Three dimeric anthracene derivatives from the fruits of Bulbine abyssinica

From the fruits of Bulbine abyssinica three new dimeric anthracene derivatives, (P)-8,9,1′,8′-tetrahydroxy-3,3′-dimethyl[10,7′-bianthracene]-1,4,9′,10′-tetraone (trivial name abyquinone A), (10R)-1,4,8,1′,8′-pentahydroxy-3,3′-dimethyl-[10,7′-bianthracene]-9,9′,10′(10H)-trione (trivial name abyquinone B), and (10R)-3′,4′-dihydro-1,4,8,3′,8′,9′-hexahydroxy-3,3′-dimethyl-[10,7′-bianthracene]-9,1′(10H,2′H)-dione (trivial name abyquinone C) were isolated. Despite their structural differences, these three compounds are connected to each other by the apparently biomimetic conversion of abyquinone C (a preanthraquinonylanthrone with two stereogenic centers) into B (an anthraquinonylanthrone with one stereogenic center) and finally into A (an axially chiral bianthraquinone) under mild conditions, involving a highly efficient center-to-axis chirality transfer. In addition, the known anthraquinones islandicin and chrysophanol were identified. The structures were determined on the basis of spectroscopical evidences, chemical transformations, and quantum chemical CD calculations.     

Synthesis of southern (C1′-C11′) fragment of pamamycin-635A

The synthesis of the southern (C1′-C11′) fragment of pamamycin-635A, isolated from Streptomyces alboniger, was achieved via an Evans aldol reaction, a cis-selective iodoetherification and a stereospecific deiodination as the key steps.     

An efficient, mild, and selective Ullmann-type N-arylation of indoles catalyzed by copper(I) complex

A wide range of N-arylated indoles are selectively synthesized through intermolecular C(aryl)-N bond formation from the corresponding aryl iodides and indoles through Ullmann-type coupling reactions in the presence of a catalytic amount of easily available N,N,N′,N′-tetramethyl-BINAM-CuI complex under very mild reaction conditions.     

Sorbifuranones A-C, sorbicillinoid metabolites from Penicillium strains isolated from Mediterranean sponges

Three novel natural products, sorbifuranones A-C (4-6), were isolated from a Penicillium chrysogenum fungus isolated from the marine sponge Ircinia fasciculata. Sorbifuranones B (5) and C (6) and 2′,3′-dihydrosorbicillin, a putative precursor to sorbifuranone B, were also found in the culture of another Penicillium strain, which was isolated from the sponge Tethya aurantium. Their constitutions were elucidated mainly by 2D NMR. NOE correlations in combination with quantum chemical calculations and comparison of experimental and calculated electronic circular dichroism (CD) spectra permitted assignment of the absolute configuration of sorbifuranone C. The structures hint at a two-step cleavage-cyclization sequence of sorbifuranone A (4) leading to the spiro compound sorbifuranone C, while sorbifuranone B is likely to be the respective cleavage product of a putative 2′,3′-dihydrosorbifuranone A, which cannot cyclize further.     

Synthesis and characterization of new polyimides containing pendent pentadecyl chains

A new unsymmetrical aromatic diamine, viz., 4-pentadecylbenzene-1,3-diamine was synthesized through a series of reaction steps starting from 3-pentadecylphenol. 4-Pentadecylbenzene-1,3-diamine was employed to synthesize a series of new polyimides by one-step polycondensation in m-cresol with four commercially available aromatic dianhydrides, viz., 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), 4,4′-oxydiphthalic anhydride (ODPA) and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6-FDA). Inherent viscosities of resulting polyimides were in the range 0.33-0.67 dL/g and number average molecular weights were in the range 14,700-52,200 (GPC, polystyrene standard). Polyimides containing pendent pentadecyl chains were soluble in organic solvents such as chloroform, m-cresol, N,N-dimethylacetamide (DMAc), 1-methyl-2-pyrrolidinone (NMP), pyridine and nitrobenzene. Strong and flexible films of polyimides could be cast from their chloroform solutions. Polyimides exhibited glass transition temperature in the range 158-206 °C. The temperature at 10% wt. loss (T₁₀), determined by TGA in nitrogen atmosphere, of polyimides was in the range 470-480 °C indicating good thermal stability.     

