NaCl-NaBr系熔盐溶液的分子动力学研究

近年来，用计算机模拟馆公的结构和性质的研究已有较大进展[1，2]．但研究工作多集中在有阴离子相同、阳离子不同的盐组成的“同阴离子系”（commonanionsystems），而对由阳离子相同、阴离子不同的盐组成的“同阳离子系”（commoncationsystems）熔盐溶液则甚少研究．鉴于自然界和生产中同阳离子系也不乏实例，建立同阳离子系熔盐溶液的理论屯有必要．为止匕我们先选择NaCI－NaBr系熔盐溶液（同阳离子系的一个最简单的典型）为对象，开展分子动力学方法计算机模拟研究．1模型和计算方法采用标准文献中的计算模拟和方法，离子间劳用Fumi-…     

NaF-LiCl-BaCl_2系相图的研究

用目测变温法、差热分析法及X射线粉末法,研究了NaF-LiCl-BaCl_2熔盐系相图,并讨论了体系的初晶化合物。 1 实验部分 本实验所用NaF、LiCl均为分析纯的无水盐,烘干后使用。氯化钡为分析纯BaCl_2·_2H_2O,经脱水烘干后制得。测温用Pt-PtRh热电偶直接插入熔盐溶液之中,     

LiF-KCl熔盐溶液的Monte Carlo法计算机模拟研究 II: 熔体结构与物性的关系

本文用Monte Carlo法对互易盐系LiF-KCl熔盐溶液的局部结构作了计算机模拟。计算了该熔盐溶液的总势能和势能分布。在1200K模拟温度下, 该熔盐溶液中大部份离子组成各种形式的离子团。根据模拟的互易盐系熔盐溶液模型, 讨论了熔体局部结构和物性之间的关系。     

LiF-KCl熔盐溶液的Monte Carlo法计算机模拟研究——Ⅱ.熔体结构与物性的关系

本文用Monte Carlo法对互易盐系LiF-KCl熔盐溶液的局部结构作了计算机模拟。计算了该熔盐溶液的总势能和势能分布。在1200K模拟温度下,该熔盐溶液中大部分离子组成各种形式的离子团。根据模拟的互易盐系熔盐溶液模型,讨论了熔体局部结构和物性之间的关系。     

电动势法测定CuCl-NaCl系的活度

研究熔盐溶液热力学性质的方法有:电动势测定法、凝固点降低法、蒸气压测定法、量热法和化学平衡法。用得较广泛的是电动势测定法。通常是采用测定下面生成盐型原电池的电动势来进行。     

ZnCI~2-KCI系溶液的分子动力学模拟

用Busing离子间势,对ZnCI~2-KCI 系熔盐液的结构作分子动力学计算机模拟研究,模拟结果与中子衍射,X射线衍射,Raman光谱和红外光谱的若干结构相符.     

ZnCI~2-KCI系溶液的分子动力学模拟

用Busing离子间势,对ZnCI~2-KCI 系熔盐液的结构作分子动力学计算机模拟研究,模拟结果与中子衍射,X射线衍射,Raman光谱和红外光谱的若干结构相符.     

制备方法对LaFeO3纳米粉体的影响

分别采用熔盐法和溶液燃烧法合成了钙钛矿型LaFeO3纳米粉体,系统研究了两种制备方法对粉体相结构、形貌的影响,用XRD、SEM和TG/DSC对纳米粉体进行了表征.结果表明:熔盐体系、煅烧温度、燃料类型和燃料/氧化剂的摩尔比对合成LaFeO3有重要的影响.450-750℃的熔盐NaNO2体系及650-800℃的熔盐NaN...     

LiF-KF熔盐溶液局部结构的计算机模拟研究

本文用Monte Carlo法对同离子系LiF-KF熔盐溶液的局部结构进行了计算机模拟,介绍了计算方法和模型。计算了LiF, KF及Lif-KF混合前后正-正离子, 正-负离子, 负-负离子间位能变化, 各类离子的近邻离子排布规律, 以及各种形式离子团的组成比例。本文还讨论了在熔盐瞬时结构中存在的静电场的微区涨落。     

LiF-KCl熔盐溶液的Monte Carlo法计算机模拟研究——Ⅰ.径向分布函数和热力学性质

本文用Monte Carlo法对互易盐系LiF—KCl熔盐溶液的结构和性质进行了计算机模拟。计算了各离子的偏径向分布函数和摩尔容积、热焓、混合热等热力学性质。若干计算结果与实测值大体相符,计算表明:LiF—KCl熔盐混合后,Li~+,F~-离子间平均距离显著减小,熔体内自由体积作不均匀分布。本文还讨论了这一结构特点的成因和意义。     

The Coordination Chemistry of f-Block Elements in Molten Salts

The coordination chemistry of f-block elements (lanthanide and actinide) in molten salts has become a resounding topic in view of its great importance to the research and development (R&D) of molten salt reactors and pyroprocessing. In this Review article, a general overview of the coordination chemistry of f-block elements in molten salts is provided including past achievements and recent advances. Particular emphases are placed on the oxidation state, speciation, and solution structure of f-block metal ions in molten salts, as well as their relationships with the salt composition. Furthermore, this review briefly discusses the spectroscopic and theoretical methods that complement each other in revealing the coordination properties.     

