Review of molecular modification techniques for improved detection of biomolecules by mass spectrometry

After a soft ionizing method was established, MS (mass spectrometry) has become a more common tool in biochemistry because soft ionization made it possible to detect large molecules such as proteins. Many kinds of applications were established to further utilize MS for the identification or quantitation of biomolecules. In this review, we introduce recent applications with special focus on chemical modification techniques and chemical probes developed for the MS determination of biomolecules.     

New applications of multiply charged ionic probes as cleavable cross-linker and polymerization reagent

We have designed new cleavable cross-linkers for biomolecules containing the 2,6-bis(oxazolinyl)pyridine (pybox) lanthanum complex. These species can effectively donate multiple charges to afford cross-linker ions for target biomolecules. The cross-linkers are cleaved easily by adding water. Moreover, we were able to detect chain structures of target molecules, including biomolecules and carbon clusters, such as fullerene C₆₀, by the addition of some MS ionic probes. Cold-spray ionization mass spectrometry demonstrated the applications of multiply charged ionic probes as cleavable cross-linkers and polymerization reagents.     

Mass probe-assisted ionization method for total analysis of biomolecules with electrospray ionization-mass spectrometry

In this paper, we review the mass probes used for the derivation of a variety of biomolecules efficiently detected by the electrospray ionization-mass spectrometry and mass probe-assisted ionization method for total analysis and determination by consecutive detection with a single instrument. We describe mass probes for a variety of molecules including proteins, nucleobases, metallic cations, and other small molecules.     

Ultrasound ionization of biomolecules

To date, mass spectrometric analysis of biomolecules has been primarily performed with either matrix‐assisted laser desorption/ionization (MALDI) or electrospray ionization (ESI). In this work, ultrasound produced by a simple piezoelectric device is shown as an alternative method for soft ionization of biomolecules. Precursor ions of proteins, saccharides and fatty acids showed little fragmentation. Cavitation is considered as a primary mechanism for the ionization of biomolecules. Copyright © 2010 John Wiley & Sons, Ltd.     

High resolution detection of high mass proteins up to 80,000 Da via multifunctional CdS quantum dots in laser desorption/ionization mass spectrometry

CdS quantum dots (∼5 nm) are used as multifunctional nanoprobes as an effective matrix for large proteins, peptides and as affinity probes for the enrichment of tryptic digest proteins (lysozyme, myoglobin and cytochrome c) in laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS). The use of CdS quantum dots (CdS QDs) as the matrix allows acquisition of high resolution LDI mass spectra for large proteins (5000-80,000 Da). The enhancement of mass resolution is especially notable for large proteins such as BSA, HSA and transferrin (34-49 times) when compared with those obtained by using SA as the matrix. This technique demonstrates the potentiality of LDI-TOF-MS as an appropriate analytical tool for the analysis of high-molecular-weight biomolecules with high mass resolution. In addition, CdS QDs are also used as matrices for background-free detection of small biomolecules (peptides) and as affinity probes for the enrichment of tryptic digest proteins in LDI-TOF-MS.     

Nanostructured silicon surface modifications for as a selective matrix-free laser desorption/ionization mass spectrometry

Matrix-assisted laser desorption/ionization mass spectrometry is an established soft ionization method that is widely applied to analyze biomolecules. The UV-absorbing organic matrix is essential for biomolecule ionization; however, it also creates matrix background interference, which results in problematic analyses of biomolecules of less than 700 Da. Therefore, this study investigates hydrophilic, hydrophobic cationic, anionic and immobilized metal ion surface chemical modifications to advance nanostructured silicon mass spectrometry performance (nSi-MS). This investigation provides information required for a possible novel mass spectroscopy that combines surface-enhanced and nanostructured silicon surface-assisted laser desorption/ionization mass spectrometry for the selective detection of specific compounds of a mixture.     

