Silver nanostructure arrays abundant in sub-5 nm gaps as highly Raman-enhancing substrates

Two types of highly Raman-enhancing arrays substrates were fabricated using anodic aluminum oxide (AAO) templates by controlling the AAO template temperature and evaporated silver thickness during e-beam evaporating: complex patterned Ag nanoparticle arrays abundant in sub-5 nm gaps (type I); hexagonal Ag nanopore arrays (type II). The surface enhanced Raman scattering (SERS) enhancement factors (EF) of both substrates are estimated experimentally to exceed 10⁵, especially that of type I reaches 10⁷ due to the existence of numerous sub-5 nm gaps. The simulation using finite-difference time-domain (FDTD) method confirmed that gap effect has significantly improved the substrates’ SERS activity.     

A comparative study of surface‐enhanced Raman scattering from silver‐coated anodic aluminum oxide and porous silicon

Three types of Ag‐coated arrays from porous anodic aluminum oxide (AAO) were prepared and studied as substrates for surface‐enhanced Raman scattering (SERS). They were compared with Ag‐coated porous silicon (PSi) samples. AAO‐based substrates were prepared by the vapor deposition of silver directly onto the surface of porous AAO with different morphologies of the pores, whereas SERS‐active island films on the PSi were prepared by immersion plating. The resulting metallic nanostructures were characterized by UV‐vis absorption spectroscopy and scanning electron microscopy (SEM). Thermal evaporation leads to the formation of granular arrays of Ag nanoparticles on the surface of AAO. SERS activity of the substrates was tested using water‐soluble cationic Zn(II)‐tetrakis (4‐N‐methylpyridyl) porphyrin (ZnTMPyP4) as a probe molecule. The results indicate that all AAO‐based substrates studied here exhibit some degree of SERS activity. Noteworthy, for excitation at 532 nm, signals from AAO‐based substrates were comparable with those from the PSi‐based ones, whereas for 441.6 nm excitation they were about twice higher. The strongest SERS‐enhancement at 441.6 nm excitationwas provided by the AAO substrates with silver deposited on the monolith (originally nonporous) side of AAO. Preferential SERS‐enhancement of the bands ascribed to the vibrations of the N‐methylpyridinium group of ZnTMPyP4 when going to blue excitation was found. Copyright © 2010 John Wiley & Sons, Ltd.     

银纳米颗粒阵列的表面增强拉曼散射效应研究

利用具有高密度拉曼热点的金属纳米结构作为表面增强拉曼散射(SERS)基底,可以显著增强吸附分子的拉曼信号.本文通过阳极氧化铝模板辅助电化学法沉积制备了高密度银(Ag)纳米颗粒阵列;利用扫描电子显微镜和反射谱表征了样品的结构形貌和表面等离激元特性;用1, 4-苯二硫醇(1, 4-BDT)为拉曼探针分子,研究了Ag纳米颗粒阵列的SERS效应.通过优化沉积时间,制备出高SERS探测灵敏度的Ag纳米颗粒阵列,检测极限可达10~(-13)mol/L;时域有限差分法模拟结果证实了纳米颗粒间存在强的等离激元耦合作用,且发现纳米颗粒底端的局域场增强更大.研究结果表明Ag纳米颗粒阵列可作为高效的SERS基底.     

Nanoflower-like Ag/AAO SERS platform with quasi-photonic crystal nanostructure for efficient detection of goat serum

An effective SERS-based detection method has been developed to quantitatively diagnose the goat serum which overcomes the problem of diffusion limitation in traditional heterogeneous immunoassay. In this work, the ultra-sensitive silver/anodic aluminum oxide (Ag/AAO) SERS platform was explored via magnetron sputtering which can precisely control the sample morphology and intergap distances. Results indicated that the localized surface plasmon resonance (LSPR) effect was sharply strengthened as the sub-10 nm nanogaps generated and the enhancement factor (EF) for crystal violet (CV) was calculated to be 3.677 × 10⁷. This novel Ag/AAO substrate with substantial “hot spots” exhibited high SERS sensitivity which could obtain extremely low limits of detection (LOD) of 10⁻¹² M for CV. Importantly, this SERS platform was employed to detect goat serum and reached a LOD at 1 ng/μl. As a nondestructive detection technique, our SERS-based methodology required small sample quantity which expected to achieve more biomolecular detection.     

