Preparation of aryl azides of aryl boronic acids and one-pot synthesis of 1,4-diaryl-1,2,3-triazoles by a magnetic cysteine functionalized GO–CuI/II nanocomposite

A mixed Cu^I/Cu^IIcatalyst based on magnetic cysteine functionalized graphene oxide (Cu^I/II@Cys-MGO) was prepared and used for the azidonation reaction of aryl boronic acids and one-pot synthesis of 1,4-diaryl −1,2,3-triazoles. Aryl azides were obtained in good yields and short reaction times via cross-coupling of aryl boronic acids with sodium azide in the presence of Cu^II catalytic species in this catalytic system. The azide-alkyne cycloaddition reaction was catalyzed by CuI catalytic species in Cu^I/^II@Cys-MGO nanocomposite.     

Dichloroimidazolidinedione-activated one-pot Suzuki–Miyaura cross-coupling of phenols

The first general method for the Suzuki-type cross-coupling of phenols with aryl boronic acids using dichloroimidazolidinedione (DCID) as a new reagent is presented. In the presence of DCID and Pd/metal–organic framework (MOF), coupling of aryl boronic acids with a wide range of phenols, was carried out smoothly in tetrahydrofuran (THF) at reflux conditions to afford the cross-coupling products in good to excellent yields. The structures of all compounds were corroborated by ¹H- and ¹³C-NMR. A plausible mechanism for this type of reaction is proposed.     

Synthesis of 3-aryl-4-chalcogen-2H-benzopyrans from 3-iodo-4-chalcogen-2H-benzopyrans using a Suzuki cross-coupling

The Suzuki cross-coupling reaction of 3-iodo-4-chalcogen-2H-benzopyran derivatives with a variety of organoboron compounds in the presence of catalytic amount of palladium salt is described. This cross-coupling reaction proceeded cleanly and was performed with aryl boronic acids bearing electron-withdrawing, electron-donating, and neutral substituents, furnishing the corresponding products in moderate to good yields.     

Decarboxylative Conjunctive Cross-coupling of Vinyl Boronic Esters using Metallaphotoredox Catalysis

The synthesis of complex alkyl boronic esters through conjunctive cross-coupling of vinyl boronic esters with carboxylic acids and aryl iodides is described. The reaction proceeds under mild metallaphotoredox conditions and involves an unprecedented decarboxylative radical addition/cross-coupling cascade of vinyl boronic esters. Excellent functional-group tolerance is displayed, and application of a range of carboxylic acids, including secondary α-amino acids, and aryl iodides provides efficient access to highly functionalized alkyl boronic esters. The decarboxylative conjunctive cross-coupling was also applied to the synthesis of sedum alkaloids.     

Microwave-assisted Suzuki reaction catalyzed by Pd(0)-PVP nanoparticles

Suzuki cross-coupling reaction was successfully carried out in ethanol utilizing a palladium colloidal solution stabilized by polyvinylpyrrolidone (PVP). High isolated yields (75-97%) to biaryls were obtained using different bases, aryl halides, and aryl boronic acids with a small loading of the palladium catalyst. Pd(0)-PVP nanoparticles with 3-6 nm of medium diameter were prepared from Pd(OAc)₂ in the presence of the stabilizer PVP using methanol as the reducing agent.     

First synthesis of beta-keto sulfoxides by a palladium-catalyzed carbonylative Suzuki reaction

[reaction: see text] An unprecedented palladium-catalyzed three-component cross-coupling reaction between alpha-bromo sulfoxide, carbon monoxide, and aromatic boronic acids provides a new and efficient approach to the synthesis of beta-ketosulfoxides. The reaction takes place under mild conditions with a wide range of variously substituted aryl and heteroaryl boronic acids. The carbonylative cross-coupling reaction is strongly favored over competing direct cross-coupling and homocoupling processes, except with boronic acids carrying strong electron-withdrawing substituents.     

Scyllo-inositol as a convenient protecting group for aryl boronic acids in Suzuki–Miyaura cross-coupling reactions

Herein, we report air- and water-stable borate complexes between scyllo-inositol and aryl boronic acids. The complexes were less reactive than free aryl boronic acids under Suzuki–Miyaura cross-coupling reaction conditions; thus, the borate complexes were used as protected boronic acids. Although protecting groups for organoboronic acids are useful in coupling reactions, especially those used to produce π-conjugated molecules, only a few reports describing the use of protecting groups for boronic acids have been published. The proposed unique structural borate complex provides a novel protective method for aryl boronic acids.     

