Fractionation and Crystal Morphology of Rigid Polymer,Poly(p‐Phenylene Benzobisthiazole)

Abstract

Fractionation of the rigid polymer, poly(p‐phenylene benzobisthiazole) (PBZT), was carried out in dilute solution in concentrated methane sulfuric acid (MSA) using silica gels as packing material of a column. Several combinations of the average chain length of the fractionating materials and the average pore diameter of the gels were examined to improve fractionation resolution. The gels with average pore diameter near the average chain length resulted in high fractionation resolution. Single crystals of the fractionated and unfractionated PBZTs were observed by transmission electron microscopy (TEM). Both single crystals were fundamentally composed of rod crystals with the chain orienting normal to the rods. The unfractionated PBZT made a cluster of parallel rod crystals, where longer chains penetrated a few rod crystals leaving their chain ends within the crystalline core. On the contrary, with the fractionated polymer, extended‐chain rod‐like crystals were dispersed, isolated from each other. This morphology enables us to estimate the chain length visibly by TEM, for which a few milligrams of the material is enough for the observation.     

3-methyl-4-metroxy-4'-nitrostilbene (MMONS) Crystal Growth and Studies of It

３－ｍｅｔｈｙｌ－４－ｍｅｔｒｏｘｙ－４＇－ｎｉｔｒｏｓｔｉｌｂｅｎｅ（ＭＭＯＮＳ）ＣｒｙｓｔａｌＧｒｏｗｔｈａｎｄＳｔｕｄｉｅｓｏｆＩｔｓＳｅｃｏｎｄＮｏｎｌｉｎｅａｒＯｐｔｉｃａｌＰｒｏｐｅｒｔｉｅｓ￥ＣＡＯＹａｎｇ；ＺＨＵＺｈｉｄｏｎｇ；ＨＵＡ...     

Influences of Branched Side Chains and Cross‐linking Network on the Solid State Structures of Oligo‐ and Poly (p‐phenyleneethynylene)s

To investigate the influences of side chains and cross‐linking network on the packing fashion and the formation of aggregates and excimers of poly(p‐phenyleneethynylene)s (PPEs) chains in the solid state, a series of cross‐linkable unsubstituted oligo (p‐phenyleneethynylene)s (OPEVs) and alkoxy‐substituted PPEs (EO‐PPEVs) with vinyl end‐groups were synthesized and characterized. By a thermal cross‐linking reaction, cross‐linked polymers were obtained. The oligomer chains in the cross‐linked polymers containing no residual vinyls are packed randomly, forming no aggregates or excimers; however, aggregates and excimers exist in the cross‐linked polymers if they contain residual vinyls. The chains of EO‐PPEVs with sterically hindered side chains form aggregates in films. The network, leading to a pronounced increase of the film photoluminescence quantum yields, can depress these aggregates. These EO‐PPEVs are fully processable and can become insoluble in normal organic solvents after thermal curing; therefore, they are favorable candidates as active layers for fabrication of high performance multilayer devices.     

Crystal Structure and Judd–Ofelt Analysis of Er~(3+) Doped LuAl_3(BO_3)_4 Crystal

Single crystal Er:LuAl_3(BO_3)(Er:Lu AB) is successfully grown using the top-seeded solution growth method with a K_2Mo_3O_(10) flux. The cell parameters of the grown crystal are estimated by an x-ray single crystal diffactometor and x-ray powder diffraction analysis. The result indicates that it still belongs to the space group R32. The obtained unit-cell parameters are a= 9.2793(19) ?, c= 7.210(3) ?, V= 537.65(27) ?~3, and Z=3.The absorption spectrum is measured at room temperature. The spectroscopy properties are investigated based on the Judd–Ofelt(J-O) theory, and the effective J-O parameters were calculated to be Ω_2=8.33×10~(-20),Ω_4=3.83×10~(-20), and Ω_6 =3.55×10~(-20). The emission spectra of Er:LuAB crystal at room temperature are also studied and the ~4I_(11/2)→~4I_(13/2) fluorescence around 3170 nm is observed. The emission cross section calculated by the F-L formula is 8.6×10~(-20) cm~2. These results suggest that the Er:LuAB crystal may be a promising ~3 μm laser material.     

