Synthesis and Spectroscopic Properties of Iron(H) Complex with Sterically Encumbered Thiolate Ligand: 2,4,6-Triphenylbenzenethiolate

Abstract

Novel iron(II) complex of 2,4,6-triphenylbenzenethiolate (tpbt) was synthesized by ligand exchange reaction of (Et₄N)2[Fe^II(S-t-Bu)₄] with tpbt-H. The complex shows absorption maxima at 277 nm (36500 M^?1cm^?1) and 367 nm (22800 M^?1 cm^?1), and Fe²⁺/Fe³⁺ redox potential at-0.78 V vs SCE in acetonitrile. While in tetrahydrofuran solution, the complex is found to be unstable and form a Fe(II) complex with low coordination number.     

Mössbauer studies of anion-substituted iron chlorophylls

The electronic structure of anion-substituted iron chlorophyll a [Fe(Chl-a)X] and b [Fe(Chl-b)X] (X=Cl^?, NCS^?, Br^?, I^?, CH₃COO^?) has been characterized by Mössbauer spectroscopy. The central iron ion in these complexes is in a ferric high-spin state. The π-donation from the anion plays an important role in the bonding between the iron ion and the anion. The quadrupole splitting reflects the structural difference between iron chlorophylls and iron porphyrins.     

Infrared Spectra of Some Metal (II) Complexes of 2-Aminomethylpyridine

Abstract

Band assignments in the IR spectra (700–150 cm^?1) of [M(amp)₃] (ClO₄)₂ (amp = 2-aminomethylpyridine; M = Mn(II), Fe(II), Co(II), Ni(II), Zn(II), [Zn(amp)₂Cl₂] and [Pt(amp)Cl₂] derived from amp-ND₂, their unlabelled analogues, [Zn(amp)₂X₂] (X = Br, I) and [Pt(amp)Br₂] are discussed.     

Mössbauer and magnetic studies on the spin states of diiron(III)-porphyrin dicopper(II) complexes

Several biological model complexes of cytochrome c oxidase analogues, such as X₂(TPP)₂Fe₂(Apen)Cu₂Cl₄, where TPP=5, 10, 15, 20-tetraphenylporphine, Apen=bis(acetylpyrazine)-ethylenediimine, X=Cl^–, N ₃ ^– , Im, 1-Me-Im, 2-Me-Im, 4-Me-Im and OCH ₃ ^– , were prepared. The electronic spin states of these complexes in solid state were studied by means of Mössbauer and EPR spectroscopies and magnetic susceptibility measurements. The iron(III) atom of these complexes is present in different spin states, depending upon the nature of the axial ligand X of Fe(III)-porphyrin; the N ₃ ^– , Cl^–, OCH ₃ ^– , 2-Me-Im axial groups lead to complexes in a pure high-spin state independent of temperature. In contrast, the imidazole axial groups (e.g. Im, 4-Me-Im) behave differently and all show a temperature dependence of the⁶A₁ ²T₂ spin transition. The magnetic exchange behavior between Fe and Cu atoms in the present complexes is also discussed.     

Condensation Product of 1-Naphthaldehyde and 3-Aminophenol: Fluorescent “on” Probe for Ce3+and “off” Probe for Dichromate (Cr2O72−)

A new probe (Z)-3-((naphthalen-1-ylmethylene)amino)phenol has been synthesized by condensation reaction between 1-naphthaldehyde and 3-aminophenol for the fluorescent sensing of Ce³⁺ by “on” mode and dichromate (Cr₂O₇^2?) by “off” mode. Metal ions—Ag⁺, Al³⁺, As³⁺, Ba²⁺, Ca²⁺, Cd²⁺, Ce⁴⁺, Co²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Fe²⁺, Fe³⁺, Hg²⁺, K⁺, La⁺, Li⁺, Mg²⁺, Mn²⁺, Na⁺, Ni²⁺, Pb²⁺, Zn²⁺and anions Br^?, C₂O₄^2?, CH₃COO^?, Cl^?, CO₃^2?, F^?, H₂PO₄^?, HCO₃^?, HF₂^?, HPO₄^2?, I^?, MnO₄^?, NO₃^?, OH^?, S^2?, S₂O₃^2?, SCN^?, SO₄^2? do not interfere. The limit of detection (LOD) for sensing Ce³⁺ and Cr₂O₇^2? ions are 1.286?×?10^–7 M and 6.425?×?10^–6 M, respectively.

