聚-4-偶氮磺酸基苯乙烯与四-(三甲氨基苯基)-卟啉的自组装膜及其光电转换性能

聚-4-重氮基苯乙烯(PDS)在碱性水溶液下通过与Na₂SO₃反应,制备了聚-4-偶氮磺酸基苯乙烯(PDSS).作为负离子聚电解质PDSS能与四-(三甲氨基苯基)-卟啉(TTMAP)通过离子相互作用进行层-层自组装.光照下该组装膜中的离子键转变为共价键,结果是组装膜对极性溶剂和盐水溶液变为非常稳定,从而能直接在KCl水溶液中测定其光电流.结果表明,该组装膜具有良好的光电转换性质.     

基于聚多巴胺/铜微粒自组装多层膜的无酶葡萄糖传感器

利用多巴胺易于在电极表面发生自聚反应,且聚多巴胺膜中富含邻苯二酚等反应性基团,可通过二次反应实现电极表面的进一步功能化修饰的特点,在玻碳电极(GCE)表面,将多巴胺自聚膜(PDA)与铜微粒(Cu)进行层-层自组装,构建了无酶葡萄糖电化学传感器(GCE/(PDA/ Cu) n )。传感器的灵敏度可通过控制多层膜的组装层数进行调控。采用紫外-可见光谱跟踪表征了多层膜的组装过程,结果表明,多层膜的生长是逐步且均匀的过程。采用循环伏安法和电流-时间曲线法研究了修饰电极对葡萄糖的电催化氧化性能。对于GCE/(PDA/ Cu)4,检测葡萄糖的线性范围为0.5~9.0 mmol/ L,检出限为5.8μmol/ L(S/ N=3)。本传感器具有良好的重现性、稳定性和较强的抗干扰能力。将本传感器用于血清中葡萄糖的测定,结果令人满意。     

预混合自组装辣根过氧化物酶生物活性膜及其催化活性研究

以阳离子化的辣根过氧化物酶 (HRP)和阴离子聚苯乙烯磺酸钠 (PSS)的预混合溶液 ,与阳离子聚电解质聚二甲基二烯丙基氯化铵 (PDDA)通过逐层组装 ,在阴离子化聚对苯二酸乙二酯 (PET)表面构建了多层生物活性膜 .用紫外 可见光谱仪 (UV Vis)和原子力显微镜 (AFM)研究了交替自组装膜的结构和表面形膜 ,并测定了自组装膜的生物催化活性 .结果表明 ,预混合溶液中的PSS与HRP一起沉积在PDDA膜层上组装成 (PSS+HRP)膜层 ,且每层中PSS和HRP的比例一致 ;(PSS +HRP)膜层呈条状分布 ,膜表面较为平整 ;多层膜中的HRP催化H2 O2 与 4 氨基安替比林的显色反应的表观米氏常数为 9 7× 10 - 5mol·L- 1 (相对于H2 O2 底物 ) ,较溶液中 (1 5 2× 10 - 4mol·L- 1 )的小 .     

自掺杂基团对聚苯胺自组装膜电化学性能的影响

基于离子相互作用,实现了以聚苯胺(PANI)为聚阳离子,以聚(邻氨基苯甲酸)(PCAN)、聚(邻氨基苯磺酸)(PSAN)为聚阴离子的层-层自组装,形成层厚均匀的全共轭超薄功能膜.由于磺酸基—SO3-的电负性高于—COO-,使得PANI-PSAN自组装膜沉积量小于PANI-PCAN;电化学实验结果显示,由于PCAN和PSAN的导电性均弱于PANI,所以两种自组装膜的电化学性能取决于PANI,但同时受到羧酸、磺酸基团的较大影响,使得PANI-PCAN自组装膜的电化学性能要优于PANI-PSAN.     

旋光聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸]的合成及静电自组装

以聚(乙烯-alt-马来酸酐)为原料,通过与R-(+)-α-苯乙胺的酰胺化反应,合成了一种新型的旋光聚电解质聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸],利用红外吸收光谱、紫外吸收光谱、核磁共振氢谱和旋光度数据对其结构进行表征.聚[乙烯-alt-R-N-(1-苯乙基)马来酰胺酸]与聚二甲基二烯丙基氯化铵(PDDA)逐层静电自组装过程的紫外跟踪测试结果表明,带相反电荷的聚电解质间能够形成稳定增长的自组装膜,多层膜组装量随双层数指数增大.     