Updated Analysis of Gallium Chelate and Vanadium Chelate Solutions with 4‐(2‐Pyridylazo)Resorcinol and Xylenol Orange

The characteristic factors of the gallium and vanadium chelates with the ligands 4(2pyridylazo)resorcinol (PAR) and xylenol orange (XO) have been determined with the aid of the principle of correction, which makes it possible to eliminate the influence of the surplus ligand in the solution of its chelate with methane (which makes calculation easier) and thereby provides a more acceptable method in comparison with others. The real molar coefficients of extinction of the chelates Ga and V with PAR and XO have been determined and a detailed calculation of the stoichiometric ratios of chelates has been made. The results have shown that the chelates formed have the following structure: Ga(PAR), Ga(XO), V(PAR)₂, and V(XO).     

Structures and energetics of BenGen (n = 1–5) and Be2nGen (n = 1–4) clusters

Cluster geometries and energies of Be_nGe_n (n = 1–5) and Be_2nGe_n (n = 1–4) have been examined in theoretical electronic structure calculations. Structure optimisations were carried out using DFT B3LYP/6-31G(2df) and the energies of the optimum geometries were ordered in QCISD(T) calculations. Be and Ge bond to each other and to other atoms of their own kind, creating a great variety of low-energy clusters in a variety of structural types. Comparisons of the germanide clusters with previously explored silicide and carbide structures reveal some structural similarities, but the germanides have much more in common with the beryllium silicides than with the carbides. However, germanide clusters show a greater tendency to form cage-like structures with potential in technological applications.     

Crystal and Magnetic Structures of Granular Powder Spinel Mn–Zn and Ni–Zn Ferrites

Some specific features of the crystal and magnetic structures of granular powder spinel-like ferrites Mn_0.160Mg_0.404Zn_0.448Fe₂O₄, Mn_0.676Zn_0.227Fe_0.09Fe₂O₄, Mn_0.5792Zn_0.2597Fe_0.1612Fe₂O₄, and Ni_0.32Zn_0.68Fe₂O₄ have been studied by neutron diffraction. It has been established that the crystal structure of all the studied compounds has a cubic symmetry with space group Fd\(\bar 3\)m. Ferrimagnetic ordering is observed in all the studied structures. Based on the experimental data, the unit cell parameters and interatomic bond lengths of the studied compounds are determined alongside with the distribution of cations between octahedral and tetrahedral crystallographic positions in their cubic crystal structure. Corresponding average magnetic moments are calculated for different positions in their cubic structure. Some structural mechanisms of the formation of magnetic properties depending on the level of doping and the size of powder grains are discussed.     

Electrochemical Synthesis and Structure of Poly(2‐methyl‐1‐naphthylamine) Films

A novel polymer, poly(2‐methyl‐1‐naphthylamine), which was synthesized electrochemically at various temperatures from a solution containing 2‐methyl‐1‐naphthylamine, acetic acid and sodium acetate, was characterized by IR spectroscopy. The structural conclusions were based on comparisons of polymer spectra with the IR‐spectrum of the monomer, 2‐methyl‐1‐naphthylamine. IR spectroscopy indicates that the electropolymerization proceeds via the –NH₂ groups and that the poly(2‐methyl‐1‐naphthylamine) structure consists of imine (–N?C) and amine (–NH–C) links between naphthalene rings as well as a free methyl groups in the chains. An analysis of the “substitution pattern” region in the polymer's spectra suggests that the polymer molecules were formed via mixed N–C(4), N–C(5) and N–C(7) linkages between repeated units. The ratio of between the 1645 and 1620 cm^? 1 peak areas decreases with increased temperature during synthesis, indicating that 25°C is the best temperature to obtain higher molecular weights.     

Thermal Behavior of Polyamide‐12 and Poly (Styrene‐Co‐Acrylonitrile) Blend

In this work, an unusual morphology of a mixture of polyamide‐12 (PA‐12) with a series of poly (styrene‐co‐acrylonitrile) (SAN) was obtained by solution casting and fast solvent evaporation. The prepared film was transparent although it contained many crystals. These crystals apparently prevented phase separation despite the instability of the PA‐12 and SAN mixtures below 180°C. In isothermal experiments, once the crystals were melted, phase separation began and the scattered intensity fit the Cahn–Hilliard theory. When the AN content in the SAN copolymer was less than 5%, the phase separation took place when only part of the crystals were melted at 180°C. However, due to the constraint of unmelted crystals, the growth rate of phase separation at this temperature was much slower.     