Simple fabrication of hexagonally well-ordered AAO template on silicon substrate in two dimensions

In this study, thin anodic aluminum oxide (AAO) templates both on silicon substrates (AAO template/SiO₂/Si) and Ti-coated silicon substrates (AAO template/Ti/SiO₂/Si) were developed for design of magnetic, electronic and optoelectronic devices, chemical sensors and chip-scale lithium-ion rechargeable microbatteries. Two types of AAO template were prepared by using a two-step anodization procedure. The templates were characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy. The obtained thin AAO templates were approximately 50 nm in diameter and 700 nm in length with 80-nm interpore distances in a relatively large area of 6 cm². A barrier layer of the AAO templates was removed by a cathodic polarization method in KCl solution for several seconds. The current–time transient during removing the alumina barrier layer of the thin AAO template and the mechanism of electrochemical dissolution of the barrier layer are given in detail.     

Large‐area Ag nanorod array substrates for SERS: AAO template‐assisted fabrication,functionalization, and application in detection PCBs

Highly ordered arrays of thiolated β‐cyclodextrin (HS‐β‐CD) functionalized Ag‐nanorods (Ag‐NRs) with plasmonic antennae enhancement of electrical field have been achieved for encapsulation and rapid detection of polychlorinated biphenyls (PCBs). The large‐area ordered arrays of rigid Ag‐NRs supported on copper base were fabricated via porous anodic aluminum oxide (AAO) template‐assisted electrochemical deposition. The inter‐nanorod gaps between the neighboring Ag‐NRs were tuned to sub‐10 nm by thinning the pore‐wall thickness of the AAO template using diluted H₃PO₄. The nearly perfect large‐area ordered arrays of Ag‐NRs supported on copper base render these systems excellent in surface‐enhanced Raman scattering (SERS) performance with uniform electric field enhancement, as testified by the SERS spectra and Raman mappings of rhodamine 6 G. Furthermore, the Ag‐NRs were functionalized with HS‐β‐CD molecules so as to capture the apolar PCB molecules in the hydrophobic cavity of the CD. Compared to the ordinary undecorated SERS substrates, the HS‐β‐CD modified Ag‐NR arrays exhibit better capture ability and higher sensitivity in rapid detection of PCBs. Copyright © 2012 John Wiley & Sons, Ltd.     

A three‐dimensional surface‐enhanced Raman scattering substrate: Au nanoparticle supramolecular self‐assembly in anodic aluminum oxide template

A three‐dimensional surface‐enhanced Raman scattering (SERS) substrate via the self‐assembly of properly sized Au nanoparticles in anodic aluminum oxide templates was designed and prepared. Au nanoparticles first underwent hydrophobic surface modification. Then, the hydrophobic Au nanoparticles self‐assembled, aggregated and formed many hot spots in the anodic aluminum oxide templates through a supramolecular interaction. We chose thiophenol as a probe molecule to evaluate the SERS enhancement ability of this three‐dimensional substrate. The enhancement factor was calculated to be 4.6 × 10⁶ under the radiation of a 785‐nm laser. By further comparing SERS signals from different points on the same substrate, we confirmed that this substrate possessed good reproducibility and could be applied for SERS detection. Copyright © 2011 John Wiley & Sons, Ltd.     

Theoretical elucidation of the origin of surface‐enhanced Raman spectra of PCB52 adsorbed on silver substrates

To better understand experimentally observed surface‐enhanced Raman Scattering (SERS) of polychlorinated biphenyls (PCBs) adsorbed on nanoscaled silver substrates, a systematic theoretical study was performed by carrying out density functional theory and time‐dependent density functional theory calculations. 2,2′,5,5′‐tetrachlorobiphenyl (PCB52) was chosen as a model molecule of PCBs, and Ag_n (n = 2, 4, 6, and 10) clusters were used to mimic active sites of substrates. Calculated normal Raman spectra of PCB52–Ag_n (n = 2, 4, 6, and 10) complexes are analogical in profile to that of isolated PCB52 with only slightly enhanced intensity. In contrast, the corresponding SERS spectra calculated at adopted incident light are strongly enhanced, and the calculated enhancement factors are 10⁴ ~ 10⁵. Thus, the experimentally observed SERS phenomenon of PCBs supported on Ag substrates should correspond to the SERS spectra rather than the normal Raman spectra. The dominant enhancement in Raman intensities origins from the charge transfer resonance enhancement between the molecule and clusters. Copyright © 2014 John Wiley & Sons, Ltd.     

