1l,andrecentworksbyA.JungandG.Gund.r[2]showsthatthecategoryofL-domain'sisaninterestingcategoryOntheotherhand,i…     

仿酉对称矩阵的构造及对称正交多小波滤波带的参数化

仿酉矩阵在小波、多小波、框架的构造中发挥了重要的作用.本文给出仿酉对称矩阵(简记为p.s.m.)的显式构造算法,其中仿酉对称矩阵是元素为对称或反对称多项式的仿酉矩阵.基于已构造的p.s.m.和已知的正交对称多小波(简记为o.s.m.),给出o.s.m.的参数化.恰当地选择一些参数,可得到具有一些优良性质的o.s.m.,例如Armlet.最后作这一个算例,构造出一类对称的Chui-Lian Armlet滤波带.     

中学生中存在的24种不良学习习惯

良好的学习习惯是有效提高学业成绩的保障,不良的学习习惯影响、制约着广大学生的学习效率.现列举24种当代中学生不良学习习惯,愿广大学生、家长对照参考,矫正不足,养成良好习惯,提高学习水平.1.学习、生活、作息不规律,无计划.2.学习用品乱堆乱放,用时又找不到.3.审题不清,随意下笔.4.课堂上不主动回答老师提出的问题.     

实数

中考要求一、实数1.了解平方根、算术平方根、立方根的概念,会用根号表示数的平方根、立方根.2.了解乘方与开方互为逆运算,会用平方运算求百.以内整数的平方根,会用立方运算求百以内整数(对应的负整数)的立方根,会用计算器求平方根和立方根.3.了解无理数和实数的概念,了解实数与数轴上的点一一对应.会求实数的相反数与绝对值.     

Optimal production run time for a deteriorating production system under an extended inspection policy

A deteriorating production system is subjected to random deterioration from an in-control state to an out-of-control state with a general shift distribution. In order to reduce the defective items, part inspection policy, under which production inspections are performed only at the end of the production run, and full inspection policy are both considered in the literature. Moreover, the former dominates the latter. Since the product produced towards the end of a production cycle are more likely to be defective, it can further economize the inspection costs that they are directly reworked without inspection. In this paper, we propose an extended product inspection policy for a deteriorating production system. Product inspections are performed in the middle of a production cycle, and after the inspection, all products produced until the end of the production run are fully reworked. Based on the model, we show that there exists a production run time and a corresponding unique inspection policy such that the expected total cost per item per cycle is minimized. Finally, numerical examples are provided to illustrate our extended inspection policy, and indicate that such product inspection model will reduce the quality-related cost than part inspection does.     

考虑检验错误的集团抽样检验接收概率函数

本文给出存在集团检验误差时的集团抽样检验接受概率计算公式,该公式可用于设计抽样方案、分析集团检验错误对抽样方案的影响.采用计算机模拟抽样检验的方法对给出的公式加以验证,证明了该所给公式的正确性.同时通过对集团检验错误存在与否的抽样检验特征(OC)曲线的比较,指出:以往的集团抽样检验方案设计,都是在假设无检验误差前提下设计的,在抽样检验中,若存在检验错误,会严重影响抽样检验的接收概率,使抽样检验结果不能客观地反映检验批的质量.     

有界区间假设检验问题的研究

提出原假设为一个有界区间时的假设检验问题,给出了求这种假设检验的接受域、拒绝域、犯两类错误概率的方法,举例说明了这种假设检验在实际中的广泛应用.     

Economic optimization of off-line inspection with inspection errors

In this paper, we find the optimal inspection policy for the production process of a finite batch of items with inspection errors. We study the effects of inspection errors on the optimal solution and determine which unit should be inspected to minimize the expected total costs. We also find the expected number of inspections for a given batch size. Comparisons of total costs are investigated numerically among the cost minimizing policy, the policy of perfect information, and the policy of zero-defects.     

