Why cannot all divalent cations completely substitute the Pb cations of CH3NH3PbI3 perovskite?

Organic-inorganic hybrid CH₃NH₃PbI₃ perovskite has a great potential for applications in low-cost photovoltaic devices. However, the doped and substitution of Pb sites in CH₃NH₃PbI₃ has not been widely reported. In this article, a quantum mechanical model was applied to determine why all divalent cations cannot substitute the Pb cations of CH₃NH₃PbI₃ perovskite. The evaluation was performed by comparison the model with experimental results. On this basis, we carefully examined 42 types of cations and identified only nine kinds of cations including Ca²⁺, Sr²⁺, Sc²⁺, Ti²⁺, V²⁺, Y²⁺, Zr²⁺, Nb²⁺ and Sn²⁺ for doped into Pb sites. In these cases, it is expected that the corresponding compound would be single phase. Finally, an analysis was performed based on first principle, and the results indicate that divalent cations substituting the Pb sites modify the band structure and influence the performance of perovskite-based photostatics.     

Comparison of Inductively Coupled Plasma with Classical Analytical Techniques in the Analysis of Southern Oregon Lithia Water: Inclusion of a Local Resource in the Undergraduate Chemistry Curriculum

Abstract

Lithia water, a community resource of local historical significance, is described as a central theme in the undergraduate analytical chemistry sequence. A statistical comparison of the classical determination of major cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and anions (HCO₃ ^?, Cl^?) reinforces statistical and charge‐balance concepts covered in analytical chemistry. Subsequent determination of these major cations by inductively coupled plasma (ICP) enables students to statistically evaluate the presence of bias between instrumental and classical methods. The effect of easily ionized elements on ICP calibration sensitivity and linearity via the use of cesium as an ionization suppressor is reported.     

Investigating lanthanide dopant distributions in Yttrium Aluminum Garnet (YAG) using solid state paramagnetic NMR

This paper demonstrates the approach of using paramagnetic effects observed in NMR spectra to investigate the distribution of lanthanide dopant cations in YAG (yttrium aluminum garnet, Y₃Al₅O₁₂) optical materials, as a complimentary technique to optical spectroscopy and other standard methods of characterization. We investigate the effects of Ce³⁺, Nd³⁺, Yb³⁺, Tm³⁺, and Tm³⁺-Cr³⁺ on ²⁷Al and ⁸⁹Y NMR spectra. We note shifted resonances for both AlO₄ and AlO₆ sites. In some cases, multiple shifted peaks are observable, and some of these can be empirically assigned to dopant cations in known configurations to the observed nuclides. In many cases, AlO₆ peaks shifted by more than one magnetic neighbor can be detected. In general, we observe that the measured intensities of shifted resonances, when spinning sidebands are included, are consistent with predictions from models with dopant cations that are randomly distributed throughout the lattice. In at least one set of ²⁷Al spectra, we identify two sub-peaks possibly resulting from two paramagnetic cations with magnetically coupled spin states neighboring the observed nucleus. We identify systematic changes in the spectra related to known parameters describing the magnetic effects of lanthanide cations, such as larger shift distances when the expectation value of electron spins is greater. We lastly comment on the promise of this technique in future analyses of laser and other crystalline oxide materials.     

Stability of aqueous silica nanoparticle dispersions

In this study, we present quantification methods for nanoparticle stability analysis using non-intrusive analytical techniques: attenuated total reflectance, Fourier transform infrared (ATR-FTIR) spectroscopy, ultraviolet–visible (UV–vis) spectrophotometer, zeta potential analyses, and dynamic light scattering (DLS). We use these techniques to study the stability of silica nanoparticle dispersions and the effects of pH, temperature, and electrolytes that would be encountered in oil field brines in a reservoir. Spectral analysis of the Si–O bond at wavenumber of 1110 cm⁻¹ with the ATR-FTIR indicates a structural change on the surface of silica particles as the dispersion pH changes, which agrees with zeta potential measurements. We define a critical salt concentration (CSC) for different salts, NaCl, CaCl₂, BaCl₂, and MgCl₂, above which the silica dispersion becomes unstable. Three distinct stages of aggregation occur in the presence of salt: clear dispersed, turbid, and separated phases. Divalent cations Mg²⁺, Ca²⁺, and Ba²⁺ are more effective in destabilizing silica nanoparticle dispersion than the monovalent cation Na⁺. The CSC for Na⁺ is about 100 times more than for Ca²⁺, Ba²⁺, and Mg²⁺. Among the divalent cations studied, Mg²⁺ is the most effective in destabilizing the silica particles. The CSC is independent of silica concentration, and lowers at high temperature.     