Photoemission Spectroscopy and Electronic Structures of LiMn2O4

We study the electronic structures of LiMn2O4 by x-ray and ultraviolet photoelectron spectroscopy （XPS, UPS） and resonant photoelectron spectroscopy （RPES）. XPS data suggest that the average oxidation state of Mn ions is 3.55, probably due to the small amount of lithium oxides on the surface. UPS and RPES data imply that Mn ions are in a high spin state, and RPES results show strong Mn3d-O2p hybridization in the LiMn2O4 valence band.     

Photoluminescence of the n+‐n‐i Submicron Structures of Gallium Arsenide

The special features of the photoluminescence of the n ⁺ni submicron structures of gallium arsenide are investigated. It is found that the character of the dependence of the fluorescence intensity on the thickness of the structure is determined by the relationship between three characteristic lengths: diffusional length, thickness of the n ⁺ layer, and depth of absorption of exciting radiation, whereas the decrease in the mobility of charge carriers in epitaxial layers leads to an increase in the fluorescence intensity of the structure, with exciting radiation being strongly absorbed.     

Conformational and Structural Analysis of 6‐(4‐Methoxy‐phenyl)‐1,5,7a‐triphenyl‐tetrahydro‐imidazo[1,5‐b][1,2,4]oxadiazol‐2‐one

Abstract

The cis stereochemistry of 6‐(4‐methoxy‐phenyl)‐1,5,7a‐triphenyl‐tetrahydro‐imidazo[1,5‐b][1,2,4]oxadiazol‐2‐one was studied by use of a PM3 semi‐empirical quantum mechanical model, and x‐ray crystallographic analysis. It crystallizes in the monoclinic space group P2 ₁ /n with a = 10.812(1) Å, b = 16.464(2) Å, c = 13.379(1) Å, α = 90.00°, β = 98.39(1)°, γ = 90.00°, V = 2356.07(4) Å³, Z = 4, D _calc = 1.3067 g cm^?3, F(0 0 0) = 976.41, and μ = 0.086 mm^?1. The structure was solved by direct methods and refined to R = 0.066 for 1257 independent reflections [I > 4σ (I)]. The results from x‐ray diffraction were seen to be generally consistent with the results from previously reported spectroscopic investigations, beside theoretical calculations, except for conformations of five‐membered fused heterocycles. Two inter‐ and intramolecular weak interactions in addition to carbon atoms (C1 and C3) with different chiralities were found in the structure. The conformational study was performed by randomly scanning the potential energy surface belonging to the title compound with respect to selected torsion angles.     

Vibrational Dynamics and Heat Capacity of Trans‐1,4‐Polyisoprene (α‐Form)

Vibrational dynamics of the α‐polymorphic form of trans‐1‐4‐polyisoprene is described using Higg's method and the Urey‐Bradley force field. Characteristic features of dispersion profiles such as repulsion and bunching are reported. A comparison with the β‐form is presented and possible reasons for variation in heat capacity are discussed.     

NMR Studies of Hindered Rotation and Magnetic Anisotropy: The Diels–Alder Adducts of Phencyclone with N‐Phenylmaleimide and N‐(2‐Trifluoromethylphenyl)maleimide. Ab Initio Calculations for Optimized Structures