以PAA为模板制备SERS基底及对三聚氰胺的检测

采用热蒸镀的方法直接在多孔氧化铝(porous anodic alumina,PAA)模板上蒸镀几微米的银膜,然后在HCl溶液中溶解掉模板,得到表面具有纳米尺度规则结构的银膜作为表面增强拉曼散射(surface-en-hanced Raman spectra,SERS)基底,并在该基底上测量了吡啶溶液(0.01 mol.L-1)的增强拉曼光谱,发现平均增强因子大于105。与直接在载玻片上蒸镀的银膜相比,具有纳米尺度规则结构银膜的增强效果提高了30倍。改变激发光功率测量吡啶的拉曼光谱,和普通拉曼散射一样,增强拉曼光谱的峰值强度随激发光强度线性变化,并在该基底上测量了三聚氰胺的拉曼光谱,发现在1 mW的激发功率下对于三聚氰胺的检出限为2.5 mg.L-1。     

Fabrication of periodical Ag–Au compound nanostructure films with controllable Ag nanoparticle aggregate patterns: a study on surface‐enhanced Raman scattering

The Ag–Au compound nanostructure films with controllable patterns of Ag nanoparticle (NP) aggregates were fabricated. A strategy of two‐step synthesis was employed toward the target products. Firstly, the precursor Au NP (17 nm) films were synthesized as templates. Secondly, the Ag NPs (45 nm) were deposited on the precursor films. Three types of Ag NP aggregates were obtained including discrete Ag NPs (discrete type), necklace‐like Ag NP aggregates (necklace type), and huddle‐like Ag NP aggregates (huddle type). The surface‐enhanced Raman scattering (SERS) property was studied on these nanostructures by using the probing molecule of rhodamine 6G under the excitation laser of 514.5 nm. Interestingly, the different types of samples showed different enhancement abilities. A statistical method was employed to assess the enhancement. The relative enhancement factor for each Ag NP was estimated quantitatively under the ratio of 1 : 25 : 18 for the discrete‐type, necklace‐type, and huddle‐type samples at the given concentration of 10⁻⁸ mol/l. This research shows that the enhancement ability of each Ag NP is dependent on the aggregate morphology. Moreover, the different enhancement abilities displayed different limit detection concentrations up to 10⁻⁸, 10⁻¹¹, and 10⁻⁹ mol/l, separately. The understanding of the relationship between the defined nanostructures and the SERS enhancement is very meaningful for the design of new SERS substrates with better performance. Copyright © 2015 John Wiley & Sons, Ltd.     

Optimizing surface-enhanced Raman scattering by template guided assembling of closely spaced silver nanocluster arrays

We present an easy approach to synthesize closely spaced regular arrays of silver nanoclusters, which are self-assembled by depositing gas-phase synthesized metal nanoclusters onto pre-patterned triblock copolymer templates. The array has a high particle density of about 2 ×10³ particles per μm², and an average interparticle space of about 20 nm. The surface plasmon resonance wavelength of the array is tuned due to the interparticle plasmon coupling. High SERS sensitivity for less than one layer trans-1,2-bi-(4-pyridyl) ethylene (BPE) molecule detection, with an enhancement factor of 2.6 ×10⁶, has been demonstrated for a substrate with this array. The enhanced Raman signal was found to be 5 times higher than that measured from the substrate with randomly distributed silver nanoparticles.     

Diamine-linked array of metal (Au,Ag) nanoparticles on glass substrates for reliable surface-enhanced Raman scattering (SERS) measurements

Metal (Au, Ag) nanoparticles (M NPs) (ca. 30–40 nm) prepared by citrate reduction method were arrayed on amine-terminated glass substrates using diamine linkers with different chain lengths. 1,4-diaminobutane (C-4 diamine) produced the uniform and densely-packed array of M NPs on glass substrates at appropriate concentration ranges, whereas diamine linkers with longer chain lengths (C-8 and C-12 diamines) produced more heterogeneous and aggregated array of M NPs. When compared to Ag NPs, Au NPs demonstrated more controllable and higher packing density due to their mono-dispersed size and higher affinity to diamine linkers. Uniformly arrayed M NPs (Au, Ag) on glass substrates exhibited high enhancement factors in SERS measurements of o-chlorothiophenol probes. Au NPs arrayed substrates exhibited an approximate power-law linearity of Raman intensity with probe concentrations (from 10⁻⁷ M to 10⁻⁴ M), demonstrating more reliable SERS substrates than Ag arrayed substrates with higher SERS activity.     

