含膦酰杂菲侧基聚乙炔的合成与热稳定性

以2-(6-氧化-6-氢-二苯基(c,e)<1,2>氧杂磷酰基)-1,4-二羟基苯(ODOPB)结构单元为中心,在两侧通过酯化反应分别引入4-乙炔基苯甲酰基和4-烷氧基苯甲酰基,并作为乙炔单体,在[Rh(nbd)Cl]2催化下,30℃聚合得到了含磷酰杂菲(DOPO)基团的聚乙炔.1H-NMR和GPC分析表明,由于DOPO存在较大π共轭结构和较强极性效应,在诱导聚乙炔主链采取高反式构型的同时,增加了分子链内相邻侧基之间的相互作用,使整个分子链趋向二维共平面结构,有利于增强分子链之间的相互作用.TGA显示,与不含磷酰杂菲侧基的模型聚乙炔相比,DOPO的引入使聚乙炔呈现良好的热稳定性,起始热分解温度(T5%)接近400℃,说明通过增强分子链内侧基间相互作用有助于提高热稳定性.     

铑催化剂的制备及其催化取代苯乙炔不对称聚合研究

以1,5-环辛二烯(cod)和2,5-降冰片二烯(nbd)为配体,合成了[Rh(cod)Cl]_2和[Rh(nbd)Cl]_2两种铑催化剂,利用红外吸收光谱、核磁共振对其进行测试表征,准确确定其结构,且[Rh(nbd)Cl]_2的收率高达79.4%。再用四种手性氨作为助催化剂和[Rh(cod)Cl]_2或[Rh(nbd)Cl]_2形成催化体系催化含十二烷基的取代苯乙炔单体(1)聚合,聚合物重均分子量最高达49.39万,按照螺旋选择聚合机理诱起了聚合物主链上的螺旋结构;此外,首次在无助催化剂的作用下,用[Rh(nbd)Cl]_2催化含有L-丙氨醚、L-缬氨醚、L-苯丙氨醚取代基的苯乙炔单体(2、3、4)进行不对称聚合,三种聚合物产率高且分子量大,通过自配位螺旋选择聚合诱起三大分子主链上的螺旋结构,所得聚合物Poly(2)、Poly(3)、Poly(4)的主链顺式构型所占百分比分别为70%、77%、77%,因此取得了比较理想的催化效果。     

含磷酰杂菲侧基聚苯乙烯的合成及其荧光性质

以2-(6-氧化-6-氢-二苯基(c,e)1,2氧杂磷酰基)-1,4-二羟基苯(ODOPB)结构单元为中心,在两侧通过酯化反应分别引入4-乙烯基苯甲酰基和4-戊氧基苯甲酰基,并作为苯乙烯衍生物单体(MED),在AIBN引发下,聚合得到了含9,10-二氢-9-氧杂-10-磷酰杂菲-10-氧化物(简称磷酰杂菲,DOPO)基团的聚苯乙烯衍生物(PED).因侧链之间具有较强的相互作用以及聚苯乙烯主链的刚性而易形成聚集形态,使分子量超出GPC的正常检测范围;同时表现出良好的热稳定性,MED和PED失重5%时的对应温度分别为339℃和345℃.也正是这两种作用同时存在,并相互制约,侧基之间产生了一定程度的规整排列,限制了磷酰杂菲基团的转动,降低了其非辐射能量转移,从而相对于MED,使PED在THF溶液中荧光强度得到了明显增强.由于PED在沉淀聚集过程中受到THF和沉淀剂(水或正己烷)的共同影响,在沉淀剂含量达到70%之前,侧基之间难以形成规整排列,其分子链内转动很大程度引起非辐射能量转移,所以随着沉淀剂含量的增加,荧光强度不断降低;然而当沉淀剂含量达到70%以上时,由于水分子能够与两个相互靠近的侧基共同形成基于氢键作用的复合超分子结构,这不仅抑制了磷酰杂菲基团的转动能力,增强了荧光强度,在一定程度上表现出AIEE特性,而且会在450nm处出现新的肩峰,以显示该结构有别于侧基自身的密聚集;但以正己烷为沉淀剂时,因不能形成氢键超分子结构,PED分子链只是无序密聚集,所以表现为只是随着正己烷加入荧光强度不断降低,没有出现荧光红移的现象。     