A study of iso- and alio-valent cation doped Ag2SO4 solid electrolyte

2 SO₄. The solid solubility limits up to x≤3 mole% for monovalent, x≤5.27 mole% for divalent and x≤3.63 mole% for trivalent cation doped Ag₂SO₄ are set with XRD, SEM, IR and DSC techniques. A predominant dependence of conductivity on the ionic size of iso- and alio-valent cations is observed. In particular, the conductivity enhances in both α and β phases, despite having a lower ionic-size dopant cation (relative to that of Ag⁺) in the transition element cation doped Ag₂SO₄. Ca²⁺, Ba²⁺, Y³⁺ and Dy³⁺ doped samples show depature from the regular behaviour in the β-phase. The conductivity behaviour is discussed considering ionic size, valence and electronic structure of the guest cations. Received: 3 February 1997/Accepted: 27 May 1997     

Complexation and DFT studies of lower rim hexahomotrioxacalix[3]arene derivatives bearing pyridyl groups with transition and heavy metal cations. Cone versus partial cone conformation

The binding of representative alkali, alkaline earth, transition and heavy metal cations by 2‐pyridylmethoxy derivatives (1b, in cone and partial cone conformations) of p‐tert‐butylhexahomotrioxacalix[3]arene was studied. Binding was assessed by extraction studies of the metal picrates from water into dichloromethane and by stability constant measurements in acetonitrile and methanol, using spectrophotometric and potentiometric techniques. Microcalorimetric studies of some selected complexes in acetonitrile were performed, as well as proton NMR titrations. Computational methods (density functional theory calculations) were also employed to complement the NMR data. The results are compared with those obtained with the dihomooxacalix[4]arene 2b and the calix[4]arene 3b derivative analogues. Partial cone‐1b is the best extractant for transition and heavy metal cations. Both conformers of 1b exhibit very high stability constants for soft and intermediate cations Pb²⁺, Cd²⁺, Hg²⁺, Zn²⁺ and Ni²⁺, with cone‐1b the strongest binder (ML, log β ≥ 7) and partial cone‐1b the most selective. Both derivatives show a slight preference for Na⁺. Besides the formation of ML complexes, ML₂ and M₂L species were also observed. The former complexes were, in general, formed with the transition and heavy metal cations, whereas the latter were obtained with Ag⁺ and Hg²⁺ and partial cone‐1b. In most cases, these species were corroborated by the proton NMR and density functional theory studies. Copyright © 2013 John Wiley & Sons, Ltd.     

Turn-off Fluorescence Chemosensor for Iron with Bis(2-aminoethyl)-2-(9-fluorenyl)malonamide Functionlized SBA-15

An bis(2-aminoethyl)-2-(9-fluorenyl)malonamide as fluorophore ligand was immobilized onto mesoporous silica type SBA-15 via post synthesis grafting. The obtained material was characterized by small and wide angle X-ray diffraction, N₂ adsorption–desorption, Fourier transform infrared spectroscopy, Raman spectroscopy and thermogravimetric analysis that indicate the successful immobilization of the ligand on the surface of mesoporous silica. The sensing ability of the obtained material was studied by addition of the cations Fe³⁺, Mg²⁺, Cr³⁺, Co²⁺, Ni²⁺, Cu²⁺, Hg²⁺ and Zn²⁺ to water suspensions of the assayed solid. Of all the cations tested addition of Fe³⁺ ion to a suspension of this material resulted in the largest decrease in the fluorescence intensity. Turn-off photoluminescence of this material was remarkably observed for iron ions in comparing of the other cations. A good linearity between the fluorescence intensity of this material and the concentration of Fe³⁺ ion is constructed, which enables it as a fluorescence chemosensor for detecting the Fe³⁺ ion with a suitable detection limit of 1.35?×?10^?5. It can be introduced as a novel fluorescent sensor in aqueous solution for a lot of practical applications in chemical, environmental and biological systems.     

