Determination of Protoporphyrin IX Disodium Salt Based on Fluorescence Quenching of Glutathione-Capped Cadmium/Tellurium Quantum Dots

ABSTRACT

Aqueous glutathione-capped cadmium/tellurium quantum dots with a diameter of about 3 nm were synthesized. The fluorescence was quenched in the presence of protoporphyrin IX disodium salt, with the excitation wavelength at 320 nm. Under the optimal conditions, the quenched fluorescence intensity was linear in the range of 0.096–16 µg · mL^?1 with a concentration of protoporphyrin IX disodium salt, and the detection limit (3σ) was 2.8 × 10^?2 µg · mL^?1. The proposed method has been applied to the determination of protoporphyrin in serum samples with satisfactory results. The interaction mechanism was investigated.     

Study on the Interaction Between Oxymatrine and Tungstosilicic Acid by Resonance Rayleigh Scattering and Its Analytical Applications

In the 0.1 mol · L^?1 hydrochloric acid solution, oxymatrine reacted with tungstosilicic acid to form a 2:1 ion-association complexes. This results in a great enhancement of resonance Rayleigh scattering. The maximum resonance Rayleigh scattering wavelength was located at 393 nm. Resonance Rayleigh scattering intensity was proportional to the concentration of oxymatrine in the range of 1.5–26.4 µg · mL^?1, and the detection limit (3σ) was 0.23 µg · mL^?1. The optimum conditions and the effects of coexisting substances on the reaction were investigated. The method shows a wide linear range and high sensitivity, and was applied to the determination of oxymatrine in marine capsules and human urine samples with satisfactory results. Therefore, a highly sensitive, simple, and quick method has been developed for the determination of oxymatrine.     

Flow Injection Kinetic Spectrophotometric Determination of Cerium Based on the Decolorization Reaction Between Arsenazo III and Cerium (IV)

ABSTRACT

Trace amounts of cerium were analyzed by flow injection kinetic spectrophotometry, based on the decolorization reaction between arsenazo III and Ce(IV) in sulfuric acid medium at room temperature. The absorbance difference (ΔA) of decolorization was linear with the concentration of Ce(IV). The flow injection technique was used to precisely control the timing. Under the optimum conditions, the determination of Ce(IV) in the range 0.0–8.0 µg mL^?1 with a correlation coefficient (r) of 0.9982, the regression equation was ΔA = 0.0014 + 0.0406c (µg mL^?1). The detection limit (3σ) of 0.2 µg mL^?1 was achieved at a sampling frequency of 60 h^?1. The proposed method was applied to the analyses of Ce in soil successfully.     

Determination of dimethoate and phosmet pesticides with surface-enhanced Raman spectroscopy

ABSTRACT

Surface-enhanced Raman spectroscopy spectra of dimethoate and phosmet pesticides were recorded using a Klarite substrate. Significant enhancements were achieved with dimethoate over a concentration range of 0.5–10 µg mL^?1 and phosmet over a concentration range of 0.1–10 µg mL^?1. The best prediction model for dimethoate pesticide was achieved with a correlation coefficient of 0.940 and a root mean square error of prediction of 0.864 µg mL^?1, with the first derivative and standard normalized variate data preprocessing, and the best prediction model of phosmet pesticide was achieved with a correlation coefficient of 0.949 and a root mean square error of prediction of 0.741 µg mL^?1 with the first derivative data preprocessing. Our study shows that pesticides, including dimethoate and phosmet, could be quantitatively measured at as low as 0.5 µg mL^?1 level using surface-enhanced Raman technology coupled with a Klarite substrate and the results indicated that surface-enhanced Raman spectroscopy with a Klarite substrate has potential for the analysis of dimethoate and phosmet residues.     