酚醛型重氮树脂复合物及自组装超薄膜的制备与应用

不同的高分子链之间可通过次价键而聚集,形成高分子复合物(polymer-polymer omplex).其中,研究最为深入的是基于库仑力的聚电解质复合物(polyelectrolyer complex,PEC)近年来一种继L-B膜技术之后,被称为"层-层”自组装(1ayer-by-layer self-assembly)的技术受到了越来越多的关注自组装技术所组装的分子大多是聚电解质,通常是将带不同电荷的聚电解质分子在水溶剂中交替地组装到片基上,实际上就是在固液界面一层一层地形成聚电解质复合物通过其它弱相互作用如氢键、电荷转移等高分子的自组装基本类似.因此可以说,对高分子自组装的研究基本上是对高分子复合物研究的延伸本论文对重氮树脂-酚醛树脂的感光性复合物以及基于重氮树脂的"层-层”自组装多层膜进行了研究,主要结果如下: 2001年6月通过博士论文答辩     

不同pH条件下木质素磺酸钠的静电逐层自组装研究

以来源于造纸废液中的木质素磺酸钠(SL)为研究对象,利用静电逐层自组装技术,与聚二烯丙基二甲基氯化铵(PDAC)交替吸附,制备木质素磺酸钠的自组装多层吸附膜.研究了不同pH值条件下木质素磺酸钠在固体表面的静电吸附规律.木质素磺酸钠的自组装过程用紫外-可见光吸收光谱来监控,而自组装膜的表面形貌用原子力显微镜来观察.研究表明,SL与PDAC多层吸附膜的紫外-可见光吸收光谱强度随层数增加而线性增长,说明SL/PDAC多层吸附膜的厚度增长是以逐层自组装的方式进行的.木质素磺酸钠浸渍溶液的pH值对多层吸附膜的厚度和表面形貌产生重要的影响.在所研究的pH范围内,pH值越低,越有利于生成吸光度高的自组装膜,而得到的自组装膜的表面粗糙度越大。     

聚电解质PDDA/PSS层层自组装膜的渗透汽化性能

采用聚电解质层层自组装(LbL)技术, 在不同盐浓度下制备了聚(二烯丙基二甲基氯化铵)/聚苯乙烯磺酸钠(PDDA/PSS) 多层自组装膜, 并用于渗透汽化性能的研究. 重点考察了组装溶液中NaCl的浓度、组装层数及操作温度对自组装膜的异丙醇脱水性能的影响. 同时, 用扫描电镜观测了不同条件下制备膜的表面形貌. 结果表明, 在高NaCl含量的聚电解质溶液中只需组装几个双层的LbL膜, 即能获得较高的分离因子和较大的通量, 并解释了该LbL膜呈现反“trade-off”现象的原因.     

PDDA/SnTsPc静电自组装膜的制备及其形态研究

采用静电层-层自组装技术制备出了含有阴离子磺化酞菁锡(SnTsPc)和阳离子聚二烯丙基二甲基胺盐酸盐(PDDA)交替复合超薄膜.利用紫外-可见光谱表征了PDDA/SnTsPc多层膜的组装过程,表明薄膜的吸收是连续的、有规律的.原子力结果表明,膜表面是光滑的、均匀的;在膜表面紧密堆积的纳米粒子的平均粒径为53.1 nm,平均表面粗糙度是4.021 nm.     

高分子化8-羟基喹啉锂的合成与静电自组装研究

设计合成了甲基丙烯酸二甲氨基乙酯(DM)含量为9.69%的丙烯酸甲酯共聚物(CPA),将制得的5-氯甲基-8-羟基喹啉(CHQ)挂接到CPA上,得到季铵型高分子化8-羟基喹啉(CPA-HQ)后,与金属离子Li+配位得到CPA-HQ-Li.化合物结构通过红外、紫外和荧光光谱等表征.多层超薄膜用CPA-HQ-Li和聚阴离子电解质(全氟磺酸)通过静电自组装制得.自组装膜的紫外和荧光相对于溶液(溶剂为四氢呋喃)发生了红移,膜的紫外吸收强度随组装膜层数增加线性增大,荧光强度随膜层数增加线性递减.高分子化8-羟基喹啉锂溶液和自组装膜的紫外和荧光光谱与文献报道一致.实验结果表明这种材料可用于有机电致发光器件(OLEDs)的制备.     