磷系阻燃环氧树脂研究

本文对近年来国内外9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物（DOPO）衍生物的合成及其应用于阻燃环氧树脂的方法进行介绍，并对所显示的阻燃性、热性能等作了概述和比较。将反应型磷系阻燃剂DOPO衍生物引入环氧树脂基体结构中形成阻燃持久、无卤、低烟、无毒、热稳定性好的新型含磷环氧树脂。     

DOPO及其衍生物的合成和阻燃性能研究进展

综述了近几年有机磷阻燃剂中讨论研究较多的9,10-二氢-9-氧-10-磷杂菲-10-氧化物(DOPO)及其衍生物的合成和阻燃性能的研究进展,并对DOPO及其衍生物的发展方向进行了展望。     

含空间位阻侧链取代炔烃的合成及其催化聚合

设计并合成了具有较大空间位阻侧链的取代炔烃2-炔丙氧基-1,4-对苯二甲酸二甲酯单体,分别采用WCl6,WCl6-SnPh4和[Rh(nbd)Cl]2催化体系使其聚合,考察了不同催化剂对聚合的影响.采用红外光谱和核磁共振等技术对单体及聚合物结构进行了表征,并用紫外光谱和荧光光谱研究了所得聚合物的光学性能.结果表明,使用[Rh(nbd)Cl]2催化剂时得到的聚合物是高反式结构,荧光光谱中除了侧基的350 nm发射峰外,还在429 nm处存在较弱的共轭主链发射.使用WCl6-SnPh4催化体系得到的聚合物由于较高的顺式含量,主要是侧基的发射,而较大侧基位阻使主链共轭降低.尽管存在较短的间隔基,引入较大空间位阻侧基仍然迫使聚合物主链扭曲,顺式结构中侧基空间位阻的影响更大.     

含磷酰杂菲侧基的苯乙烯衍生物聚焦诱导发光特性及其在过渡金属子检测中的应用

以2-(6-氧化-6-氢-二苯基(c,e)<1,2>氧杂磷酰基)-1,4-二羟基苯(OOPB) 为中心结构单元,通过两步酯化反应,在两侧分别引入4-戊氧基苯甲酰基和4-乙烯基苯甲酰基,得到苯乙烯衍生物(ME).由于磷酰杂菲基团的大π共轭结构和极性共同作用,使得形成聚集体后分子内转动受到限制,降低了非辐射去活效率,使 ME在达到一定聚集程度时,荧光强度成倍增加,呈现出聚集诱导发光增强(AIEE) 特性. 同时,Pt2+,Ru3+,Fe3+的加入对ME有显著的猝灭效果;而 Fe2+ 只是在形成聚集体过程中才有猝灭效果.     

含磷酰杂菲侧基的苯乙烯衍生物聚集诱导发光特性及其在过渡金属离子检测中的应用

以2-(6-氧化-6-氢-二苯基(c,e)<1,2>氧杂磷酰基)-1,4-二羟基苯(ODOPB) 为中心结构单元, 通过两步酯化反应, 在两侧分别引入4-戊氧基苯甲酰基和4-乙烯基苯甲酰基, 得到苯乙烯衍生物(MED).由于磷酰杂菲基团的大π共轭结构和极性共同作用, 使得形成聚集体后分子内转动受到限制, 降低了非辐射去活效率, 使 MED在达到一定聚集程度时, 荧光强度成倍增加, 呈现出聚集诱导发光增强(AIEE) 特性. 同时, Pt²⁺, Ru³⁺, Fe³⁺的加入对MED有显著的猝灭效果; 而Fe²⁺只是在形成聚集体过程中才有猝灭效果.     

