Photoelectron spectroscopy of anions at 118.2 nm: observation of high electron binding energies in superhalogens MCl4- (M=Sc, Y, La)

High energy photon is needed for photoelectron spectroscopy (PES) of anions with high electron binding energies, such as superhalogens and O-rich metal oxide clusters. The highest energy photon used for anion PES in the laboratory has been 157 nm (7.866 eV) from F2 eximer lasers. Here, we report an anion PES experiment using coherent vacuum ultraviolet radiation at 118.2 nm (10.488 eV) by tripling the third harmonic output (355 nm) of a Nd:YAG laser in a XeAr cell. Our study focuses on a set of superhalogen species, MCl(4) (-) (M=Sc, Y, La), which were expected to possess very high electron binding energies. While the 157 nm photon can only access the ground state detachment features for these species, more transitions to the excited states at binding energies higher than 8 eV are observed at 118.2 nm. The adiabatic detachment energies are shown to be, 6.84, 7.02, and 7.03 eV for ScCl(4) (-), YCl(4) (-), and LaCl(4) (-) eV, respectively, whereas their corresponding vertical detachment energies are measured to be 7.14, 7.31, and 7.38 eV.     

Electronic spectrum and photodissociation of ClONO in comparison to BrONO

A theoretical study of the low-lying singlet and triplet states of ClONO is presented. Calculations of excitation energies and oscillator strengths are reported using multireference configuration interaction, MRD-CI, methods with the cc-pVDZ + sp basis set. The calculations predict the dominant transition, 4(1)A' <-- 1(1)A', at 5.70 eV. The transition 2(1)A' <-- 1(1)A', at 4.44 eV, with much lower intensity nicely matches the experimental absorption maximum observed around 290 nm (4.27 eV). The potential energy curves for both states are found to be highly repulsive along the Cl-O coordinate implying that direct and fast dissociation to the Cl + NO2 products will occur. Photodissociation along the N-O coordinate is less likely because of barriers on the order of 0.3 eV for low-lying excited states. A comparison between the calculated electronic energies related to the two dominant excited states of ClONO and BrONO indicates that the transitions lie about 0.6 eV higher if bromine is replaced by chlorine. The stratospheric chemistry implications of ClONO and BrONO are discussed.     

Stoichiometric and oxygen-rich M2O(n)- and M2O(n) (M = Nb, Ta; n = 5-7) clusters: molecular models for oxygen radicals, diradicals, and superoxides

We investigated the structures and bonding of two series of early transition-metal oxide clusters, M(2)O(n)(-) and M(2)O(n) (M = Nb, Ta; n = 5-7) using photoelectron spectroscopy (PES) and density-functional theory (DFT). The stoichiometric M(2)O(5) clusters are found to be closed shell with large HOMO-LUMO gaps, and their electron affinities (EAs) are measured to be 3.33 and 3.71 eV for M = Nb and Ta, respectively; whereas EAs for the oxygen-rich clusters are found to be much higher: 5.35, 5.25, 5.28, and 5.15 eV for Nb(2)O(6), Nb(2)O(7), Ta(2)O(6), and Ta(2)O(7), respectively. Structural searches at the B3LYP level yield triplet and doublet ground states for the oxygen-rich neutral and anionic clusters, respectively. Spin density analyses reveal oxygen radical, diradical, and superoxide characters in the oxygen-rich clusters. The M(2)O(7)(-) and M(2)O(7) clusters, which can be viewed to be formed by M(2)O(5)(-/0) + O(2), are utilized as molecular models to understand dioxygen activation on M(2)O(5)(-) and M(2)O(5) clusters. The O(2) adsorption energies on the stoichiometric M(2)O(5) neutrals are shown to be surprisingly high (1.3-1.9 eV), suggesting strong capabilities to activate O(2) by structural defects in Nb and Ta oxides. The PES data also provides valuable benchmarks for various density functionals (B3LYP, BP86, and PW91) for the Nb and Ta oxides.     