溶剂对SEBS/PMMA共混物薄膜形态的影响

采用原子力显微镜研究了聚（苯乙烯嵌-乙烯／丁烯嵌-苯乙烯）（SEBS）和聚甲基丙烯酸甲酯（PMMA）共混物不同溶剂旋转涂膜的表面形态和相分离行为。结果表明,用共混物的氯仿溶液旋转涂膜,可见明显的共混物的宏观相分离和SEBS的微观相分离形态。改变选择性溶剂可使旋涂膜具有不同的均匀度和形态结构,其相区的尺寸和形状相差甚大,有海岛型、网状、双连续状结构。AFM显示用环己烷／丁酮混合溶剂旋转涂膜,共混物的相分离最为彻底;用选择性溶剂氯仿时次之,但有明显的相分离;对SEBS和PMMA均无选择性的单一溶剂或混合溶剂则无明显相分离。     

高分子共混物薄膜表面形貌形成过程中的溶剂效应

采用原子力显微镜观测了由四氢呋喃和2-丁酮分别作为共溶剂制备得到的聚苯乙烯/聚甲基丙烯酸甲酯(PS/PMMA)共混物薄膜的表面形貌.研究发现,溶剂效应对共混物薄膜的表面形貌有较大影响,表面形貌中凸起与凹坑的组分分布是由溶剂效应决定的,与组分比无关.溶剂对不同组分的溶解能力不同还可以导致薄膜表面相逆转点的偏移.     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Characterization of layer-by-layer self-assembled multilayer films of diblock copolymer micelles

The in situ layer-by-layer (LbL) self-assembly of low Tg diblock copolymer micelles onto a flat silica substrate is reported. The copolymers used here were a cationic poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate) (50qPDMA-PDEA; 50q refers to a mean degree of quaternization of 50 mol % for the PDMA block) and zwitterionic poly(methacrylic acid)-block-poly(2-(diethylamino)ethyl methacrylate) (PMAA-PDEA), which has anionic character at pH 9. Alternate deposition of micelles formed by these two copolymers onto a silica substrate at pH 9 was examined. The in situ LbL buildup of the copolymer micelle films was monitored using zeta potential measurements, optical reflectometry, and a quartz crystal microbalance with dissipation monitoring (QCM-D). For a six layer deposition, complete charge reversal was observed after the addition of each layer. The OR data indicated clearly an increase in adsorbed mass with each additional micelle layer and suggest that some interdiffusion of copolymer chains between layers and/or an increase in the film roughness, and hence in the effective surface area of the micellar multilayers, must take place as the film is built up. QCM-D data indicated that the self-assembled micellar multilayers on a flat silica substrate undergo structural changes over a prolonged period. This is attributed to longer-term interdiffusion of the copolymer chains between the outer two layers after the initial adsorption of each layer is complete. The QCM-D data further suggest that the outer adsorbed layers adopt a progressively more extended conformation, particularly for the higher numbered layers. The morphology of each successive layer was characterized using in situ soft-contact atomic force microscopy, and micelle-like surface aggregates are clearly observed within each layer of the complex film, suggesting the persistence of aggregate structures throughout the multilayer structure.     

含氟嵌段共聚物离聚体的合成表征及其性能研究

嵌段共聚物离聚体具有独特的形态和固体及溶液性质 ,在热塑性弹性体、极性材料与非极性材料共混相溶剂和粘度调节剂等领域具有十分广阔的应用前景 ,引起了人们的普遍关注 .文献报道较多的是聚苯乙烯 乙烯 丙烯[1] 、聚苯乙烯 乙烯 丁烯 苯乙烯[2 ] 、聚苯乙烯 异丁烯 苯乙烯[3 ] 等共聚物中 ,聚苯乙烯链段部分磺化后所得离聚体的合成与性质研究 .众所周知 ,含氟聚合物具有低表面能和高表面活性等特性 ,因而将含氟基团引入到嵌段共聚物离聚体中有望开发出一种新型的特殊功能材料 .原子转移自由基聚合 (ATRP)自 1 995年问世以来 ,已成功…     

聚合物层状组装膜

介绍了近几年来我们研究组在层状组装膜的构筑以及功能化研究方面取得的一些最新进展.包括结合表面溶胶-凝胶技术与静电层状组装技术,实现了二阶非线性基团在层状组装多层膜中的非对称排列,制备了具有二阶非线性效应的膜材料;采用室温压印技术,发展了一种简便、经济和具有普适性的层状组装聚合物膜图案化方法;以轻度交联的聚合物微凝胶为构筑基元,制备了具有高负载量的聚合物层状组装膜;发展了一种基于离子剥离技术的层状组装自支持膜制备方法;基于层状组装技术,制备了具有超疏水和抗反射功能的涂层.     