Abstract

N‐Phenylmaleimide, 2, and N‐(2‐trifluoromethylphenyl)maleimide, 3, were separately added to phencyclone, 1, to yield the corresponding phencyclone Diels–Alder adducts, 4 and 5. The resulting adducts (and some precursors) have been characterized by one‐ and two‐dimensional ¹H and ¹³C NMR at 300 and 75 MHz, and by ¹⁹F NMR at 282 MHz, at ambient temperatures. The NMR data are consistent, for both adducts, with: (a) hindered rotation of the bridgehead unsubstituted phenyl groups about the C(sp²)–C(sp³) bonds, based on slow exchange limit (SEL) spectra and (b) endo adduct configuration based on magnetic anisotropic effects in the ¹H NMR. The NMR spectra of the phencyclone adduct, 4, of N‐phenylmaleimide, indicate free rotation on the NMR timescales (fast exchange limit, FEL spectra) about the N‐phenyl bond. The spectra for the adduct, 5, of N‐(2‐trifluoromethylphenyl)maleimide are interpreted as consistent with SEL regimes, for the N‐aryl rotations, with a single rotamer present in which the trifluoromethyl group is directed “out of” the adduct cavity, and away from the phenanthrenoid moiety. This conclusion is based, in part, on NMR data suggesting the apparent slow N‐aryl bond rotation in a pair of atropisomers corresponding to the acetic acid addition products from the N‐(2‐trifluoromethylphenyl)maleimide. Evidence of magnetic anisotropic effects due to the phenanthrenoid moiety and proximal carbonyls is discussed. ¹H, ¹³C, and ¹⁹F assignments are presented and interpreted. Molecular modeling calculations at the Hartree–Fock level, 6‐31G* basis set, were performed to provide geometry optimizations for energy‐minimized structures of selected compounds.     

Nanostructured Thermosetting Blends of Phenolic Thermosets and Poly(ethylene oxide)‐block‐poly(propylene oxide)‐block‐poly(ethylene oxide) Triblock Copolymer

The amphiphilic triblock copolymer, poly(ethylene oxide)‐block‐poly(propylene oxide)‐block‐poly(ethylene oxide) (PEO‐b‐PPO‐b‐PEO) was incorporated into novolac resin to prepare thermosetting blends. The morphology of the thermosetting blends was investigated by means of atomic force microscopy (AFM) and small‐angle x‐ray scattering (SAXS) and the nanostructures were obtained. It was identified that the reaction‐induced phase separation occurred in the blends of phenolic thermosets with the model poly(propylene oxide) (PPO), whereas poly(ethylene oxide) (PEO) was miscible with novolac resin after and before the curing reaction. In terms of miscibility and phase behavior of the subchains of the triblock copolymer with novolac resin, it was demonstrated that the formation of nanostructures in the thermosets followed a mechanism of reaction‐induced microphase separation.     

Theoretical Analysis of Structures of Ga4N4 Clusters

The structures and energies of a Ga4N4 cluster have been calculated using a full-potential linear-muffin-tin-orbital molecular-dynamics (FP-LMTO MD) method. We obtained twenty-four structures for a Ga4N4 cluster. The most stable structure we obtained is a C8 three-dimensional structure, the energy of which is lower than that of the C2v symmetry structure proposed by Kandalam et al. [J. Phys. Chem. B106 (2002) 1945] The calculated results show that the isomer with an N3 subunit is preferred, supporting the previous result made by Kandalam et al,We found that the most stable structure of Ga4N4 clusters presented semiconductor-like properties through the calculation of the density of states.     

Crystal structure,spectroscopy and magnetism of binuclear complexes of mercury and lanthanides; the Ln(NCS)(HMPA)4(μ-SCN)2HgCl(SCN) type

A series of lanthanide compounds of type Ln(NCS)(HMPA)₄,(μ-SCN)₂HgCl(SCN) (Ln = Pr, Nd, Eu) were synthesized and grown in the form of single crystals.

The crystal structure of the neodymium complex was determined by X-ray diffraction. Its space group is Cc, with the following unit cell parameters; a = 17.338(3) Å, b = 15.795(3) Å, c = 21.828(4) Å, β = 107.65(3)°. The structure has an unexpected architecture in which one Cl^? ion, four SCN^? ions, and four oxygen atoms of HMPA groups are engaged in the metal ion coordination.

The binuclear complex is composed of two types of subunits; seven coordinated Nd (III) and four coordinated Hg (II). The results obtained were compared with the earlier published data on the crystal structures of polynuclear complexes with ions of the IIa group (Zn or Cd). Luminescence, excitation of luminescence and absorption spectra of lanthanide (Pr, Nd, Eu) single crystals, as well as vibrational IR and Raman spectra at 293, 77 and 4K, were recorded. Non-trivial results of reabsorption of the d-level of Pr(III) emission by ³H₄ → ³ P_J, ₁D² transitions were observed with simultaneous detection of emission from the ³P₀ level after excitation in the UV region. The experimental oscillator strengths of the transitions were determined from the absorption spectra and parametrized in terms of the Judd-Ofelt intensity parameters Ω_λ (λ = 2, 4, 6).