Synthesis and characterization of polyamides containing pendant pentadecyl chains

A new aromatic diacid monomer viz., 4-(4′-carboxyphenoxy)-2-pentadecylbenzoic acid was synthesized starting from cardanol and was characterized by FTIR, ¹H- and ¹³C NMR spectroscopy. A series of new aromatic polyamides containing ether linkages and pendant pentadecyl chains was prepared by phosphorylation polycondensation of 4-(4′-carboxyphenoxy)-2-pentadecylbenzoic acid with five commercially available aromatic diamines viz., 1,4-phenylenediamine, 4,4′-oxydianiline, 4,4′-methylenedianiline, 1,3-phenylenediamine, and 4,4′-(hexafluoroisopropylidene)dianiline. Inherent viscosities of the polyamides were in the range 0.45-0.66 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C. The introduction of ether linkages and pendant pentadecyl chains into polyamides led to an enhanced solubility in N,N-dimethylacetamide and 1-methyl-2-pyrrolidinone at room temperature or upon heating. The polyamides could be solution-cast into tough, flexible and transparent films from their N,N-dimethylacetamide solution. Wide angle X-ray diffraction patterns exhibited broad halo indicating that the polymers were essentially amorphous in nature. X-Ray diffractograms also displayed a diffuse to sharp reflection in the small-angle region (2θ = ∼2-5°) for the polyamides characteristics of formation of loosely to well-developed layered structure arising from packing of flexible pentadecyl chains. The glass transition temperature observed for the polyamides was in range 139-189 °C. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of the polyamides was in the range 425-453 °C indicating their good thermal stability.     

An Efficient Stereoselective Total Synthesis of Synargentolide A and Its Epimer

The stereoselective total synthesis of a naturally occurring α‐pyrone (=2H‐pyran‐2‐one) derivative, synargentolide A ( 1 ), and of its epimer 2 (with the originally proposed structure of synargentolide A) was efficiently accomplished involving D ‐tartaric acid as the starting material and an olefin cross‐metathesis reaction as the key step.     

Neomacrophorin I,II, and III,novel drimenyl cyclohexanes with hydroxylated butanoates from Trichoderma sp. 1212-03

Neomacrophorins I (1), II (2), and III (3) were isolated from the culture broth of Trichoderma sp. 1212-03, which was collected at Shirakami Mountainous area in Japan. Structural analyses disclosed that these resemble known macrophorins but possess axial-hydroxy group at C3 as well as different side chains at C7′. These are diastereomeric forms of macrophorins for 5′,6′-epoxide functionality. The NMR analyses suggested their relative configurational relationship between the C1–C15 drimene and C1′–C7′ epoxyquinone moieties. ECD spectral discussions verified them particularly for C5′,C6′-epoxyquinone (1), C5′,C6′-epoxysemiquinone (2 and 3), and 2″,3″-dihydroxybutanoate moiety in 1 and 2. The configuration of C3″-stereocenter of 3 was determined by chiral GC–MS after converting into methyl (S)-3″-hydroxybutanoate by basic of 3 methanolysis. Biological assays disclosed that 1 induces hyphal branching of Cochliobolus miyabeanus as well as cytotoxicity against human colorectal cancer COLO 201.     

Synthesis of soluble polyimides for vertical alignment of liquid crystal via one-step method

A series of polyimides (PIs) were copolymerized from 4-dodecyloxy-biphenyl-3′,5′-diaminobenzoate (DBPDA), 3,3′-dimethyl-4,4′-methylene-dianiline (DMMDA) and 4,4′-oxydi(phthalic anhydride) (ODPA) via one-step method. The PIs possessed excellent solubility in polar aprotic solvents and easily formed thin flexible films by solution casting. The glass-transition temperatures (T_gs) of the PIs were in the range of 219-242 °C and thermal decomposition temperatures in nitrogen occurred above 350 °C. The resultant PI films exhibited high transparency at wavelengths greater than 400 nm and induced excellent uniform vertical alignment of liquid crystal (LC). Even after the rubbing process, the pretilt angles of LC were still above 89°. The PI seems to be a prospective material for alignment layers in flexible displays.     

Difluorocarbene chemistry: synthesis of gem-difluorocyclopropenylalkynes and 3,3,3′,3′-tetrafluorobicyclopropyl-1,1′-dienes

A series of gem-difluorocyclopropenylalkynes are easily obtained in good yields by the Sonogashira reaction of 3,3-difluoro-1-iodocyclopropenes with terminal alkynes. Onto these new alkynes addition of difluorocarbene, generated from the decomposition of FSO₂CF₂COOTMS in diglme in the presence of 10 mol% anhydrous NaF at 120 °C, gives 3,3,3′,3′-tetrafluorobicyclopropyl-1,1′-dienes. Acid hydrolysis of gem-difluorocyclopropenylalkynes in refluxing CH₃OH affords the corresponding methoxycarbonylenynes.     

