含ME4(M＝Mo,W;E＝S,Se)单元簇合物的合成和红外谱表征

合成了一系列单立方烷Ｍ－Ｆｅ－Ｓｅ和Ｍ－Ｃｕ（Ａｇ）－Ｓ（Ｓｅ）簇合物,并用ＵＶ,ＩＲ和Ｘ－光衍射等方法对上述簇合物进行了分析。     

a-C∶H(N)薄膜结构的X射线光电子能谱分析

采用直流-射频等离子增强化学汽相沉积技术制备a-C∶H(N)薄膜，用X射线光电子能谱研究了混合气体中N₂含量对薄膜成分与结构的影响.a-C∶H(N)薄膜中含氮量可达9.09%.对a-C∶H(N)薄膜的C1s和N1s结合能谱的分析表明a-C∶H(N)薄膜的结构是由C₃N₄相镶嵌在sp²键结合的CN_x基体中组成.其中C₃N₄相中N和C原子比接近4∶3，不随薄     

Surface electronic structure of α-Mo2C(0 0 0 1)

The electronic structure of α-Mo₂C(0 0 0 1) has been investigated by angle-resolved photoemission spectroscopy utilizing synchrotron radiation. A sharp peak is observed at 3.3 eV in normal-emission spectra. Since the peak shows no dispersion as a function of photon energy and is sensitively attenuated by oxygen adsorption, the initial state of the peak is attributed to a surface state. Resonant photoemission study shows that the state includes substantial contribution of 4d orbitals of the Mo atoms in the second layer. The emissions with constant kinetic energies of 22 and 31 eV above the Fermi level (E_F) are found in normal-emission spectra, and these emissions are interpreted as originating from the Mo N₁N₂₃V and N₂₃VV Auger transitions, respectively.     

The corrosion behavior of intermetallic compounds Ni3(Si,Ti) and Ni3(Si,Ti) + 2Mo in acidic solutions

The corrosion behavior of the intermetallic compounds homogenized, Ni₃(Si,Ti) (L1₂: single phase) and Ni₃(Si,Ti) + 2Mo (L1₂ and (L1₂ + Ni_ss) mixture region), has been investigated using an immersion test, electrochemical method and surface analytical method (SEM; scanning electron microscope and EPMA: electron probe microanalysis) in 0.5 kmol/m³ H₂SO₄ and 0.5 kmol/m³ HCl solutions at 303 K. In addition, the corrosion behavior of a solution annealed austenitic stainless steel type 304 was studied under the same experimental conditions as a reference. It was found that the intergranular attack was observed for Ni₃(Si,Ti) at an initial stage of the immersion test, but not Ni₃(Si,Ti) + 2Mo, while Ni₃(Si,Ti) + 2Mo had the preferential dissolution of L1₂ with a lower Mo concentration compared to (L1₂ + Ni_ss) mixture region. From the immersion test and polarization curves, Ni₃(Si,Ti) + 2Mo showed the lowest corrosion resistance in both solutions and Ni₃(Si,Ti) had the highest corrosion resistance in the HCl solution, but not in the H₂SO₄ solution. For instance, it was found that unlike type 304 stainless steel, these intermetallic compounds were difficult to form a stable passive film in the H₂SO₄ solution. The results obtained were explained in terms of boron segregation at grain boundaries, Mo enrichment and film stability (or strength).     

Formamide reactions on rutile TiO2(0 1 1) surface

The reaction of formamide over the (0 1 1) faceted TiO₂(0 0 1) surface has been studied by Temperature Programmed Desorption (TPD) and X-ray Photoelectron Spectroscopy (XPS). Two main reactions were observed: dehydration to HCN and H₂O and decomposition to NH₃ and CO. The dehydration reaction was found to be three to four times larger than the decomposition at all coverages. Each of these reactions is found to occur in two temperature domains which are dependent upon surface coverage. The low temperature pathway (at about 400 K) is largely insensitive to surface coverage while the high temperature pathway (at about 500 K) shifts to lower temperatures with increasing surface coverage. These two temperature pathways may indicate two adsorption modes of formamide: molecular (via an η¹(O) mode of adsorption) and dissociative (via an η²(O,N) mode of adsorption). C1s and N1s XPS scans indicated the presence of multiple species after formamide absorption at 300 K. These occurred at ca. 288.5 eV (-CONH-) and 285 eV (sp³/sp² C) for the C1s and 400 eV-(NH₂), 398 eV (-NH) and 396 eV (N) for the N1s and result from further reaction of formamide with the surface.     

