The Tamm surface state on Cu(111) and Ag(111)

It is shown, that the well-known d-electron Tamm surface-state emission observed in photoelectron spectra from Cu(111) at the M̄ point in the surface Brillouin zone, is indeed due to such a surface state and not a bulk band transition as recently suggested L. Wallden, Solid State Commun. 59, 205 (1986). A similar surface state on Ag(111) is reported.     

Ag(111)和Au(111)上铋的初始生长行为

半金属铋(Bi)的表面合金具有的Rashba效应,和其具体结构性质有重要关联.本文结合扫描隧道显微镜(STM)和密度泛函理论(DFT),系统地研究了Bi原子在Ag(111)和Au(111)上的不同初始生长行为.在室温Ag(111)上,连续的Ag2Bi合金薄膜会优先在Ag台阶边缘形成;在570 K Ag(111)上,随着...     

Nature of versatile chemisorption on TiC(111) and TiN(111) surfaces

Density-functional calculations on the polar TiX(111) (X = C, N) surfaces show (i) for clean surfaces, strong Ti3d-derived surface resonances (SR’s) at the Fermi level and X2p-derived SR’s deep in the upper valence band and (ii) for adatoms in periods 1-3, pyramidic trends in atomic adsorption energies, peaking at oxygen (9 eV). A concerted-coupling model, where adatom states couple to both kinds of SR’s in a concerted way, describes the adsorption. The chemisorption versatility and the general nature of the model indicate ramifications and predictive abilities in, e.g., growth and catalysis.     

Angle-resolved photoemission study of Pd(111) and Co/Pd(111)

Electronic structure of epitaxial Co films on Pd(111) has been investigated as a function of the Co overlayer thickness, by using angle-resolved photoemission spectroscopy (ARPES). It is found that experimental band structures for Pd(111) and work functions for Co/Pd(111) agree reasonably well with the results of band structure calculations. Compared to Pd(111), valence band ARPES spectra of Co/Pd(111) support the existence of the induced magnetic polarization of Pd atoms near the interface, suggesting large hybridization between Co 3d and Pd 4d states near the interface.     

Vibration spectroscopy of benzene adsorbed on Pt(111) and Ni(111)

High resolution electron energy loss spectroscopy has been applied to study the adsorption of benzene (C₆H₆ and C₆D₆) on Pt(111) and Ni(111) single crystal surfaces between 140 and 320 K. The vibrational spectra provide evidence that benzene is chemisorbed with its ring parallel to the surface, predominantly π bonded to the platinum and nickel surface respectively. A significant frequency increase of the CH-out-of-plane bending mode, largest in the case of platinum, is observed compared to the free molecule. On both metals two phases of benzene exist simultaneously, characterized by a different frequency shift. The shifts are explained by electronic interaction between the metal d-orbitals and molecules adsorbed in on top and threefold hollow sites respectively. The vibrational spectra of the multilayer condensed phase of benzene exhibit the infrared active modes of the gasphase molecule as expected.     

Anisotropic photoemission and chemisorption-bond geometry on Ge(111) and Si(111) surfaces

In order to study the effects of photon-polarization selection rules on chemisorptionbond geometry, we have measured photoelectron spectra as a function of angle of incidence, θ_i, in the range 28° ? θ ? 80°. A noble-gas UV resonance lamp and cylindrical mirror analyzer were used to measure both bonding and non-bonding surface Orbitals. A large enhancement (200–400%) of the photocmission is found when photon electric field intensity is near the maximum normal to the surface. This indicates a spatial variation of microscopic fields which is approximately independent of adsorbate bonding since it is determined by the optical properties of the substrate. In addition, we observe some effects on adsorbate photoelectron peaks due to different orbital symmetry. The case of atomic hydrogen chemisorption is discussed as an example of this latter effect.     

采用(meta)-GGA泛函对Ag(111)、Rh(111)和Ir(111)上乙烯吸附的理论研究

本文针对在多种催化反应的重要中间体乙烯,使用(meta)-GGA等级的包含PBE,BEEF-vdW,SCAN以及SCAN+rVV10在内的多种交换关联泛函,系统研究了在过渡金属表面(Ag,Rh和Ir)上乙烯吸附势能面对泛函的依赖关系. 研究发现,对于乙烯在贵金属Ag(111)上的吸附,除了PBE外,BEEF-vdW,SCAN以及SCAN+rVV10均能预测出物理吸附态的存在. 对于乙烯在Rh(111)面的吸附,SCAN和SCAN+rVV10预测在化学吸附位之前存在有物理吸附前驱态,而基于PBE和BEEF-vdW的势能面并没有发现前驱态的存在. 而对于乙烯在Ir(111)上的吸附,BEEF-vdW也能微弱地预测出化学吸附前驱态的存在. 研究结果表明,无论在哪一种金属表面上,四种泛函中SCAN+rVV10给出的吸附能最强,其次是SCAN,最后是PBE或者BEEF-vdW.     

