Steady state and time resolved laser-induced fluorescence of garlic plants treated with titanium dioxide nanoparticles

The study involves investigation of the effect of the interaction of titanium dioxide nanoparticles with garlic plant by spectroscopy techniques. For this, garlic plants have been grown in the laboratory under controlled conditions of light flux, temperature, humidity, and nutrient media. The growth and biomass parameters in terms of shoot length, fresh, and dry mass are found to increase upon the treatment of titanium dioxide nanoparticles while a reduction is observed in the root length of the garlic plants. The steady state laser-induced fluorescence, time resolved laser-induced fluorescence, and ultraviolet visible spectra of the control and titanium dioxide nanoparticles-treated plants have been acquired. The curve fitting data reveal that titanium dioxide nanoparticles decrease the intensity and fluorescence intensity ratio of red and far red chlorophyll fluorescence bands indicating increase in the photosynthetic activity and chlorophyll content. The evaluation of life time of the excited chlorophyll molecule shows that life time is effected by the treatment of the titanium dioxide nanoparticles. The results pertaining to ultraviolet visible measurement indicate increase in the concentration of chlorophyll a, chlorophyll b, total chlorophyll, carotenoid, and quercetin in the leaves of garlic plants treated with titanium dioxide nanoparticles.     

Radical detection in harsh environments by means of laser-induced fluorescence using a single bidirectional optical fiber

A new experimental method is described enabling detection of hydroxyl radicals (OH) by laser-induced fluorescence in high-temperature gas-phase reactions. This is accomplished by means of a bidirectional optical fiber probe, which is of interest for applications where optical access is limited. An optical setup that allows simultaneous excitation and detection of fluorescence using one and the same fiber has been developed. Complications resulting from coupling as well as laser-induced scattering are addressed, and different fibers are compared with regard to core material composition and geometric collection efficiency. On this basis, a suitable fiber is identified, and OH detection and profile measurements are demonstrated in a premixed laminar flame as reference experiment.     

Laser-Induced Fluorescence Imaging and Spectroscopy of GFP Transgenic Plants

Green fluorescent protein (GFP) and other fluorescent protein bioreporters can be used to monitor transgenes in plants. GFP is a valuable marker for transgene presence and expression, but remote sensing instrumentation for stand-off detection has lagged behind fluorescent protein marker biotechnology. However, both biology and photonics are needed for the monitoring technology to be fully realized. In this paper, we describe laser-induced fluorescence imaging and laser-induced fluorescence spectroscopy of GFP-transgenic plants in ambient light towards the application of remote sensing of transgenic plants producing GFP.     

A method to measure electric field strengths in an argon glowdischarge plasma using laser spectroscopy

A method for electric field measurement based on laser spectroscopy of argon atoms has been developed and calibrated. Measurements were made using both laser optogalvanic spectroscopy and laser-induced fluorescence spectroscopy. Measurements using several different transitions in argon were carried out, and it was found that the 4s→7f and 4s→8f transitions were the most suitable for measurements in the sheath region of glow discharges. The lower limit for electric field measurements was estimated to be 500 V/cm. A minimal pressure of about 100 mtorr was required to detect optogalvanic signals and about 1 torr was required for the fluorescence signals to be detectable. These detection limits make this method applicable for measurement of sheath electric fields for a wide range of discharge conditions     

Measurement of radiative lifetime in atomic samarium using simultaneous detection of laser-induced fluorescence and photoionization signals

In this paper, we report the investigations of lifetime measurement of odd-parity energy level 19009.52 cm^?1 of Sm I using simultaneous detection of laser-induced fluorescence and laser-induced photoionization signals employing pump–probe technique. To the best of our knowledge, this is for the first time that the results obtained using laser-induced fluorescence and photoionization techniques have been compared with each other. The obtained results match well with those reported in the literature.     

Single laser detection of CO and OH via laser-induced fluorescence

Two-photon laser-induced fluorescence detection of carbon monoxide with excitation in the Fourth Positive System near 280 nm is demonstrated in carbon monoxide/nitrogen mixtures at ambient conditions and in a methane/air Bunsen flame. Fully resolved rotational spectra are presented for the A–X (5,0) and (4,0) bands near 279 and 284 nm, respectively. Energy transfer from excited molecular nitrogen to carbon monoxide with subsequent fluorescence from carbon monoxide that was reported for low pressure conditions in the literature has also been observed at atmospheric conditions. It was further demonstrated that overlaps of some CO A–X (4,0) rotational lines with OH A–X (1,0) rotational lines allow simultaneous excitation of both species with a single laser. The fluorescence bands are completely separated, enabling detection without crosstalk. Detection limits are adequate to detect CO in nascent state in a flame and it is expected that for application in high-pressure, low-temperature combustion environments, where high quantities of CO are present, this approach can provide advantages compared to the excitation of CO at shorter wavelengths due to decreased laser beam attenuation.     