Copper-mediated cross-coupling of aryl boronic acids and alkyl thiols

[reaction: see text] The cross-coupling of aryl boronic acids and alkanethiols mediated by copper(II) acetate and pyridine in anhydrous dimethylformamide affords aryl alkyl sulfides in good yield with a wide variety of substituted aryl boronic acids. The method is applicable to the synthesis of aryl sulfides of cysteine.     

Rapid room temperature Buchwald-Hartwig and Suzuki-Miyaura couplings of heteroaromatic compounds employing low catalyst loadings

The use of second-generation [(NHC)Pd(R-allyl)Cl] complexes for Suzuki-Miyaura and Buchwald-Hartwig cross-coupling reactions involving heteroaromatic halides at room temperature is reported. The first examples of room temperature Suzuki-Miyaura cross-coupling of deactivated aryl chlorides with alkenyl boronic acids are also disclosed. Terminal substitution at the allyl moiety of the palladium complex facilitates its activation at room temperature leading to very active catalytic species enabling the present catalytic transformations to be performed rapidly using very mild reaction conditions. Catalyst loadings can be as low as 10 ppm for the Buchwald-Hartwig aryl amination and 50 ppm for the Suzuki-Miyaura reaction.     

Unexpected C-Se cross-coupling reaction: copper oxide catalyzed synthesis of symmetrical diaryl selenides via cascade reaction of selenourea with aryl halides/boronic acids

Selenourea is used as an effective selenium surrogate in the C-Se cross-coupling reaction catalyzed by copper oxide nanoparticles under ligand free conditions. This protocol has been utilized for the synthesis of a variety of symmetrical diaryl selenides in good to excellent yields from the readily available aryl halides/boronic acids.     

Microwave-promoted cross-coupling of acid chlorides with arylboronic acids: a convenient method for preparing aromatic ketones

Simple catalytic systems for cross-coupling reactions of acyl chlorides with arylboronic acids under microwave conditions were tested. Microwave irradiation facilitated the reaction course. Mild reaction conditions afford the symmetrical and unsymmetrical aryl ketones in reasonable to high yields within a short time. A wide range of substrates bearing an electron-donating or an electron-withdrawing substituent on aryl ring of acid chloride as well as on boronic acid were examined and high yields of ketones were produced.     

Palladium on carbon as a precatalyst for the Suzuki-Miyuara cross-coupling of aryl chlorides

Palladium on carbon is used as a precatalyst for Suzuki-Miyaura reaction of aryl chlorides and aryl boronic acids. An efficient catalyst system is obtained that allows the reaction of substrates that are difficult to couple under ligand free conditions. This includes electron rich and sterically hindered aryl chlorides as well as electron deficient and sterically hindered boronic acids. We have discovered that the amount of ligand needed to catalyze these reactions can be significantly decreased by incorporating an incubation period. This study also provides valuable insight into the mechanism of the Pd/C-catalyzed Suzuki-Miyaura cross-coupling. For example, mercury poisoning studies provide evidence that the active catalytic species is homogeneous. However, catalyst reuse and low metal contamination indicate that this system retains many of the advantages of a heterogeneous catalyst. From these results, a catalytic cycle is proposed.     

Unprecedented palladium-catalyzed cross-coupling reaction of alpha-bromo sulfoxides with boronic acids

[reaction: see text] A new Suzuki-type palladium-catalyzed reaction of boronic acids with alpha-bromo sulfoxides has been developed using a protocol similar to the well-documented reaction of boronic acids with aryl halides. Both cross-coupling and homocoupling processes were observed. The best yields in cross-coupling products were obtained when the presence of oxygen was carefully excluded using degassed solvents. The oxidative addition palladium complex intermediate could be isolated and characterized by X-ray single-crystal diffraction.     

Novel class of tertiary phosphine ligands based on a phospha-adamantane framework and use in the Suzuki cross-coupling reactions of aryl halides under mild conditions

[reaction: see text] A new class of sterically hindered phosphines based on a phospha-adamantane framework is described. Arylation or alkylation of the 1,3,5,7-tetramethyl-2,4,8-trioxa-6-phospha-adamantane system allows for the preparation of tertiary phosphines suitable for use in palladium-catalyzed cross-coupling reactions. For example, use of a catalytic system incorporating Pd(2)(dba)(3) and 1,3,5,7-tetramethyl-2,4,8-trioxa-6-phenyl-6-phospha-adamantane is shown to promote the Suzuki cross-coupling of aryl iodides, bromides, and activated chlorides with a variety of aryl boronic acids at room temperature in a few hours with high yields.     

