遥感FTIR测定固体推进剂燃烧的红外光谱特性

应用高分辨率的Bruker EQUINOX55型遥感FTIR,对含有大量高氯酸铵和聚四氟乙烯的高红外活性的固体推进剂燃烧火焰的红外光谱特性进行了研究。设定遥感FTIR光谱仪的光谱分辨率为4 cm-1,连续实时地收集燃烧进行到0,9,18,27和36 s时火焰的红外发射光谱图。采用分子转振光谱测温法,实时测定了固体推进剂的燃烧温度,测得的温度分别为1 992.5,2 610.9,2 294.4,2 361.1和1 916.9 K,校正了仪器的响应函数,得到了固体推进剂燃烧火焰的绝对光谱能量分布图,以及在不同时刻燃烧产物HCl,HF,CO₂和CO的实时浓度。研究结果表明,遥感FTIR可以用于研究特种红外源的红外光谱特性,特别是用于军事上红外目标识辨和制导与反制导,以及研究和改进固体推进剂的配方,是一种很有潜力的技术。     

FTIR光谱遥测红外药剂的燃烧温度

本文利用遥感FTIR光谱，对红外药剂的燃烧特性进行了研究。在分辨率为4cm^-1时，收集4700－740cm^-1波段的光谱。从HF等燃烧产物发射的分子振转基带精细结构的谱线强度分布，可以对燃烧温度进行遥感测定，并给出了燃烧温度随时间的变化关系，实验结果表明燃烧表面附近温度梯度很大，存在着急剧的变化温度场，同时也说明，在不干扰火焰温度场的情况下，利用遥感FTIR光谱对剧烈的、非稳态快速燃烧的火焰温度进行连续实时的遥感测量，是一种快速、准确、灵敏度高的测温方法，显示了它在燃烧温度测量、产物浓度测试以及燃烧机理研究等方面的应用前景。     

The Influence of the Temperature of Blackbody for Calibrating FTIR System on the Instrument Response Function∗

The instrument response function of Fourier transform infrared spectrometer is a very important parameter in infrared emission Spectroscopy to obtain infrared spectral radiance distribution of the desired sample, the concentrations of the components of combustion products in the flame etc. This paper gives the effect of the temperature of the standard blackbody for calibrating Fourier transform infrared spectrometer on the instrument response function. The result illustrates that the values of the instrument response functions decrease as the blackbody temperature increased, and tends to a limit. The paper points out that the condition must be observed for using instrument response function correctly.

     

Study on Infrared Spectral Radiance by Remote Fourier Transform Infrared Spectroscopy

Abstract

Infrared emission spectra emitted by high luminosity infrared pyrotechnics have been observed remotely using the Fourier transform infrared spectroscopy. The primary purpose of the study is to determine infrared spectral radiance distribution, their time—resolved spectra and integrated emission energy. The spectra have been recorded between 4000 – 800cm^?1 region with spectral resolution of 4cm^?1. The study is very important for many applications.     

红外光谱遥测固体推进剂燃烧温度及有机化合物对其影响

本文用遥感FTIR光谱 ,测定了固体推进剂燃烧火焰在光谱范围为 4 5 0 0～ 70 0cm- 1 处的红外发射光谱 ,利用HCl分子转振基带 (3 4 6 μm)精细结构的P 分支光谱 ,准确测定了固体推进剂燃烧火焰温度 ,并对含有不同材料固体推进剂 ,如有机化合物对燃烧温度的影响 ,作了讨论。     

FTIR遥测固体推进剂燃烧温度

应用遥感FTIR对固体推进剂燃烧火焰的温度进行了研究。遥感FTIR光谱仪在光谱分辨率为4cm^-1时,连续收集燃烧火焰的发射光谱。分别利用分子基带转振光谱测温法,以及分子发射光谱最大强度谱线测温法,对燃烧温度进行了遥感实时测定。文中列出了两种方法测得的各时刻的火焰温度。结果表明。两种方法在测量快速、剧烈燃烧的火焰温度时,都是很可靠的方法,当火焰的燃烧比较稳定时,分子发射光谱最大强度谱线测温法更为简便、快速。     

