Comparative Investigation of the Ionicity of Aprotic and Protic Ionic Liquids in Molecular Solvents by using Conductometry and NMR Spectroscopy

Electrical conductivity (σ), viscosity (η), and self‐diffusion coefficient (D) measurements of binary mixtures of aprotic and protic imidazolium‐based ionic liquids with water, dimethyl sulfoxide, and ethylene glycol were measured from 293.15 to 323.15 K. The temperature dependence study reveals typical Arrhenius behavior. The ionicities of aprotic ionic liquids were observed to be higher than those of protic ionic liquids in these solvents. The aprotic ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate, [bmIm][BF₄], displays 100 % ionicity in both water and ethylene glycol. The protic ionic liquids in both water and ethylene glycol are classed as good ionic candidates, whereas in DMSO they are classed as having a poor ionic nature. The solvation dynamics of the ionic species of the ionic liquids are illustrated on the basis of the ¹H NMR chemical shifts of the ionic liquids. The self‐diffusion coefficients D of the cation and anion of [HmIm][CH₃COO] in D₂O and in [D₆]DMSO are determined by using ¹H nuclei with pulsed field gradient spin‐echo NMR spectroscopy.     

Structural and thermal characterization of sugarcane bagasse cellulose succinates prepared in ionic liquid

The chemical modification of SCB cellulose with succinic anhydride using 1-butyl-3-methylimidazolium chloride ionic liquid/DMSO system as reaction medium was studied. The parameters including the molar ratio of succinic anhydride/anhydroglucose units in cellulose from 1:1 to 12:1, reaction time 5-120 min, and reaction temperature 85-105 °C were investigated. The results showed that the degree substitution of succinylated cellulosic preparations ranged from 0.037 to 0.53. It was found that the treatment of the native cellulose in the ionic liquid/DMSO system under the conditions given significantly degraded the cellulose and completely destroyed the cellulose crystals. FT-IR and solid-state CP/MAS ¹³C NMR spectra produced evidence for succinoylation reaction and the results showed that succinoylation occurred at positions C-6, C-2 and C-3. The thermal stability of the succinylated cellulose decreased upon chemical modification.     

Room-Temperature Ionic Liquid–DMSO Promoted and Improved One-Pot Synthesis of 5,6-Diaryl-1,2,4-triazines

An improved and rapid one-pot synthesis of 5,6-diarylsubstituted-1,2,4-triazines in a mixture of room-temperature ionic liquid 1,3-dibutylimidazolium bromide [Bbim]⁺Br^? and dimethylsulfoxide (DMSO) is described without the need for any added catalyst. Different polar aprotic solvents were screened along with ionic liquids and a synergistic effect with DMSO has been found. The predominance of one regioisomer over the other has also been studied with varying reaction temperatures. The one-pot methodology leading to excellent isolated yields in short span of time is achieved by simple workup procedure. The ionic liquid was efficiently recovered and reused three times without the loss of catalysis. All the compounds were characterized by infrared, NMR, mass spectrometry, and elemental analysis.     

A Rapid and Facile Esterification of Na-Carboxylates with Alkyl Halides Promoted by the Synergy of the Combined Use of DMSO and an Ionic Liquid Under Ambient Conditions

The synergy of the combined use of DMSO and an ionic liquid viz. (bbim)⁺Br^? has brought about a rapid and efficient esterification of sodium carboxylates with acyl and alkyl halides under ambient conditions in excellent isolated yields (90–95%) in short reaction times (12–40 min).     

Preparation of ionic liquids bearing o-carborane anion via N,N′-dialkylimidazol-2-ylidene carbene

In the present study, a novel ionic liquid including o-carborane anion was prepared. After the carbene formation of 1-ethyl-3-methylimidazolium halide ([EMIm]⁺[X]⁻) by reaction with n-BuLi, the subsequent reaction with o-carborane afforded the desired ionic liquid in moderate yields. The structure of the ionic liquid was supported by ¹H NMR and ¹¹B NMR spectra.     