Visible-laser desorption/ionization on gold nanostructures

In this report, we describe the visible-laser desorption/ionization of biomolecules deposited on gold-coated porous silicon and gold nanorod arrays. The porous silicon made by electrochemical etching was coated with gold using argon ion sputtering. The gold nanorod arrays were fabricated by electrodepositing gold onto a porous alumina template, and the subsequent partial removal of the alumina template. A frequency-doubled/tripled Nd : YAG laser was used to irradiate the gold nanostructured substrate, and the desorbed molecular ions were mass-analyzed by a time-of-flight mass spectrometer. The desorption/ionization of biomolecules for both substrates was favored by the use of the 532-nm visible-laser, which is in the range of the localized surface plasmon resonance of the gold nanostructure. The present technique offers a potential analytical method for low-molecular-weight analytes that are rather difficult to handle in the conventional matrix-assisted laser desorption/ionization (MALDI) mass spectrometry.     

Surface‐Assisted Laser Desorption/Ionization Mass Spectrometric Detection of Biomolecules by Using Functional Single‐Walled Carbon Nanohorns as the Matrix

A surface‐assisted laser desorption/ionization time‐of‐flight mass spectrometric (SALDI‐TOF MS) method was developed for the analysis of small biomolecules by using functional single‐walled carbon nanohorns (SWNHs) as matrix. The functional SWNHs could transfer energy to the analyte under laser irradiation for accelerating its desorption and ionization, which led to low matrix effect, avoided fragmentation of the analyte, and provided high salt tolerance. Biomolecules including amino acids, peptides, and fatty acids could successfully be analyzed with about 3‐ and 5‐fold higher signals than those obtained using conventional matrix. By integrating the advantages of SWNHs and the recognition ability of aptamers, a selective approach was proposed for simultaneous capture, enrichment, ionization, and MS detection of adenosine triphosphate (ATP). This method showed a greatly improved detection limit (1.0 μM ) for the analysis of ATP in complex biological samples. This newly designed protocol not only opened a new application of SWNHs, but also offered a new technique for selective MS analysis of biomolecules based on aptamer recognition systems.     

Temperature-Controlled Electrospray Ionization: Recent Progress and Applications

Native electrospray ionization (ESI) and nanoelectrospray ionization (nESI) allow researchers to analyze intact biomolecules and their complexes by mass spectrometry (MS). The data acquired using these soft ionization techniques provide a snapshot of a given biomolecules structure in solution. Over the last thirty years, several nESI and ESI sources capable of controlling spray solution temperature have been developed. These sources can be used to elucidate the thermodynamics of a given analyte, as well as provide structural information that cannot be readily obtained by other, more commonly used techniques. This review highlights how the field of temperature-controlled mass spectrometry has developed.     

Aerosol Matrix-Assisted Laser Desorption Ionization Mass Spectrometry

A new method of liquid sample introduction for a time-of-flight mass spectrometer (TOF-MS) has been developed by applying the method of matrix-assisted laser desorption ionization to aerosols. Analyte biomolecules are dissolved in a methanol solvent along with a UVabsorbing matrix and formed into an aerosol with a pneumatic nebulizer. The aerosol particles are dried in a heated skimmer tube before ionization by pulsed 355-nm UV laser radiation. Mass analysis is achieved in a linear TOF-MS. Results for the ionization of bovine insulin (5733.5 Mw) are reported.     

MPAI (mass probes aided ionization) method for total analysis of biomolecules by mass spectrometry.

We have designed and synthesized various mass probes, which enable us to effectively ionize various molecules to be detected with mass spectrometry. We call the ionization method using mass probes the "MPAI (mass probes aided ionization)" method. We aim at the sensitive detection of various biological molecules, and also the detection of bio-molecules by a single mass spectrometry serially without changing the mechanical settings. Here, we review mass probes for small molecules with various functional groups and mass probes for proteins. Further, we introduce newly developed mass probes for proteins for highly sensitive detection.     

Matrix-assisted laser desorption/ionization mechanism study with dihydroxybenzoic acid isomers as matrices

Desorption and ionization efficiencies of matrix-assisted laser desorption/ionization (MALDI) for various biomolecules with different dihydroxybenzoic acid isomers were studied. No clear relationships were observed between MALDI biomolecule signals vs. gas-phase basicity, proton affinity and ionization potential. This indicates the the gas-phase protonation mechanism is not adequate to explain the observed results.     