新的不对称催化剂Rh(acac)(-)-(diop)的催化氢化反应

1970年Monsanto研究组从前手性烯烃不对称催化氢化得到L-Dopa.特别是可用不对称催化剂催化合成维生素、药物、香料和其它精细化学品后,不对称催化反应的研究引起人们极大兴趣.1971年巴黎研究组从酒石酸出发首次合成Diop,即2,3-异亚丙基-2,3-二羟基-1,4-双(二苯膦基)-丁烷[2,3-Isopropylidene-2,3-dihydroxy-1,4-bis(diphenylphosphino)butane](图1)和不对称催化剂[Rh(COD)(-)-(diop)]C1,以后陆续报道HRh( )-(diop)_2,[Rh(COD)( )-(diop)]C1,和Rh(nbd)(diop》C1的合成和催化反应.     

新型含磷阻燃剂DOPO-PPO的合成及其阻燃性能

以苯基磷酰二氯,对羟基苯甲醛及9,10-二氢-9-氧杂-10-磷杂菲(DOPO)为原料,合成了一种新型含磷阻燃剂——二[4-(次甲基-羟基-磷杂菲)苯氧基]苯基氧化磷(DOPO-PPO),其结构经1H NMR和IR表征。通过TGA和DTG研究了DOPO-PPO的热稳定性,热降解行为及成炭性能。结果表明:DOPO-PPO的起始热分解温度为210℃,在700℃时残炭为30.4%。以环氧树脂为基材,DOPO-PPO为阻燃剂,二氨基二苯硫砜为固化剂,制备了阻燃环氧树脂(3)。通过极限氧指数(LOI)和垂直燃烧(UL-94)测试了3的阻燃性能。结果表明:当DOPOPPO的添加量为12.0%(质量百分数,即312)时,阻燃级别为V-0级,LOI为34.0%。     

Synergistic flame‐retardant effect of DOPO‐based derivative and organo‐montmorillonite on glass‐fiber‐reinforced polyamide 6 T

Herein, a bridged 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) derivative (PN‐DOPO) in combination with organ‐montmorillonite (OMMT) was used to improve the flame retardancy and mechanical properties of glass‐fiber‐reinforced polyamide 6 T (GFPA6T). The flame retardancy and thermal stabilities of the cured GFPA6T composites were investigated using limiting oxygen index, vertical burning (UL‐94) test, cone calorimeter test, and thermogravimetric analysis (TGA). The morphological analysis and chemical composition of the char residues after cone calorimeter tests were characterized via scanning electron microscopy and energy dispersive spectrometry. The results indicate that 2 wt% OMMT combined with 13 wt% PN‐DOPO in GFPA6T achieved a V‐0 rating in UL‐94 test. The peak heat release rate and total smoke release remarkably decreased with the incorporation of OMMT as compared to those of GFPA6T/15 wt% PN‐DOPO. The TGA results show that the thermal stability and residual mass of the samples effectively increased with the increase in OMMT content. The morphological analysis and composition structure of the residues demonstrate that a small amount of OMMT could help form a more thermally stable and compact char layer during combustion. Also, with the incorporation of OMMT, the layers consisted of more carbon‐silicon and aluminum phosphate char in the condensed phase. Furthermore, GFPA6T/PN‐DOPO/OMMT composites exhibited excellent mechanical properties in terms of flexural modulus, flexural strength, and impact strength than the GFPA6T/PN‐DOPO system. The combination of PN‐DOPO and OMMT has improved the flame retardancy and smoke suppression of GFPA6T without compromising the mechanical properties.     

Flame‐retardant behavior of bi‐group molecule derived from phosphaphenanthrene and triazine groups on polylactic acid