Probing the electronic and structural properties of chromium oxide clusters (CrO3)n(-) and (CrO3)n (n = 1-5): photoelectron spectroscopy and density functional calculations

Photoelectron spectroscopy has been conducted for a series of (CrO3)n(-) (n = 1-5) clusters and compared with density functional calculations. Well-resolved photoelectron spectra were obtained for (CrO3)n(-) (n = 1-5) at 193 nm (6.424 eV) and 157 nm (7.866 eV) photon energies, allowing for accurate measurements of the electron binding energies, low-lying electronic excitations for n = 1 and 2, and the energy gaps. Density functional and molecular orbital theory (CCSD(T)) calculations were performed to locate the ground and low-lying excited states for the neutral clusters and to calculate the electron binding energies of the anionic species. The experimental and computational studies firmly establish the unique low-spin, nonplanar, cyclic ring structures for (CrO3)n and (CrO3)n(-) for n > or = 3. The structural parameters of (CrO3)n are shown to converge rapidly to those of the bulk CrO3 crystal. The extra electron in (CrO3)n(-) (n > or = 2) is shown to be largely delocalized over all Cr centers, in accord with the relatively sharp ground-state photoelectron bands. The measured energy gaps of (CrO3)n exhibit a sharp increase from n = 1 to n = 3 and approach to the bulk value of 2.25 eV at n = 4 and 5, consistent with the convergence of the structural parameters.     

Structural and electronic properties of reduced transition metal oxide clusters, M4O10 and M4O10- (M = Cr, W), from photoelectron spectroscopy and quantum chemical calculations

Anion photoelectron spectroscopy and quantum chemical calculations at the density functional theory (DFT), coupled cluster theory (CCSD(T)), and complete active space self-consistent field (CASSCF) theory levels are employed to study the reduced transition metal oxide clusters M(4)O(10)(-) (M = Cr, W) and their neutrals. Photoelectron spectra are obtained at 193 and 157 nm photon energies, revealing very different electronic structures for the Cr versus W oxide clusters. The electron affinity and HOMO-LUMO gap are measured to be 3.68 ± 0.05 and 0.7 eV, respectively, for the Cr(4)O(10) neutral cluster, as compared to 4.41 ± 0.04 and 1.3 eV for W(4)O(10). A comprehensive search is performed to determine the ground-state structures for M(4)O(10) and M(4)O(10)(-), in terms of geometry and electronic states by carefully examining the calculated relative energies at the DFT, CCSD(T), and CASSCF levels. The ground states of Cr(4)O(10) and Cr(4)O(10)(-) have tetrahedral structures similar to that of P(4)O(10) with the anion having a lower symmetry due to a Jahn-Teller distortion. The ground states of W(4)O(10) and W(4)O(10)(-) have butterfly shape structures, featuring two fused five-member rings with a metal-metal multiple bond between the central metal atoms. The much stronger WW bonding than the CrCr bonding is found to be the primary cause for the different ground state structures of the reduced Cr(4)O(10)(0/-) versus W(4)O(10)(0/-) oxide clusters. The photoelectron spectra are assigned by comparing the experimental and theoretical adiabatic and vertical electron detachment energies, further confirming the determination of the ground electronic states of M(4)O(10) and M(4)O(10)(-). The time-dependent DFT method is used to calculate the excitation energies of M(4)O(10). The TD-DFT results in combination with the self-consistently calculated vertical detachment energies for some of the excited states at the DFT and CCSD(T) levels are used to assign the higher energy bands. Accurate clustering energies and heats of formation of M(4)O(10) are calculated and used to calculate accurate reaction energies for the reduction of M(4)O(12) to M(4)O(10) by CH(3)OH, as well as for the oxidation of M(4)O(10) to M(4)O(12) by O(2). The performance of the DFT method with the B3LYP and BP86 functionals in the calculations of the relative energies, electron detachment energies, and excitation energies are evaluated, and the BP86 functional is found to give superior results for most of these energetic properties.     