Effects of B′-site transition metal on the properties of double perovskites Sr2FeMO6 (M=Mo, W): B′ 4d-5d system

The crystal structure, magnetic and magnetotransport properties of the variation of B′-site transition metal in Sr₂FeMO₆ (M=Mo, W) with double perovskites structure have been investigated systematically. Measurements of magnetization vs. temperature at H=5 T show that Sr₂FeMoO₆ is a ferromagnet and Sr₂FeWO₆ is an antiferromagnet with T_N∼35 K. Additionally, the large magnetoresistance ratio (MR) of ∼22% (H=3 T) at room temperature (RT) was observed in the Sr₂FeWO₆ compound. However, the Sr₂FeMoO₆ compound did not show any significant MR even at high fields and RT (MR∼1%; H=3 T and 300 K). The implications of these findings are supported by band structure calculations to explain the interaction between the 4d(Mo) and 5d(W) orbitals of transition metal ions and oxygen ions.     

Impact of substituents in the NN ligand on the emission wavelength of Cu(I) complexes: Insight from experimental and theoretical approach

Three mononuclear Cu(I) complexes [Cu(bop)(PPh₃)₂][BF₄], [Cu(fop)(PPh₃)₂][BF₄] and [Cu (pop)(PPh₃)₂][BF₄] were synthesized, where 2-(5-tert-butyl-1,3,4-oxadiazol-2-yl)pyridine (bop), 2-(5-(trifluoromethyl)-1,3,4-oxadiazol-2-yl)pyridine (fop) or 2-(5-phenyl-1,3,4-oxadiazol-2-yl)pyridine (pop) was used as N^∧N chelate ligand and triphenylphosphine was used as ancillary ligand. Several substituents with different electronic effects, such as tert-butyl (t-Bu), trifluoromethyl (CF₃) and phenyl (Ph) groups, were introduced into the 1,3,4-oxadiazole moiety of the N^∧N chelate ligands. The photophysical properties of the complexes were examined by UV-vis absorption and photoluminescence (PL) spectroscopies. The complex [Cu(fop)(PPh₃)₂][BF₄] with a CF₃ group in the N^∧N chelate ligand exhibited the lowest energy absorption and emission band. Electrochemical analyses combined with density functional theory (DFT) calculations established that the introduction of electron withdrawing group (CF₃) decreases the HOMO-LUMO energy gap, and the introduction of electron donating group (t-Bu) into the 1,3,4-oxadiazole moiety has a similar effect on the emission wavelength as that of the introduction of a phenyl group with a π-conjugation.     

含氮氟化类金刚石(FN-DLC)薄膜的研究：(Ⅳ)氮掺杂对薄膜结构的影响

不同条件下，在单晶硅基片上沉积了含氮氟化类金刚石(FN-DLC)薄膜.原子力显微(AFM)形貌显示，掺N后，薄膜变得致密均匀.傅里叶变换吸收红外光谱(FTIR)表明，随着r(r=N₂/［N₂+CF₄+CH₄］)的增大薄膜中C—H键的逐渐减少，C〖FY=,1〗N和C≡N键含量逐渐增加.X射线光电子能谱(XPS)的C1s和N1s峰拟合结果发现，N掺入导致在薄膜中出现β-C₃N₄和a-CN_x(x=1,2,3)成分.Roman散射谱的G峰向高频方向位移和峰值展宽等证明：随着r的增大，薄膜内sp²键态含量增加. 关键词： 氟化类金刚石膜 键结构 氮掺杂     

Electronic structure and magnetism of V monolayer on a TM(0 0 1) (TM=Cr,Mo, W) surfaces: First-principles calculations

We investigated the electronic structure and magnetism of V monolayer (ML) on a TM(0 0 1)(TM=Cr, Mo, W) surface, using the full potential linearized augmented plane wave method based on density functional theory. General gradient approximation is used for exchange-correlation potential. The magnetic moments of the V ML's are calculated to be 1.33, 1.35, and 1.30 μ_B on Cr(0 0 1), Mo(0 0 1), and W(0 0 1) surfaces, respectively. All of the TM surfaces are coupled antiferromagnetically to the V monolayer and their magnetic moments are calculated to be −1.01, −0.26 and −0.17 μ_B for Cr, Mo and W substrates, respectively.     

