Comparative Study on Three Different Systems of Chemiluminescence Flow‐Injection Determination of Leucogen

Abstract

The effects of three systems on the chemiluminescence (CL) intensity have been studied in this paper, such as leucogen–potassium permanganate–rhodamine B, leucogen–cerium (IV)–rhodamine B, and leucogen–luminol–hydrogen peroxide (called system 1, system 2, and system 3, respectively). The mechanism of these reactions is also discussed. Surfactant (CTMAB) has a remarkably sensitive effect on these systems mentioned above. Therefore, three new flow injection chemiluminescence methods for the determination of leucogen have been established. For system 1, the linear range is 8.0×10^?8 to 4.0×10^?5 g mL^?1, with limits of detection 2×10^?8 g mL^?1; the relative standard deviation is 2.5% (n=11, Cs=4.0×10^?6 g mL^?1). For system 2, the linear range is 1.0×10^?8 to 5.0×10^?6 g mL^?1, with limits of detection 3×10^?9 g mL^?1; the relative standard deviation is 5.1% (n=11, Cs=1.0×10^?6 g mL^?1). For system 3, the linear range is 4.0×10^?8 to 2.0×10^?6 g mL^?1, with limits of detection 1×10^?8 g mL^?1; the relative standard deviation is 1.3% (n=11, Cs=1.0×10^?7 g mL^?1). Compared with the three methods above, system 3 is confirmed as the best method. This method has been applied to the determination of leucogen with satisfactory results.     

A Multi‐purpose Flow System Based on Multi‐commutation

A multi‐purpose flow system designed with solenoid valves and micropumps is proposed. The independent control of each active device was exploited to implement dilutions, calibration with a single solution, standard additions, titrations and strategies to increase sample residence time without changing the manifold hardware. Sample dispersion coefficients between 1 and 7800 were achieved by changing the sample volume and exploiting zone sampling, with coefficient of variation estimated as 6.5% for the highest dilution. Calibration curves obtained from a single standard showed slopes in agreement with those obtained by conventional batch dilutions with variations of lower than 2% between days. The possibility of implementing the standard addition method or the stopped‐flow approach at different points of the manifold was demonstrated for creatinine determination in urine by the Jaffe reaction. Analytical curves for different sample residence times can be obtained for detecting matrix effects or for the analysis of colored samples. Titrations by the continuous variation method or binary search, as well as other possible applications, are discussed.     

Spectrophotometric Determination of Ammonia in Estuarine Waters by Hybrid Reagent‐Injection Gas‐Diffusion Flow Analysis

Abstract

A flow‐injection gas‐diffusion technique is described for the online determination of ammonia in estuarine waters covering a salinity range of S=0 to 36. The flow analysis system, which is a hybrid of reagent injection and conventional sample‐injection flow systems, avoids the need for a rotary injection valve. Whereas gas‐diffusion techniques have been widely applied in conventional sample‐injection flow analysis, reagent‐injection flow analysis involving gas diffusion has been little used because it is susceptible to interference from dissolved gaseous species such as carbon dioxide coexisting with ammonia in the sample. This source of interference has been overcome by online adjustment of sample to pH 8.4 prior to the injection of the base that initiates gas diffusion of ammonia. The pore sizes of hydrophobic membranes used in gas diffusion were characterized by a bubble‐point test prior to use in the flow analysis system. These showed wide variation in pore size, and grading and careful selection was necessary in order to obtain reliable gas diffusion measurements of ammonia. The proposed flow‐injection system can be operated in a continuous flow mode, at a sample throughput of 135 measurements hr^?1 with a typical limit of detection (LOD) of 9 µg N L^?1, or in stopped‐flow mode at 60 measurements hr^?1 with a LOD of 3 µg N L^?1. The technique was validated using water samples containing a wide range of dissolved carbon dioxide concentrations, salinity, and pH. Excellent agreement (r=0.999) was observed between results obtained using the reagent‐injection system and an approved reference method.     