Investigation of the manganite CaMn7O12 through Fe probe Mössbauer spectroscopy in two different temperature domains

Mössbauer studies of ⁵⁷Fe-doped CaMn₇O₁₂ have been carried out over two paramagnetic ranges of temperature. The observed hyperfine parameters of ⁵⁷Fe spectra were discussed assuming that Fe³⁺ cations are mainly substituted for manganese cations in six-coordinated oxygen polyhedra. In the first temperature range , the values of quadrupole splitting (Δ₁?Δ₂) are evidence for two types of structural distortion of (MnO₆) polyhedra due to the ordering of Mn³⁺ and Mn⁴⁺ cations in (9d) and (3b) sites of a trigonal structure with a charge ordering. In the second temperature range , the observed temperature evolution of the line shape in ⁵⁷Fe spectra confirms two phenomena: (i) the structural phase transition of the trigonal phase to a high-temperature cubic structure, with the coexistence of both phases between 380 and 450 K; (ii) the existence of only non-distorted (MnO₆) octahedra due to the fast electronic exchange between Mn³⁺ and Mn⁴⁺ cations.     

Inhibition of iron corrosion in 0.5 M sulphuric acid by metal cations

Corrosion inhibitors are widely used in acid solutions during pickling and descaling. Mostly organic compounds containing N, O, and S groups are employed as inhibitors. In this study, the inhibition performance of metal cations such as Zn²⁺, Mn²⁺ and Ce⁴⁺ ions in the concentration range 1-10 × 10⁻³ M has been found out. The corrosion behaviour of iron in 0.5 M H₂SO₄ in the presence of metal cations is studied using polarization and impedance methods. It is found that the addition of these metal cations inhibits the corrosion markedly. The inhibition effect is in the following order Ce⁴⁺ ? Mn²⁺ > Zn²⁺.     

Effect of the ionic radius on jump frequencies of alkaline earth cations in NaCl crystals

By comparing diffusion coefficientsD of bivalent cations Ba²⁺, Ca²⁺, Sr²⁺ in NaCl crystals it was shown that in the temperature range above 550 °CD (Ba²⁺)>D (Sr²⁺)>D (Ca²⁺) is valid. Temperature dependences of jump frequenciesw ₂ of these cations are described byw ₂ (Ba²⁺)=(2·15±0·55) × 10¹² × exp {?(0·817±0.007)/kT};w ₂ (Sr²⁺)=(2·9±1·1) × 10¹² × exp {?(0·84±0.02)/kT} andw ₂ (Ca²⁺)=(5·5±6·5) × 10¹⁰ × exp {?(0·51±0·07)/kT}. It was demonstrated that in NaCl crystals the activation enthalpy and the preexponential factor of the jump frequencyw ₂ increase with increasing ionic radius and mass of the bivalent alkaline earth cation.     

Luminescence as an indication of distortion in A3+2 B4+2 O7 type pyrochlores

The Eu³⁺ luminescent emission spectra of rare-earth titanate, titanate-stannate, stannate, hafnate and zirconate pyrochlores, A³⁺₂B⁴⁺₂O₇, indicated that a linear relationship existed between the splitting of the ⁵D₀ → ⁷F₁ magnetic-dipole transition and the size of the cation present. Small A³⁺ cations and larger B⁴⁺ cations both produced a lattice with a lesser degree of deviation from O_h symmetry.     

Luminescence characteristics of Eu2+ activated Ca2SiO4 Sr2SiO4 and Ba2SiO4 phosphorsfor white LEDs

<正>This paper investigates the luminescence characteristics of Eu²⁺ activated Ca₂SiO₄,Sr₂SiO₄ and Ba₂SiO₄ phosphors. Two emission bands are assigned to the f-d transitions of Eu²⁺ ions doped into two different cation sites in host lattices,and show different emission colour variation caused by substituting M²⁺ cations for smaller cations.This behaviour is discussed in terms of two competing factors of the crystal field strength and covalence.These phosphors with maximum excitation of around 370 nm can be applied as a colour-tunable phosphor for light-emitting diodes（LEDs） based on ultraviolet chip/phosphor technology.     