CO2及其碳同位素比值高精度检测研究

改进了一种基于傅里叶变换红外光谱法测量CO₂气体的装置, 改进后的装置能够提高CO₂检测精度, 并能同时测量CO₂碳同位素比值. 研究了温度和压力对CO₂浓度值和CO₂碳同位素比值测量的影响规律. 利用该装置连续测量了标准CO₂气体和环境大气, 对标准CO₂气体测量得到的CO₂浓度值及其碳同位素比值进行温度和压力影响修正, 获得了较好的精度和准确度. 关键词： 光谱学 同位素比值 傅里叶变换红外光谱 二氧化碳     

利用辐射光谱法在线测量固体火箭推进剂燃烧温度

针对固体火箭发动机恶劣环境下的高温燃烧测量问题,提出了利用辐射光谱法来开展固体火箭推进剂燃烧温度在线测量的方法,采用200～1 100 nm光纤光谱仪测量了高压实验燃烧器下固体火箭推进剂燃烧火焰辐射光谱,总结了其光谱特性,并基于普朗克定律和光谱拟合方法获得了相应的推进剂燃烧温度,这对固体火箭推进剂燃烧诊断与燃烧机理研究具有重要的参考价值。     

差谱技术用于实时遥测化学蒸气微弱光谱

ＲＦＸ－４０干涉型被动式傅立叶变换红外光谱仪用于远距离遥感化学蒸气微弱红外光谱。本将着重讨论化学蒸气红外辐射的传输特性及差谱技术用于抑制大气辐射对微弱目标的影响，增强化学蒸气光谱的特征。     

基于分子转-振光谱精细结构的火焰温度遥测方法

燃烧火焰温度是固体推进剂等重要参数,本文研究了基于分子转-振光谱精细结构的火焰温度遥测方法.根据分子转-振光谱线的展宽机制,研究了分子谱线线型.结合朗伯-比耳吸收定律,去除谱线中心受大气低温气体吸收影响较大的数据点后,利用谱线两翼的数据点进行谱线线型拟合,利用分子转-振光谱精细结构温度遥测方法将经拟合修正后数据反演火焰...     

Retrieval algorithm of quantitative analysis of passive Fourier transform infrared （FTRD） remote sensing measurements of chemical gas cloud from measuring the transmissivity by passive remote Fourier transform infrared

Passive Fourier transform infrared （FTIR） remote sensing measurement of chemical gas cloud is a vital technology. It takes an important part in many fields for the detection of released gases. The principle of concentration measurement is based on the Beer-Lambert law. Unlike the active measurement, for the passive remote sensing, in most cases, the difference between the temperature of the gas cloud and the brightness temperature of the background is usually a few kelvins. The gas cloud emission is almost equal to the background emission, thereby the emission of the gas cloud cannot be ignored. The concentration retrieval algorithm is quite different from the active measurement. In this paper, the concentration retrieval algorithm for the passive FTIR remote measurement of gas cloud is presented in detail, which involves radiative transfer model, radiometric calibration, absorption coefficient calculation, et al. The background spectrum has a broad feature, which is a slowly varying function of frequency. In this paper, the background spectrum is fitted with a polynomial by using the Levenberg-Marquardt method which is a kind of nonlinear least squares fitting algorithm. No background spectra are required. Thus, this method allows mobile, real-time and fast measurements of gas clouds.     

Remote Measurement of Motorcycle Exhaust Using Fourier Transform Infrared System

Abstract

We have explored the basic theory and quantitative methods for the measurement of motorcycle exhaust using a Fourier transform infrared interferometer system. Remote sensing direct measurements were made and the species carbon monoxide, carbon dioxide, nonmethane paraffinic carbon(CH^x) and unburned additional harmful species in motorcycle exhaust were determined. Typical concentrations observed in absorption for carbon monoxide, carbon dioxide and nonmethane paraffinic carbon were about 1.11%, 1.91%, 0.54% respectively. Furthemore, this paper describes the remote sensing Fourier transform infrared spectrometer system. The system covers the infrared spectral region from 700 to 6000 cin^?1 at a maxim resolution of 0.06 cm^?1 for beamsplitter of gerrniuiirun coated zinc selenide and receiver telescope with zinc selriide leis. For air multipollutant monitoring the analytica1 methods have the potential and become important. The remote measurements usirig the Fourier transform inf raid spectroscopy could become niore practical.     