Valence band and surface core-level shift studies of the oxygen-induced p(3 × 1) reconstruction of the W(1 0 0) surface

Using synchrotron radiation, W 4f_7/2 and valence-band (VB) photoelectron spectroscopy was used to study the oxidation states of the p(3 × 1) reconstructed surface of W(1 0 0) produced by oxygen adsorption at 1500 K. The W 4f_7/2 study showed two features at 0.40 and 1.50 eV higher binding energies relative to the bulk feature which represent shifts to lower binding energies compared to the W 4f_7/2 features of the as-grown oxygen films on W(1 0 0). Co-existence of these features is a characteristic of the formation of the p(3 × 1) structure. The VB studies of this system and as-grown oxygen films at room temperature (RT) showed an oxygen-induced feature for the p(3 × 1) structure for which the peak maximum had shifted by 0.9 eV to higher binding energies compared to the as-grown films. The direction of shifts in the W 4f_7/2 and VB spectra for the p(3 × 1) structure confirmed the reduction of the charge transfer from W to oxygen compared to the as-grown films. A study of the VB changes with photon energy shows that the main component of the oxygen-induced feature in the p(3 × 1) VB at 6.6 ± 0.2 eV is related to a hybridized state between W 5d and O 2p electrons.     

(Mo + N) codoped TiO2 for enhanced visible-light photoactivity

A series of Ti_1−xMo_xO_2−yN_y samples were prepared by using sol-gel method and characterized by X-ray diffraction, transmission electron microscopy and UV-vis absorption spectroscopy. All Ti_1−xMo_xO_2−yN_y samples are anatase phase. It is found that Mo, N mono-doping can increase visible light absorption, while (Mo + N) co-doping can greatly enhance absorption in whole visible region. Results of our first-principles band structure calculations reveal that (Mo + N)-doping, especially passivated co-doping can increase the up-limit of dopant concentration and create more impurity bands in the band gap of TiO₂, which leads to a greatly increase of its visible-light absorption without a decrease of its redox potential. It reveals that (Mo + N) co-doped TiO₂ is promising for a photocatalyst with high photocalystic activity under visible light.     

Preparation and properties of disordered NaBi(XO4)2, X=W or Mo, crystals doped with rare earths

NaBi_1−xRE_x(XO₄)₂, X=W or Mo and RE=Pr, Nd, Ho, Er and Yb single crystals have been grown by the Czochralski technique. Rare earth concentrations about 3.5×10²⁰ cm⁻³ have been achieved in crystals with good optical quality. Melt stability is obtained by synthesising NaBi(XO₄)₂ from the precursor Na₂X₄O₁₃ phase and minimising Mo volatility. The strength of W and Mo compounds to chemical attack and thermal annealing in several atmospheres is reported. Mo compound is etched by inorganic acids and becomes coloured after vacuum annealing. The optical absorption, photoluminescence and refractive indices of the hosts are characterised and show a dichroic character. The lattice disorder induces broadening of the 10 K optical absorption of the rare earth impurities.     

Mechanism and nature of phase transitions in the (NH4)3MoO3F3 oxyfluoride

The temperature dependences of the heat capacity, the unit cell parameter, and the permittivity for the (NH₄)₃MoO₃F₃ cryolite (space group Fm $ \overline 3 The temperature dependences of the heat capacity, the unit cell parameter, and the permittivity for the (NH₄)₃MoO₃F₃ cryolite (space group Fm m) are investigated. It is revealed that the compound undergoes ferroelectric and ferroelastic structural phase transitions at temperatures of 297 and 205 K, respectively. The mechanism of structural distortions is discussed in terms of the entropy parameters, pressure-temperature phase diagrams, and electron density maps for critical atoms. An analysis is made of the influence of the cation size and shape on the phase transitions in oxyfluorides of the general formula A ₂ A′MO₃ (A,A′ = NH₄, K; M = Mo, W). Original Russian Text ? I.N. Flerov, V.D. Fokina, A.F. Bovina, E.V. Bogdanov, M.S. Molokeev, A.G. Kocharova, E.I. Pogorel’tsev, N.M. Laptash, 2008, published in Fizika Tverdogo Tela, 2008, Vol. 50, No. 3, pp. 497–506.     