Tailor-made metal nanoparticles as SERS substrates

In this contribution we summarize recent experiments with the objective to generate optimized substrates for surface-enhanced Raman spectroscopy (SERS). For this purpose, the well-established laser-assisted growth technique has been applied, which relies on a precise control of the growth kinetics of supported metal nanoparticles. With this method reproducible and stable SERS substrates with tailor-made optical properties possing best field enhancements were produced for specific excitation wavelengths and detection ranges. Optimization of the SERS substrates has been achieved by stabilizing the localized surface plasmon polariton resonance (SPR) of gold nanoparticles in the vicinity of the laser wavelength of λ=647 nm and λ=785 nm used for SERS excitation. After nanoparticle preparation, SERS spectra of pyrene were obtained using naturally grown nanoparticles and nanoparticles prepared by laser-assisted growth. The most important result is that the optimized substrates prepared by laser-assisted growth exhibit a significantly higher signal-to-noise ratio as compared to naturally grown nanoparticles. They are even better than substrates whose SPR has been tuned to the excitation wavelength by an elevated temperature during preparation. Another important observation is that all SERS spectra exhibit excellent reproducibility and the substrates do not show degradation during the measurements. Finally, the SERS enhancement factors due to the optimized substrates have been estimated and are on the order of 10⁵ to 10⁶.     

Silver nanorods used to promote SERS as a quantitative analytical tool

We have fabricated silver nanorod arrays by electrodepositing the nanorods evenly in the shallow pores of porous anodic aluminum oxide (AAO) templates. The diameter and length were 28 and 44 nm, respectively. The maxima of the transverse and longitudinal modes of the surface plasmon were near 417 and 511 nm, respectively. A good surface‐enhanced Raman scattering (SERS) spectrum was observed by excitation with the 514.5‐nm laser line. The SERS intensity increased almost linearly upon malachite green isothiocyanate adsorption on the tips of the silver nanorods as the concentration of the mother solutions increased. Our results show that silver nanorods fabricated on AAO templates could be used as an SERS substrate for quantitative analyses. Copyright © 2009 John Wiley & Sons, Ltd.     

A hybrid substrate for surface‐enhanced Raman scattering spectroscopy: coupling metal nanoparticles to strong localised fields on a micro‐structured surface

Electromagnetic coupling between localised plasmons on metal nanoparticles and the strong localised fields on a micro‐structured surface is demonstrated as a means to increase the enhancement factor in surface‐enhanced Raman scattering (SERS) spectroscopy. Au nanoparticles of diameter 20 nm were deposited on a micro‐structured Au surface consisting of a periodic array of square‐based pyramidal pits (Klarite). The spectra of 4‐aminothiophenol (4‐ATP) were compared before and after deposition of Au nanoparticles on the micro‐structured surface. The addition of Au nanoparticles is shown to provide significantly higher signal intensities, with improvements of the order of ∼10³ per molecule compared with spectra obtained from the micro‐structured substrate alone. This hybrid approach offers promise for combining nanoparticles with micro‐ and nano‐structured surfaces in order to design SERS substrates with higher sensitivities. Copyright © 2011 John Wiley & Sons, Ltd.     

Sensitive and Reliable SERS Substrates Based on Hierarchical Nanoparticle Arrays Fabricated by Confined Spheroidization

Substrates with complex and hierarchical nanostructure are widely investigated in surface‐enhanced Raman scattering (SERS), but it remains challenging to improve the structural uniformity and stability. Herein, a novel method is proposed: confined spheroidization. Unique configurations of hierarchical metallic nanoparticle arrays (HMNA) are successfully fabricated by confined spheroidizing on anodic aluminum oxide templates. By utilizing the confined effect of the holes, a series of large particles inside the hole and small particles arranged on the hole wall are obtained after thermal annealing. The size and distribution of nanoparticles strongly depend on the hole size, the thickness of the hole wall, and the deposition thickness of metal layer. COMSOL simulations demonstrate good SERS activity of the HMNA, with a low detection limit of ≈10^?8 m for crystal violet (CV) and the enhancement factor of ≈ 4.97 × 10⁷ at the 1160 cm^?1 mode of CV. The relative standard deviation of 6.23% from 59 random spots and a 9.24% signal variation among ten substrates are achieved, showing good SERS signal reproducibility of the HMNA. This simple and low‐cost technique makes it possible to prepare 3D hierarchical ordered micro–nanostructures by one‐step, showing prospect applications in SERS‐based detection and plasmonic materials.     