Satisfactory results for the calculation with low errors of estimation of the parameters were obtained for a crystal of the Nd-Hg compound, which reproduced the intensities of the electronic transitions well. Positive values of Ω_λ were evaluated for Pr(III) after including the ³H₄ → ³F₂ hypersensitive transition (obeying selection rules δJ = 2, δL = 2) in the calculations.

Based on the above results, the radiative rate constant can be determined. Strong vibronic components were found in the low temperature spectra for both types of ligands involved in metal ion coordination. The vibronic transitions are mainly associated with modes of groups directly coordinated to the metal ions. Electron-phonon coupling including the resonant vibronic effect was analysed based on IR and Raman data.

Magnetic susceptibility measurements were carried out down to 1.7 K. Correlation of the spectra and magnetic properties with details of the structure of the title compound was studied.     

Spectroscopic and Conductance Studies of New Transition Metal Complexes with a Schiff Base Derived from 4‐Methoxybenzaldehyde and 1,2‐bis(p‐Aminophenoxy)ethane

Four new metal complexes of Cu(II), Ni(II), Zn(II) and Co(III) with Schiff base derived from 4‐methoxybenzaldehyde and 1,2‐bis(p‐aminophenoxy)ethane have been prepared and characterized by magnetic susceptibility, conductance measurements, elemental analyses, UV–Vis, ¹H NMR and IR spectra studies. The magnetic and spectroscopic data indicate an octahedral geometry for the six‐coordinate complexes. The ligand was used for complexation studies. Stability constants were measured by means of a conductometric method. Furthermore, the stability constants for complexation between ZnCl₂, Cu(NO₃)₂ and AgNO₃ salts and ligand (L) in 80% dioxane–water and pure methanol were determined from conductance measurements. In 80% dioxane–water, he stability constants (log Ke) increase inversely with the crystal radii in the order Ag(I) < Zn(II) < Cu(II).     

Effect of Non‐Ideal Mixed Solvents on Dimensions of Poly(N‐Vinylpyrrolidone) and Poly(Methyl Methacrylate) Coils

An addition of a small amount of non‐solvent tetrahydrofuran (THF) to good solvent water gave rise to a strong solvent power for poly(N‐vinylpyrrolidone) (PVP). It was found that PVP coils in mixtures of water and THF first swelled as the fraction of THF was increased, and then the coils contracted after a critical composition of the solvent mixture based on the measurement of dilute solution viscosities. It was reached that the power of the mixed solvents was not the simple average of the power of individual components. The influence of the non‐ideal mixing of water and THF on the power of these mixtures for PVP and the dimensions of PVP coils was taken into account. Especially the formation of pseudo‐clathrate hydrate structure with the composition φ _THF ≈ 0.44 was found to be an important factor to change the solvation and dimensions of PVP coils. Some other solvent mixtures for PVP and poly(methyl methacrylate) (PMMA) were also found to be non‐ideal mixtures. The viscosities of these solvent mixtures could show positive or negative deviation from the values obtained from the addition rule. It was shown again that the influence of the non‐ideality of these solvent mixtures on the dimensions of polymer coils was great. The action of mixed solvents changed the dimension of polymer coils, not only because of excluded volume effects but also because of the different molecular interactions present in these mixed solvents.     

Solvent Dependence of Tautomeric Equilibria of 1‐(o‐Substituted Phenyl)Barbituric and ‐2‐Thiobarbituric Acid Derivatives

Abstract

The enolisation tendencies of 1‐(o‐substituted phenyl)barbituric and ‐2‐thiobarbituric acid derivatives have been studied by observing the behaviour of the compounds in different solvents by ¹H and ¹³C NMR. It has been found that the enolisation tendencies of the thiobarbituric acid derivatives observed in polar solvents are greater than those of the barbituric acid derivatives. The ratio of keto–enol tautomers of thiobarbituric acid derivatives in DMSO and in DMF has been calculated.