Disentangling of Information About the Structure of Biomolecules Based on the Decomposition and Separation of Two-Dimentional Charge Distributions of Ions

Electrospray ionization mass spectra of biomolecules typically consist of a series of multiply charged ions because of the transfer of protons or other charge carriers between ions of biomolecules and the surrounding liquid or gas. The distribution of intensities of ions retained charge carriers contains information about the spatial structure of biomolecules. A new method is developed for the separation and decomposition of multidimensional charge distributions of ions bearing other charge carriers, such as alkali metal ions, along with protons. The proposed method ensures the estimation of the probability of charge carrier retention by separate functional groups for the selected conformations of biomolecules. The paper describes the application of this method to the analysis of a two-dimensional charge distribution of horse heart cytochrome C, resulting in the revelation of at least two its structural forms under the studied conditions.     

Molecular Imaging of Biological Samples on Nanophotonic Laser Desorption Ionization Platforms

Mass spectrometry imaging (MSI) is a comprehensive tool for the analysis of a wide range of biomolecules. The mainstream method for molecular MSI is matrix‐assisted laser desorption ionization, however, the presence of a matrix results in spectral interferences and the suppression of some analyte ions. Herein we demonstrate a new matrix‐free MSI technique using nanophotonic ionization based on laser desorption ionization (LDI) from a highly uniform silicon nanopost array (NAPA). In mouse brain and kidney tissue sections, the distributions of over 80 putatively annotated molecular species are determined with 40 μm spatial resolution. Furthermore, NAPA‐LDI‐MS is used to selectively analyze metabolites and lipids from sparsely distributed algal cells and the lamellipodia of human hepatocytes. Our results open the door for matrix‐free MSI of tissue sections and small cell populations by nanophotonic ionization.     

A novel,simple and sensitive ligand affinity capture method for detecting molecular interactions by MALDI mass spectrometry

A simple and sensitive ligand affinity capture method (LAC) was developed to detect biotinylated biomolecules bound to a biotin–avidin base by matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry (MALDI ToF MS). Glass slides covered with a metal film for MALDI MS applications were treated with amino‐silane and derivatized with biotin followed by binding of avidin. Washing buffers with high ionic strength increased the specificity of the subsequent binding of biotinylated biomolecules to the avidin layer. A combined thin layer‐dried droplet method using α‐cyano‐4‐hydroxycinnamic acid (CHCA) in acetone or ethyl acetate resulted in the most intense ions of biotinylated polymyxin B, whereas the matrix conditions did not influence the detection of angiotensin II. Addition of biotinylated biomolecules in the low femtomole to low picomole range resulted in sufficient ion intensity for detection by the LAC method. The LAC concept was extended by binding of biotinylated lipopolysaccharide to the biotin–avidin base followed by preferential capture and specific detection of the binding antagonist polymyxin B. Copyright © 2008 John Wiley & Sons, Ltd.     

Evidence for coupling between nitrile groups using DNA templates: a promising new method for monitoring structures with infrared spectroscopy

Infrared spectroscopy is a common method for monitoring biomolecular structures but suffers from spectral congestion. Non-natural vibrational probes provide a way to regain structural specificity because they provide a unique vibrational signature and can be incorporated into proteins or other biomolecules at specific locations. A popular probe is the nitrile group because its frequency is sensitive to the electrostatics of its environment. In this work, we show that pairs of nitrile groups can be used to directly probe distances and angles in dual labeled molecules. By labeling model DNA oligomers with pairs of nitrile tags, we demonstrate that the vibrational coupling between two nitrile groups is strong enough that Fourier transform infrared (FTIR) spectra can be used to probe relative nitrile distances >4.5 A. Our approach is similar in spirit to monitoring structures with fluorescence resonance energy transfer (FRET) using a pair of fluorescent labels or a pair of spin labels in electron spin resonance spectroscopy. The small sizes of nitrile groups make especially valuable probes of sterically confined regions like the inner cores of large biomolecules where other spectroscopic probes do not fit.     