     

The Application of Raman Spectroscopy to the Study of the Uranyl Mineral Coconinoite Fe2Al2(UO2)2(PO4)4(SO4)(OH)2 · 20H2O

ABSTRACT

Raman spectra of the uranyl-containing mineral coconinoite, Fe₂Al₂(UO₂)₂(PO₄)₄(SO₄)(OH)₂ · 20H₂O, are presented and compared with the mineral's infrared spectra. Bands connected with (UO₂)²⁺, (PO₄)^3?, (SO₄)^2?, (OH)^?, and H₂O stretching and bending vibrations are assigned. Approximate U?O bond lengths in uranyl, (UO₂)²⁺, and O?H…O hydrogen bond lengths are calculated from the wavenumbers of the U?O stretching vibrations and (OH)^? and H₂O stretching vibrations, respectively, and compared with published data for similar natural and synthetic compounds.     

Effects of doping site and pre-sintering time on microstructure and magnetic properties of Fe-doped BaTiO3 ceramics

The A-site substituted BaTiO₃ ceramics were prepared by solid-state reaction via partial substitution of Fe for Ba²⁺. By comparison with the B-site substituted sample made under similar conditions, the effect of Fe doping site on microstructure and magnetism was investigated using X-ray diffraction, Mössbauer spectroscopy and vibrating sample magnetometer. It is found that A-site substitution can be realized to a certain extent at 7 at% Fe addition, whereas impurities are observed at higher Fe concentrations. In the nominal (Ba_0.93Fe_0.07)TiO₃ sample, the Fe ions are present as Fe²⁺ and Fe³⁺, respectively, replacing A-site Ba²⁺ and octahedral B-site Ti⁴⁺ in hexagonal perovskite lattice. The double-exchange Fe²⁺-O²⁻-Fe³⁺ interactions produce ferromagnetism well above room temperature, but the saturation magnetization and the Curie temperature are both obviously lower than those for B-site substitution due to different magnetic exchange mechanisms. In the B-site substituted sample Ba(Ti_0.93Fe_0.07)O₃, the super-exchange interactions between Fe³⁺ on pentahedral and octahedral Ti⁴⁺ sites are responsible for ferromagnetism. These results mean that B-site substitution is a better way for Fe-doped BaTiO₃ system to obtain high-Curie-temperature ferromagnetism. Moreover, increasing pre-sintering time can further improve the magnetism of B-site substituted samples, through which the saturation magnetization for Ba(Ti_0.93Fe_0.07)O₃ is enhanced ∼6 times.     

Monitoring synchrotron X‐ray‐induced radiolysis effects on metal (Fe,W) ions in high‐temperature aqueous fluids

Radiolysis‐induced effects on aqueous tungsten ions are observed to form a precipitate within seconds upon exposure to a synchrotron X‐ray micro‐beam in a WO₃ + H₂O system at 873 K and 200 MPa. In situ Fe K‐edge energy‐dispersive X‐ray absorption spectroscopy (ED‐XAS) measurements were made on Fe(II)Cl₂ aqueous solutions to 773 K in order to study the kinetics of high‐temperature reactions of Fe²⁺ and Fe³⁺ ions with transient radiolysis species. The radiolytic reactions in a fluid sample within a hydrothermal diamond anvil cell result in oxidation of the Fe²⁺ ion at 573 K and reduction of Fe³⁺ at temperatures between 673 and 773 K and of the Fe²⁺ ion at 773 K. The edge‐energy drift evident in the ED‐XAS data directly reflects the kinetics of reactions resulting in oxidation and/or reduction of the Fe²⁺ and Fe³⁺ ions in the aqueous solutions at high temperatures. The oxidation and reduction trends are found to be highly consistent, making reliable determinations of reaction kinetics possible.     