Photodissociation of the BrO radical using velocity map ion imaging: excited state dynamics and accurate D0(0)(BrO) evaluation

We have studied the photodissociation dynamics of expansion-cooled BrO radical both above (278-281.5 nm) and below (355 nm) the A (2)Pi(3/2) state threshold using velocity map ion imaging. A recently developed late-mixing flash pyrolytic reactor source was utilized to generate an intense BrO radical molecular beam. The relative electronic product branching ratios at 355 nm and from 278 to 281.5 nm were determined. We have investigated the excited state dynamics based on both the product branching and the photofragment angular distributions. We find that above the O((1)D(2)) threshold the contribution of the direct excitation to states other than the A (2)Pi(3/2) state and the role of curve crossing is considerably larger in BrO compared to that observed for ClO, in agreement with recent theoretical studies. The measurement of low velocity photofragments resulting from photodissociation just above the O((1)D(2)) threshold provides an accurate and direct determination of the A (2)Pi(3/2) state dissociation threshold of 35418+/-35 cm(-1), leading to a ground state bond energy of D(0)(0)(BrO)=55.9+/-0.1 kcal/mol.     

Electronic states of F2CO as studied by electron energy-loss spectroscopy and ab initio calculations

This paper reports on the first measurements of the electron impact electronic excitation cross-sections for carbonyl fluoride, F(2)CO, measured at 30 eV, 10° and 100 eV, 5° scattering angle, while sweeping the energy loss over the range 5.0-18.0 eV. The electronic-state spectroscopy has been investigated and the assignments are supported by quantum chemical calculations. The energy bands above 9.0 eV and the vibrational progressions superimposed upon it have been observed for the first time. Vibronic coupling has been shown to play an important role dictating the nature of the observed excited states, especially for the low-lying energy region (6.0-8.0 eV). New experimental evidence for the 6(1)B(2) state proposed to have its maximum at 12.75 eV according to the vibrational excitation reported in this energy region (11.6-14.0 eV). The n = 3 members of the Rydberg series have been assigned converging to the lowest ionization energy limits, 13.02 eV ((2)B(2)), 14.09 eV ((2)B(1)), 16.10 ((2)B(2)), and 19.15 eV ((2)A(1)) reported for the first time and classified according to the magnitude of the quantum defects (δ).     

Theoretical investigation of molecular properties of the first excited state of the thiophenoxyl radical

Accurate ab initio study of the lowest excited state (A (2)B(2)) of the thiophenoxyl radical is presented. The calculated equilibrium geometries, excitation energies, and harmonic vibrational frequencies show that the A (2)B(2) <-- X (2)B(1) excitation in C(6)H(5)S has different characteristics than the analogous transition in the phenoxyl radical. Vertical excitation energies for other low-lying (<4.5 eV) excited states of the thiophenoxyl radical are also presented and compared with available experimental data.     

Determination of iodine and bromine compounds in foodstuffs by CE-inductively coupled plasma MS

A CE-inductively coupled plasma mass spectrometric (CE-ICP-MS) method for iodine and bromine speciation analysis is described. Samples containing ionic iodine (I(-) and IO(3)(-)) and bromine (Br(-) and BrO(3)(-)) species are subjected to electrophoretic separation before injection into the microconcentric nebulizer (CEI-100). The separation has been achieved in a 50 cm length x 75 microm id fused-silica capillary. The electrophoretic buffer used is 10 mmol/L Tris (pH 8.0), while the applied voltage is set at -8 kV. Detection limits are 1 and 20-50 ng/mL for various I and Br compounds, respectively, based on peak height. The RSD of the peak areas for seven injections of 0.1 microg/mL I(-), IO(3)(-) and 1 microg/mL Br(-), BrO(3)(-) mixture is in the range of 3-5%. This method has been applied to determine various iodine and bromine species in NIST SRM 1573a Tomato Leaves reference material and a salt and seaweed samples obtained locally. A microwave-assisted extraction method is used for the extraction of these compounds. Over 87% of the total iodine and 83% of the total bromine are extracted using a 10% m/v tetramethylammonium hydroxide (TMAH) solution in a focused microwave field within a period of 10 min. The spike recoveries are in the range of 94-105% for all the determinations. The major species of iodine and bromine in tomato leaves, salt, and seaweed are Br(-), IO(3)(-), I(-), and Br(-), respectively.     