Auger spectra of carbon monoxide chemisorbed on Pt(111) and Cu(111)

The Auger spectra of carbon monoxide adsorbed on Pt(111) and Cu(111) are compared. The characteristic features now regarded as a fingerprint of this adsorbed species are observed, even for the weakly adsorbed CO on copper which gives complex X-ray photoelectron spectra. No coverage dependence of the spectra was observed on either substrate. The C lsVV spectrum of CO/Cu(111) is dominated by transitions involving the “screening” electron in the 2π orbital.     

岩盐结构SrC(111)表面和(111)界面的d~0半金属性

利用第一性原理方法,本文研究了岩盐结构的SrC块材、(111)表面和(111)界面的电子结构和磁性.块材的SrC被证实是一个良好的d~0半金属铁磁体.计算结果显示(111)方向的C表面和Sr表面都保持了块材的半金属性.对于(111)方向四个可能的界面,态密度的计算显示C-Pb界面呈现半金属特性.本文对岩盐结构SrC块材、(111)表面和(111)界面半金属性的研究结果,将为高性能自旋电子器件的实际应用提供一定的理论指导.     

Silicene on hydrogen‐passivated Si(111) and Ge(111) substrates

By means of first‐principles calculations we predict the stability of silicene as buckled honeycomb lattice on passivated substrates of group‐IV(111)1 × 1 surfaces. The weak van‐der‐Waals interaction between silicene and substrates does not destroy its linear bands forming Dirac cones at the Brillouin zone corners. Only very small fundamental gaps are opened around the Fermi level.

     

局域功函数图像及其在Cu(111)-Au/Pd表面的应用

用扫描隧道显微镜（STM）对Cu(111)-Au和Cu(111)-Pd表面的局域功函数进行了研究.通过 测量隧道电流对针尖样品间距的响应，得到了与STM形貌图一一对应的表面局域功函数图像. 实验发现，Au/Pd覆盖层和Cu衬底间的功函数有明显的不同.Pd薄膜的功函数甚至超过了其体 本征值，且功函数在台阶处变小.用偶极子的形成解释了台阶处功函数的降低.这一工作表明 ，用测量局域功函数的方法容易区分表面上不同的元素，并具有纳米尺度的空间分辨率. 关键词： 扫描隧道显微镜 局域功函数 台阶     

On diffusion lengths of Ga adatoms on AlAs(111) and GaAs(111) surfaces

An expression for calculating the effective diffusion length from the measured values of the height and density of nanowhiskers is derived in terms of the diffusion growth model. From experimental data for GaAs nanowhisker MBE growth, the diffusion lengths of Ga adatoms on the GaAs(111) and AlAs(111) surfaces are evaluated. Under typical growth conditions, the value of the Ga diffusion length is found to be about several hundreds of nanometers.     

Adsorption-desorption properties and surface structural chemistry of chlorine on Cu(111) and Ag(111)

The adsorption, desorption, and structural properties of chlorine adlayers on Cu(111) and Ag(111) have been studied by LEED, Auger, Δ?, and thermal desorption measurements. Ancillary experiments were also carried out on cuprous chloride for purposes of comparison with the Cu(111)-Cl data. Chlorine adsorption is rapid on both metals and follows precursor kinetics, the absolute initial sticking probabilities being ~1.0 (Cu) and ~0.5 (Ag). Δ? results suggest that significant depolarisation of the chemisorption bond occurs at high coverages, the maximum values being + 1.2 eV (Cu) and + 1.8 eV (Ag). On Cu(111), adsorption leads to the formation of a sequence of well-ordered phases; in order of increasing coverage, these are as follows: (√3 × √3)R30°, (12√3 × 12√3)R30°, (4√7 × 4√7)R19.2°, and (6√3 × 6√3)R30°. On Ag(111) (√3 × √3)R30°, and (10 × 10) structures are observed. All six structures are susceptible to a straightforward interpretation in terms of coincidence lattices resulting from the progressive uniform compression of a hexagonal layer of Cl atoms. This interpretation is consistent with all the experimental results, and gives values for the nearest-neighbour ClCl spacing on both Cu(111) and Ag(111) which are in good agreement with other work on other surfaces. Chlorine desorbs exclusively as atoms from both metals with first-order desorption kinetics, and apparent desorption energies of 236 (Cu) and 209 (Ag) kJ mol^?1. These values, which depend on an assumed pre-exponential factor of 10¹³ s^?1, are shown to be inconsistent with the thermochemical constraints on the system necessitated by the complete absence of Cl₂ desorption. Lower limits for the pre-exponential factors are then deduced, and the values are found to be consistent with the differences between the CuCl and AgCl systems.