Vacuum ion source diagnostics at the Tokyo Institute of Technology

After a brief review of various diagnostics for vacuum ion sources measured data are presented for the particle distributions within the anode/cathode gap regions using passive spectroscopy, active laser interferometry, and resonant laser-induced fluorescence, while the extracted ion beams were observed by particle track detectors of both time-integrated and time-resolved types. Also measured were the prompt gamma-rays and the D-D neutrons when the beams hit the targets. The experimental arrangements of these diagnostics, together with some examples of the typical results obtained, are shown. It is discussed how various kinds of particles were distributed within the ion diodes, and how they were extracted from the source regions     

Oxygen-distribution imaging with a novel two-tracer laser-induced fluorescence technique

We introduce a new technique for imaging oxygen concentrations in fuel/air mixtures that takes advantage of the different responses of toluene and 3-pentanone to collisional quenching by molecular oxygen. Since laser-induced fluorescence signals from both tracers upon excitation at 248 nm are spectrally well separated, simultaneous detection is possible. The technique is first applied to instantaneous imaging in turbulent mixing processes of interacting seeded air and nitrogen flows. Received: 1 August 2001 / Revised version: 29 October 2001 / Published online: 29 November 2001     

Attenuation corrections for in-cylinder NO LIF measurements in a heavy-duty Diesel engine

Quantification of the nitric oxide (NO) concentration inside the cylinder of a Diesel engine by means of laser-induced fluorescence (LIF) measurements requires, amongst others, knowledge of the attenuation of the ultraviolet radiation involved. We present a number of laser diagnostic techniques to assess this attenuation, enabling a correction for laser intensity and detection efficiency of the raw NO LIF data. Methods discussed include overall laser beam transmission, bidirectional laser scattering (bidirectional LIF), spectrally resolved fluorescence imaging, and Raman scattering by N₂. A combination of techniques is necessary to obtain the complete attenuation of laser beam and NO fluorescence. The overall laser beam transmission measurements and bidirectional LIF measurements (the latter yielding spatially resolved transmission) provide evidence of a non-uniform attenuation distribution, with predominant attenuation within or near the piston bowl. Fluorescence imaging of multiple vibrational bands through a spectrograph is shown to be a powerful method for obtaining spatially resolved data on the transmission losses of fluorescence. Special attention is paid to the role of CO₂ and O₂ as UV light absorbers, and the consequences to different excitation-detection schemes for NO. PACS 82.33.Vx; 42.62.Fi; 33.20.t     

THz radiation sensors

In the paper, issues associated with the development and exploitation of terahertz (THz) radiation detectors are discussed. The paper is written for those readers who desire an analysis of the latest developments in different type of THz radiation sensors (detectors), which play an increasing role in different areas of human activity (e.g., security, biological, drugs and explosions detection, imaging, astronomy applications, etc.). The basic physical phenomena and the recent progress in both direct and heterodyne detectors are discussed. More details concern Schottky barrier diodes, pair braking detectors, hot electron mixers, and field-effect transistor detectors. Also the operational conditions of THz detectors and their upper performance limits are discussed.     

基于激光诱导荧光的油类污染物检测系统研究

油类污染物具有破坏海洋生态系统和间接污染大气及土壤的危害,快速、准确地检测污染物的成分及其浓度具有重要意义。由于油类污染物光谱重叠严重,因此难以通过传统荧光分析准确加以区分。本文基于激光诱导荧光技术,以氙灯作为激发光设计荧光光谱检测系统,并对0#柴油、92#汽油和煤油进行扫描和检测,从而获得激发/发射光谱以及最佳激发/发射波长。并对该系统的软件算法部分进行改进,运用Savitzky-Golay卷积平滑直接获得更加精确的激发/发射光谱,更能全面、准确地反映油类物质的荧光特性信息。并与传统的荧光光谱仪得到的光谱图进行对比,经实验验证激光诱导荧光技术的荧光光谱检测系统的有效性,对油类污染物的荧光光谱信号的检测具有更高的灵敏度。     