Spectroscopic study of mono‐ and bis(styryl) dyes of the pyridinium series containing azathiacrown ether residue

Phenylazathiacrown ether monostyryl and bis(styryl) dyes were synthesized and their complex forming ability was evaluated in acetonitrile by absorption and fluorescence spectroscopy. It was found that dyes are sensitive to the presence of H⁺ and Hg²⁺, Ag⁺, Cu²⁺ cations. The most stable complexes were formed with mercury. Stability constants and UV–Vis spectra of complexes defined stoichiometry were determined with the use of HYPERQUAD program. Evidence was given for the occurrence of two stoichiometries: LM and LM₂. The pronounced optical response on complex formation was found both in absorption and emission spectra that could be used for optical detection of cations. Copyright © 2008 John Wiley & Sons, Ltd.     

Effect of Pendant Group Length Upon Metal Ion Complexation in Acetonitrile by Di-Ionized Calix[4]Arenes Bearing Two Dansyl Fluorophores

A series of three di-ionizable calix[4]arenes with two pendant dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims was synthesized. Structures of the three ligands were identical except for the length of the spacers which connected the two dansyl groups to the calix[4]arene scaffold. Following conversion of the ligands into their di-ionized di(tetramethylammonium) salts, absorption and emission spectrophotometry were utilized to probe the influence of metal cation (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) complexation in acetonitrile. Upon complexation with these metal cations, emission spectra underwent marked red shifts and quenching of the dansyl group fluorescence for the di-ionized ligand with the shortest spacer. A similar effect was noted for the di-ionized ligand with an intermediate spacer for all of the metal ions, except Ba²⁺. For the di-ionized ligand with the longest spacer, the metal cations showed different effects on the emission spectrum. Li⁺, Mg²⁺, Ca²⁺ and Ba²⁺ caused enhancement of emission intensity with a red shift. Other metal cations produce quenching with red shifts in the emission spectra. Transition metal cations interacted strongly with all three di-ionized ligands. In particular, Fe³⁺ and Hg²⁺ caused greater than 99% quenching of the dansyl fluorescence in the di-ionized ligands.     

Luminescence properties and mechanism of Zn1.92−xBaxSi1−yTiyO4:0.08Mn phosphors in VUV region

The present commercial phosphor Zn₂SiO₄:Mn²⁺ requires further improvement because of its long decay time. In this work, the co-doping effects of Ba²⁺ and Ti⁴⁺ upon emission intensity and decay time were investigated. Ba²⁺ and Ti⁴⁺ cations have favorable influences on the photoluminescent properties. When doped with appropriate amount of Ba²⁺, the intensity of green emission was increased 12% and the decay time was shortened 18%. When doped with appropriate amount of Ti⁴⁺, the luminescence intensity was enhanced a little, and the decay time was shortened 14%. Ba²⁺ and Ti⁴⁺ were co-doped in Zn₂SiO₄:Mn²⁺ system, the luminescence intensity was enhanced 18%, and the decay time was shortened sharply (about 31%).     

A Novel Naphthalene-Immobilized Nanoporous SBA-15 as a Highly Selective Optical Sensor for Detection of Fe<Superscript>3+</Superscript> in Water

A novel organic-inorganic hybrid optical sensor (SBA-NCO) was designed and synthesized through immobilization of isocyanatopropyl-triethoxysilane and 1-amino-naphthalene onto the surface of SBA-15 by post-grafting method. The characterization of materials using XRD, TEM, N₂ adsorption-desorption, and FT-IR techniques confirmed the successful attachment of organic moieties and preserving original structure of SBA-15 after modification step. Fluorescence experiments demonstrated that SBA-NCO was a highly selective optical sensor for the detection of Fe³⁺ directly in water over a wide range of metal cations including Na⁺, Mg²⁺, Al³⁺, K⁺, Ca²⁺, Cr³⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, and Pb²⁺ in a wide pH values.     