A spectroscopic database for water vapor adapted to spectral properties at high temperature, and moderate resolution

The prediction of infrared spectral radiance from high temperature media such as combustion gases requires spectroscopic data for triatomic molecules like water vapor and carbone dioxyde. At temperature above 2000 K, water vapor spectrum is composed of hundreds of thousands lines making practical computations uneasy. We have set up a spectroscopic database for water vapor, based on three existing lines compilations. This database is well suited to computation of remote sensing spectra where hot gases emission is seen through atmospheric paths. The database enables efficient computation of water vapor spectra between 600 and 6600 cm⁻¹ at moderate spectral resolution (5 cm⁻¹). It has been used to compute parameters of a statistical narrow band model which are used in practical applications.     

污染气体扫描成像红外被动遥测系统实时数据处理研究

使用红外被动遥测技术可实现污染气体的远程监控和预警. 该技术应用过程中, 获取背景辐射是进行定量解析的关键, 在已有的应用中, 多采用同条件测量法和上风口测量方法获取背景光谱和环境光谱, 但这些方法均需要提前或者同时测量无目标物的背景光谱, 难以在实际应用中满足快速响应的需求. 本文基于红外辐射传输模型分析, 通过研究在800–1200 cm^-1波段内的实测光谱中同时包含目标、背景和环境辐射的基本原理, 采用了一种不需要事先测量背景的目标特征的背景光谱实时提取算法, 通过将该方法应用于自主研制的污染气体扫描成像红外被动遥测系统, 以六氟化硫为示踪气体, 开展了遥测验证实验. 将获取的浓度数据与应用同条件测量法获取的数据进行了比较, 结果显示两者的相关系数平方值达到0.99, 表明该方法切实可行, 可有效提高系统的响应速度和适用范围. 关键词： 傅里叶变换红外光谱 被动遥测 实时光谱提取算法     

固体火箭发动机羽流辐射光谱测温方法研究

固体火箭发动机羽流具有高温、高速与强辐射特征,羽流温度是发动机工作状态与性能的重要表征参数。准确测量固体火箭发动机羽流温度对了解发动机内部燃烧情况以及发动机综合性能具有重要的参考价值。随着激光与光谱学的发展,激光光谱技术逐步应用于固体推进剂燃烧及发动机羽流温度测量。辐射光谱测温法通过测量火焰辐射光谱来实现温度的非接触在线测量,具有测温范围宽、响应快及可靠性高等优点,可应用于固体火箭发动机羽流温度测量。在此提出了基于火焰辐射光谱的固体火箭发动机羽流温度测量方法,采用350～1 000 nm波段光纤光谱仪搭建了发动机羽流火焰辐射光谱测量系统,利用标准辐射黑体炉开展光谱仪响应系数标定,获得响应系数随波长的变化曲线,并以此用作羽流辐射光谱数据修正。之后将该测量系统应用于标准Φ118固体火箭发动机地面试验,开展典型12%铝质量含量推进剂发动机羽流辐射光谱实验测量,选取不同时刻羽流辐射光谱分析了发动机羽流辐射光谱特征,并利用双色法灰性判断原理对羽流火焰灰体特性进行讨论,验证在675～745 nm波段发动机羽流火焰辐射可近似认为灰体,该波段辐射率随波长变化最大相对偏差为4.01%,相对均方差为1.53%。因此,基于普朗克辐射定律开展辐射光谱拟合参数获得不同时刻羽流温度与辐射率参数,并讨论测量结果与发动机工作状态的关系。最后,开展12%,15%与19%铝质量含量的不同推进剂配方固体火箭发动机羽流辐射光谱测量,将辐射光谱法温度测量值与理论热力计算值进行比较,两者最大偏差值为5.40%,讨论了不同铝含量推进剂发动机羽流辐射光谱特征,并结合温度与辐射率测量结果,分析了固体推进剂铝含量对辐射光谱、羽流温度及辐射率的影响。通过固体火箭发动机羽流辐射光谱测温方法研究,为固体火箭发动机性能评估及推进剂配方优化等研究提供了有效的羽流参数测量手段。分析获得的推进剂铝含量对发动机羽流辐射光谱、温度及辐射率参数的影响,为降低固体发动机羽流特征信号提供了重要的实验数据支撑。     