Preconcentration and Separation of Gold(III) from Ore Samples by Solid-Phase Extraction Prior to Its Catalytic Fluorescent Determination

ABSTRACT

A new catalytic kinetic fluorescent quenching method for the determination of trace gold(III) was investigated. The method was based on the catalytic effect of gold on oxidation of 3-(3′-methylphenyl)-5- (2′-arsenoxylphenylazo) rhodanine by hydrogen peroxide in potassium hydrogen phthalate–hydrochloric acid (pH = 3.4). Under the optimum conditions, the great decrease of fluorescence intensity has a linear relationship against the concentration of gold in the range of 0 to 12.0 µg·L^?1 with a detection limit of 6.0 × 10^?10g·L^?1. The coexistent metal ions can be separated, and gold can be enriched by TBP resin of solid-phase extraction, which greatly improves the selectivity and sensitivity of the system. The method can be used to determine trace amounts of gold in ore samples successfully with satisfactory results.     

Evaluation of Laser Ablation Inductively Coupled Plasma Mass Spectrometry for the Quantitative Determination of Lead in Different Parts of Archeological Human Teeth

ABSTRACT

The lead content of teeth or tooth-parts has been used a biomarker of cumulative lead exposure in clinical, epidemiological, environmental, and archaeological studies. Through the application of laser ablation inductively coupled plasma mass spectrometry, a pilot study of the micrometer-scale distribution and quantification of lead was conducted for two human teeth obtained from an archaeological burial site in Manhattan, New York, USA. Lead was highly localized within each tooth, with accumulation in circumpulpal dentine and cementum. The maximum localized lead content in circumpulpal dentine was remarkably high, almost 2000 µg g^?1, compared to the mean enamel and dentine content of about 5 µg g^?1. The maximum lead content in cementum was approximately 700 µg g^?1. The large quantity of cementum found in the teeth suggested that the subjects had hypercementosis (excess cementum formation) of the root, a condition reported to have been prevalent among African-American slave populations. The distribution of lead in these human teeth was remarkably similar to the distribution that we previously reported in the teeth of present-day lead-dosed goats. The data shown demonstrate the feasibility of using laser ablation inductively coupled plasma mass spectrometry to examine lead exposure in archaeological studies.     

Mixture Design Optimization of an Analytical Procedure for Iron Extraction and Determination From Cassava Leaves by Slurry Sampling Flame Atomic Absorption Spectrometry

ABSTRACT

This paper applies statistical simplex-centroid design to mixture modeling for optimization of the liquid phase composition of cassava slurry leaves in the development of an analytical procedure for iron determination using flame atomic absorption spectrometry (FAAS). This procedure is based on a slurry formation from powdered cassava leaves and a liquid mixture composed of HNO₃, HCl, and H₂O₂ after an ultrasonication process. A quadratic model fitted to the analytical response shows the existence of an experimental region, characterized by low proportions of H₂O₂, for which higher responses are obtained. The proposed procedure allows the determination of iron in the cassava leaves with a detection limit of 1.1 µg g^?1. The precision expressed as relative standard deviation (%RSD, n = 10) was 1.5% for iron concentrations of 25 µg g^?1. The developed procedure was validated by the comparison of results obtained from the application of the digestion procedure and the analysis of certified reference materials: Apple leaves (NIST 1515). Results found were in agreement with the certified values. The proposed method was applied for the determination of iron in four samples of cassava leaves acquired in markets of Feira de Santana City, Brazil. The concentration of iron found in the cassava leaves varied from 250.8 ± 0.7 to 283.4 ± 0.7 µg g^?1.     