Enhancement of Europium Luminescence in Tetracycline–Europium Complexes in the Presence of Urea Hydrogen Peroxide

An increase in the europium emission band was observed, for the first time, with addition of urea hydrogen peroxide to the tetracycline–europium (Tc–Eu)solution. We have observed that the wavelength, the band width and the area of ⁵D₀→⁷F₂ europium transition change with the urea hydrogen peroxide concentration. We claim that the tetracycline–europium complexes can be used as probes of urea hydrogen peroxide concentration.     

Quantum‐Chemical Investigation of Hydrogen Bonds in Porphin

Using the DFT Becke–Lee–Yang–Parr exchangecorrelation threeparametric functional (B3LYP), we have calculated the geometry, the electron density distribution, and the vibration frequencies for pyrrole, porphin, and their 13 analogs with a regularly varying structure. It is shown that the determining role in the change in the frequencies of stretching and outofplane deformation vibrations of porphin compared to pyrrole is played by intramolecular hydrogen bonds at the porphyrin macroring center. We have separately considered and compared with the data for porphin complexes of pyrrole with different intermolecular hydrogen bonds: with an aromatic ring (NH··· cluster formed by the pyrrole selfaggregation in the liquid state) and an unshared electron pair (NH···OH₂ and NH···NC₄H₄ clusters). The degree of participation of the NH group in the hydrogen bonds increases in the series NH··· cluster, porphin, NH···OH₂ and NH···NC₄H₄ clusters.     

Heterogeneous Chemiluminescence of Crystal Phosphors on X‐Ray or UV Irradiation

Using a highvacuum assembly with molecular beams and setups with an implemented atom probe, we investigated atomic and molecular adsorption luminescence of the oxides CaOBi and MgO in O and O₂ beams and also radicalrecombination luminescence excited by H and O atoms in ZnS and in ZnS,CdS samples activated with silver, copper, and the rareearth element Tm. It is established that exposure to UV light and xray radiation of the CaOBi, MgO, and ZnSTm samples, where the mechanism of direct excitation of heterogeneous chemiluminescence (HCL) is realized, does not influence the characteristics of the heterogeneous chemiluminescence, whereas similar exposure of the ZnS,CdSCu,Al and ZnS,CdSAg samples and of selfactivated ZnS, in which the excitation of heterogeneous chemiluminescence is due to the ionization of the lattice, leads to an increase in the intensity of heterogeneous chemiluminescence up to five orders of magnitude. The mechanisms of the phenomenon are considered.     

Explanation for Hydrogen Bonds of Chitin‐Alcohols from Lewis Acid‐Base Theories

The inverse gas chromatography (IGC) method was used to characterize the hydrogen bond energies of chitin‐methanol and chitin‐ethanol. Surface Lewis acid‐base properties of the chitin were determined at the same time. Six solvents, trichloromethane, acetone, ether, tetrahydrofuran, methanol, and ethanol were used as polar probes for the IGC measuration. The hydrogen bond energies of chitin‐methanol and chitin‐ethanol were 23.3 and 21.3 kJ/mol, respectively. Because the linear relation of the plot of ?ΔH_a ^s/AN* versus DN/AN* (DN and AN* are the Gutmann's donor and modified acceptor numbers of solvents) for the six probes was perfect, it can be concluded that the hydrogen bonds of chitin‐alcohols belong to Lewis acid‐base interactions. The hydrogen bonds were moderate hydrogen bonds.     

Analysis of the Electrohydrodynamic Flow in a Symmetric System of Electrodes by the Method of Dynamic Current–Voltage Characteristics

We have solved the problem of injection-type through electrohydrodynamic (EHD) flow in a closed channel. We have considered a model of a liquid with four types of ions. It is shown that a through EHD flow without internal vortices in the electrode gap is formed for the ratio 2 : 1 of the initial injection current from the electrodes in the channel. The structure of the flow in different parts of the channel and the integral characteristics of the flow have been analyzed. It is shown that for a quadratic function of injection at the electrodes, the current–voltage characteristic of the flow is also quadratic.     