Quantum chemical modeling of photoadsorption properties of the nitrogen-vacancy point defect in diamond

Quantum chemical calculations of geometric and electronic structure and vertical transition energies for several low-lying excited states of the neutral and negatively charged nitrogen-vacancy point defect in diamond (NV(0) and NV(-)) have been performed employing various theoretical methods and basis sets and using finite model NC(n)H(m) clusters. Unpaired electrons in the ground doublet state of NV(0) and triplet state of NV(-) are found to be localized mainly on three carbon atoms around the vacancy and the electronic density on the nitrogen and rest of C atoms is only weakly disturbed. The lowest excited states involve different electronic distributions on molecular orbitals localized close to the vacancy and their wave functions exhibit a strong multireference character with significant contributions from diffuse functions. CASSCF calculations underestimate excitation energies for the anionic defect and overestimate those for the neutral system. The inclusion of dynamic electronic correlation at the CASPT2 level leads to a reasonable agreement (within 0.25 eV) of the calculated transition energy to the lowest excited state with experiment for both systems. Several excited states for NV(-) are found in the energy range of 2-3 eV, but only for the 1(3)E and 5(3)E states the excitation probabilities from the ground state are significant, with the first absorption band calculated at approximately 1.9 eV and the second lying 0.8-1 eV higher in energy than the first one. For NV(0), we predict the following order of electronic states: 1(2)E (0.0), 1(2)A(2) (approximately 2.4 eV), 2(2)E (2.7-2.8 eV), 1(2)A(1), 3(2)E (approximately 3.2 eV and higher).     

A combined ab initio and Franck-Condon factor simulation study on the photodetachment spectrum of ScO2(-)

Restricted-spin coupled-cluster single-double plus perturbative triple excitation {RCCSD(T)} potential energy functions (PEFs) of the X(2)B2 state of ScO2 and the 1A1 state of ScO2(-) were computed, employing the augmented correlation-consistent polarized-weighted core-valence quadruple-zeta (aug-cc-pwCVQZ) basis set for Sc and augmented correlation-consistent polarized valence quadruple-zeta (aug-cc-pVQZ) basis set for O, and with the outer core Sc 3s(2)3p(6) electrons being explicitly correlated. Franck-Condon factors, which include allowance for Duschinsky rotation and anharmonicity, were calculated using the computed RCCSD(T) PEFs, and were used to simulate the first photodetachment band of ScO2(-). The simulated spectrum matches well with the corresponding experimental 355 nm photodetachment spectrum of Wu and Wang, J Phys Chem A 1998, 102, 9129, confirming the assignment of the photodetachment spectrum and the reliability of the RCCSD(T) PEFs used. Further calculations on low-lying electronic states of ScO2 gave adiabatic relative electronic energies (T(e)'s) of, and vertical excitation energies (T(v)'s) to, the 2A1, 2B1, and 2A2 states of ScO2 (from the X(2)B2 state of ScO2), as well as electron affinities (EAs) and vertical detachment energies (VDEs) to these neutral states from the 1A1 state of ScO2(-).     

High-resolution absorption spectrum of jet-cooled CH3Cl between 70,000 and 85,000 cm(-1): new assignments

