Essential structure of co-pigment for blue sepal-color development of hydrangea

Blue sepal-color of Hydrangea macrophylla might be due to a supramolecular metal-complex pigment consisting of delphinidin 3-glucoside (1), co-pigments (5-O-caffeoylquinic acid (2), and/or 5-O-p-coumaroylquinic acid (3)) and Al³⁺ in an aqueous solution around pH 4.0. To clarify the mechanism of blue sepal-color development of hydrangea, we tried to reproduce the blue color in vitro by mixing 1 with designed synthetic co-pigments in the presence of Al³⁺ at pH 4.0. We at first succeeded in clarifying the essential functional structure in the co-pigment that could form the stable blue solution. Here, we present the structure of the blue pigment caused by an Al-complex coordinating of 1 at ortho-dihydroxyl groups of the B-ring, 1-hydroxy, 1-carboxylic acid, and the carbonyl residue in the ester at 5-position of 2 and/or 3. The hydrophobic interaction between the aromatic acyl residue at 5-position and the nucleus of 1 may also contribute to stabilize the complex.     

Linear Schiff-base fluorescence probe with aggregation-induced emission characteristics for Al detection and its application in live cell imaging

A simple Schiff-base derivative with salicylaldehyde moieties as fluorescent probe 1 was reported by aggregation-induced emission (AIE) characterization for the detection of metal ions. Spectral analysis revealed that probe 1 was highly selective and sensitive to Al³⁺. The probe 1 was also subject to minimal interference from other common competitive metal ions. The detection limit of Al³⁺ was 0.4 μM, which is considerably lower than the World Health Organization standard (7.41 μM), and the acceptable level of Al³⁺ (1.85 μM) in drinking water. The Job's plot and the results of ¹H-NMR and FT-IR analyses indicated that the binding stoichiometry ratio of probe 1 to Al³⁺ was 1:2. Probe 1 demonstrated a fluorescence-enhanced response upon binding with Al³⁺ based on AIE characterization. This response was due to the restricted molecular rotation and increased rigidity of the molecular assembly. Probe 1 exhibited good biocompatibility, and Al³⁺ was detected in live cells. Therefore, probe 1 is a promising fluorescence probe for Al³⁺ detection in the environment.     

A novel pyrenyl-appended tricalix[4]arene for fluorescence-sensing of Al(III)

In acetonitrile, the tren-N-tricalix[4]arene 4 with three appended pyrenyl groups showed an enhanced fluorescence in the presence of Al³⁺ and, to a lesser extent, of In³⁺. Compound 4 was shown to form a 1:1 complex with Al³⁺, the metal cation being located in the tren part. The association constant (K_a) of 4 for the Al³⁺ cation was calculated to be 8.7×10³ M⁻¹ in acetonitrile.     

Solvent-dependent chromogenic sensing for Cu and fluorogenic sensing for Zn and Al: a multifunctional chemosensor with dual-mode

A new multifunctional chemosensor 1 was synthesized and characterized by spectroscopic tools along with a single crystal X-ray crystallography. It can exhibit selective recognition responses toward Cu²⁺, Zn²⁺ and Al³⁺ in different solvent systems with bimodal methods (colorimetric and fluorescence). This sensor 1 detected Cu²⁺ ions through a distinct color change from colorless to yellow in aqueous solution. Interestingly, the receptor 1 was found to be reversible by EDTA. The detection limit (11 μM) of 1 for Cu²⁺ is much lower than WHO guideline (30 μM) in drinking water. In addition, the sensor 1 showed significant fluorescence enhancements in the presence of Zn²⁺ ion and Al³⁺ ion in two different organic solvents (DMF and MeCN), respectively. The binding modes of the three complexes were determined to be a 1:1 complexation stoichiometry through Job plot, ESI-mass spectrometry analysis, and ¹H NMR titration.     