Self-assembled Ag nanoparticles for surface enhanced Raman scattering

Uniform and reproducible substrates for surface enhanced Raman scattering (SERS) are fabricated by self-assembly of Ag nanoparticles (NPs) on 3-aminopropyltrimethoxysilane (APTES) modified glass. Experimental results indicate that the Ag NPs with a narrow size distribution were assembled as a sub-monolayer which exhibits an excellent SERSactivity. The SERS enhancement factor is estimated to be 7.5 × 10⁶ and the detection limit for crystal violet (CV) solution is about ～10^?11 M. The uniformity and reproducibility of the SERS signals are tested by point-to-point and batch-to-batch measurements. It is confirmed that the self-assembled Ag NPs substrates has a high SERS reproducibility and a low standard deviation with respect to the Ag NPs on non-functionalized glass substrates. The self-assembled Ag NPs substrates can be widely used for the application of chemical and biochemical sensing.     

SERS active Ag nanoparticles in mesoporous silicon: detection of organic molecules and peptide–antibody assays

Ag nanoparticles synthesized on porous silicon samples were studied and applied as substrates for surface‐enhanced Raman scattering (SERS). The metallic nanostructures prepared by immersion plating were characterized by UV–Vis reflectance spectroscopy and scanning electron microscopy. SERS activity of the substrates was tested using Cyanine dye 1,3,3,1′,3′,3′‐esamethyl‐5,5′‐dimethoxyindodicarbocyanine iodide (Cy5‐OCH₃) as a probe molecule. The Raman spectra obtained for different excitation wavelengths indicate amplifications ascribed to plasmonic resonances with an enhancement factor up to 10⁷. CGIYRLRS peptides were chemisorbed on the Ag nanoparticles with the plasmonic resonance tuned at the excitation energy. Such oligopeptides were used as baits for a specific polyclonal antibody. The overall Raman enhancement allowed to evidence a good selectivity to the target analyte as required by most of the SERS applications on biological assays. Copyright © 2011 John Wiley & Sons, Ltd.     

银纳米阵列直径对SERS增强效果的影响

采用电化学沉积法分别在不同孔径的阳极氧化铝(AAO)模板上沉积一系列直径不同,排列规则的银纳米阵列。以对氨基苯甲酸(PABA)和三聚氰胺两种分子分别作为探针分子, 研究了银纳米阵列的直径大小对其表面增强拉曼散射(SERS)效果的影响。结果表明, 在波长为514.5 nm的激光激发下, 探针分子的SERS信号强度随银纳米阵列直径的改变而明显变化, 并在银纳米阵列直径约为53 nm时, SERS强度达到最大。利用电磁增强机制对此实验结果进行了分析和解释。     

SERS enhancement of gold nanospheres of defined size

Monodisperse, citrate‐stabilized gold nanoparticles of sizes ranging from 15 to 40 nm were synthesized and characterized by small angle X‐ray scattering and UV‐vis experiments. Identical surface properties of nanoparticles of different sizes to avoid variation in the chemical surface‐enhanced Raman scattering (SERS) enhancement, as well as selection of experimental conditions so that no aggregation took place, enabled the investigation of enhancement of individual nanospheres. Enhancement factors (EFs) for SERS were determined using the dye crystal violet (CV). EFs for individual gold nanospheres ranged from 10² to 10³, in agreement with theoretical predictions. An increase of the EFs of individual spheres with size can be correlated to changes in the extinction spectra of nanoparticle solutions. This confirms that the increase in enhancement with increasing size results from an increase in electromagnetic enhancement. Beyond this dependence of EFs of isolated gold spheres on their size, EFs were shown to vary with analyte concentration as a result of analyte‐induced aggregation. This has implications for the application of nanoparticle solutions as SERS substrates in quantitative analytical tasks. Copyright © 2011 John Wiley & Sons, Ltd.