Preparation and properties of cross-linked fluorescent poly(methyl methacrylate) latex colloids

We report a single step preparation of monodisperse fluorescent poly(methyl)methacrylate (PMMA) lattices cross-linked with ethylene glycol dimethacrylate with radii in the range 150-1000 nm using dispersion polymerization. The particles are applied as fluorescent cores in core-shell PMMA particles for confocal microscopy (Dullens et al. Langmuir 2003, 19, 5963). Contrary to un-cross-linked particles, these cross-linked colloids are stable in good solvents for PMMA as well. Therefore we studied the properties of the cross-linked PMMA particles in the good solvents tetrahydrofuran (THF), chloroform, and toluene using light scattering and confocal scanning laser microscopy. We show that the particles swell instantaneously and that their volume can increase up to more than seven times their volume in poor solvents. Further, it is very likely that the particles are charged in THF.     

Synthesis and characterization of polymeric linseed oil grafted methyl methacrylate or styrene

Syntheses of wholly natural polymeric linseed oil (PLO) containing peroxide groups have been reported. Peroxidation, epoxidation and/or perepoxidation reactions of linseed oil, either under air or under oxygen flow at room temperature, resulted in polymeric peroxides, PLO-air and PLO-ofl, containing 1.3 and 3.5 wt.-% of peroxide, with molecular weights of 2 100 and 3 780 Da, respectively. PLO-air contained cross-linked film up to 46.1 wt.-% after a reaction time of 60 d, associated with a waxy, soluble part (PLO-air-s) that was isolated with chloroform extraction. PLO-ofl was obtained as a waxy, viscous liquid without any cross-linked part at the end of 24 d under visible irradiation and oxygen flow. Polymeric peroxides, PLO-air-s and PLO-ofl initiated the free radical polymerization of both methyl methacrylate (MMA) and styrene (S) to give PMMA-graft-PLO and PS-graft-PLO graft copolymers in high yields with Mw varying from 37 to 470 kDa. The polymers obtained were characterized by FT-IR, (1)H NMR, TGA, DSC and GPC techniques. Cross-linked polymers were also studied by means of swelling measurements. PMMA-graft-PLO graft copolymer film samples were also used in cell-culture studies. Fibroblast cells were well adhered and proliferated on the copolymer film surfaces, which is important in tissue engineering.     

酶促聚合和原子转移自由基聚合“一锅法”合成嵌段聚合物及其性能表征

用酶促聚合和原子转移自由基聚合相结合的"一锅法"合成了聚甲基丙烯酸正丁酯嵌段聚10-羟基癸酸[PBMA-b-P(10-HD)],通过核磁共振(1H NMR)、傅里叶红外光谱(FTIR)和凝胶渗透色谱(GPC)对其结构以及分子量与其分子量分布进行了表征,并通过动态光散射仪(DLS)和原子力显微镜(AFM)对聚合物在水溶液中的性质进行了研究.所得嵌段聚合物纳米粒子呈球形结构,平均直径为135 nm左右.     

Robust ion-permselective multilayer films prepared by photolysis of polyelectrolyte multilayers containing photo-cross-linkable and photolabile groups

The azobenzene-containing polyanion PAC-azoBNS was alternately assembled with the polycation diazoresin (DAR) to construct photo-cross-linkable multilayer films of PAC-azoBNS/DAR that contain photolabile groups of azobenzene. Upon mild UV irradiation, the interaction between PAC-azoBNS/DAR multilayers was converted from electrostatic interaction to covalent bonds. Because of the free carboxylic acid groups presented in the film, the photo-cross-linked multilayer film favors the selective permeation of positively charged species. After photolysis of the photo-cross-linked PAC-azoBNS/DAR films with intense UV irradiation, azobenzene groups decompose to produce imine groups, and a photo-cross-linked robust film containing free carboxylic acid and imine groups was fabricated. The resultant film allows the permeation of negatively charged species and meanwhile shows a pH-switchable permselectivity for positively charged species. Because of the covalently cross-linking structure, the photolyzed cross-linked PAC-azoBNS/DAR film shows high reversible switching behavior and has high stability in solution with high ionic strength.