A novel chromatism switcher with double receptors selectively for Ag in neutral aqueous solution: 4,5-diaminoalkeneamino-N-alkyl-l,8-naphthalimides

Two novel fluorosensors of 4,5-disubstituted-N-alkyl-l,8-naphthalimide derivatives (H1, H2, H3) with double ethylenediamino receptors, double propylenediamino receptors, or one methylpiperazine receptor were synthesized, respectively. Their fluorescence and absorption in the presence or absence of nine metal ions were studied. In the presence of Ag⁺, H1's absorption moved to long wavelength with color change from yellow-green to red, its quenching and red shift in fluorescence were also remarkable. Similarly, H1's fluorescence was also strongly quenched in the presence of Cu²⁺. In addition, H1 and H2 show high pH sensitively. There was 139-folds fluorescence enhancement for H1, 22-folds for H2, and 4-folds for H3 when pH was changed from 8 to 3, respectively.     

Exploiting the deprotonation mechanism for the design of ratiometric and colorimetric Zn fluorescent chemosensor with a large red-shift in emission

The design, synthesis, and photophysical evaluation of a new naphthalimide-based fluorescent chemosensor, N-butyl-4-[di-(2-picolyl)amino]-5-(2-picolyl)amino-1,8-naphthalimide (1), were described for the detection of Zn²⁺ in aqueous acetonitrile solution at pH 7.0. Probe 1 showed absorption at 451 nm and a strong fluorescence emission at 537 nm (Φ_F=0.33). The capture of Zn²⁺ by the receptor resulted in the deprotonation of the secondary amine conjugated to 1,8-naphthalimide so that the electron-donating ability of the N atom would be greatly enhanced; thus probe 1 showed a 56 nm red-shift in absorption (507 nm) and fluorescence spectra (593 nm, Φ_F=0.14), respectively, from which one could sense Zn²⁺ ratiometrically and colorimetrically. The deprotonated complex, [(1-H)/Zn]⁺, was calculated at m/z 619.1800 and measured at m/z 618.9890. In contrast to these results, the emission of 1 was thoroughly quenched by Cu²⁺, Co²⁺, and Ni²⁺. The addition of other metal ions such as Li⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Mn²⁺, Al³⁺, Cd²⁺, Hg²⁺, Ag⁺, and Pb²⁺ produced a nominal change in the optical properties of 1 due to their low affinity to probe 1. This means that probe 1 has a very high fluorescent imaging selectivity to Zn²⁺ among metal ions.     

A ratiometric fluorescent chemosensor for Al in aqueous solution based on aggregation-induced emission and its application in live-cell imaging

A ratiometric fluorescent chemosensor 1 was developed for the detection of Al³⁺ in aqueous solution based on aggregation-induced emmision (AIE). The chemosensor showed the fluorescence of its aggregated state and Al³⁺-chelated soluble state in the absence and in the presence of Al³⁺, respectively, and resulted in a fluorescence ratio (I₄₆₁/I₅₃₇) response to Al³⁺ in neutral aqueous solution at a detection limit as low as 0.29 μmol L⁻¹. The method was also highly selective to Al³⁺ over other physiological relevant metal ions investigated in this study. Taking advantage of its AIE characteristics, the chemosensor was successfully applied on test papers for simple and rapid detection of Al³⁺. Moreover, the application of 1 for the imaging of Al³⁺ in living cells by ratiometric fluorescence changes was also achieved.     

Synthesis, molecular structure, and chemical reactivity of azuleno[1,2-a]acenaphthylene

The azuleno[1,2-a]acenaphthylene (1a) was prepared from 1-pyrrolidinylacenaphthylene (5) and 2H-cyclohepta[b]furan-2-one (6) by the method of the Takase-Yasunami azulene synthesis. Its ¹H and ¹³C NMR spectra indicate that 1a comprises azulene and naphthalene rather than acenaphtylene and heptafulvene in accordance with speculation drawn from a previous study of the DEPE calculations. The solid-state structure of 1a was elucidated by X-ray crystallographical analysis, indicating that 1a is nearly planar and exhibits little bond alternation as seen in the optimized structure at the MB3LYP/6-311G^∗ level of theory. All bond lengths observed by the X-ray analysis are in good agreement within 0.024 Å with those calculated. Under pyrolytic conditions 1a underwent azulene-naphthalene rearrangement to give 9 and 10. The electrophilic substitution of 1a was observed at the 7-position and the second reaction at the 3-position. The cycloaddition reaction of 1a with dimethyl acetylenedicarboxylate (DMAD) yielded the 1:1 cycloadduct with a heptalene skeleton 16a and the 1:2 cycloadduct 19, along with the substitution product 17. The X-ray structural analysis of the cycloadducts 16a and 19 is also described.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