Palladium-catalyzed, direct boronic acid synthesis from aryl chlorides: a simplified route to diverse boronate ester derivatives

Although much current research focuses on developing new boron reagents and identifying robust catalytic systems for the cross-coupling of these reagents, the fundamental preparations of the nucleophilic partners (i.e., boronic acids and derivatives) has been studied to a lesser extent. Most current methods to access boronic acids are indirect and require harsh conditions or expensive reagents. A simple and efficient palladium-catalyzed, direct synthesis of arylboronic acids from the corresponding aryl chlorides using an underutilized reagent, tetrahydroxydiboron B(2)(OH)(4), is reported. To ensure preservation of the carbon-boron bond, the boronic acids were efficiently converted to the trifluoroborate derivatives in good to excellent yields without the use of a workup or isolation. Further, the intermediate boronic acids can be easily converted to a wide range of useful boronates. Finally, a two-step, one-pot method was developed to couple two aryl chlorides efficiently in a Suzuki-Miyaura-type reaction.     

Oxidative cross-coupling of allyl(trimethyl)silanes with aryl boronic acids by palladium catalysis

The first oxidative cross-coupling of allylsilanes with aryl boronic acids has been developed by palladium catalysis. The reaction between β-substituted allyl(trimethyl)silanes and a wide range of aryl boronic acids afforded allylarenes in moderate to good yields and excellent selectivity. On the basis of experimental results and literature reports, it was suggested that the reaction might start from transmetalation of aryl boronic acid with AgOAc followed by transmetalation with Pd(II) to give an arylpalladium acetate complex as a key intermediate. This intermediate underwent either electrophilic addition/desilylation or transmetalation with allylsilane and subsequent reductive elimination to give the final product.     

Chitosan-supported palladium(0) catalyst for microwave-prompted Suzuki cross-coupling reaction in water

A chitosan-supported palladium (Pd) (0) catalyst was prepared by simple adsorption of palladium(II) ion onto chitosan beads and a subsequent reduction process. To maintain mechanical stability, the chitosan-supported palladium(0) catalyst was cross-linked with either glutaraldehyde or diglycidyl ether polyethylene glycol. The catalysts were utilized for the Suzuki cross-coupling reaction in water. The catalyst, in the presence of a tetrabutylammonium bromide (TBAB) additive, showed excellent catalytic activity in microwave-prompted Suzuki cross-coupling reactions using various aryl halides and boronic acids. In addition, the catalyst was successfully reused up to five times without significant loss of catalytic activity.     

Highly effective activation of aryl chlorides for Suzuki coupling in aqueous media using a ferrocene-based Pd(II)–diimine catalyst

The Suzuki coupling of aryl chlorides with boronic acids using a ferrocene-containing Pd(II)–diimine complex as catalyst, in aqueous media, under microwave heating is reported. A small amount of the catalyst (0.1%) was found to be highly effective for coupling unactivated aryl chlorides with boronic acids to form sterically hindered ortho-substituted biaryls. The same catalyst also enabled the coupling of aryl bromides and iodides with various boronic acids in very high yields. The catalyst is air stable and the catalytic reaction can be completed in 15 min.     

Synthesis of diarylmethane derivatives from Pd-catalyzed cross-coupling reactions of benzylic halides with arylboronic acids

A simple catalyst precursor prepared in situ from palladium acetate and triphenylphosphine shows high activity for the Suzuki cross-coupling reaction of benzylic bromides and chlorides with aryl boronic acids. The reaction can be carried out at low catalyst loading (0.002-1 mol%) and under mild conditions (room temperature to 80 °C) furnishing diarylmethane derivatives in high yields (86-99%).     

Nickel-Catalyzed 1,2-Diarylation of Alkenyl Carboxylates: A Gateway to 1,2,3-Trifunctionalized Building Blocks

A nickel-catalyzed conjunctive cross-coupling of alkenyl carboxylic acids, aryl iodides, and aryl/alkenyl boronic esters is reported. The reaction delivers the desired 1,2-diarylated and 1,2-arylalkenylated products with excellent regiocontrol. To demonstrate the synthetic utility of the method, a representative product is prepared on gram scale and then diversified to eight 1,2,3-trifunctionalized building blocks using two-electron and one-electron logic. Using this method, three routes toward bioactive molecules are improved in terms of yield and/or step count. This method represents the first example of catalytic 1,2-diarylation of an alkene directed by a native carboxylate group.