New methods for the preparation of aryl 2-iminoimidazolidines

A divergent strategy for the synthesis of 1-aryl- and 2-aryl-2-iminoimidazolidines is presented. Cyclization of N-Boc-N′-aryl-N′′-(2-hydroxyethyl)guanidines in the presence of methanesulfonyl chloride and triethylamine or sodium hydride at 0 °C affords the corresponding 2-iminoimidazolidines in good yields.     

Synthesis and characterization of crosslinkable polyimides

A series of copolyimides were prepared from benzophenone-3,3′,4,4′-tetracarboxylic dianhydride (BTDA) and various aromatic diamines which contain a fluorenyl group and/or alkyl substituents in ortho position to the amine groups. The effect of the chemical composition on the glass transition temperature (T_g), thermal stability as well as on the dielectric constant of these polymers was studied. High T_g polymers (T_g ranging from 260 °C to 370 °C), withstanding temperatures as high as 400 °C for 10 h and having a low dielectric constant (from 2.6 to 3.1) were successfully synthesized. All these polymers were able to crosslink under UV or thermal treatments.     

A new class of aromatic polybenzoxazoles containing ortho-phenylenedioxy groups

A series of poly(o-hydroxy amide)s having both ether and ortho-catenated phenylene unit in the main chain were synthesized via the low-temperature solution polycondensation of 4,4^′-(1,2-phenylenedioxy)dibenzoyl chloride and 4,4^′-(4-tert-butyl-1,2-phenylenedioxy)dibenzoyl chloride with three bis(o-aminophenol)s including 4,4^′-diamino-3,3^′-dihydroxybiphenyl, 3,3^′-diamino-4,4^′-dihydroxybiphenyl, and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. The poly(o-hydroxy amide)s exhibited inherent viscosities in the range of 0.23-0.96 dl/g. Most of the poly(o-hydroxy amide)s were soluble in polar organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP) and could afford flexible and tough films by solution casting. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide)s afforded polybenzoxazoles. However, the polybenzoxazoles were organic-insoluble except for those with the hexafluoroisopropylidene group. The polybenzoxazoles exhibited glass-transition temperatures (T_g) in the range of 200-232 °C by DSC and softening temperatures (T_s) of 250-256 °C by thermomechanical analysis. Thermogravimetric analyses indicated that most polybenzoxazoles were stable up to 500 °C in air or nitrogen. The 10% weight loss temperatures were recorded in the ranges of 546-606 °C in air and 574-631 °C in nitrogen.     

Photoreaction of iodouracil in DNA duplex; C-I bond is cleaved via two different pathways ‘homolysis and heterolysis’

We recently found that a selective photoreaction of 5-iodouracil (^IU) occurs in 5′-(G/C)AA^IU^IU-3′ and 5′-(G/C)A^IU^IU-3′ sequences in ^IU-substituted duplex DNA. In this study, the photoreactivity of the 5′-G(A)_n^IUT-3′ sequence was examined using various ^IU-containing oligonucleotides. HPLC analysis revealed that their photoreactivity largely depends on the number of As between G and ^IU. The most efficient reactivity was observed when the number of As was two and this decreased with increasing numbers from three to five, as observed for the 5′-G(A)_n^IUT-3′ sequence. These results indicate that the G located 5′ from ^IU acts as an electron donor for ^IU, as in the photoreaction of ^BrU. In sharp contrast to the ^BrU photoreaction, ^IU was photoreactive when the number of As was zero or more than five. These results indicate that both homolytic and heterolytic pathways operate in the formation of the uracil-5-yl radical in the photoreaction of ^IU in duplex DNA. In addition, the ratio of these pathways is highly dependent on DNA sequence.     

An efficient synthesis of synargentolide A from d-mannitol

An efficient synthesis of synargentolide A is described by using d-mannitol and d-malic acid. The key features of the synthetic strategy include Wittig olefination, ring closing-metathesis reaction and cross-metathesis reaction for the formation of synargentolide A.     

Domino reactions in water for the stereoselective synthesis of novel spiro dihydro-2′H-[indene-2,3′-thiophen]-1(3H)-ones with three contiguous stereocenters

The domino reactions of (E)-2-(aryl)-2,3-dihydro-1H-inden-1-ones and 1,4-dithiane-2,5-diol in the presence of triethylamine in water stereoselectively afforded a library of 2′-(aryl)-4′-hydroxy-4′,5′-dihydro-2′H-spiro[indene-2,3′-thiophen]-1(3H)-ones. This transformation presumably proceeds via the generation of 2-mercaptoacetaldehyde from 1,4-dithiane-2,5-diol followed by Michael addition–intramolecular aldol sequence with C–C and C–S bond formations and creation of three contiguous stereocenters in a one-pot operation.     