Integrated inventory and inspection policies for stochastic demand

In this paper, we develop integrated inventory inspection models with and without replacement of nonconforming items. Inspection policies include no inspection, sampling inspection, and 100% inspection. We consider a buyer who places an order from a supplier when his inventory level drops to a certain point, due to demand which is stochastic in nature. When a lot is received, the buyer uses some type of inspection policy. The fraction nonconforming is assumed to be a random variable following a beta distribution. The order quantity, reorder point and the inspection policy are decision variables. In the inspection policy involving determining sampling plan parameters, constraints on the buyer and manufacturer risks is set in order to obtain a fair plan for both parties. A solution procedure for determining the operating policies for inventory and inspection consisting of order quantity, sample size, and acceptance number is proposed. Numerical examples are presented to conduct a sensitivity analysis for important model parameters and to illustrate important issues about the developed models.     

Continuous inspection with memory

In this article we consider continuous inspection plans (inspection stopping plans) as recurrent events in the sequence of investigation outcomes (steps of inspection). Along with traditional continuous inspection plans, it is the first time we consider plans of continuous inspection with memory which memorize the result of the last step of inspection after the inspection is stopped. For a wide range of plans of both traditional continuous inspection and continuous inspection with memory, we have obtained the main characteristics, i.e. mathematical expectation of the number of inspected objects before the inspection is stopped and variance.     

Capacity planning under different inspection strategies

This paper addresses the issue of location of inspection stations along a serial production line. As a function of inspection site, the capacity required to test and repair the parts would vary. The production-inspection model developed provides management with information on such capacity planning issues. It integrates the issues of inspection location, inspection capacity, and production capacity. We consider a two-stage production line and evaluate cases when there are inspection sites after each production stage and when inspection is carried out after the final stage. In the latter case, we find the conditions when the safety stock required to meet the demand is higher. This has managerial implications because the inventory level is not only higher, it is held after the final stage, i.e. has more value added onto it. However, if there are inspection stations after each stage, the capacity required to test and repair the parts is higher. The intent of this work is to provide insights into designing production-inventory systems for the serial model that we consider. We also discuss the generalization of the scope of the two-stage model to an N stage production line. In an extension to the problem, we consider the situation when not all the defectives can be repaired. We extend the basic model by considering the effect of partial scraping of the defectives.     

基于检测数据的指数型元件贮存可靠性的置信限

为了评估元件或产品在贮存期间的可靠性，我们要对元件进行检测．一般地，在ti时刻检测ni个元件，设每次检测的正确率为ri，（ri已知，ri＞1／2）．检测结果成功的元件数为si（i＝1，k）．本文将基于此类数据，给出一种方法，来确定元件的贮存可靠性的置信下限，并给出了数字例．     

A note on “Quality investment and inspection policy in a supplier-manufacturer supply chain”

In a recent paper, Hsieh and Liu (2010) consider quality investment and inspection strategies of one supplier and one manufacturer. They propose solutions of four non-cooperative game models with different degrees of information available about the players’ inspection sampling rates and quality investments. For the two most comprehensive scenarios, we show that these (interior) solutions do not always represent the optimal solutions, as the boundary solutions lead to considerably higher profits. Furthermore, we propose modified algorithms providing the optimal solutions by including the boundary solutions into the consideration.     

The impact of inspection errors,imperfect maintenance and minimal repairs on an imperfect production system

This paper develops an integrated model of production lot-sizing, maintenance and quality for considering the possibilities of inspection errors, preventive maintenance (PM) errors and minimal repairs for an imperfect production system with increasing hazard rates. In this study, a PM activity is imperfect in that a production system cannot be recovered as good as new and might cause the production system to shift to the out-of-control state with a certain probability. Numerical analyses are used to simulate the effect of changes in various parameters on the optimal solution for which the time that the process remains in the in-control state is assumed to follow a Weibull distribution. In addition, we investigate the effects of inspection errors and PM errors on the minimum total cost of the optimal inspection interval, inspection frequency and production quantity.