Epitaxial MoOx nanostructures on TiO2(1 1 0) obtained using thermal decomposition of Mo(CO)6

Stoichiometric and highly-defective TiO₂(1 1 0) surfaces (called as yellow and blue, respectively) were exposed to Mo(CO)₆ vapours in UHV and in a reactive O₂ atmosphere. In the case of yellow-TiO₂, an O₂ reactive atmosphere was necessary to obtain the Mo(CO)₆ decomposition at 450 °C with deposition of MoO_x nanostructures where, according to core level photoemission data, the Mo⁺⁴ state is predominant. In the case of blue-TiO₂ it was possible to obtain Mo deposition both in UHV and in an O₂ atmosphere. A high dose of Mo(CO)₆ in UHV on blue-TiO₂ allowed the deposition of a thick metallic Mo layer. An air treatment of this sample at 580 °C led to the elimination of Mo as MoO₃ and to the formation of a transformed layer of stoichiometry of Ti_(1−x)Mo_xO₂ (where x is close to 0.1) which, according to photoelectron diffraction data, can be described as a substitutional near-surface alloy, where Mo⁺⁴ ions are embedded into the titania lattice. This embedding procedure results in a stabilization of the Mo⁺⁴ ions, which are capable to survive to air exposure for a rather long period of time. After exposure of the blue-TiO₂(1 1 0) substrate to Mo(CO)₆ vapours at 450 °C in an O₂ atmosphere it was possible to obtain a MoO₂ epitaxial ultrathin layer, whose photoelectron diffraction data demonstrate that is pseudomorphic to the substrate.     

Chemical tuning of high-spin complexes based on 3- and 4-hydroxy-pentadentate-Fe (III) complex-units investigated by Mössbauer spectroscopy

The pentadentate ligands 3-OH-⁵L?=?[N,N′-Bis(1,3-dihydroxy-2-benzylidene)-1,7-diamino-4-azaheptane] and 4-OH-⁵L?=?[N,N′-Bis(1,4-dihydroxy-2-benzylidene)-1,7-diamino-4-azaheptane] has been prepared by a Schiff base condensation between 1,7-diamino-4-azaheptane and the dihydroxybenzaldehyde. Complexation with Fe(III) yields high-spin (S?=?5/2) complexes of [Fe^III(3-OH-⁵L)Cl] and [Fe^III(4-OH-⁵L)Cl]. These precursors were combined with [M(CN) _x ] ^y? (M?=?W(IV), Mo(IV), Ru(II), Co(III)) and heptanuclear and nonanuclear clusters of [M{(CN-Fe^III(3-OH-⁵L)} _x ]Cl _y and [M{(CN-Fe^III(4-OH-⁵L)} _x ]Cl _y resulted. Such starshaped hepta- and nonanuclear compounds are high-spin systems at room temperature. On cooling to 10 K some of the iron(III) centers switch to a second high-spin state as proven by Mössbauer spectra, i.e. multiple electronic transitions. Parts of the compounds perform a high-spin to high-spin transition.     

Surface mass diffusion and step stiffness on an anisotropic surface; Mo(0 1 1)

Results of step fluctuation experiments for Mo(0 1 1), using low-energy electron microscopy, are re-examined using recently developed procedures that offer accurate coefficients of surface mass diffusion. By these means, surface diffusion D_s is documented at T/T_m ∼ 0.5, while the crossover to relaxation driven by bulk vacancy diffusion is inferred for T/T_m ∼ 0.6. Here, T_m is the melting temperature T_m = 2896 K. We obtain D_s = 4 × 10⁻⁴ exp(−1.13 eV/k_BT) cm²/s for the temperature interval 1080-1680 K. Possible indications of diffusion along step edges appear for T/T_m ∼ 0.4. The same measurements of step fluctuation amplitudes determine also the step stiffness, which by symmetry is anisotropic on Mo(0 1 1). It is shown that three independent procedures yield mutually consistent step stiffness anisotropies. These are (1) step fluctuation amplitudes; (2) step relaxation rate anisotropies; and (3) the observed anisotropies of islands in equilibrium on the Mo(0 1 1) surface. The magnitude of the step stiffness obtained from step edge relaxation is consistent with earlier measurements that determine diffusion from grain boundary grooving.     

The Vibrational Spectra of Complexes with Planar Monothiooxamides. IV. The Copper(II) and Copper(I) Complexes of Neutral Monothiooxamides

The new complexes CuX₂(LH₂), CuX₂ (SH₃) (X = Cl, Br), CuX(LH₂), CuX(SH₃) (X = Cl, Br, I), CuX(H₄MTO)₂ (X = Cl, Br), Cul(H₄MTO) and CuX(H₃MMTO)₂ (X = Cl, Br, I), where LH₂ = N.N′-dimethyl-monothiooxamide, SH₃ = N(s)-methylmonothiooxamide, H₄MTO = monothiooxamide and H₃MMTO = N_(o)-methylmonothiooxamide, have been prepared. The complexes were characterized by elemental analyses, conductivity measurements, magnetic moments and spectroscopic (UV/VIS, FT-IR, Laser-Raman) studies. The vibrational analysis of the complexes has been given using NH/ND, CH₃/CD₃ and ⁶³cu/⁶⁵cu isotopic substitutions. The neutral monothiooxamides behave as monodentate ligands in the Cu(I) complexes coordinating through their thioamide sulfur atom. The ligands LH2 and SH₃ act as bidentate chelating agents in the Cu(II) complexes with ligated atoms being the thioamide sulfur and the amide oxygen.     