Fourier Transform Infrared and Raman Spectra of Metal Halide Complexes of 3,5-Lutedine in Relation to Their Structures

Abstract

Fourier transform infrared (4000-200 cm¹) and Raman (3500-50 cm^?1) spectra are reported for metal(II) halide 3,5-lutidine (3,5-dimethylpyridine) complexes of the following stoichiometries: M(3,5L)₄X₂ M=Co or Ni, X=C1 or Br; M=Mn or Cu, X=Br; M=Cd, X=I; M(3,5L)₃X₂ M=Fe, X=C1; M=Cu, X=Br; Hg(3,5L) X₂ X=C1 or Br.

Vibrational assignments are given for all the observed bands. Some structure- spectra correlations are found. For a given series of isomorphous complexes the sum of the difference between the liquid and ligand values of the vibrational modes of 3,5-lutidine is found to increase in the order of the second ionization potentials of the metals. The frequency shifts are also found to depend on the halogen.     

In situ Mössbauer spectroscopic study on cobalt and iron molybdates and their mixtures with Bi2(MoO4)3 during propene mild oxidation

Several Co and Fe and mixed Co, Fe molydates have been studied by Mössbauer spectroscopy at 360–415°C in a flow C₃H₆+O₂+N₂ 100/100/560 Torr, with and without adding Bi₂ (MoO₄)₃. It is concluded that cobalt stabilizes Fe²⁺ sites and Bi₂(MoO₄)₃ stabilizes Fe³⁺ in solid solution and it is proposed that Fe²⁺?Fe³⁺ pairs act as active sites in propene mild oxidation.     

Effect of N-substitution in multinuclear complexes allows interplay between magnetic states and multistability investigated by Mössbauer spectroscopy

A series of pentadentate ligands N–X–⁵LH₂ (X?=?H, Methyl, Benzyl)?=?N–X–saldptn (4-X-N,N′-bis(1-hydroxy-2-benzylidene)-1,7-diamino-4-azaheptane) has been prepared by a Schiff base condensation between 1,7-diamino-4-X-azaheptane and salicylaldehyde. Complexation with Fe(III) yields a series of high-spin (S?=?5/2) complexes of [Fe^III(N–X–⁵L)Cl]. Such precursors were combined with [Mo(CN)₈]^4? and a series of blue nonanuclear cluster compounds [Mo^IV{(CN)Fe^III(N–X–⁵L)}₈]Cl₄ resulted. Such star-shaped nonanuclear compounds are high-spin systems at room temperature. On cooling to 10 K some of the iron(III) centers switched to the low-spin state as proven by Mössbauer spectra, i.e. multiple electronic transitions. Parts of the compounds perform a high-spin to high-spin transition. Under light irradiation the populations are altered slightly.     

Synthesis of ultrasmall magnetic iron oxide nanoparticles and study of their colloid and surface chemistry

Colloidal nanoparticles of Fe₃O₄ (4 nm) were synthesized by high-temperature hydrolysis of chelated iron (II) and (III) diethylene glycol alkoxide complexes in a solution of the parent alcohol (H₂DEG) without using capping ligands or surfactants: [Fe(DEG)Cl₂]²⁻+2[Fe(DEG)Cl₃]²⁻+2H₂O+2OH⁻→Fe₃O₄+3H₂DEG+8Cl⁻ The obtained particles were reacted with different small-molecule polydentate ligands, and the resulting adducts were tested for aqueous colloid formation. Both the carboxyl and α-hydroxyl groups of the hydroxyacids are involved in coordination to the nanoparticles’ surface. This coordination provides the major contribution to the stability of the ligand-coated nanoparticles against hydrolysis.     

Zn2+-Schiff’s Base Complex as an “On–Off-On” Molecular Switch and a Fluorescence Probe for Cu2+ and Ag+ Ions

