沸石分子筛合成由微孔向中孔的飞跃

介绍了沸石分子筛合成由微孔向中孔的发展及中孔分子筛的合成近况, 比较了两类材料在合成、机理及模板作用的特殊性等方面的差异。     

钛硅介孔分子筛

综述了钛硅介孔分子筛的合成、表征及其应用研究进展.评述了钛硅介孔分子筛的合成方法与合成条件对分子筛结构性能、钛物种的配位状态和催化性能的影响.介绍了鉴定钛硅介孔分子筛内骨架钛原子的多种波谱学方法以及钛硅介孔分子筛在选择氧化、光催化、酸催化反应中的应用,并指出钛硅介孔分子筛是一种非常有应用前景的环境友好的多相催化剂.     

氩吸附法研究多级孔分子筛的孔结构

采用不同方法分别制备了双介孔分子筛、介微孔分子筛及介孔沸石材料,利用氩吸附法并结合XRD技术表征了多级孔分子筛的孔结构。探讨了适用于多级孔分子筛的孔径分布计算方法,揭示了不同类型吸附等温线与孔径分布、孔型及孔容等之间的关系。研究表明,对于多级孔分子筛、微孔和介孔的孔径分布分别用SF法和BJH法计算较适宜,全孔分析可用NLDFT法计算。通过对TS-1介孔沸石的孔结构分析发现, TPAOH 在改性制备介孔TS-1的过程中起到了生成介孔及促进二次晶化的双重作用。     

以介孔分子筛为金属催化剂载体制备纳米碳管

 以不同的介孔分子筛作为金属催化剂载体,对催化合成纳米碳管进行了系统的研究,讨论了反应条件对纳米碳管纯度和产量的影响. 结果表明,不同的介孔分子筛对金属活性中心的形成、碳组分的扩散、纳米碳管的管径及形态均有明显的影响. 此外,金属的种类、状态和含量也影响纳米碳管的合成. 探索了合成高产量纳米碳管的条件,并对介孔分子筛上生长纳米碳管的特点进行了讨论.     

Synthesis and characterization of mesoporous molecular sieves

In the synthesis of mesoporous molecular sieves of the type MCM-41, different cationactive surfactants and sources of silicon were used. Moreover, Al-MCM-41 samples with different content of aluminium were synthesized. MCM-41 and Al-MCM-41 were synthesized at elevated temperature in stainless-steel autoclaves. Prepared mesoporous molecular sieves were characterized by powder X-ray diffraction (XRD), physical adsorption of nitrogen at the temperature of −197°C, sorption capacity of benzene, and by infrared spectroscopy (FTIR). Acidity was measured for Al-MCM-41 by temperature programmed desorption of ammonia (TPDA) and by FTIR of adsorbed pyridine. Acid catalytic activity of Al-MCM-41 was tested by isomerization of o-xylene. Influence of the synthesis reproducibility, surfactant used, source of silicon, synthesis time, source of aluminium, and Si to Al mole ratio on the properties of mesoporous molecular sieves were evaluated.     

催化新材料——钛硅分子筛合成及应用研究*

评述了钛硅分子筛新催化材料的合成及其催化应用的研究进展, 包括钛硅分子筛(TS21) 的水热合成方法、原料、模板剂、影响因素、TS21 同晶取代法合成、表征、活性中心、钛硅分子筛双氧水体系的应用研究及近年中孔钛硅分子筛的进展。对未来的研究提出了建议。     

用双表面活性剂为共模板合成中孔分子筛MCM-48

利用水热法以非离子表面活性剂聚乙二醇辛基苯基醚和阳离子表面活性剂十六烷基三甲基溴化铵为共模板合成了中孔分子筛MCM-48.实验中发现利用较强的范德华力和氢键,聚乙二醇辛基苯基醚可在很大程度上降低合成MCM-48所需阳离子表面活性剂的用量,且利于制备有序性好、骨架聚合度高、稳定性好的MCM-48.通过调节聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵的比例,可得到不同物相结构的分子筛.     

Ru-SBA-15的合成、表征及催化活性

在酸性条件下直接合成了Ru-SBA-15．经XRD、N2吸附-脱附、TEM表征其保持了高度有序的六方介孔结构，并在用氧气催化氧化环己烷的过程中表现出了优异的催化性能．     

中孔分子筛MCM-41的合成与表征

以白炭黑和正硅酸乙酯为硅源,十二、十六烷基三甲基铵为模板剂,用水热法和室温直接法合成出中孔分子筛MCM-41,考察了对合成的影响因素,用红外光谱、吸附、孔分布、热分析等手段对这两种产物进行了表征。结果表明:这种分子筛可以在很宽的配比范围内获得,但较高水硅比更有利于合成;在水硅比较低的体系中得到了一种类MCM-41中孔相(亦应属于MCM-41),其XRD衍射峰较宽,2θ角度偏低,具有类似于无定形硅铝酸盐的骨架结构。     