地面长波红外高光谱成像气体探测研究

报道了地面长波红外遥测的新进展 ,具体阐述了窗扫时空调制傅里叶光谱成像技术的实现过程.演示装置基于角锥反射镜M ichelson干涉具 ,构成了空间调制干涉 ;采用了制冷型长波红外焦平面探测器组件 ,通过对数据立方体的采集、重组、基线校正、切趾、相位校正和傅里叶变换等处理 ,实现了长波红外波段高光谱成像.自研的CHIPED-1长波红外高光谱成像原理实验装置的探测灵敏度指标噪声等效辐射通量密度NESR在单次采样时达到了5.6 × 10-8 W · (cm-1 · sr · cm2 )-1 ,与商品化时间调制干涉高光谱成像仪相当 ;反映了技术的先进性 ,并留有较大的改进空间.通过测试聚丙烯薄膜的透过率曲线 ,CHIPED-1红外高光谱成像原理实验装置的光谱响应范围达到了11. 5 μm.文章还以室外高楼和乙醚气体的探测实验为例 ,研究了二维分布化学气体VOC的高光谱成像探测方法.在复杂背景和低试验浓度情况下 ,从同一波数的红外光谱切片上 ,观察不出乙醚蒸气的存在 ,但是进行了差谱处理后 ,可以清楚看到乙醚蒸气的空间分布.高光谱方法应用在有机蒸气VOC的红外探测领域 ,相对于宽波段热成像方法 ,具有灵敏度高、抗干扰能力强和识别种类多等诸多优势.     

宽带相干反斯托克斯喇曼散射法诊断固体燃剂燃烧场

 报道了采用单次脉冲非稳腔空间增强探测 相干反斯托克斯喇曼散射（USED CARS）技术诊断常压下固体燃剂瞬态燃烧场温度和氮气浓度。采用宽带USED CARS技术，在固体燃剂瞬态燃烧场获得了较高信噪比的单次激光脉冲氮气Q支CARS实验谱，用CARS理论计算软件拟合CARS实验谱，给出了固体燃剂瞬态燃烧场温度和氮气浓度在不同高度的分布，固体燃剂燃烧场温度约2 250K、氮气相对浓度16%～20%。     

Flame Temperature Remote Measurement from Infrared Emission Line Intensities of Rotation-Vibration Band of Molecules

A theoretical investigation and method of temperature remote sensing determination from the infrared emission line intensities in the fine structure of the rotation—vibration band of the molecules are performed. We have applied the method to some flames that thier combustions are unstationary, short time and violent. The temperature obtained by this method is good agreement with modified sodium line reversal method data. Our results show that the IR emission remote sensing method is a very sensitive, rapid and accurate measured temperature technique.     

Single-pulse CARS spectra in solid propellant combustion at atmosphere pressure

The unstable-resonator spatially enhanced detection (USED) coherent anti-stokes Raman spectroscopy (CARS) measurements of temperature and N2 concentration in the combustion of solid propellant at atmosphere pressure are reported. The USED CARS measurement system has a high spatial solution of ~ 0.1 mm in diameter and 3 mm in length, and permits instantaneous measurement at 10-Hz rate. The single-pulse N2 Q-branch CARS spectra have been obtained from the propellant combustion. The temperatures and N2 concentrations of the propellant flame at different height have been achieved by fitting the experimental data to theoretical spectra. The results indicate that the temperature is up to ~ 2500 K with N2 concentration in a range from 10% to 26%.     

红外光谱技术在环境科学中的应用与展望

随着红外光谱仪的应用及化学计量学的发展,红外光谱法成为样品分析的有力工具和手段.特别是傅里叶变换红外光谱法较强的鉴别能力、准确的测定结果和快速的响应功能,使其在环境科学中的应用逐渐普及,在有机化合物和官能团鉴定方面的应用尤其广泛.文章综合论述了近10年来国内外红外光谱技术的发展及其在环境科学(液体环境、固体和气体环境监测,定性分析)中的应用,并对其应用前景进行了讨论.