Study on Phase‐Change Characteristics of PET‐PEG Copolymers

Polyethylene glycol (PEG) was selected as a phase‐change material (PCM) and the phase‐change fibers of its copolymers with polyethylene terephalate (PET), PET‐PEG, were successfully prepared by melt spinning. The PET‐PEG copolymers have solid‐solid phase change characteristics at 10–60°C without obvious liquid substance appearing, while PET/PEG blends will lose their phase‐change characteristics since the PEG of the blends may melt and leak under high temperature. By controlling the molecular weight and relavent proportion of PEG added, the phase‐change temperature range and the enthalpy can be adjusted.     

Rheological Study of Some Epiclon‐Based Polyimides

The rheological properties of new partially aliphatic polyimides in N,N‐dimethylformamide were investigated at different concentrations and temperatures comparatively to their corresponding poly(amic acid)s. The rheological functions,i.e., dynamic viscosity, shear rate, elastic shear modulus, and viscous shear modulus, and the parameters obtained from rheological properties such as apparent energy of activation and flow activation entropy reflect the influence of the diamine chemical structures used in the synthesis process.     

Intramolecular Hydrogen Bond in Steroid 5‐Hydroxy‐6‐Ketones and 5‐Hydroxy‐6‐Ketoximes of the Stigmastane Series

The intramolecular hydrogen bond in steroid 5hydroxy6ketones and 5hydroxy6ketoximes of the stigmastane series has been investigated by the method of IR spectroscopy. It is shown that 5hydroxy groups in cisA/Bsteroids are linked by the intramolecular hydrogen bond with polar substituents at C₃ and C₆. These hydrogen bonds are lacking in corresponding transA/Bsteroids. According to the IR spectra, intramolecular associates of polymer type are formed in 5hydroxy6hydroxyminosteroids.     

Mössbauer Study of Magnetic FeSb Dilute System

Hyperfine Interactions - Mössbauer study of semimetals is of great importance in understanding the origin of hyperfine interactions in these materials. A concentration dependence study in Fe x...     

Sequential Injection/Mid-Infrared Spectroscopic Analysis of an Acetone‐Butanol‐Ethanol Fermentation: Analyte Cross‐Correlation Effects

Mid‐infrared spectroscopy together with sequential injection analysis (SIA) and partial least squares (PLS) regression analysis was used to monitor acetone‐butanol‐ethanol (ABE) fermentations under different fermentation conditions. Five analytes were simultaneously predicted (acetone, acetate, butyrate, n‐butanol, and glucose). In order to compare the overall model prediction ability, a relative average of the root mean square error of prediction (RMSEP) across all five analytes was employed. To form a PLS model devoid of any cross‐correlations between analytes, a synthetic calibration data set was created by the SIA system. As a test of their robustness, PLS models from synthetic samples and those from real fermentation samples were compared and used to predict samples from the opposite data set and from independent “acid‐crash” fermentations. The PLS model developed from the synthetic samples proved to be far more robust and accurate and used fewer factors than PLS models from the real fermentations, which were found to contain analyte cross‐correlations. The use of synthetic data enabled more accurate selection of factors and showed the importance of investigating spectral regression coefficients plots to aid and confirm appropriate factor selection. In addition, an alternative method of factor selection was proposed, using a “similarity measure” between the regression coefficient plots of factors for certain analytes and their standard spectra. Predictions using this method of factor selection over the common “minimum from an error vs. factor” plot proved to be more accurate and used far fewer factors.     

Theoretical and Experimental Study of the Conformation and Vibrational Frequencies of N‐Acetyl‐L‐alanine and N‐Acetyl‐L‐alaninate

The vibrational frequencies of N‐acetyl‐L‐alanine (NAAL), its potassium salt (NAALK) and its free anionic form (NAAL^?) are calculated using density functional theory (B3LYP) combined with the 6‐311 + + G(d,p) basis set. The experimental Raman spectrum of solid NAALK and the scaling factors for calculated values are discussed as well. The three species are characterized by intramolecular NH…O hydrogen bonds leading to the formation of a five‐membered ring. As indicated by the intramolecular (N)H…O distances and by the ν(NH) frequencies, the strength of the intramolecular hydrogen bond is ordered as follows: NAAL^? < NAALK < NAAL^?. Owing to their difference in the coupling with other vibrational modes, the in‐plane and out‐of‐plane vibrations do not reflect the strength of the hydrogen bond.