The absorption spectrum of jet-cooled CH(3)Cl was photographed from 165 to 117 nm (or 60,000 - 85,000 cm(-1), 7.5-10.5 eV) at a resolution limit of 0.0008 nm (0.3-0.6 cm(-1) or 0.04-0.08 meV). Even in the best structured region of the spectrum, from 70,000 to 85,000 cm(-1) (8.7-10.5 eV), observed bandwidths (full width at half maximum) are large, from 50 to 150 cm(-1). No rotational feature could be resolved. The spectrum is dominated by two strong bands near 9 eV, 140 nm, the D and E bands of Mulliken [J. Chem. Phys. 8, 382 (1940)] or the spectral region D of Price [J. Chem. Phys.4, 539 (1936)]. Their relative intensity is incompatible with previous assignments, namely, to a triplet and a singlet state belonging to the same configuration. On the basis of the present ab initio calculations, those bands are now assigned to two singlet states, the (1)A(1) and (1)E excited states resulting from the 2e(3)4pe Rydberg configuration. The present calculations also reveal that the two (1)E states issued from 2e(3)4sa(1) and 2e(3)4pa(1) are quasidegenerate and strongly mixed. They should be assigned to the two broad bands near 8 eV, 160 nm, the B and C bands of Mulliken and Price. Three vibrational modes are observed to be active: the CCl bond stretch nu(3)(a(1)), and the CH(3) umbrella and rocking vibrations, respectively, nu(2)(a(1)) and nu(6)(e). The fundamental frequencies deduced are well within the ranges defined by the corresponding values in the neutral and ion ground states. The possibility of a dynamical Jahn-Teller effect induced by the nu(6)(e) vibrational mode in the (1)E Rydberg states is discussed.     

All-boron analogues of aromatic hydrocarbons: B17- and B18-

We have investigated the structural and electronic properties of the B(17)(-) and B(18)(-) clusters using photoelectron spectroscopy (PES) and ab initio calculations. The adiabatic electron detachment energies of B(17)(-) and B(18)(-) are measured to be 4.23 ± 0.02 and 3.53 ± 0.05 eV, respectively. Calculated electron detachment energies are compared with experimental data, confirming the presence of one planar C(2v) ((1)A(1)) isomer for B(17)(-) and two nearly isoenergetic quasi-planar C(3v) ((2)A(1)) and C(s) ((2)A') isomers for B(18)(-). The stability and planarity/quasi-planarity of B(17)(-) and B(18)(-) are ascribed to σ- and π-aromaticity. Chemical bonding analyses reveal that the nature of π-bonding in B(17)(-) and B(18)(-) is similar to that in the recently elucidated B(16)(2-) and B(19)(-) clusters, respectively. The planar B(17)(-) cluster can be considered as an all-boron analogue of naphthalene, whereas the π-bonding in the quasi-planar B(18)(-) is reminiscent of that in coronene.     

The photodissociation of NO(2) by visible and ultraviolet light

We present velocity map images of the NO, O((3)P(J)) and O((1)S(0)) photofragments from NO(2) excited in the range 7.6 to 9.0 eV. The molecule was initially pumped with a visible photon between 2.82-2.95 eV (440-420 nm), below the first dissociation threshold. A second ultraviolet laser with photon energies between 4.77 and 6.05 eV (260-205 nm) was used to pump high-lying excited states of neutral NO(2) and/or probe neutral photoproducts. Analysis of the kinetic energy release spectra revealed that the NO photofragments were predominantly formed in their ground electronic state with little kinetic energy. The O((3)P(J)) and O((1)S(0)) kinetic energy distributions were also dominated by kinetically 'cold' fragments. We discuss the possible excitation schemes and conclude that the unstable photoexcited states probed in the experiment were Rydberg states coupled to dissociative valence states. We compare our results with recent time-resolved studies using similar excitation and probe photon energies.     

Low-lying isomers of the B9(-) boron cluster: the planar molecular wheel versus three-dimensional structures

The B(9)(-) cluster was found previously to be an unprecedented molecular wheel containing an octacoordinate planar boron with D(8h) symmetry in a combined photoelectron spectroscopy (PES) and theoretical study [H. J. Zhai et al., Angew. Chem., Int. Ed. 42, 6004 (2003)]. However, the PES spectra of B(9)(-) exhibit minor features that cannot be explained by the global minimum D(8h) structure, suggesting possible contributions from low-lying isomers at finite temperatures. Here we present Car-Parrinello molecular dynamics with simulated annealing simulations to fully explore the potential energy surface of B(9)(-) and search for low-lying isomers that may account for the minor PES features. We performed density functional theory (DFT) calculations with different exchange-correlation functionals and ab initio calculations at various levels of theory with different basis sets. Two three-dimensional low-lying isomers were found, both of C(s) symmetry, 6.29 (C(s)-2) and 10.23 (C(s)-1) kcal/mol higher in energy than the D(8h) structure at the highest CCSD(T) level of theory. Calculated detachment transitions from the C(s)-2 isomer are in excellent agreement with the minor features observed in the PES spectra of B(9)(-). The B(9)(-) cluster proves to be a challenge for most DFT methods and the calculated relative energies strongly depend on the exchange-correlation functionals, providing an excellent example for evaluating the accuracies of various DFT methods.     