Determination of Protein by Fluorescence Enhancement of Curcumin in Lanthanum-Curcumin-Sodium Dodecyl Benzene Sulfonate-Protein System

We found that the fluorescence intensity of the lanthanum (La³⁺)-curcumin (CU) complex can be highly enhanced by proteins in the presence of sodium dodecyl benzene sulphonate (SDBS). Based on this finding, a new fluorimetric method for the determination of protein was developed. Under optimized conditions, the enhanced intensities of fluorescence are quantitatively in proportion to the concentrations of proteins in the range 0.0080?C20.0 ??g·mL^?1 for bovine serum albumin (BSA) and 0.00080?C20.0 ??g·mL^?1 for human serum albumin (HSA) with excitation of 425 nm, and 0.00020?C20.0 ??g·mL^?1 for bovine serum albumin (BSA) and 0.00080?C20.0 ??g·mL^?1for human serum albumin (HSA) with excitation of 280 nm, while corresponding qualitative detection limits (S/N????3) are as low as 5.368, 0.573, 0.049, 0.562 µg·mL^?1, respectively. Study on reaction mechanism reveals that proteins can bind with La³⁺, CU and SDBS through self-assembling function with electrostatic attraction, hydrogen bonding, hydrophobic interaction and van der Waals forces, etc. The proteins form a supermolecular association with multilayer structure, in which La³⁺-CU is clamped between BSA and SDBS. The unique high fluorescence enhancement of CU is resulted through synergic effects of favorable hydrophobic microenvironment provided by BSA and SDBS, and efficient intermolecular energy transfer among BSA, SDBS and CU. In energy transfer process, La³⁺ plays a crucial role because it not only shortens the distance between SDBS and CU, but also acts as a ??bridge?? for transferring the energy from BSA to CU.     

Sensitive Detection of Luteolin Using Thioglycolic Acid–Capped Cadmium Telluride/Cadmium Sulphide Quantum Dots as the Fluorescent Probe

ABSTRACT

A sensitive and simple method for the determination of luteolin (LTL) was developed based on the fluorescence quenching effect of LTL for thioglycolic acid–capped (TGA-capped) CdTe/CdS quantum dots (QDs). Under optimum conditions, a good linear relationship was obtained from 0.3 to 20.0 µg · mL^?1 with a correlation coefficient of 0.9972, and the detection limit was 7.2 ng · mL^?1. The fluorescence quenching mechanism has been proposed on the basis of electron transfer supported by ultraviolet-visible (UV-Vis) absorption, fluorescence (FL) spectroscopy. The proposed method was successfully applied to the determination of LTL in commercial capsules and human urine samples. It manifested several advantages such as high sensitivity, short analysis time, low cost, and ease of operation.     

Comparative Study on Three Different Systems of Chemiluminescence Flow‐Injection Determination of Leucogen

Abstract

The effects of three systems on the chemiluminescence (CL) intensity have been studied in this paper, such as leucogen–potassium permanganate–rhodamine B, leucogen–cerium (IV)–rhodamine B, and leucogen–luminol–hydrogen peroxide (called system 1, system 2, and system 3, respectively). The mechanism of these reactions is also discussed. Surfactant (CTMAB) has a remarkably sensitive effect on these systems mentioned above. Therefore, three new flow injection chemiluminescence methods for the determination of leucogen have been established. For system 1, the linear range is 8.0×10^?8 to 4.0×10^?5 g mL^?1, with limits of detection 2×10^?8 g mL^?1; the relative standard deviation is 2.5% (n=11, Cs=4.0×10^?6 g mL^?1). For system 2, the linear range is 1.0×10^?8 to 5.0×10^?6 g mL^?1, with limits of detection 3×10^?9 g mL^?1; the relative standard deviation is 5.1% (n=11, Cs=1.0×10^?6 g mL^?1). For system 3, the linear range is 4.0×10^?8 to 2.0×10^?6 g mL^?1, with limits of detection 1×10^?8 g mL^?1; the relative standard deviation is 1.3% (n=11, Cs=1.0×10^?7 g mL^?1). Compared with the three methods above, system 3 is confirmed as the best method. This method has been applied to the determination of leucogen with satisfactory results.     

Native Fluorescence Determination of Pyridoxine Hydrochloride (Vitamin B6) in Pharmaceutical Preparations After Sorption on Sephadex SP C‐25

A simple, batch mode, solid phase spectrofluorimetric procedure has been developed for the determination of pyridoxine hydrochloride (PY) (vitamin B₆). The method is based on the measurement of the native fluorescence of the analyte at 395 nm (λ_exc = 295 nm) sorbed on Sephadex SP C‐25 beads. The cation‐exchange gel, previously equilibrated with the sample solution, is packed in a 1‐mm quartz cell in which the measurements are performed (diffuse transmitted fluorescence).

