Synthesis and Characterization of New Light Emitter Symmetrical Phenoxazinium Salt and Its Potential Application as Sensor for Assessment of Hg2+

The sensitization of the excited triplet state of a novel symmetrical Bis(dialkylamino)phenoxazinium salt was developed in the presence of Hg²⁺. This effect was used to determine the concentration of Hg²⁺ in different water samples. The phenoxazinium salt sensor was characterized by different spectroscopic tools such as: UV, FTIR, NMR and fluorescence spectra. The sensor has an emission band at 347 nm in DMSO. Hg²⁺ in DMSO at pH 5.6 can remarkably quench the fluorescence intensity of the sensor at 347 nm and a new band was appeared at 436 nm due to the strong complex formation between Hg²⁺ and sensor. The quenching of the band intensity at 347 and the enhancement of the intensity of the new band at 436 were used to determine the Hg²⁺ in different waste water samples. The dynamic range found for the determination of Hg²⁺ concentration is 8.7?×?10^-10 – 1.4?×?10^-6 mol L^?1 with a detection limit of 5.8?×?10^?10 mol L^?1 and quantification detection limit of 1.8?×?10^-9 mol L^-1.     

Study on the Cofluorescence Effect of Europium (III)–Yttrium (III)–Balofloxacin–Sodium Dodecyl Sulfate System and Its Analytical Application

A new fluorescence enhancement phenomenon in the europium(III)–balofloxacin–sodium dodecyl sulfate system was observed when yttrium(III) was added. Based on this, a sensitive cofluorescence assay for the estimation of balofloxacin was established. Under the optimized conditions, the enhanced fluorescence signal was linear over the concentration of balofloxacin ranging from 3.0 × 10^?9 to 7.0 × 10^?6 mol L^?1 with a correlation coefficient of 0.9993. The detection limit (3 σ) was determined as 8.3 × 10^?10 mol L^?1. The presented method was successfully applied to determination of balofloxacin in pharmaceutical preparations, human serum, and urine. The possible fluorescence enhancement mechanism was also discussed.     

A Novel Colorimetric and Fluorescent “Off-On” Chemosensor for Cu2+ Based on a Rhodamine Derivative Bearing Naphthyridine Group

A new rhodamine-based derivative bearing a naphthyridine group (compound 1) was synthesized as a colorimetric and fluorescent “off-on” chemosensor for Cu²⁺ in aqueous solutions. The sensing behaviors of 1 toward various metal ions in neutral aqueous solutions were investigated by absorption and fluorescence spectroscopies. Compound 1 is found to exhibit a significant increase in absorbance at 561 nm and an amplified fluorescence at 590 nm toward Cu²⁺ in a selective, sensitive and rapid manner. The quantification of Cu²⁺ by 1 using an absorption spectroscopy method was satisfactory in the linear working range 0.9–10 μM, with a detection limit of 5.4?×?10^?8?M for Cu²⁺ and good tolerance of other metal ions. Upon addition of Cu²⁺, the spirolactam ring (colorless and nonfluorescent) of 1 was opened to ring-opened amide (red color and fluorescent) and a 1:1 stoichiochemetry for the 1-Cu²⁺ complex was formed with an association constant of 1.57?×?10⁴?M^?1.     

A Novel Method for the Assessment of Cortisol Hormone in Different Body Fluids Using A New Photo Probe Thiazole Derivative

A low cost and accurate method for the detection and analytical determination of the cortisol in pharmaceutical preparation, blood serum and urine was developed. The method was based upon the enhancement of fluorescence intensity of the band at 424 nm of the photo probe by different cortisol concentrations in acetonitrile at (pH 5.7, λ_ex?=?320 nm). The influence of the different parameters, e.g. pH, solvent, cortisol concentration and foreign ions concentrations that control the enhancement process of fluorescence intensity of the band of photo probe was critically investigated. The remarkable enhancement of the fluorescence intensity at 424 nm in acetonitrile by various concentrations of cortisol was successfully used as a photo- probe for the assessment of cortisol concentration. The calibration plot was achieved over the concentration range 8.0?×?10^?6–5.5?×?10^?9 mol L^?1 cortisol with a correlation coefficient of 0.998 and a detection limit of 4.7?×?10^?9 mol L^?1. The developed method is simple and proceeds without practical artifacts compared to the other determination methods.     