熔盐中熟化处理提高BiFeO3的可见光催化活性

研究发现, 通过熔盐中熟化处理可以显著地提高BiFeO3的可见光催化活性.     

Cyclic voltammetry of ion transfer across the polarized interface between the organic molten salt and the aqueous solution

A molten salt, or ionic liquid, composed of tetrahexylammonium bis(perfluoroethylsulfonyl)imide forms with an aqueous solution a polarized interface where the phase-boundary potential can be controlled externally. The available potential window of about 300 mV at 40 °C enables us to apply various electrochemical techniques for studying the structure and charge transfer reactions at the molten salt–water interface. Cyclic voltammetry of the transfer of moderately hydrophobic ions, such as 1-octyl-3-methylimidazolium and hexafluorophosphate ions, across the interface exemplifies the potentiality of this new electrochemical interface. This new type of polarized interface would facilitates electrochemical studies of molten salt–water two-phase systems that have been studied as an environmentally benign alternative of organic solvent–water two-phase systems for liquid–liquid extraction and two-phase organic synthesis.     

A radioactive tracer dilution method to determine the mass of molten salt

A new technique for molten salt mass determination, termed radioactive tracer dilution, that uses ²²Na as a tracer was validated at bench scale. It has been a challenging problem to determine the mass of molten salt in irregularly shaped containers, where a highly radioactive, high-temperature molten salt was used to process nuclear spent/used fuel during electrochemical recycling (pyro-processing) or for coolant/fuel salt from molten salt reactors. A radioactive source with known activity is dissolved into the salt. After a complete mixture, a small amount of the salt is sampled and measured in terms of its mass and radioactivity. By finding the ratio of the mass to radioactivity, the unknown salt mass in the original container can be precisely determined.

     

锕系元素在熔盐体系中的电化学及萃取特性研究进展

熔融盐是一类非水溶剂,分为高温熔盐、室温熔盐和低温熔盐。 作为反应介质和电解介质,因其优良性能,可以溶解很多难溶于水的活泼金属。 近年来,该领域的研究热点是将熔盐作为干法后处理的电解质分离和回收锕系元素。 本文综述了锕系元素在高温熔盐中的电化学行为、热力学等物理特性,介绍了近几年室温离子液体(RTILs)的研究进展及锕系元素在RTILs中萃取特性的最新研究成果,展望了熔盐体系未来的研究方向。     

Inorganic Molten Salts as Solvents for Cellulose

Inorganic molten salts can be used as efficient solvents for cellulose in a wide range of degrees of polymerization. Furthermore, molten salts can be applied as reaction medium for the derivatization of cellulose. For both dissolution and derivatization of cellulose, knowledge of the solution state as well as information about chemical interactions with the solvent system is essential. Using the melts of LiClO₄·3H₂O, NaSCN/KSCN/LiSCN·2H₂O and LiCl/ZnCl₂/H₂O as cellulose solvents, factors which determine the dissolving ability will be discussed. Besides the specific structure of the molten salt hydrate, the cation and the water content of the melt are the most important factors for the dissolving capability of a molten salt hydrate system. FT-Raman spectroscopy, ⁷Li and ¹³C NMR spectroscopy were applied to describe solvent–cellulose interactions and the state of cellulose dissolved in the molten salts. Using Raman and solid state NMR spectroscopy it was proved that cellulose is amorphous in the frozen solvent system. The application of inorganic molten salts as a medium for cellulose functionalization is demonstrated for cellulose carboxymethylation and acetylation.     

In-situ synthesis of nanoparticles via supersolubilizing micelle self-assembly

In-situ synthesis of nano-particles using the self-assembly of molten salt and super soluble micellae was proposed based on a phenomenon of super solubilization of molten salt in reverse micellae and its self-assembly when the concentration reached up to 95%(w/w).The mechanism of the self-assembly indicates that the self-assembly of molten salt occurs in a reverse micelle where a homogenous phase is established between 5%(w/w)of a surfactant with a VB value of less than 1 and a hydrocarbon spe- cies.This synthesis has some unique features,such as being free of water,highly effective deposition and narrow distribution of particle size.     

温和条件下甲烷在熔盐介质中的催化转化

利用硝酸根-硝酸钾(摩尔比0.62:0.38)的熔盐体系作反应介质,以CeO~2,Ce(SO~4)~2,Cu(CF~3CO~2)~2,Co(CF~3CO~2)等为催化剂,在160℃和6.0MPa条件下甲烷被氧化成丙酮和/或三氟醋酸甲酯。甲烷的氯化则可在含氯化铜的氯化铝-氯化钠(摩尔比1:1)的熔盐介质中进行,硫酸银的引入可提高甲烷转化率和一氯甲烷的选择性。     

熔盐电化学创新研究——武汉大学电化学研究中心熔盐电化学研究工作简介

简要介绍近3年武汉大学电化学研究中心在熔盐电化学方面的若干研究进展:1)熔盐电解固态化合物制备单质硅及其合金以及无机功能材料;2)适于高温熔盐的全密封长寿命Ag/AgCl参比电极和可负载微量粉末的金属腔(坑)工作电极新技术;3)“三相界线电化学”新概念以及描述三相界线在薄层固态化合物电解还原过程中扩展变化的薄层模型.