New stibines containing acetal and formyl group: Platinum complex and unexpected oxastibol derivative

A new tertiary stibine ligand (1) containing acetal group at the ortho-position has been synthesized. This new stibine was then complexed with to obtain trans-PtCl₂L₂ (2) where stibine acts as a monodentate ligand. The acetal was hydrolyzed in a slightly acidic medium and forms a very new stibine (3) containing formyl group at the ortho-position. When (3) was reduced with NaBH₄ an unusual oxastibol (4) derivative was obtained under the experimental conditions used.All the compounds were characterized by IR, mass, ¹H, ¹³C, COSY and HETCOR NMR spectroscopy. The molecular structures of (2), (3) and (4) were determined. Compound (3) crystallizes in two different polymorphs (3a) and (3b) and both the polymorphs show hypervalent antimony with three Sb?O interactions and the molecule exists in O-cis-exo configuration. Compound (4) shows intramolecular Sb?O interactions. To the best of our knowledge this is the first report on organoantimony compounds containing carbonyl groups though their phosphorus and bismuth analogues are well known. Compound (2) shows helicoidal chirality, which is a very new concept in antimony chemistry     

New regioisomeric naphthol–thiazole based ‘turn-on’ fluorescent chemosensor for Al

Two new reactive and highly selective turn-on fluorescent chemosensors based on the position of ring annulation of the naphthalene–thiazole moiety for aluminum ions in ethanol, were synthesized and investigated. It was found that sensors 2 and 4 exhibited a remarkable enhancement of emission upon complexation with Al³⁺. A TD-B3LYP/6-31G(d,p) calculation was performed to characterize the nature of the fluorescence behavior of sensors 2 and 4 upon Al³⁺ complexation. The mechanism of fluorescence was based on the cation promoted hydrolysis of ester and subsequent complexation. The combination of experimental and computational analyses provides a more complete understanding of the molecular level origin of these types of unique photophysical properties.     

Marked difference in singlet-chemiexcitation efficiency between syn-anti isomers of spiro[1,2-dioxetane-3,1′-dihydroisobenzofuran] for intramolecular charge-transfer-induced decomposition

Spiro[1,2-dioxetane-3,1′-dihydroisobenzofuran] syn-3 bearing a hydroxy group at the 6-position (as a model syn-rotamer of parent dioxetane 4 bearing a 3-hydroxyphenyl group) and its isomer anti-3 (as a model anti-rotamer of 4) were synthesized. When these spiro-dioxetanes were treated with tetrabutylammonium fluoride (TBAF) in DMSO, anti-3 emitted light with high efficiency (Φ^CL = 0.41), while the respective value for syn-3 was only 1/10 for anti-3. This significant difference in Φ^CL between syn-3 and anti-3 was attributed to the difference in their singlet-chemiexcitation efficiencies.     

A fluorescent and colorimetric chemosensor for selective detection of aluminum in aqueous solution

We have synthesized a new Schiff base 1, which detects Al³⁺ through fluorescence and naked eye in aqueous solution. The sensor 1 exhibited selective and sensitive recognition toward Al³⁺ via significant fluorescence enhancement (31-fold). Moreover, it showed a significant color change from colorless to yellow. The complex formation was proposed to be 1:1 ratio, based on the Job plot, ESI-mass spectrometry analysis, ¹H NMR titration, and IR analysis. The detection limit was 1.00 μM, which is below the WHO acceptable limit (1.85 μM) in drinking water. In addition, the sensor 1 could be recyclable simply through treatment with a proper reagent such as EDTA.     