Fluorescent carbon dots: facile synthesis at room temperature and its application for Fe<Superscript>2+</Superscript> sensing

A new route for one-pot preparation of carbon dots (CDs) was developed at room temperature using PEG400 as both the carbon source and passitive agent. The new method possesses the advantages of facile, rapid, energy-saving, without any external stimulus and environment friendly. By changing the content of NaOH, the PEG400-CDs with blue-emitting, yellow-emitting, orange red-emitting and red-emitting were obtained, and the formation mechanism were carefully investigated. In addition, a sensitive fluorescence sensor were developed for Fe²⁺ detection based on PEG400-CDs since the fluorescence of PEG400-CDs could be enhanced by Fe²⁺. It was found that there is a good linear relationship between the enhanced fluorescence and Fe²⁺ concentration in the range of 0.5 to 2.0 μmol·L^?1 with the detection limit of 6.0 × 10^?8 mol·L^?1, and Fe²⁺ in water samples was also determined with high accuracy and repeatability.     

A calix[4]arene derivative-doped perchlorate-selective membrane electrodes with/without multi-walled carbon nanotubes

In this study, poly (vinyl chloride)(PVC) membrane electrodes with/without multi-walled carbon nanotubes (MWCNTs) based on a calix[4]arene derivative for perchlorate ion were described. The influence of membrane composition, pH, conditioning solution on the potentiometric response of the electrodes was investigated. Perchlorate-selective PVC membrane electrode exhibited a slope of 47.8 ± 0.6 mV/pClO₄ in the range of 1.0 × 10^?7–1.0 × 10^?1 mol L^?1at pH 4.0 while the coated Pt electrodes with MWCNT-OH, MWCNT-COOH and MWCNT displayed slopes of 46.1 ± 0.7 mV/pClO₄ (5.0 × 10^?6–1.0 × 10^?1 mol L^?1), 50.4 ± 1.9 mV/pClO₄ (1.0 × 10^?6–1.0 × 10^?1 mol L^?1) and 44.4 ± 0.3 mV/pClO₄ (1.0 × 10^?5–1.0 × 10^?1 mol L^?1), respectively. Other response characteristics of these electrodes such as response time, lifetime and detection limit were identified, and the selectivity coefficients towards various anions were calculated by separate solution method. Moreover, the perchlorate-selective electrodes described here were successfully used as an indicator electrode for the determination of perchlorate in real samples such as tap water, river water and human urine by direct calibration method.     

A New Piperidine Derivatized-Schiff Base Based “Turn-on” Cu<Superscript>2+</Superscript>Chemo-Sensor

In this study, we report the synthesis of new Schiff base E-1-(((1-benzylpiperidin-4-yl)imino)methyl)naphthalenee-2-ol (L) and evaluation of its fluorescence response toward Cu²⁺ ion. Preliminary, solvent effect, metal selectivity and metal ligand ratio were analyzed through UV-Visible study. Fluorescence response toward Cu²⁺ was carried to assess the fluorescent property of synthesized Schiff base. The probe exhibited a higher fluorescence enhancement in the presence of Cu²⁺ over other metal ions (Ni²⁺, Zn²⁺, Hg²⁺, Co²⁺, Cd²⁺, Al³⁺, Fe²⁺, and Pb²⁺). The binding stoichiometry between L and Cu²⁺ has been investigated using Job’s plot and Benesi-Hildebrand equation and it was found that ligand L can form 1:1 L-Cu²⁺ complex with binding constant (K _a) of 4?×?10⁴ LM^?1.     

Fluorescence Chemosensor for Determination of Carbon Dioxide and Its Application for Biodegradation Analysis of Polymers

A novel fluorescence sensor has been developed and applied for the determination of carbon dioxide released from the biodegradation of polymer materials and for the evaluation of the biodegradability of polymers. The proposed analytical method is based on the extraordinarily quenching effect of carbonate on fluorescence signal of N,N-diphenylthiourea system. Under the optimized experimental conditions, the fluorescence quenching system performed satisfactorily in a linear detection concentration ranging from 2.00 × 10^?4 to 9.00 × 10^?3 mol L^?1 of carbonate. The detection limit is 8.33 × 10^?5 mol L^?1 for carbonate. This proposed fluorescence system for the selective sensing of carbonate has been successfully applied to determine the biodegradability of polybutylene succinate and related polymers under controlled composting environment with devices assembled in our laboratory. The results exhibited that the biodegradation rate and final biodegradation percentage of biodegradable thermoplastic poly(ester urethane) elastomers, which embodies the block copolymer of poly(butylene succinate) with poly(diethylene glycol succinate), were correlated to the amount of poly(diethylene glycol succinate). In addition, the maximum biodegradation percentage of the testing polymers has reached 45.01%. This research demonstrates the development of chemosensors for rapid, selective, and sensitive detection of carbon dioxide is important and significant for both environmental and biological science.     