The present study presents a thorough theoretical analysis of the electronic structure and conformational preference of Schiff’s base ligand N,N-bis(2-hydroxybenzilidene)-2,4,6-trimethyl benzene-1,3-diamine (H₂L) and its metal complexes with Zn²⁺, Cu²⁺ and Ag⁺ ions. This study aims to investigate the behavior of H₂L and the binuclear Zn²⁺ complex (1) as fluorescent probes for the detection of metal ions (Zn²⁺, Cu²⁺ and Ag⁺) using density functional theory (DFT) and time-dependent density functional theory (TDDFT). The six conformers of the H₂L ligand were optimized using the B3LYP/6–311?+??+?G** level of theory, while the L^?2-metal complexes were optimized by applying the B3LYP functional with the LANL2DZ/6–311?+??+?G** mixed basis set. The gas-phase and solvated Enol-cis isomer (E-cis) was found to be the most stable species. The absorption spectra of the E-cis isomer and its metal complexes were simulated using B3LYP, CAM-B3LYP, M06-2X and ωB97X functionals with a 6–311?+??+?G** basis set for C, O, N and H atoms and a LANL2DZ basis set for the metal ions (Zn²⁺, Cu²⁺ and Ag⁺). The computational results of the B3LYP functional were in excellent agreement with the experimental results. Hence, it was adopted for performing the emission calculations. The results indicated that metal complex (1) can act as a fluorescent chemosensor for the detection of Ag⁺ and Cu²⁺ ions through the mechanism of intermolecular charge transfer (ICT) and as a molecular switch “On–Off-On” via the replacement of Cu²⁺ by Ag⁺ ions, as proved experimentally.

     

Mössbauer spectra study on Xiu-Yan Jade

Having beautiful colours and fine features, Xiu-Yan Jade is famous in the world. Mineralogically, Xiu-Yan Jade is serpentine jade. XRD, IR and TEM study indicate that the jade consists mainly of antigorite (m{Mg_3(1?1/m)[Si₂O₅](OH)_1+3(1?2/m)}) with a minor amount of chrysotile. Two favourite samples (P_XA, P_X1?t) are chosen for research on⁵⁷Fe Mössbauer spectra. Two sets of quadrupole doublets are obtained from the spectra, The parameters of two samples, 1. 124 mm/s and 1. 119 mm/s of I. S. and 2. 732mm/s and 2. 716mm/s of Q. S. for Fe²⁺ in the octahedral and 0. 364mm/s and 0. 351mm/s of I. S. 0. 632 and 0. 546mm/s of Q. S. for Fe³⁺ in the octahedral, are only antigorite. Studies indicate that: (1) iron—ion in antigorite enters the lattice as impurity: (2)Fe²⁺ and Fe³⁺ substitute for Mg in the coordination octahedron: and (3) the colour of jade is related to content of Fe, and Fe³⁺/Fe²⁺≤1 is favourite for colour—forming.     

Analysis of XPS spectra of Fe and Fe ions in oxide materials

Samples of the iron oxides Fe_0.94O, Fe₃O₄, Fe₂O₃, and Fe₂SiO₄ were prepared by high temperature equilibration in controlled gas atmospheres. The samples were fractured in vacuum and high resolution XPS spectra of the fractured surfaces were measured. The peak positions and peak shape parameters of Fe 3p for Fe²⁺ and Fe³⁺ were derived from the Fe 3p XPS spectra of the standard samples of 2FeO·SiO₂ and Fe₂O₃, respectively. Using these parameters, the Fe 3p peaks of Fe₃O₄ and Fe_1−yO are analysed. The results indicate that high resolution XPS techniques can be used to determine the Fe²⁺/Fe³⁺ ratios in metal oxides. The technique has the potential for application to other transition metal oxide systems.     

Mechanism of formation of magnetite from ferrous hydroxide in aqueous corrosion processes

The stoichiometric conditions for the formation of ferrous hydroxide Fe(OH)₂, by mixing Fe²⁺ ions with caustic soda NaOH, leads by oxidation to magnetite, irrelevant of the foreign anions, e.g. Cl^? or SO₄ ^2?, as demonstrated from Mössbauer spectroscopy. The electrochemical potential E_h and pH value of the initial conditions correspond to the drastic change from basic to acidic medium, observed when varying the initial Fe²⁺/OH^? ratio. Mössbauer analysis of the end products of oxidation at various temperatures shows that magnetite is only obtained at stoichiometry at very low temperature, but extends off stoichiometry at higher temperatures. The mechanism of formation of magnetite through an intermediate compound is discussed.     