Electronic states of thiophenyl and furanyl radicals and dissociation energy of thiophene via photoelectron imaging of negative ions

We report photoelectron images and spectra of deprotonated thiophene, C(4)H(3)S(-), obtained at 266, 355, and 390 nm. Photodetachment of the α isomer of the anion is observed, and the photoelectron bands are assigned to the ground X(2)A(') (σ) and excited A(2)A(") and B(2)A(") (π) states of the thiophenyl radical. The photoelectron angular distributions are consistent with photodetachment from the respective in-plane (σ) and out-of-plane (π(?)) orbitals. The adiabatic electron affinity of α-(●)C(4)H(3)S is determined to be 2.05 ± 0.08 eV, while the B(2)A(") term energy is estimated at 1.6 ± 0.1 eV. Using the measured electron affinity and the electron affinity/acidity thermodynamic cycle, the C-H(α) bond dissociation energy of thiophene is calculated as DH(298)(H(α)-C(4)H(3)S) = 115 ± 3 kcal/mol. Comparison of this value to other, previously reported C-H bond dissociation energies, in particular for benzene and furan, sheds light of the relative thermodynamic stabilities of the corresponding radicals. In addition, the 266 nm photoelectron image and spectrum of the furanide anion, C(4)H(3)O(-), reveal a previously unobserved vibrationally resolved band, assigned to the B(2)A(") excited state of the furanyl radical, (●)C(4)H(3)O. The observed band origin corresponds to a 2.53 ± 0.01 eV B(2)A(") term energy, while the resolved vibrational progression (853 ± 42 cm(-1)) is assigned to an in-plane ring mode of α-(●)C(4)H(3)O (B(2)A(")).     

Density functional theory and multireference configuration interaction studies on low-lying excited states of TiO2

Using density functional theory at the BPW916-311+G(3df) level, optimized geometries and energies of the lowest singlet, triplet, and quintet A(1), A(2), B(1), B(2)(C(2v)) states of the TiO(2) molecule were obtained. TiO(2) has a (1)A(1) ground state in C(2v) symmetry. Adiabatic excitation energies of the low-lying singlet and triplet states range from 2.1 to 3.0 eV. The (1,3)A(2) states optimize at bond angles of about 140 degrees , lying only 0.06 eV below linear (1,3)Delta(u), whereas (1,3)B(1) and (1,3)B(2), with bond angles of 120 degrees and 96 degrees , respectively, lie 0.3-0.4 eV below the respective (1,3)Pi(u) or (1,3)Delta(u) states. Minima with short O-O distances of approximately 1.46 A, at energies of 4.2 and 4.7 eV, were found for (1)A(1) and (3)A(1). The C(2v) minima of the lowest (1)B(1) and (3)B(1) states are saddle points, suggesting lower-energy structures in C(s) symmetry. The C(2v) quintet states start at energies of 5.7 eV. Multireference configuration interaction (MRCI) methods, employing a polarized valence triple-zeta basis set, lead to similar geometries and energies. MRCI vertical excitation energies up to 4.6 eV and oscillator strengths are given. The calculated excitation energy of 2.2 eV for (1)B(2) agrees well with 2.3 eV from a fluorescence spectrum. The vertical electron detachment energy of TiO(2) (-) is 1.5 eV, in good agreement with 1.6 eV from anion photoelectron spectroscopy. An observed second photoelectron band corresponds to (1)B(2) and/or (3)B(2), but the assignment of a third band could not be verified. Vibrational frequencies, ionization energies, electron affinities, and dissociation energies are given.     