The method responds linearly in the measuring range of 50–500, 10–100 and 5–40 μg·l^? 1 with detection limits of 9.5, 2.3 and 0.60 μg·l^? 1 for 10, 25 and 50 ml of sample volume, respectively.

The relative standard deviation (n = 10) for the determination of 100 (10 ml), 60 (25 ml) and 30 μg·l^? 1 (25 ml) of PY is 1.3%, 2.2% and 3.7%, respectively. The method, which shows increasing sensitivity as the sample volume increases, was satisfactorily applied to the determination of vitamin B₆ in pharmaceutical preparations using the procedure for 10 ml of sample.     

Preconcentration and Determination of Manganese and Nickel from Various Water Samples by Nano Zirconium Oxide/Boron Oxide

ABSTRACT

This work assesses the potential of the adsorptive material nano zirconium oxide/boron oxide (ZrO₂/B₂O₃) for removal of trace Mn(II) and Ni(II) from environmental samples. This method is based on the sorption of Mn(II) and Ni(II) ions directly onto nanosorbent, followed by the elution and determination by flame atomic absorption spectrometry (FAAS). Experimental parameters, including pH of sample solution, volume and concentration of eluent, sample volume, and flow rate of sample solution, that affect the recovery of the Mn(II) and Ni(II) ions from model solutions have been optimized. Under the optimum conditions, adsorption isotherms and adsorption capacities have been examined. The recoveries of Mn(II) and Ni(II) were 96% ± 2% and 95% ± 3% at 95% confidence level, respectively. The analytical detection limits for Mn(II) and Ni(II) were 1.9 and 4.9 µ g L^?1, respectively. Adsorption capacities of the nano ZrO₂/B₂O₃ were found as 92.8 mg g^?1 for Mn and 168.4 mg g^?1 for Ni. The accuracy of the method was checked by analyzing certified reference material (SPS-WW1 wastewater) and spiked real samples. The method was applied for the determination of analytes in water samples.     

Investigations on the EPR parameters and tetragonal distortions for Cu2+ in alkali lead tetraborate glasses

The electron paramagnetic resonance parameters (g factors and hyperfine structure constants) and local structures are theoretically investigated for Cu²⁺ in alkali lead tetraborate 90R₂B₄O₇·9PbO·CuO (R = Li, Na and K) glasses based on the high-order perturbation calculations for a tetragonally elongated octahedral 3d⁹ complex. The [CuO₆]^10? complexes are found to experience the relative tetragonal elongation ratios 18%, 23% and 30% for R = Li, Na and K, respectively, due to the Jahn–Teller effect, much larger than those for similar ARbB₄O₇ (A = Li, Na and K) glasses. This point is attributed to the lattice expansion (longer A–O bond lengths) with doped PbO, yielding lower force constants and more intense Jahn–Teller elongations in the 90R₂B₄O₇·9PbO·CuO glasses. The increasing tendency (Li > Na > K) of the relative elongation ratio λ, covalency and the ratio Δg_///Δg_⊥ for g-shifts are systematically analysed in a uniform way.     

Fluorimetric Determination of Ketorolac in Urine by Stopped-Flow Sequential Injection Analysis

ABSTRACT

An automatic fluorescence method was developed for the determination of ketorolac tromethamine. The method is based on the direct oxidation of the analyte by an acidic solution of permanganate, being the resulting fluorescence measured at 227 nm/320 nm (λ_ex/λ_em). The reaction is carried out online due to the use of the Sequential Injection Analysis methodology. A detection limit of 0.12 µ g mL^?1 and a R.S.D. lower than 3% (n = 10) were obtained under optimum conditions. The analyte was satisfactorily determined in pharmaceuticals and urine samples. Recovery experiments were carried out on human urine, with recoveries in the range 92–108%.     