Cellulose Dissolution in Mixtures of Ionic Liquids and Dimethyl Sulfoxide: A Quantitative Assessment of the Relative Importance of Temperature and Composition of the Binary Solvent

We studied the dissolution of microcrystalline cellulose (MCC) in binary mixtures of dimethyl sulfoxide (DMSO) and the ionic liquids: allylbenzyldimethylammonium acetate; 1-(2-methoxyethyl)-3-methylimidazolium acetate; 1,8-diazabicyclo [5.4.0]undec-7-ene-8-ium acetate; tetramethylguanidinium acetate. Using chemometrics, we determined the dependence of the mass fraction (in %) of dissolved cellulose (MCC-m%) on the temperature, T = 40, 60, and 80 °C, and the mole fraction of DMSO, χ_DMSO = 0.4, 0.6, and 0.8. We derived equations that quantified the dependence of MCC-m% on T and χ_DMSO. Cellulose dissolution increased as a function of increasing both variables; the contribution of χ_DMSO was larger than that of T in some cases. Solvent empirical polarity was qualitatively employed to rationalize the cellulose dissolution efficiency of the solvent. Using the solvatochromic probe 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (WB), we calculated the empirical polarity E_T(WB) of cellobiose (a model for MCC) in ionic liquid (IL)–DMSO mixtures. The E_T(WB) correlated perfectly with T (fixed χ_DMSO) and with χ_DMSO (fixed T). These results show that there is ground for using medium empirical polarity to assess cellulose dissolution efficiency. We calculated values of MCC-m% under conditions other than those employed to generate the statistical model and determined the corresponding MCC-m% experimentally. The excellent agreement between both values shows the robustness of the statistical model and the usefulness of our approach to predict cellulose dissolution, thus saving time, labor, and material.     

Synthesis of rhodium N-heterocyclic carbene complexes and their catalytic activity in the hydrosilylation of alkenes in ionic liquid medium

Rhodium complexes bearing N-heterocyclic carbene (NHC) ligands were prepared from bis(η⁴-1,5-cyclooctadiene) dichlorodirhodium and 1-alkyl-3-methylimidazolium-2-carboxylate, and the catalytic properties of rhodium complexes prepared in the hydrosilylation of alkenes in ionic liquid media were investigated. It was found that both the catalytic activity and selectivity of the rhodium complexes bearing NHC ligands were influenced by the attached substituents of the imidazolium cation. Additionally, rhodium complexes bearing NHC ligands in ionic liquid BMimPF₆ could be reused without noticeable loss of catalytic activity and selectivity.     

Swelling behavior of strong polyelectrolyte poly(N-t-butylacrylamide-co-acrylamide) hydrogels

Temperature-sensitive ionic hydrogels based on N-t-butylacrylamide (TBA), acrylamide (AAm), 2-acrylamido-2-methylpropane sulfonic acid sodium salt (AMPS) and N,N^′-methylenebis(acrylamide) (BAAm) monomers were prepared. The molar ratio of TBA to the monomers AAm and AMPS was fixed at 60/40, while the AMPS content of the hydrogels was varied. The elastic modulus of the hydrogels was in the range of 347-447 Pa, much lower than the modulus of PAAm or poly(N-isopropylacrylamide) hydrogels due to the reduced crosslinking efficiency of BAAm in TBA/AAm copolymerization. The hydrogels exhibited swelling-deswelling transition in water depending on the temperature. Increasing ionic group (AMPS) content resulted in shifting of the transition temperature interval in which the deswelling takes place. The higher the ionic group content, the broader the temperature interval at the phase transition. Ionic hydrogels exhibited first-order reentrant conformational transitions in ethanol-water and in dimethylsulfoxide (DMSO)-water mixtures. The higher the ionic group content of the hydrogels the narrower the ethanol (or DMSO) range in which the reentrant phenomena occur. By taking into account the difference of the solvent mixture composition inside and outside the gel, the equilibrium swelling theory provided a satisfactory agreement to the experimental swelling data of the hydrogels immersed in the solvent mixtures.     

Temperature-controlled ionic liquid-liquid-phase microextraction for the pre-concentration of lead from environmental samples prior to flame atomic absorption spectrometry

Hydrophobic ionic liquid could be dispersed into infinite droplets under driving of high temperature, and then they can aggregate as big droplets at low temperature. Based on this phenomenon a new liquid-phase microextraction for the pre-concentration of lead was developed. In this experiment, lead was transferred into its complex using dithizone as chelating agent, and then entered into the infinite ionic liquid drops at high temperature. After cooled with ice-water bath and centrifuged, lead complex was enriched in the ionic liquid droplets. Important parameters affected the extraction efficiency had been investigated including the pH of working solution, amount of chelating agent, volume of ionic liquid, extraction time, centrifugation time, and temperature, etc. The results showed that the usually coexisting ions containing in water samples had no obvious negative effect on the recovery of lead. The experimental results indicated that the proposed method had a good linearity (R = 0.9951) from 10 ng mL⁻¹ to 200 ng mL⁻¹. The precision was 4.4% (RSD, n = 6) and the detection limit was 9.5 ng mL⁻¹. This novel method was validated by determination of lead in four real environmental samples for the applicability and the results showed that the proposed method was excellent for the future use and the recoveries were in the range of 94.8-104.1%.     