Selective MOCVD of titanium oxide and zirconium oxide thin films using single molecular precursors on Si(1 0 0) substrates

Titanium oxide (TiO₂) and zirconium oxide (ZrO₂) thin films have been deposited on modified Si(1 0 0) substrates selectively by metal-organic chemical vapor deposition (MOCVD) method using new single molecular precursor of [M(OⁱPr)₂(tbaoac)₂] (M=Ti, Zr; tbaoac=tertiarybutyl-acetoacetate). For changing the characteristic of the Si(1 0 0) surface, micro-contact printing (μCP) method was adapted to make self-assembled monolayers (SAMs) using an octadecyltrichlorosilane (OTS) organic molecule which has -CH₃ terminal group. The single molecular precursors were prepared using metal (Ti, Zr) isopropoxide and tert-butylacetoacetate (tbaoacH) by modifying standard synthetic procedures. Selective depositions of TiO₂ and ZrO₂ were achieved in a home-built horizontal MOCVD reactor in the temperature range of 300-500 °C and deposition pressure of 1×10⁻³-3×10⁻² Torr. N₂ gas (5 sccm) was used as a carrier gas during film depositions. TiO₂ and ZrO₂ thin films were able to deposit on the hydrophilic area selectively. The difference in surface characteristics (hydrophobic/hydrophilic) between the OTS SAMs area and the SiO₂ or Si-OH layer on the Si(1 0 0) substrate led to the site-selectivity of oxide thin film growth.     

Physical properties of tetragonal transition-metal borides Nb2MB2 (M = Mo,W, Re or Os) with a new superstructure

The mechanical and thermodynamic properties, chemical bonding characteristics and electronic structure of Nb₂MB₂ (M = Mo, W, Re or Os) with a new tetragonal U₃Si₂-type superstructure (space group P4/mnc, no. 128) were studied by means of density functional theory calculations. All Nb₂MB₂ structures studied were demonstrated to be thermodynamically and mechanically stable. The bulk, shear and Young's moduli, Poisson's ratio, Debye temperature and anisotropy factors were derived for ideal polycrystalline Nb₂MB₂ aggregates. Among these compounds, Nb₂WB₂ was found to have the highest shear modulus and hardness. The electronic densities of state and electronic localization function analysis revealed the metallicity and strong covalent B–B, Nb–B and M−B bonding in Nb₂MB₂. Moreover, these results reveal that the covalence between Nb 4d, M nd (n = 4 for Mo and 5 for W, Re and Os) and B 2p states is the cause of the relatively higher elastic modulus and hardness of the Nb-based compounds. Finally, thermodynamic properties, including the bulk modulus, heat capacity and thermal expansion coefficient of Nb₂WB₂ were obtained systematically under high temperature and pressure.     

Measurement of vibrational energy transfer of OH (A2Σ+,v′=1→0) in low-pressure flames

2 Σ⁺) was measured in a low-pressure H₂/O₂ flame for three rotational levels of OH (v^′=1). Rate coefficients for collisions with H₂O and N₂ were determined. At 1600 K, k_VET (N₂) is (in 10^-11 cm³s^-1) 10.1±2, 6.1±1.8, and 3.8±1.3 for N^′=0, 5, and 13, respectively. The k_VET (H₂O) is <1.1±1.8. The k_Q (N₂) is <2.4±8 for both vibrational levels. The k_Q (H₂O) in v^′=1 is 59.1±6.5, 54.7±6.4, and 54.9±6.6 for N^′=0, 5, and 13, respectively, and, determined indirectly, 74.6±10.4, 70.6±10.3, and 63.4±7.3 for N^′=0, 5, and 13 in v^′=0. A multi-level model of OH population dynamics, which is being developed for the quantitative simulation of experimental LIF spectra, was extended to include VET. It was attempted to simulate state-to-state-specific VET coefficients for N₂ collisions. From these simulations it appears that angular momentum conservation does not determine the N dependence of the vibrational relaxation step. Received: 9 September 1996/Revised version: 6 January 1997