A selective sensor for nanolevel detection of lead (II) in hazardous wastes using ionic-liquid/Schiff base/MWCNTs/nanosilica as a highly sensitive composite

An effective potentiometric sensor had been fabricated for the rapid determination of Pb²⁺ based on carbon paste electrode consisting of room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆), multiwalled carbon nanotubes (MWCNTs), nanosilica, synthesized Schiff base, as an ionophore, and graphite powder. The constructed nanocomposite electrode showed better sensitivity, selectivity, response time, response stability, and lifetime in comparison with typical Pb²⁺ carbon paste electrode for the successfully determination of Pb²⁺ ions in water and in waste water samples. The best response for nanocomposite electrode was obtained with electrode composition of 18% ionophore, 20% BMIM-PF₆, 49% graphite powder, 10% MWCNT, and 3% nanosilica. The new electrode exhibited a Nernstian response (29.76?±?0.10 mV decade^?1) toward Pb²⁺ ions in the range of 5?×?10^?9?C1.0?×?10^?1 mol L^?1 with a detection limit of 2.51?×?10^?9 mol L^?1. The potentiometric response of prepared sensor is independent of the pH of test solution in the pH range of 4.5?C8.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition, and heavy metal ions.     

A Chemosensing Ensemble for the Detection of Cysteine Based on the Inner Filter Effect Using a Rhodamine B Spirolactam

A fluorescent chemosensing ensemble for the detection of cysteine is designed based on the fluorescence inner filter effect. The method employs the coordination of Cu²⁺ ion with salicylaldehyde rhodamine B hydrazone (I), a colorless and non-fluorescent rhodamine B spirolactam derivative to form I-Cu(II), a pink color but weakly fluorescent complex. When rhodamine B was introduced to the I-Cu(II) complex solution, the fluorescence signal of rhodamine B is dramatically decreased because of the fluorescence inner filter effect (IFE). Upon adding cysteine to the above solution, it can complex preferentially to Cu²⁺ compared to I, and the I-Cu(II) complex dissociates, which thus decreases the fluorescence IFE of the solution, and in turn leading to the fluorescence increase of the chemosensing system. Based on the above mechanism, a fluorescent chemosensing ensemble for cysteine is developed. The fluorescence increase is linearly with cysteine concentration up to 10.0 μ mol L⁻¹, with a detection limit of 1.4 × 10⁻⁷ mol L⁻¹ (3σ). The optimal conditions of the proposed method were studied and the selectivity of the proposed method was investigated in this paper.     

A Rhodamine-Based “Off-On” Colorimetric and Fluorescent Chemosensor for Cu(II) in Aqueous and Non-aqueous Media

A new rhodamine derivative (RhB-NSal) bearing an electron-withdrawing group –NO₂ at the 5-position of 2-hydroxyphenyl moiety was synthesized and its sensing behaviors for Cu²⁺ in acetonitrile and aqueous acetate-buffer/acetonitrile (2/3, v/v, pH 4.8) media were investigated. In each medium, significant absorption and fluorescence enhancements accompanied by an instant color change from colorless to pink were observed for RhB-NSal upon addition of Cu²⁺. RhB-NSal binds with Cu²⁺ forming a 1:1 stoichiometric complex with an association constant of 6.72 (±0.03) × 10⁴ M^?1 and 4.23 (±0.03) × 10⁴ M^?1, respectively. RhB-NSal displayed high selectivity for Cu²⁺ over possibly competitive metal ions except that Fe³⁺ and Bi³⁺ ion can respectively bring about a little interference in absorption and fluorescence with its sensing for Cu²⁺. In dry acetonitrile, pronounced enhancements in the absorbance and emission of RhB-NSal were induced by Cu²⁺, with a detection limit of 0.49 μM, exhibiting higher sensitivity than that of a known analogue bearing no substituent on its phenol ring, RhB-Sal. In aqueous solution, RhB-NSal displayed likewise a high selectivity but a lower sensitivity for Cu²⁺ than that in acetonitrile, with a detection limit of 14.98 μM, still more sensitive than RhB-Sal in absorption. By virtue of these properties, RhB-NSal could be used as an “Off-On” fluorescent and colorimetric chemosensor for Cu²⁺ in acetonitrile medium, and be developed to be a promising candidate of “Off-On” eye-naked chemosensor for Cu²⁺ in a weakly acidic aqueous medium.     