Novel functionalized ionic liquid with a sulfur atom in the aliphatic side chain of the pyrrolidinium cation

A novel ionic liquid, never reported in literature until now, was properly designed, synthesized and preliminary investigated. This material was prepared combining the N-methylpyrrolidinium cation (PYR_1(2S1))⁺, exhibiting a sulfur atom in the alkyl side chain, with the bis(trifluoromethanesulfonyl)imide anion, (TFSI)⁻, to be addressed as safer electrolyte component for sulfur-based battery systems. The presence of sulfur within the cation side chain was found to prevent the crystallization of the ionic liquid even in the presence of lithium salt. Cyclic voltammetries have clearly indicated that Li⁺ cation exhibits good mobility and is reversibly plated/stripped in PYR_1(2S1)TFSI–LiTFSI electrolytes with high efficiency.     

Substitution reactions in ionic liquids. A kinetic study

The rate of the substitution reaction of (R)-3-chloro-3,7-dimethyloctane (1) with either methanol or benzyl alcohol in mixtures containing the ionic liquid [Bmim][N(CF₃SO₂)₂] was monitored using ³⁵Cl NMR spectroscopy. The enantiomeric excess of the product, (S)-3-methoxy-3,7-dimethyloctane (2a), was analyzed using chiral gas chromatography. This product showed a decreasing enantiomeric excess with increasing concentration of ionic liquid. The rate of reaction of substrate 1 in each case varied with the concentration of the ionic liquid. Polarity measurements of the solvent mixtures were undertaken by standard methods, which are compared both to each other and to the observed rates. Solvent reorganization and selective solvation are also each proposed as contributing to the difference in the observed rates of reaction.     

Synthesis of a novel bifunctional oxyammonium-based ionic liquid: Application for the synthesis of pyrano[4,3-b]pyrans and tetrahydrobenzo[b]pyrans

In the present investigation, a novel bifunctional oxyammonium-based ionic liquid, namely, 2,2′-(ethane-1,2-diylbis[oxy])bis(ethan-1-aminium)-2,2,2-trifluoroacetate, was designed and synthesized. The structure of the titled ionic liquid was characterized using Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (¹HNMR), carbon nuclear magnetic resonance (¹³CNMR), fluorine nuclear magnetic resonance (¹⁹FNMR), homonuclear COSY nuclear magnetic resonance (NMR), thermogravimetry (TG), derivative thermogravimetry (DTG) analysis, X-ray diffraction patterns (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The described ionic liquid demonstrated robust catalytic performance in the synthesis of pyrano[4,3-b]pyrans and tetrahydrobenzo[b]pyran derivatives. The ionic liquid presents a high potential of recycling and reusing capability in both types of model reactions.     

A theoretical study of the limits of the acidity of carbon acids in phase transfer catalysis in water and in liquid ammonia

The acidities of a large number of carbon acids have been theoretically calculated for the gas-phase and for DMSO solution. The gas-phase values, both ΔH and ΔG, are very well correlated with the available experimental data. From the calculated ΔG values in DMSO and the pKas in the same solvent, a homogeneous set of pK _a (DMSO) values was devised that was used to generate pK _a (water). These last pK _as were used to establish the limits of the acidity of carbon acids for reactions under PTC conditions both alkylations and H/D exchange. A step further led to the pK _as in liquid ammonia and from them to the virtual use of PTC using liquid ammonia instead of water.      

Mechanistic studies on the formation of Pt(II) hydroformylation catalysts in imidazolium-based ionic liquids

The kinetics of the formation of the active species cis-[Pt^II(PPh₃)₂Cl(SnCl₃)] and cis-[Pt^II(PPh₃)₂(SnCl₃)₂] from the hydroformylation catalyst precursor cis-[Pt^II(PPh₃)₂Cl₂] in the presence of SnCl₂, was studied in two different imidazolium-based ionic liquids. A large range of different chlorostannate melts consisting of 1-butyl-3-methyl-imidazolium cations and [Sn_xCl_y]^{(−y + 2x)} anions with varying molar fraction of SnCl₂, were prepared and characterized by ¹H and ¹¹⁹Sn NMR. The observed chemical shifts point to major changes in the composition of the anionic species within the melt. The second ionic liquid employed, viz., 1-butyl-3-methyl-imidazolium-bis(trifluormethylsulfonyl)amide was prepared in a colorless quality that enabled its application in kinetic studies. The concentration and temperature dependence of the substitution of Cl⁻ by [SnCl₃]⁻ to yield cis-[Pt^II(PPh₃)₂Cl(SnCl₃)], could be studied in detail. Theoretical (DFT) calculations were employed to model the reaction progress and to resolve the role of the ionic liquid in the activation of the catalyst. The available results are presented and a plausible mechanism for the formation of the catalytically active species is suggested.     