Solubility of highly charged anionic polyelectrolytes in presence of multivalent cations: Specific interaction effect

Studies performed on strong polyelectrolytes and on a weak polyelectrolyte, sodium poly(acrylate), show that their stability in presence of multivalent cations depends on the chemical nature of the charged side groups of the polymer. For sulfonate groups (SO₃ ^-) or sulfate groups (OSO₃ ^-) phase separation generally occurs in presence of inorganic cations of valency 3 (as La³⁺) or larger and a resolubilization takes place at high salt concentration. The interactions of the polyelectrolyte with multivalent cations are of electrostatic origin and the phase diagrams are weakly dependent on the chemical nature of the polymer backbone and on the specificity of the counterions. For acrylate groups, (COO^-), the phase separation was observed with inorganic cations of valency 2 (as Ca²⁺) or larger without resolubilization at high salt concentration. The phase separation is due to a chemical association between cations and acrylate groups of two neighboring monomers of the same chain. This chemical association creates a hydrophobic complex by dehydrating both monomer and cation. With organic trivalent cation, as spermidine ⁺H₃N(CH₂)₄NH₂ ⁺(CH₂)₃NH₃ ⁺, where no chemical association occurs with the charged side groups COO^- or SO₃ ^- of the polyelectrolyte, similar phase diagrams were observed whatever was the polyelectrolyte with a resolubilization at high trivalent cation concentration. Received 3 March 1999 and Received in final form 2 September 1999     

Theoretical design on a new double functional device of 2,2′‐bipyridine‐embedded N‐(9‐pyrenyl methyl)aza‐15‐crown‐5

Theoretical design on a new molecular switch and fluorescent chemosensor double functional device of aza‐crown ether (2,2′‐dipyridine‐embedded N‐(9‐anthraceneyl(pyrenyl)methyl)aza‐15‐crown‐5) was explored. The interactions between ligands and a series of alkaline earth metal cations (Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺) were investigated. The fully optimized geometry structures of the free ligands ( L _1, L ₂) and their metal cation complexes ( L ₁/M²⁺, L ₂/M²⁺) were calculated with the B3LYP/6‐31G(d) method. The natural bond orbital analysis, which is based on optimized geometric structures, was used to explore the interaction of L ₁/M²⁺, L ₂/M²⁺ molecules. The absorption spectra of L _1, L ₂, L ₁/M²⁺, and L ₂/M²⁺, and their excited states were studied by time‐dependent density functional theory. A new type molecular device L ₂(2,2′‐dipyridine‐embedded N‐(9‐pyrenyl methyl)aza‐15‐crown‐5) is designed, which not only has the selectivity for Sr²⁺, and construct allosteric switch, but also has fluorescent sensor performance.     

Fullerene-C60 and crown ether doped on C60 sensors for high sensitive detection of alkali and alkaline earth cations

Fullerenes are effective acceptor components with high electron affinity for charge transfer. The significant influences of chemical adsorption of the cations on the electrical sensitivity of pristine C₆₀ and 15-(C₂H₄O)₅/C₆₀ nanocages could be the basis of new generation of electronic sensor design. The density functional theory calculation for alkali and alkaline earth cations detection by pristine C₆₀ and 15-(C₂H₄O)₅/C₆₀ nanocages are considered at B3LYP level of theory with 6–31 G(d) basis set. The quantum theory of atoms in molecules analysis have been performed to understand the nature of intermolecular interactions between the cations and nanocages. Also, the natural bond orbital analysis have been performed to assess the intermolecular interactions in detail. Furthermore, the frontier molecular orbital, energy gap, work function, electronegativity, number of transferred electron (∆N), dipole moment as well as the related chemical hardness and softness are investigated and calculated in this study. The results show that the adsorption of cations (M=Na⁺, K⁺, Mg²⁺ and Ca²⁺) are exothermic and the binding energy in pristine C₆₀ nanocage and 15-(C₂H₄O)₅/C₆₀ increases with respect to the cations charge. The results also denote a decrease in the energy gap and an increase in the electrical conductivity upon the adsorption process. In order to validate the obtained results, the density of state calculations are employed and presented in the end as well.     

Spectroscopic properties, energy transfer and structural analysis of Sr2CeO4:M+ and Sr2CeO4:Eu3+, M+ (M+ = Li+, Na+, K+)

The room-temperature luminescent emission characteristics of Sr₂CeO₄:M⁺ and Sr₂CeO₄:Eu³⁺,M⁺ (M⁺ = Li⁺, Na⁺, K⁺) have been investigated under UV excitation. By introducing appropriate alkali metal cations dopants (Li⁺, Na⁺, K⁺) into the crystalline lattice, not only emission color of the blue-white-emitting Sr₂CeO₄ doped with low Eu³⁺ content can be tuned to green, but also the red emission intensity of Sr₂CeO₄ doped with high Eu³⁺ concentration is strengthened significantly. The relevant mechanisms have been elucidated in detail.