Studies on Interaction of Norfloxacin,Cu<Superscript>2+</Superscript>, and DNA by Spectral Methods

The interactions of norfloxacin (NFA), DNA, and Cu²⁺ are studied by fluorescence and UV-spectra method. According to the experimental results, it can be concluded that NFA can form a steady binary complex with Cu²⁺. There is a linear relationship between the Fluorescence intensity of the norfloxacin–Cu²⁺–DNA system and the concentration of DNA. And when the concentration of the NFA is 1.95×10⁻⁵ mol L⁻¹, they possess a good linearity in the concentration of DNA ranged from 4.7×10⁻⁶ to 2.8×10⁻⁵ mol L⁻¹.It is a good method due to the high sensitivity and selectivity.     

Rapid and Direct Spectrofluorometric and Chemometrics Methods for the Simultaneous Determination of Two Dansyl Derivatives

ABSTRACT

In this study the simultaneous molecular spectrofluorometric determination of ultratrace amounts of two dansyl chloride derivatives, DMNPS (5-(dimethylamino)naphthalene-1-sulfonyl 4-phenylsemicarbazide) and DMNPH (2-(5-(dimethylamino)naphthalen-1-ylsulfonyl)-N-phenylhydrazinecarbothioamide), was accomplished using a genetic algorithm joint partial least squares (GA-PLS) technique that leads to very low detection limits (lower than 10^?6 mol/L) The linear dynamic ranges of the compounds were 1–6 µ mol L^?1 and 1–7 µ mol L^?1 for DMNPS and DMNPH, respectively. Quantification was performed using the emission wavelength range from 360 to 600 nm with an optimum calibration sample number of 25 and prediction sample number of 7. The technique was proved to be beneficial.     

A Novel Pyrene Fluorescent Sensor Based on the π–π Interaction Between Pyrene and Graphene of Graphene–Cadmium Telluride Quantum Dot Nanocomposites

In this article, water-soluble graphene–cadmium telluride quantum dot nanocomposites were fabricated through the synthesis of cadmium telluride quantum dots in the presence of graphene aqueous dispersion. It was found that pyrene could remarkably quench fluorescence of graphene–cadmium telluride quantum dot nanocomposites. On this basis, a novel method for the determination of pyrene was developed. Factors affecting the pyrene detection were investigated, and the optimum conditions were determined. Under the optimum conditions, a linear relationship could be established between the quenching of fluorescence intensity of graphene–cadmium telluride quantum dot nanocomposites and the pyrene concentration in the range of 6.00 × 10^?8–2.00 × 10^?6 mol L^?1 with a correlation coefficient of 0.9959. The detection limit was 4.02 × 10^?8 mol L^?1. Furthermore, the nanocomposites were applied to practical determination of pyrene in different water samples with satisfactory results.     

STUDIES ON COPPER-CONTAINING NAD GLYCOHYDROLASE FROM AGKISTRODON ACUTUS VENOM BY FLUORESCENCE AND CD SPECTROSCOPY

ABSTRACT

The properties of NAD Glycohydrolase (NADase), purified from Agkistrodon acutus venom, have been studied by fluorescence and CD spectroscopy. The fluorescence intensities of NADase decrease by about 1% or 3% when the concentrations of I^? ion are 0.1 mol/L or 0.2 mol/L in the NADase solutions, respectively. However, the fluorescence intensities of the NADase are quenched by about 25% and 48%, respectively, with further addition of 1 mmol/L EDTA into solutions. CD spectra also suggested that EDTA could remove Cu²⁺ ion from NADase molecule and the conformation of NADase changed much. So Cu²⁺ ion is very important to maintain the geometrical structure of NADase.     

Voltammetric behaviors of an emerging pollutant benzotriazole on multiwall carbon nanotubes (MWNTs)—Nafion modified electrode in various pH mediums

The electrochemical behaviors of an emerging pollutant, benzotriazole (BTA), at multiwall carbon nanotubes and Nafion modified glassy carbon electrode (MWNTs-Nafion/GCE) were investigated systematically. The electrochemical reduction of BTA was significantly improved by MWNTs-Nafion compared to bare GCE, ascribed to the excellent adsorption capacity and electrocatalytic activity of MWNTs. BTA presented well-defined reduction peaks only at pH <3.0, suggesting the involvement of lots of protons in the reduction process. Peak potential shifted negatively and peak current decreased significantly with pH increase. BTA showed various UV–Vis absorption spectra in acidic and alkaline mediums. Cathodic peak current increased linearly with square root of sweep rate as well as with the concentration of BTA from 3.0?×?10^?6 to 1.6?×?10^?4 mol L^?1. This suggests a diffusion-controlled and irreversible electrode process. Diffusion coefficient of BTA on MWNTs-Nafion/GCE was obtained as 2.67?×?10^?2 cm² s^?1 with four orders of magnitude larger than that on GCE. MWNTs-Nafion/GCE showed a good selectivity between BTA and O₂ but poor selectivity between BTA and tolyltriazole.     