Poly(amideimide)s containing pendant pentadecyl chains: Synthesis and characterization

A new aromatic diacylhydrazide monomer viz., 4-[4′-(hydrazinocarbonyl)phenoxy]-2- pentadecylbenzohydrazide was synthesized starting from cardanol, which in turn is obtainable from cashew nut shell liquid - a renewable resource material. A series of new poly(amideimide)s containing flexibilizing ether linkages and pendant pentadecyl chains was synthesized from 4-[4′-(hydrazinocarbonyl)phenoxy]-2-pentadecylbenzohydrazide and commercially available aromatic dianhydrides, viz., benzene-1,2,4,5-tetracarboxylic dianhydride, 3,3′,4,4′-biphenyltetracarboxylic dianhydride, benzophenone-3,3′,4,4′-tetracarboxylic dianhydride, 4,4′-oxydiphthalic anhydride and 4,4′-(hexafluoro isopropylidene)diphthalic anhydride by a two-step solution polycondensation in N,N-dimethylacetamide via the poly(hydrazide acid) intermediate. Inherent viscosities of poly(amideimide)s were in the range 0.60-0.64 dL/g in N,N-dimethylacetamide at 30 ± 0.1 °C. Poly(amideimide)s could be solution cast into tough, transparent and flexible films from their N,N-dimethylacetamide solutions. The solubility of poly(amideimide)s was significantly improved by incorporation of pendant pentadecyl chains and were found to be soluble in N,N-dimethylacetamide, 1-methyl-2-pyrrolidinone, pyridine and m-cresol at room temperature or upon heating. Wide angle X-ray diffraction patterns of poly(amideimide)s revealed a broad halo at around 2θ = ∼19° suggesting that polymers were amorphous in nature. In the small-angle region, diffuse to sharp reflections of a typically layered structure resulting from the packing of pentadecyl side chains were observed. The temperature at 10% weight loss (T₁₀), determined by TGA in nitrogen atmosphere, of poly(amideimide)s was in the range of 388-410 °C indicating their good thermal stability. Glass transition temperatures of poly(amideimide)s were in the range 162-198 °C. It was observed that the plasticization effect of attached pentadecyl side chains induced the depression of T_g.     

Synthesis of a new bidentate ferrocenyl N-heterocyclic carbene ligand precursor and the palladium (II) complex trans-[PdCl2(CfcC)], where (CfcC) = 1,1′-di-tert-butyl-3,3′-(1,1′-dimethyleneferrocenyl)-diimidazol-2-ylidene

A new ferrocenyl-N-heterocyclic carbene ligand precursor 1,1′-bis[(1-tert-butylimidazolium)-3-methyl]ferrocene dichloride has been synthesised and structurally characterised. The imidazolium salt was readily deprotonated in situ with KN(SiMe₃)₂ and reacted with [PdCl₂ (cod)] to afford the structurally characterised palladium (II) complex trans-[PdCl₂(C^∧fc^∧C)], where (cod) = 1,5-cyclooctadiene and (C^∧fc^∧C) = 1,1′-di-tert-butyl-3,3′-(1,1′-dimethyleneferrocenyl)-diimidazol-2-ylidene.     

Preparation of C5-substituted O,5′-cyclouridine

The synthesis of hitherto unknown C5-substituted O⁶,5′-cyclouridines is described. The 2′,3′-isopropylidene-uridine was treated with N-halogenosuccinimides forming appropriate bridged 5-halogeno derivatives. Using lithiation method, bromine substituent at C5 position was exchanged into various alkyl and alkenyl derivatives.     

Enantioselective synthesis of planar chiral azaferrocenes via chiral ligand-mediated ring- and lateral-lithiations

Lithiation of 1′,2′,3′,4′,5′-pentamethylazaferrocene (1) with sec-BuLi/(−)-sparteine (3) in Et₂O at −78°C followed by quenching with electrophiles gave the ring-substituted products 2 in 74-81% ee. On the other hand, lithiation of 1′,2,2′,3′,4′,5,5′-heptamethylazaferrocene (6) with sec-BuLi in the presence of S-valine-derived bis(oxazoline) 5 in Et₂O at −55°C and subsequent reaction with electrophiles afforded the laterally functionalized products 7 in excellent enantioselectivity (96-99% ee).