Cold-spray ionization mass spectrometry: principle and applications

A direct solution analysis method, cold-spray ionization (CSI) mass spectrometry (MS), a variant of electrospray (ESI) MS operating at low temperature (ca -80 to 10 degrees C), allows the facile and precise characterization of labile organic species, especially those in which non-covalent bonding interactions are prominent. We applied this method to investigations of the solution structures of many labile organic species, including unstable reagents and reaction intermediates, asymmetric catalysts, supramolecules and even primary biomolecules. Remarkable analytical results were obtained for highly ordered supramolecules using the CSI method. Whereas conventional ESI is not applicable to these compounds because of their instability to heat and/or air, CSI affords multiply charged molecular ions with many solvent molecules attached. Investigation of the constitution of Grignard reagents in solution is extremely challenging, but CSI-MS allowed us to identify one of the key structures in THF solution. Recently, this method was adopted for investigations of the solution structures of primary biomolecules such as nucleosides, amino acids, sugars and lipids, revealing singly charged Na(+) adducts of large clusters (chain structures), presumably linked by non-covalent interactions, including hydrogen bonding and/or hydrophobic interactions. The principle of the CSI method and applications of the method to a wide variety of labile organic species and primary biomolecules in solution are described.     

15N-labeled ionic probe attachment mass spectrometry of carbon clusters

An ionization method that uses metal-complex-based ionization probes, malonic acid 3-[2,6-bis(4,4-dimethyloxazolin-2-yl)pyridin-4-yloxy]propyl ethyl ester (EM-TMpybox) and potassium N-{3-[2,6-bis(4,4-dimethyloxazolin-2-yl)pyridine-4-yloxy]propyl} aminoacetate (Sar-TMpybox), was developed for isotope ratio analysis and the effective ionization of unsubstituted carbon clusters. The preparation of Sar-TMpybox and EM-TMpybox and their applications in cold-spray ionization mass spectrometry are reported. A probe applicable to a substituted fullerene is also demonstrated.     

Broad Applications of Thiazole Orange in Fluorescent Sensing of Biomolecules and Ions

Fluorescent sensing of biomolecules has served as a revolutionary tool for studying and better understanding various biological systems. Therefore, it has become increasingly important to identify fluorescent building blocks that can be easily converted into sensing probes, which can detect specific targets with increasing sensitivity and accuracy. Over the past 30 years, thiazole orange (TO) has garnered great attention due to its low fluorescence background signal and remarkable ‘turn-on’ fluorescence response, being controlled only by its intramolecular torsional movement. These features have led to the development of numerous molecular probes that apply TO in order to sense a variety of biomolecules and metal ions. Here, we highlight the tremendous progress made in the field of TO-based sensors and demonstrate the different strategies that have enabled TO to evolve into a versatile dye for monitoring a collection of biomolecules.     

Ionization of Volatile Organics and Nonvolatile Biomolecules Directly from a Titanium Slab for Mass Spectrometric Analysis

Atmospheric pressure chemical ionization (APCI)-mass spectrometry (MS) and electrospray ionization (ESI)-MS can cover the analysis of analytes from low to high polarities. Thus, an ion source that possesses these two ionization functions is useful. Atmospheric surface-assisted ionization (ASAI), which can be used to ionize polar and nonpolar analytes in vapor, liquid, and solid forms, was demonstrated in this study. The ionization of analytes through APCI or ESI was induced from the surface of a metal substrate such as a titanium slab. ASAI is a contactless approach operated at atmospheric pressure. No electric contacts nor any voltages were required to be applied on the metal substrate during ionization. When placing samples with high vapor pressure in condensed phase underneath a titanium slab close to the inlet of the mass spectrometer, analytes can be readily ionized and detected by the mass spectrometer. Furthermore, a sample droplet (~2 μL) containing high-polarity analytes, including polar organics and biomolecules, was ionized using the titanium slab. One titanium slab is sufficient to induce the ionization of analytes occurring in front of a mass spectrometer applied with a high voltage. Moreover, this ionization method can be used to detect high volatile or polar analytes through APCI-like or ESI-like processes, respectively.