Simultaneous Determination of Ritodrine and Isoxsuprine Using Coupling Technique of Synchronous Fluorimetry and H-Point Standard Addition Method

Simultaneous determination of two structurally related ß₂ adrenergic receptor agonists namely, Ritodrine HCl (RTH) and Isoxsuprine HCl (ISP) was performed using coupling technique of synchronous fluorimetry and H-point standard addition method. Under optimum conditions, linear determination ranges were 1.48 – 14.80?×?10^?6 mol L^?1 and 1.54 – 15.44?×?10^?6 mol L^?1 for ISP and RTH respectively. RTH and ISP could be determined simultaneously without interference from each other when their concentration ratio varies from 5:1 to 1:5 in the mixed sample. The proposed method was applied to the determination of RTH and ISP in synthetic mixture of pharmaceutical samples, the accuracy and precision of the results were satisfactory.     

The B 2Σ+–X 2Σ+ Transition of 12C17O+: The 2‐υ″ Progression

Abstract

Three new bands of the B ²Σ⁺–X ²Σ⁺ system of ¹²C¹⁷O⁺ have been investigated using conventional spectroscopic techniques. The spectra were observed in a graphite hollow‐cathode lamp by discharging molecular oxygen (enriched in about 45% of the ¹⁷O₂ isotope) under 1.0 Torr pressure. The rotational analysis of the 2–4, 2–5, and 2–6 bands was performed with the effective Hamiltonian of Brown (Brown et al., J. Mol. Spectrosc. 1979; 74: 294–318). Molecular constants were derived from a merge calculation, including both the current wavenumbers and the spectroscopic data published by the authors previously. The principal equilibrium constants for the ground state of ¹²C¹⁷O⁺ are ω_e=2185.9658(84), ω_e x _e = 14.7674(11), B _e=1.927001(38), α_e=1.8236(22)×10^?2, γ_e=?0.331(28)×10^?4, D _e=6.041(12)×10^?6, β_e=0.100(31)×10^?7 cm^?1, and the equilibrium constants for the excited state are σ_e=45876.499(15), ω_e=1712.201(12), ω_e x _e=27.3528(39), B _e=1.754109(35), α_e=2.8706(57)×10^?2, γ_e = ?1.15(19)×10^?4, D _e=7.491(20)×10^?6, β_e=2.13(12)×10^?7, γ_e = 2.0953(97)×10^?2, and α_γe=?9.46(59)×10^?4 cm^?1, respectively. Rydberg–Klein–Rees potential energy curves were constructed for the B ²Σ⁺ and X ²Σ⁺ states of this molecule, and Franck–Condon factors were calculated for the vibrational bands of the B–X system.     

Preconcentration and Separation of Gold(III) from Ore Samples by Solid-Phase Extraction Prior to Its Catalytic Fluorescent Determination

ABSTRACT

A new catalytic kinetic fluorescent quenching method for the determination of trace gold(III) was investigated. The method was based on the catalytic effect of gold on oxidation of 3-(3′-methylphenyl)-5- (2′-arsenoxylphenylazo) rhodanine by hydrogen peroxide in potassium hydrogen phthalate–hydrochloric acid (pH = 3.4). Under the optimum conditions, the great decrease of fluorescence intensity has a linear relationship against the concentration of gold in the range of 0 to 12.0 µg·L^?1 with a detection limit of 6.0 × 10^?10g·L^?1. The coexistent metal ions can be separated, and gold can be enriched by TBP resin of solid-phase extraction, which greatly improves the selectivity and sensitivity of the system. The method can be used to determine trace amounts of gold in ore samples successfully with satisfactory results.     

A New Fluorescent “Turn-Off” Coumarin-Based Chemosensor: Synthesis,Structure and Cu-Selective Fluorescent Sensing in Water Samples

We report the synthesis and characterization two coumarin-based fluorescence probes, N′-{[7-(diethylamino)-2-oxo-2H-chromen-3-yl]carbonyl}pyridine-3-carbohydrazide (3) and N′-benzoyl-7-(diethylamino)-2-oxo-2H-chromene-3-carbohydrazide (4), proposed as a novel fluorescent chemosensor. The two probes designed showed an instant turn-off fluorescence response to Cu²⁺ over other metal ions in ethanol-water mixture based on intramolecular charge transfer (ICT). It was found that pyridine-analogue coumarin is highly selective and sensitive sensor for Cu²⁺. The 3 sensor coordinates Cu²⁺ in 1:1 stoichiometry with a binding constant, K_a = 5.22 M^?1 and the detection limit was calculated 1.97 × 10^?9 M.