介孔分子筛的酸性和水热稳定性

介孔分子筛材料在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有潜在的应用价值.但是,由于介孔分子筛材料较低的水热稳定性和较弱的酸性,极大地影响了其在催化研究中的广泛应用.本文系统地综述了最近几年在提高介孔分子筛酸性和水热稳定性的研究工作.其中包括:(1)将超酸组份负载于介孔分子筛的孔道中以达到提高介孔分子筛材料的酸强度的目的;(2)通过在合成介孔分子筛的过程中加入无机盐和有机胺等助剂或采用合适的后处理方法以提高介孔分子筛的水热稳定性;(3)通过新型模板剂来合成具有较高水热稳定性的介孔分子筛材料;(4)利用具有沸石分子筛基本结构单元的沸石分子筛导向剂与表面活性剂自组装来合成具有强酸中心和高温水热稳定的介孔分子筛材料.     

Structural and sorption properties of carbon replicas obtained by matrix carbonization of organic precursors in SBA-15 and KIT-6

We have carried out a comparative study of matrix carbonization of some organic precursors (sucrose, polydivinylbenzene, polyphenol-formaldehyde, polyacrylonitrile, acetonitrile) in SBA-15 and KIT-6 silica mesoporous molecular sieves. We have shown that carbon mesoporous molecular sieves of the CMK-8 type, obtained in KIT-6 mesopores, have better adsorption characteristics due to the features of the three-dimensional cubic structure, the larger pore volume and thickness of the walls of the framework. The maximum micropore volume is observed in CMK-3 and CMK-8, obtained by carbonization of polyphenol-formaldehyde and polydivinylbenzene, while the greatest specific surface area is observed on carbonization of sucrose, where the maximum hydrogen adsorption capacity is achieved at a level of ∼1.4 wt.% (77 K, 1 atm). We show that the mesopore surface coverage by hydrogen in carbon mesoporous molecular sieves increases as the degree of graphitization increases.     

Titanium-Containing Mesoporous Materials：Synthesis and Application in Selective Catalytic Oxidation

Titanium-containing mesoporous molecular sieves are of great significance in selective catalytic oxidation processes with bulky molecules. Recent researches and developments on the designing and synthesis of Ti-containing mesoporous materials have been reviewed. Various strategies for the preparation of Ti-containing rnesoporous materials, such as direct synthesis and post-synthesis, are described. Modifications of Ti-containing mesoporous materials by surface-grafting and atom-planting are also discussed. All approaches aimed mainly at the improving of the stability, the hydrophobicity, and mostly the catalytic activity. Structural and mechanistic features of various synthetic systems are discussed. Ti-containing mesoporous materials in liquid phase catalytic oxidation of organic compounds with H2O2 as an oxidant is briefly summarized, showing their broad utilities for green synthesis of fine chemicals by catalytic oxidative reactions.     

Preparation of hybrid organo-inorganic catalysts based on MSM-41 mesoporous molecular sieves and their properties in synthesis of ethyl <Emphasis Type="Italic">tert</Emphasis>-butyl ether

A series of sulfoorganosilica (vinyl-containing) catalysts based on MSM-41 mesoporous molecular sieves were prepared by template synthesis. The structure and properties of these catalysts and their catalytic characteristics in synthesis of ethyl tert-butyl ether were examined.     

FexOy/SBA-15介孔分子筛的合成以及性能研究

在酸性溶液中利用溶胶凝胶-pH值控制两步法直接合成Fe_xO_y/SBA-15介孔分子筛，同时利用场发射扫描电子显微镜(FESEM)、小角度X射线衍射(Low-angle XRD)、透射电子显微镜(TEM)以及振动样品磁强计(VSM)对制备的各种SBA-15介孔分子筛进行结构以及性能的测试、表征。结果显示Fe_xO_y均匀地分散在SBA-15的骨架中，而且会对SBA-15介孔分子筛起钉轧作用。而后着重研究了Fe_xO_y的加入对SBA-15介孔分子筛的热稳定性、催化特性以及磁学性能的影响。Fe_xO_y的引入可以增加制备的SBA-15介孔分子筛的热稳定性;Fe_xO_y的引入可以改善SBA-15介孔分子筛的催化活性，得到了开口的、石墨化程度较好的纳米碳管。Fe_xO_y的引入使SBA-15介孔分子筛具有明显的铁磁性。     

SYNTHESIS AND BIOTECHNOLOGICAL APPLICATIONS OF VINYL POLYMERINORGANIC HYBRID AND MESOPOROUS MATERIALS

We describe the sol-gel synthesis of a new family of organic-inorganic hybrid materials, in which various vinylpolymers are covalently bonded to and uniformly distributed in inorganic oxide matrices. The materials can be tailored tohave both good toughness and hardness while maintaining excellent optical transparency. Doping the sol-gel metal oxideswith optically active compounds such as D-glucose results in new optical rotatory composite materials. Removal of thedopant compounds from the composites affords mesoporous oxide materials, which represents a new, nonsurfactant-templated route to mesoporous molecular sieves. We have successfully immobilized a series of enzymes and other bioactiveagents in mesoporous materials. Catalytical activities of the enzyme encapsulated in mesoporous materials were found to bemuch higher than those encapsulated in microporous materials.     