The use of nuclear track detectors as an environmental solar ultraviolet radiation dosimeter

Investigation of using CR-39 nuclear track detectors as solar ultraviolet radiation (SUVR) dosimeter was studied. The nuclear track detectors were irradiated with Cf-252 (alpha and fission fragments) before exposure to sun light. The exposure of nuclear track detectors to SUVR were carried out under two different conditions (i) the detector was mounted on a solar tracker mechanism which always rotate towards the sun, and (ii) fixed on a horizontal surface. The measurements were performed for different periods extended from one to eight weeks continuously at Dhahran - Saudi Arabia. The period extended from the middle of July to middle of September: the hottest months in Saudi Arabia. The weekly integrated SUVR measured by Eppley sensor was ranged from 2400 W. h. m⁻² for one week up to 21000 W.h.m⁻² for eight weeks. The results indicate linear correlation between both the track diameters of alphas and fission fragments and the total exposure to SUVR. The results clearly demonstrate that it is possible to use the nuclear track detectors as an environmental and personal SUVR dosimeters.     

Cinematographic imaging of hydroxyl radicals in turbulent flames by planar laser-induced fluorescence up to 5 kHz repetition rate

Temporally resolved measurements of transient phenomena in turbulent flames, such as extinction, ignition or flashback, require cinematographic sampling of two-dimensional scalar fields. Hereby, repetition rates must exceed typical flame-inherent frequencies. The high sensitivity planar laser-induced fluorescence (PLIF) has already proved to be a practical method for scalar imaging. The present study demonstrates the feasibility of generating tuneable narrowband radiation in the ultraviolet (UV) spectral range at repetition rates up to 5 kHz. Pulse energies were sufficiently high to electronically excite hydroxyl radicals (OH) produced in a partially-premixed turbulent opposed jet (TOJ) flame. Red-shifted fluorescence was detected two-dimensionally by means of an image-intensified CMOS camera. Sequences comprising up to 4000 frames per run were recorded. Besides statistically stationary conditions, extinction of a turbulent flame due to small Damköhler numbers is presented showing the potential of the technique.     

含萘荧光单体和聚合物的紫外和荧光分析

分别用紫外分光光度法和荧光光谱法对含萘荧光单体2-(甲基丙烯酰氧)-N,N-二甲基-N-(1-萘甲基)乙基氯化铵和相应的聚合物进行检测。在λmax=222nm下测定不同浓度的含萘荧光单体和聚合物的吸光度,线性相关系数均为0.9995。同时在λex=222nm和λem=332nm条件下研究两者的荧光光谱,样品浓度与荧光强度成良好线性关系,相关系数可达0.9998。对比两种分析方法表明,两者的荧光测定检出限相对较低,操作简单快捷,准确性和可行性高,可很好地监测水处理剂中聚合物的含量,从而实现水处理系统在线检测和自动控制。     

Detection of hepatocarcinoma in rats by integration of the fluorescence spectrum: Experimental model

The incorporation of spectroscopic techniques into diagnostic procedures may greatly improve the chances for precise diagnostics. One promising technique is fluorescence spectroscopy, which has recently been used to detect many different types of diseases. In this work, we use laser-induced tissue fluorescence to detect hepatocarcinoma in rats using excitation light at wavelengths of 443 and 532 nm. Hepatocarcinoma was induced chemically in Wistar rats. The collected fluorescence spectrum ranges from the excitation wavelength up to 850 nm. A mathematical procedure carried out on the spectrum determines a figure of merit value, which allows the detection of hepatocarcinoma. The figure of merit involves a procedure which evaluates the ratio between the backscattered excitation wavelength and the broad emission fluorescence band. We demonstrate that a normalization allowed by integration of the fluorescence spectra is a simple operation that may allow the detection of hepatocarcinoma.     