Ruthenium monoterpyridine complexes with 2,6-bis(benzoxazol-2-yl)pyridine as an ancillary ligand: Synthesis,structure and spectral studies

Ruthenium monoterpyridine complexes, [1]⁺ and [2]²⁺, with 2,6-bis(benzoxazol-2-yl)pyridine as an ancillary ligand, L, have been synthesized and characterized by UV–Vis, FT-IR and ¹H NMR spectroscopic techniques. The formulations of the complexes were confirmed by the single crystal structure of their perchlorate salts. In both complexes, the Ru^II center is hexa-coordinated in a distorted geometry. In complex [1]⁺, the ancillary ligand L behaves as a bidentate ligand; in [2]²⁺, however, it binds the metal center as a tridentate ligand. The central pyridine nitrogen of terpyridine (N_p,trpy) is in a cis position with respect to the central pyridine nitrogen of the ancillary ligand (N_p,benz) in complex [1]⁺ and in a trans-position in complex [2]²⁺. The cis orientation of N_p,trpy and N_p,benz in complex [1]⁺ forces L to behave as bidentate. The quasi-reversible Ru^II/Ru^III couple appears at 0.90 and 1.44 V versus SCE in the case of complex [1]⁺ and [2]²⁺, respectively. [1]⁺, in the presence of aqueous AgNO₃, affords [2]²⁺ through an intramolecular dissociative interchange pathway.     

A new class of azobenzene chelators for Mg and Ca in buffer at physiological pH

A new class of azobenzene-based chelators, trans-3a and trans-3b (3a and 3b), were designed and synthesized in two steps. Both 3a and 3b were readily dissolved in a buffer solution at physiological pH. The values of the dissociation constant of 3a and 3b for Mg²⁺ and Ca²⁺ were determined by the Hills plot; K_d^Mg=1.12 mM and K_d^Ca=660 μM for 3a and K_d^Mg=158 μM and K_d^Ca=200 μM for 3b, respectively. On irradiation at 489 nm light, 3a isomerized to give cis-form, which underwent cis-to-trans thermal isomerization in darkness at room temperature. The change in the absorption spectrum of the irradiated solution of 3a in the presence of Mg²⁺, showing the cis-to-trans thermal isomerization, indicates that the affinity of cis-3a for Mg²⁺ is lower than that of 3a.     

Metallomesogens derived from benzoxazoles-salicylaldimine conjugates

The synthesis, characterization, and mesomorphic properties of a new series of Schiff bases 2a-h and metal complexes 1a-h-M are prepared and their mesomorphic properties studied. Two single crystallographic structures of 2d (n=12, m=1) and 1g-Pd (n=m=12) were determined by X-ray analysis. Both compounds crystallize in a triclinic space group P−1. A dimeric structure formed by intermolecular H-bonds in 2d was observed, giving nematic phase due to a better aspect ratio. The central geometry at Pd²⁺ ion is nearly perfect square plane. All Schiff bases 2a-h formed N or/and SmC phases. The formation of mesophases of complexes 1a-h-M was strongly dependent on metal ions incorporated. All Cu²⁺, Ni²⁺ and Pd²⁺ complexes exhibited N or/and SmC phase, respectively. However, Zn²⁺ and Co²⁺ complexes were not mesogenic. The lack of mesomorphism was probably attributed to a preferred tetrahedral geometry at Zn²⁺ and Co²⁺ over a square-planar geometry at Cu²⁺ and Pd²⁺.     

Spectroscopic,structure and DFT studies of copper(II) and palladium(II) complexes of pyridine-2-carboxaldehyde-2-pyridylhydrazone: A chromogenic agent for palladium(II)