Ultratrace determination of carbamate pesticides in water samples by temperature controlled ionic liquid dispersive liquid phase microextraction combined with high performance liquid phase chromatography

A simple and sensitive method was developed for the determination of three carbamate pesticides in water samples. It is based on temperature controlled ionic liquid dispersive liquid phase microextraction combined with high-performance liquid chromatography. The ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate was used as the extractant, and the factors affecting the extraction were investigated in detail. The detection limits obtained for isoprocarb, diethofencarb and fenothiocarb are 0.91, 0.45, and 1.40 μgL^-1, respectively, and the precisions are in the range between 1.0 and 1.8% (n?=?6). The method was validated with environmental water samples and the results indicate that it represents a viable alternative to existing methods.

Ionic liquid promoted synthesis of heterocycle-fused pyrimidine-2,4(1H,3H)-diones utilising CO2

An efficient ionic liquid system was developed for the preparation of various heterocycle-fused pyrimidine-2, 4(1H,3H)-diones in moderate to excellent yields (52–95%). It was found that [HDBN⁺][TFE^?], a simple and easily prepared ionic liquid, could act as both the solvent and reaction promoter, and that the reactions could be efficiently carried out at atmospheric pressures of CO₂.     

Ionic liquid 1-(3-Trimethoxysilylpropyl)-3-methylimidazolium nitrite as a new reagent for the efficient diazotization of aniline derivatives and in situ synthesis of azo dyes

A new ionic liquid 1-(3-trimethoxysilylpropyl)-3-methylimidazolium nitrite was synthesized. This ionic liquid was used as a convenient nitrosonium source in diazotization of arylamines into their corresponding diazonium salts which were converted into their related azo dyes via the in situ azo-coupling with aniline derivatives or phenolic compounds. The diazotization of anilines in this ionic liquid and subsequent azo-coupling generated the related azo dyes in good to excellent yields at 0?C5 °C in short reaction times via a simple experimental procedure.     

Orthogonal array optimization of ionic liquid based dispersive liquid-liquid microextraction for toxic anilines in foods

A simple and rapid method of ionic liquid based dispersive liquid-liquid microextraction(DLLME) combining with high performance liquid chromatography(HPLC) was developed for the analysis of four toxic anilines in flour steamed bread and maize steamed bread.Several possible influential factors such as the type of ionic liquid and disperser solvent,extraction time,sample pH,ionic strength and the volume of ionic liquid and disperser solvent were optimized using single factor experiments and orthogonal array design(OAD) with OA 25(5 4) matrix.Analysis of variance(ANOVA) and percent contribution(PC) were used to investigate the significance of the factors of OAD.Sample pH and ionic strength are statistically demonstrated two chief factors.Under the optimum condition,the method exhibits a good linearity(r 2 > 0.99) over the studied range(50-1000 ng g 1) for anilines.The extraction factors and recoveries for the anilines in two kinds of steamed breads ranged between 34.1%-73.3% and 44.3%-95.3%,respectively.The limit of detections(LODs) and limit of quantitations(LOQs) ranged between 10-15 ng g 1 and 30-45 ng g-1.     

Radiosynthesis of 10-(2-[18F]fluoroethoxy)-20(S)-camptothecin as a potential positron emission tomography tracer for the imaging of topoisomerase I in cancers

The preparation of 10-(2-[¹⁸F]fluoroethoxy)-20(S)-camptothecin, a potential positron emission tomography tracer for the imaging of topoisomerase I in cancers, is described. 10-(2-[¹⁸F]Fluoroethoxy)-20(S)-camptothecin was synthesized by the [¹⁸F]fluoroalkylation of the corresponding hydroxy precursor molecule with 2-[¹⁸F]fluoroethyl bromide ([¹⁸F]FEtBr) in dimethylsulfoxide (DMSO) at 55 °C for 20 min; this was followed by purification using high performance liquid chromatography (HPLC) with a total preparation time of 60 min. The overall radiochemical yield was approximately 5.4–12 % (uncorrected), and the radiochemical purity was above 96 %.