纳秒激光诱导空气等离子体的红外辐射特性研究

纳秒激光诱导空气等离子体存在从紫外、可见、近红外乃至射频微波的宽谱段辐射,但目前的研究大多关注紫外到可见波段的光谱辐射。激光等离子体作为一种新型的红外辐射源具有很多优势,相比于红外干扰弹以及红外干扰手段而言,空气等离子体红外辐射源可以灵活布置,成本低廉,因此研究空气等离子体的红外辐射特性就很有必要。针对目前脉冲激光诱导空气等离子体的红外干扰研究需要,对激光波长为532 nm的纳秒脉冲激光诱导空气等离子体的红外辐射特性进行实验研究,探讨激光能量对空气等离子体红外辐射强度的影响规律,以及空气等离子体红外辐射的角度分布特性,分析了等离子体红外辐射的可能产生机制。实验结果表明,激光诱导空气等离子体在950～1 700 nm范围内的红外光谱为线状谱和连续谱的叠加。其中线状谱主要是氮和氧的中性原子谱线,并且氮原子红外辐射占主导。随着激光能量的增加,由于空气击穿产生的氧和氮原子数量增加,导致空气等离子体红外辐射的谱线强度逐渐增大。随着红外探测角度的变化,在探测角度为75°时,OⅠ 1 128.63 nm和NⅠ1 246.96和1 362.42 nm谱线强度达到最大,在探测角度为120°时,NⅠ 1 011.46和1 053.96 nm谱线强度达到最大,这是因为空气等离子体红外辐射强度随探测角度变化呈现空间非对称性,表明空气等离子体内不同粒子的空间分布呈现非对称性。     

The advantages of using digital signal processing in polarized x‐ray fluorescence analysis

Improving the specificity and productivity of XRF is of great relevance for the determination of trace elements in samples of diverse origin. The advantages of using digital signal processing in energy‐dispersive polarized x‐ray fluorescence analysis are demonstrated by comparing the instrumental sensitivities achieved with those obtained by using a conventional analogue signal processing‐based spectrometer. A compact geometry secondary target arrangement was designed to increase the effective solid angles and to reduce the distances between secondary target, sample and detector, thus achieving larger x‐ray fluxes for both the excitation and detection process, resulting in improved instrumental sensitivities. The performance of both spectrometers was evaluated for two different detectors: an Si(Li) detector and a thermoelectrically cooled passivated‐implanted planar silicon detector (X‐PIPS). The uncertainties achieved and accuracy are illustrated for the analysis of a group of sediment and organic‐origin certified reference materials using two different quantitative procedures. Copyright © 2006 John Wiley & Sons, Ltd.     

机油类产品激光诱导荧光时间特性的研究

介绍了一种由三倍频Nd∶YAG激光器、单色仪、光电倍增管以及信号采集处理系统构成的激光荧光谱寿命测量系统及其测量原理和方法,讨论了如何去除激发光脉冲宽度和探测系统响应速度对测量结果的影响,并实际测量了一种应用广泛的燕山机油的荧光谱寿命.本系统具有简便、快捷、准确以及成本低等优点,适合用于未来实用化机载水面监测激光荧光雷达遥感系统中 关键词： 激光诱导荧光 荧光寿命 Nd∶YAG激光器 光电倍增管     

Influence of ambient gas on formation process of Si nanoparticles by laser ablation

We described the influence of a type of gas and its pressure upon the size distribution of Si nanoparticles fabricated by laser ablation in an ambient gas and the plume dynamics during the synthesis. The plume dynamics was investigated by laser-induced fluorescence and ultraviolet Rayleigh scattering. Based on the results, the importance of the gas flow within the ablation plume in the formation of the nanoparticles is understood.     

A study of the spatial and temporal evolution of auto-ignition kernels using time-resolved tomographic OH-LIF

In this paper, the spatial and temporal evolution of auto-ignition kernels from methane jets propagating into a NO_x-vitiated, high-turbulence, hot air co-flow was studied by means of time-resolved tomographic laser-induced fluorescence of OH (Tomo OH-LIF). Measurements were performed using a burst dye laser system at 10 kHz for volumetric laser illumination and a multi-camera arrangement (8-views) for detection of the fluorescence signal. Auto-ignition kernels were detected three-dimensionally and tracked using a robust algorithm based on the intensity gradient of the volumetrically reconstructed signals. The size and location of the detected kernels were evaluated for operating conditions with different Reynolds numbers of the fuel jet. Results showed that auto-ignition randomly occurred with high probability in a well defined fairly axisymmetric radial region with strong fluctuations in the main direction of the flow. The increase of the Reynolds number of the fuel jet resulted in a radial spread of the location of auto-ignition events. The statistical evaluation of the orientation and growth of auto-ignition kernels with respect to the mean flow field showed that the kernels were oriented tangentially to the flow and temporally evolve towards this preferential direction as the ignition events progressed.