苯及苯磺酸基官能化的中孔分子筛的合成及催化应用

近年来 ,通过对介孔分子筛 (如 MCM,HMS,MSU-X)结构及组成的化学“裁剪”,制备具有特定结构和表面性质的催化材料成为该领域的研究热点之一 [1～ 5] .许多文献报道了 MCM-4 1的有机官能化中孔材料的制备技术 [5～ 8] ,并将其应用于有机合成反应 ,取得了较好的结果 [7,8] .其中 MSU-X介孔分子筛结构具有三维排列“Worm-like”孔道特征 ,有利于物料传输 ;相对于 MCM-4 1分子筛在合成方面具有以中性表面活性剂作模板剂且模板剂容易去除等诸多优点[9] .本文采用非离子表面活性剂 C11— 15H2 3— 31(CH2 CH2 O) 9H(AEO9)为模板剂 ,…     

Photochromism and hydrolysis of aromatic Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (BSP) studied in heterogeneous environments

A photochromic symmetric Schiff base, N,N′-bis(salicylidene)-p-phenylenediamine has been studied by means of stationary spectroscopic absorption and emission techniques in the IR and UV-vis spectral range in heterogeneous environments: microporous and mesoporous molecular sieves and micellar systems. The intermolecular hydrogen bonds between the molecule studied and silanol groups in mesoporous material have led initially to the stabilization of the cis-keto tautomer and later to a very effective hydrolysis. Persisting two-step color changes have been found to occur after the UV irradiation of the molecule studied encapsulated in microporous and mesoporous molecular sieves.     

MSU-x介孔分子筛的改性研究

以脂肪醇聚氧乙烯醚为模板剂,正硅酸乙酯为Si源,分别以偏钨酸铵,硫酸铝作为W源和Al源进行改性,合成出W-MSU-x以及Al-MSU-x介孔分子筛.并且通过X射线扫描、N_2吸附-脱附、原位红外表征考察W和Al的加入对介孔分子筛的影响.结果得到,W的加入提高了分子筛的有序度,Al的加入使介孔分子筛的孔径减小,比表面积增大.     

杂原子介孔MCM-41分子筛的制备及其对含喹啉模拟柴油的吸附脱氮性能

制备了介孔MCM-41分子筛和三种杂原子(Zn、Ba和Ce)介孔MCM-41分子筛,通过X射线衍射(XRD)、红外光谱(FT-IR)、低温N_2吸附-脱附等手段对其进行表征,研究了几种介孔分子筛对氮含量为1732μg/g含喹啉模拟柴油的吸附脱氮性能。结果表明,所制备的几种分子筛均具有典型的介孔结构,且杂原子已进入到分子筛骨架中。利用Materials Studio软件构建介孔分子筛模型,模拟的XRD谱图与实验结果基本相符;进一步模拟了喹啉分子在杂原子介孔分子筛团簇上的吸附,计算了吸附能及被吸附分子和吸附中心的距离(d_((N-M)))。几种分子筛的吸附脱氮性能顺序依次为Zn-MCM-41 Ce-MCM-41 Ba-MCM-41 MCM-41;Zn-MCM-41的吸附性能最好,吸附能最大,吸附分子和吸附中心的距离d_((N-M))最小。吸附时间对杂原子介孔分子筛的吸附脱氮性能具有较大影响,而吸附温度的影响相对较小;Zn-MCM-41、Ba-MCM-41和Ce-MCM-41分子筛的最佳吸附时间分别为40、10和30 min,最佳吸附温度分别为40、30和40℃。     

乙二胺基和2,4-戊二酮官能化介孔分子筛固载钼(VI):新型的环己烯环氧化催化剂

通过对介孔分子筛HMS和MCM 41表面修饰 ,将乙二胺基和 2 ,4 戊二酮引入到介孔分子筛孔道内 ,制备出乙二胺基和戊二酮官能化介孔分子筛 .首次将烯烃环氧化均相催化剂MoO2 (acac) 2 固载到乙二胺基和戊二酮官能化介孔分子筛孔道内 ,制备出新型的、易回收、可重复使用的烯烃环氧化多相催化剂 .环己烯催化环氧化表明 ,该催化剂的催化活性与均相催化剂MoO2 (acac) 2 相当 ,选择性大于 80 %.