Comparison of Inductively Coupled Plasma with Classical Analytical Techniques in the Analysis of Southern Oregon Lithia Water: Inclusion of a Local Resource in the Undergraduate Chemistry Curriculum

Abstract

Lithia water, a community resource of local historical significance, is described as a central theme in the undergraduate analytical chemistry sequence. A statistical comparison of the classical determination of major cations (Na⁺, K⁺, Ca²⁺, Mg²⁺) and anions (HCO₃ ^?, Cl^?) reinforces statistical and charge‐balance concepts covered in analytical chemistry. Subsequent determination of these major cations by inductively coupled plasma (ICP) enables students to statistically evaluate the presence of bias between instrumental and classical methods. The effect of easily ionized elements on ICP calibration sensitivity and linearity via the use of cesium as an ionization suppressor is reported.     

EPR study on the chemistry and photochemistry of copper(II) dithiocarbamate mixed-ligand complexes

The thermal and photochemical reactions of the 1∶1 mixed-ligand complexes Cu(dtc)X (X=Cl^?, NO₃ ^?, ClO₄ ^?) have been studied on the ground of their EPR spectra in acetone, CCl₄/i-PrOH (1∶1), and CHCl₃/i-PrOH (1∶1) solutions. The study allows us to get some insight into the behaviour of the mixed-ligand Cu^II(dtc)X complexes with respect to the acceptor properties of halocarbons. In CCl₄/i-PrOH (1∶1) both Cu^II(dtc)⁺…NO₃ ^? and Cu^II(dtc)⁺…ClO₄ ^? undergo thermal reactions within their donor-acceptor complexes with CCl₄ to yield Cu(dtc)Cl. On the time scale of the experiment the reaction does not occur thermally in CHCl₃/i-PrOH (1∶1), but occurs photochemically in both halocarbon/i-PrOH (1∶1) systems in which Cu(dtc)Cl is further photolyzed to CuCl₂. Continuous photolysis of the title compounds in acetone simply bleaches the solution without any intermediate EPR or light absorption.     

Synthesis and Characterization of 2,2-Biimidazole Complexes of Oxocations of Molybdenum (VI,V) and Uranium(VI)

Abstract

2,2′-Biimidazole complexes of MoO₂ ⁺², MoO₂ ⁺ and UO₂ ⁺² have been prepared and characterized by elemental analysis, conductance; and ¹H NMR, IR and electronic spectra. Two types of complexes have been identified. Those obtained from slightly acidic solutions have the formulae MoO₂ (H₂bim)Cl₂.2H₂O 1, UO₂(H₂bim) (Ac)₂ 2 and UO₂(H₂bim)Cl₂.2H₂O 3; whereas those from alkaline solutions have the formulae Mo₂O₄(Hbim)₂.2H₂O 4, and MO₂(Hbim)₂ (M = Mo(VI) 5, U(VI) 6). The infrared spectra of these complexes show characteristic biimidazole frequencies in the 3200–2500, 1550–1000 and 750 cm^?1 regions as well as metal oxygen double bonds in the 900 cm^?1 region. The stoichiometries of the acetate complex has been confirmed from ¹H NMR signal ratios of bimidazole to acetate protons at 7.3 and 2.3 ppm, respectively. The electronic spectrum of molybdenum(V) complex showed d-d transition band at ?13,500 cm^?1 in accord with that reported for copper (d⁹) imidazole complexes; as well as peaks due to charge transfer bands at 30,000–26,000 cm^?1 Peaks assignable to BIM → U(VI) were located at ?26,600 cm^?1. The most probable structures of these complexes have been suggested.     

Luminescence of defect centres in Hg2Cl2

Abstract

Luminescence in Hg₂Cl₂, crystals excited with UV light is investigated in the spectral region 0.8–2.25 eV. Measurements are performed on as-grown samples and on samples previously exposed to UV light at RT. Six emission bands are found which depend on the concentration of the photochemical entities produced by irradiation of the crystals at RT. It is concluded that infra-red (IR) luminescence of Hg₂Cl₂ originates from crystal defects. The observed emission bands are tentatively attributed to the emission of (HgCI_xBr_3?x)^? and (HgCl_xBr_4?x)^2? complexes formed with residual Br impurities. Centres responsible for IR Hg₂Cl₂ emissions are excited: (i) via excitons of Hg₂Cl₂, (ii) via excited states of isolated Hg₂Br₂ molecules, and (iii) resonantly through the excitation bands of defect centres.