An improved solid-state reaction route to Mg2+-doped LiFePO4/C cathode material for Li-ion battery

An improved solid-state reaction route has been employed to synthesize Mg²⁺-doped LiFePO₄/C nanocomposite cathode by calcining the precursor obtained via evaporating the mixture of ascorbic acid, LiCH₃COO·2H₂O, Mg(CH₃COO)₂·4H₂O, and amorphous FePO₄ nanoparticles in anhydrous ethanol under continuous stirring. Ascorbic acid used here acted as both reducing agent and carbon source. The amorphous FePO₄ was pre-prepared via a simple and fast oxidic precipitation method. Electrochemical tests showed that the final product exhibited good rate and cycling performance, with discharge capacities of 145.2 mAh g^?1 at 0.2 C, 129.8 mAh g^?1 at 1 C, 107.6mAh g^?1 at 5 C, and 81.4 mAh g^?1 at 20 C, respectively. The Mg²⁺-doped LiFePO₄/C showed enhanced charge–discharge performance compared with undoped LiFePO₄/C, especially at high rates. The enhanced electrochemical performance of the composite could be attributed to a combination result of the fine particle size with narrow particle size distribution, homogeneous carbon coating on the surface of the particles, and magnesium ion doping.     

The optimal condition for H<Subscript>2</Subscript>TiO<Subscript>3</Subscript>–lithium adsorbent preparation and Li<Superscript>+</Superscript> adsorption confirmed by an orthogonal test design

An orthogonal test design was applied to confirm the optimum condition for H₂TiO₃–lithium adsorbent preparation and Li⁺ adsorption. Extraction and adsorption mechanism and cycle performance were studied. The verified optimal condition is confirmed as the Li⁺ concentration, adsorption temperature, molar ratio of Li/Ti, reaction, and pre-calcination temperature are 4.0 g L^?1, 60 °C, 2.2, and 650 and 25 °C, respectively. Under the optimal condition, the adsorptive capacity reaches 57.8 mg g^?1. Adsorptive capacity of the adsorbent maintains in 5 cycles, typically 25–30 mg g^?1.     

Flow‐Injection Online Reduction Atomic Fluorescence Spectrometry Determination of Se(IV) and Se(VI) with Electrochemical Hydride Generation

Abstract

A new flow‐injection online reduction electrochemical hydride generation system for the determination of Se(IV) and Se(VI) by atomic fluorescence spectrometry (AFS) was developed. In the system, an electromagnetic induction oven was used as heating resource to reduce Se(VI) to Se(IV) and a homemade tubular electrolytic cell as hydride generator. All analytical procedures were automatically controlled by a computer. The conditions of online reduction, including temperature, HCl concentration, and reduction time, have been studied in detail. The detection limits (3σ) of Se(IV) and Se(VI) in aqueous solution were 0.26 µg L^?1 and 0.23 µg L^?1, respectively. The precision for 11 replicate measurements of 50 µg L^?1 Se(IV) and Se(VI) was 2.2% and 2.5%. This proposed method has been applied to the determination of Se(IV) and Se(VI) in springwater samples.     

210Pb in magnesium dietary supplements

The idea behind this study was to investigate the most popular magnesium dietary supplements as a potential additional source of ²¹⁰Pb in the human diet. The paper presents the results of ²¹⁰Pb activities determined in different magnesium supplements, as well as an estimation of the annual effective radiation doses from ²¹⁰Pb decay. The results showed that the highest value of ²¹⁰Pb activity was found in a magnesium supplement of natural origin (dolomite) with a value of 2.97?±?0.18 mBq g^–1. The highest annual radiation dose from ²¹⁰Pb obtained from the magnesium daily recommended value (0.4 g of pure Mg) was calculated for dolomite tablets as 3.71?±?0.02 µSv·year^–1.