On the electronic structures and electron affinities of the m-benzoquinone (BQ) diradical and the o-, p-BQ molecules: a synergetic photoelectron spectroscopic and theoretical study

Electron affinity (EA) is an important molecular property relevant to the electronic structure, chemical reactivity, and stability of a molecule. A detailed understanding of the electronic structures and EAs of benzoquinone (BQ) molecules can help rationalize their critical roles in a wide range of applications, from biological photosynthesis to energy conversion processes. In this Article, we report a systematic spectroscopic probe on the electronic structures and EAs of all three isomers-o-, m-, and p-BQ-employing photodetachment photoelectron spectroscopy (PES) and ab initio electronic structure calculations. The PES spectra of the three BQ(●-) radical anions were taken at several photon energies under low-temperature conditions. Similar spectral patterns were observed for both o- and p-BQ(●-), each revealing a broad ground-state feature and a large band gap followed by well-resolved excited states peaks. The EAs of o- and p-BQ were determined to be 1.90 and 1.85 eV with singlet-triplet band gaps of 1.68 and 2.32 eV, respectively. In contrast, the spectrum of m-BQ(●-) is distinctly different from its two congeners with no clear band gap and a much higher EA (2.89 eV). Accompanied theoretical study confirms the experimental EAs and band gaps. The calculations further unravel a triplet ground state for m-BQ in contrast to the singlet ground states for both o- and p-BQ. The diradical nature of m-BQ, which is consistent with its non-Kekule? structure, is primarily responsible for the observed high EA and helps explain its nonexistence in bulk materials.     

MX3(-) superhalogens (M = Be, Mg, Ca; X = Cl, Br): a photoelectron spectroscopic and ab initio theoretical study

Gas-phase alkaline earth halide anions, MgX3(-) and CaX3(-) (X = Cl, Br), were produced using electrospray and investigated using photoelectron spectroscopy at 157 nm. Extremely high electron binding energies were observed for all species and their first vertical detachment energies were measured as 6.60 +/- 0.04 eV for MgCl3(-), 6.00 +/- 0.04 eV for MgBr3(-), 6.62 +/- 0.04 eV for CaCl3(-), and 6.10 +/- 0.04 eV for CaBr3(-). The high electron binding energies indicate these are very stable anions and they belong to a class of anions, called superhalogens. Theoretical calculations at several levels of theory were carried out on these species, as well as the analogous BeX3(-). Vertical detachment energy spectra were predicted to compare with the experimental observations, and good agreement was obtained for all species. The first adiabatic detachment energies were found to be substantially lower (by about 1 eV) than the corresponding vertical detachment energies for all the MX3(-) species, indicating extremely large geometry changes between MX3(-) and MX3. We found that all the MX3(-) anions possess D3h ((1)A1') structures and are extremely stable against dissociation into MX2 and X-. The corresponding neutral species MX3, however, were found to be only weakly bound with respect to dissociation toward MX2 + X. The global minimum structures of all the MX3 neutrals were found to be C2v ((2)B2), which can be described as (X2(-))(MX+) charge-transfer complexes, whereas the MX2...X (C2v, (2)B1) van der Waals complexes were shown to be low-lying isomers.     

Theoretical investigation of excited states of C(3)

In this work, we present ab initio calculations for the potential energy surfaces of C(3) in different electronic configurations, including the singlet ground state [X (1)Sigma(g) (+),((1)A(1))], the triplet ground state [a (3)Pi(u),((3)B(1), (3)A(1))], and some higher excited states. The geometries studied include triangular shapes with two identical bond lengths, but different bond angles between them. For the singlet and triplet ground states in the linear geometry, the total energies resulting from the mixed density functional--Hartree-Fock and quadratic configuration interaction methods reproduce the experimental values, i.e., the triplet occurs 2.1 eV above the singlet. In the geometry of an equilateral triangle, we find a low-lying triplet state with an energy of only 0.8 eV above the energy of the singlet in the linear configuration, so that the triangular geometry yields the lowest excited state of C(3). For the higher excited states up to about 8 eV above the ground state, we apply time-dependent density functional theory. Even though the systematic error produced by this approach is of the order of 0.4 eV, the results give different prospective to insight into the potential energy landscape for higher excitation energies.