A heterocyclic hydrazone ligand, pyridine-2-carboxaldehyde-2-pyridylhydrazone, HL, 1, was investigated as a new chromogenic agent for selective detection of Pd²⁺. The ligand HL, 1, undergoes 1:1 complexation with Pd²⁺ and Cu²⁺ to form complexes [Pd(L)Cl], 1a and [Cu(HL)Cl₂], 1b respectively. The complex 1a gives a characteristic absorption peak at 536 nm with distinct reddish-pink coloration. The change in color can easily be distinguished from other metal complexes by the naked eye. No obvious interference was observed in the presence of other metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺, Al³⁺, Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Pb²⁺). The association constants, K_ass (UV–Vis), were found to be 5.52 ± 0.004 × 10⁴ for 1a and 4.94 ± 0.006 × 10⁴ for 1b at 298 K. On excitation at 295 nm, the ligand HL, 1 strongly emits at 372 nm due to an intraligand ¹(π–π^∗) transition. Upon complexation the emission peaks are blue shifted (λ_ex 295 nm, λ_em 358 nm for 1a and λ_ex 295 nm, λ_em 367 nm for 1b) along with a quenching (F/F₀ 0.32 for 1a and 0.88 for 1b) in the emission intensity. DFT and TDDFT calculations were highly consistent with the spectroscopic behavior of the ligand and complexes. The molecular structure of the complex 1b has been determined by single crystal X-ray diffraction studies.     

N-Trifyl substituted 1,4-diheterocyclohexanes—stereodynamics and the Perlin effect

The stereodynamic behaviour of 1-(trifluoromethylsulfonyl)piperidine 1, 4-(trifluoromethylsulfonyl)morpholine 2, 1,4-bis(trifluoromethylsulfonyl)piperazine 3 and 4-(trifluoromethylsulfonyl)thiomorpholine 1,1-dioxide 4 was studied by low-temperature ¹H, ¹³C and ¹⁹F NMR spectroscopies. In acetone solution, compounds 1, 2 and 4 were found to exist as mixtures of two conformers in the ratio of 4:1, 4:1 and 8:1, respectively, differing by orientation of the CF₃ group with respect to the ring. Compound 3 exists as a mixture of three conformers in the ratio of 3:28:69 also differing by the orientation of the two CF₃ groups. Unlike the previously studied N-trifyl substituted 1,3,5-triheterocyclohexanes, the preferred conformers of compound 1 and of 1,4-diheterocyclohexanes 2-4 are those with the CF₃ group directed outward from the ring, which is caused by intramolecular interactions of the oxygen atoms of the CF₃SO₂N groups with the equatorial hydrogens in the α-position. B3LYP/6-311+G(d,p) calculations of the energy, geometry and NMR parameters corroborate the experimental data. The calculated Perlin effects for all conformers of compounds 1-4 as well as those measured for the major conformers of compounds 3 and 4 were analyzed by the use of the NBO analysis.     

Four-way-output molecular response system based on the dihydrodibenzo[c,g]phenanthrene skeleton: modulation of CD and FDCD activity by acid and electron-transfer

Presence or absence of electron-accepting dye chromophores is the key function for ON/OFF switching of fluorescence from the dihydrodibenzo[c,g]phenanthrene skeleton in 2²⁺/3. The helical fluorophore in 2²⁺ could be generated stereoselectively upon electrolysis of binaphthylic donor 1 through intramolecular chirality transmission. Huge chiroptical signals are easily detected by circular dichroism (CD) and fluorescence-detected CD (FDCD) techniques to realize novel four-way-output response.     

FRET-derived ratiometric fluorescence sensor for Cu

New N-(pyrenylmethyl)naphtho-azacrown-5 (1) was synthesized as an ‘On-Off’ fluorescent chemosensor for Cu²⁺. Excited at 240 nm corresponding to the absorption of naphthalene unit (energy donor) of 1, emission at 380 nm from pyrene unit (energy acceptor) is observed, indicating that intramolecular fluorescence resonance energy transfer (FRET-On) occurs in 1. When Cu²⁺ is added to a solution of 1, however, the fluorescence of pyrene is strongly quenched (FRET-Off) whereas that of naphthalene group is revived. Such FRET ‘On-Off’ behavior of 1 is observed only in the case of Cu²⁺ binding, but not for other metal cations. The high selectivity of 1 toward Cu²⁺ can be potentially applied to a new kind of FRET-based chemosensor. The FRET On-Off behavior is supported by computational studies. The calculated molecular orbitals of HOMO and LUMOs suggest the excited-state interactions leading to FRET from naphthalene to pyrene in 1, but no electron density changes in 1·Cu²⁺ complex.