The flame‐retardant polylactic acid (PLA) has been prepared via mixing the flame retardant TGIC‐DOPO derived from phosphaphenanthrene and triazine groups into matrix. The flame retardancy of TGIC‐DOPO/PLA composites was characterized using the limiting oxygen index (LOI), vertical burning test (UL94), and cone calorimeter test. Results reveal that the 10%TGIC‐DOPO/PLA composite obtained 26.1% of LOI and passed UL94 V‐0 rating. The flame‐retardant mechanism of PLA composites was characterized via thermogravimetric analysis (TGA), pyrolysis gas chromatography/mass spectroscopy, and TGA‐Fourier transform infrared. It discloses that TGIC‐DOPO promoted PLA decomposing and dripping early, and it also released the fragments with quenching and dilution effects. These actions of TGIC‐DOPO contribute to reducing the burning intensity and extinguishing the fire on droplets, thus imposing better flame retardancy to PLA. When TGIC‐DOPO was partly replaced by melamine cyanuric with dilution effect and hexa‐phenoxy‐cyclotriphosphazene with quenching effect in composites respectively, the results confirm that TGIC‐DOPO utilize well‐combination in dilution effect and quenching effect to flame retard PLA. Copyright © 2015 John Wiley & Sons, Ltd.     

基于不同间隔基的含三联苯甲壳型液晶聚乙炔的合成与性能研究

设计并合成一类含三联苯液晶基元的甲壳型液晶聚乙炔(-{HC=C-[(CH2)mOOC-terpheyl(OC6H13)2]}n-,m=5,PHA5TP(OC6)2;m=9,PHA9TP( OC6)2),研究了聚合物的热稳定性、液晶性能和发光性能,考察了间隔基的长度对其性能的影响.结果表明,三联苯液晶基元赋予单体和聚合物...     

Influence of phosphorus‐grafted expandable graphite on the flame‐retardant property of UHMWPE composite

In this paper, an efficient flame retardant, 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) was covalently grafted onto the surface of expandable graphite (EG). The resultant DOPO‐grafted expandable graphite (EG‐g‐DOPO) was characterized by Fourier transform infrared spectroscopy, energy dispersive spectroscopy, and X‐ray photoelectron spectroscopy (XPS), respectively. The thermal stability of EG‐g‐DOPO was also evaluated by thermogravimetric analysis (TGA). Moreover, a series of flame‐retardant ultra‐high‐molecular‐weight polyethylene (UHMWPE) composites with various concentrations of EG‐g‐DOPO were prepared and evaluated. The results show that the UHMWPE composite with 20 wt% EG‐g‐DOPO possesses a satisfactory UL‐94 flame‐retardant grade (V‐0) and a high limiting oxygen index (30.6%). The residual char of the UHMWPE composite with higher EG‐g‐DOPO concentration shows more compact and integrated, providing an efficient barrier for heat release.     

Novel approach to the chemical modification of poly(vinyl alcohol): Phosphorylation

The chemical modification of poly(vinyl alcohol) (PVA) was performed through oxidation followed by nucleophilic addition. PVA was oxidized by KMnO₄ to form vinyl ketone units along the polymer backbone. The chemical modification of PVA was then conducted through the reaction of the carbonyl group of the vinyl ketone unit with 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) as a nucleophile. Through this approach, the phosphorous DOPO group was attached onto the carbon atom of the polymer main chain rather than onto the pendent hydroxyl groups of PVA. The formed DOPO‐containing PVA showed improved thermal stability, organosolubility, and flame retardance. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1107–1113, 2003     

Flame retardancy mechanisms of phosphorus‐containing polyhedral oligomeric silsesquioxane (DOPO‐POSS) in polycarbonate/acrylonitrile‐butadiene‐styrene blends

The flame retardancy mechanisms of a novel polyhedral oligomeric silsesquioxane containing 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO‐POSS) in polycarbonate/acrylonitrile‐butadiene‐styrene (PC/ABS) blends are discussed. The thermal stability of PC/ABS composites with different DOPO‐POSS loadings are investigated by TGA and the enhancement of the thermal stability could be found at high temperature range. Their fire behavior is tested by the LOI, UL‐94, and cone calorimeter. Excellent flame retardancy of PC/ABS composites have been discovered with 10 wt% DOPO‐POSS loading. TGA‐FTIR, FTIR, XPS, and SEM, respectively, are used to characterize the gaseous products and the condensed residue in thermal decomposition, and the micro‐structure of the chars from cone calorimeter tests. The decomposition of PC/ABS with 10 wt% DOPO‐POSS shows significant changes compared with PC/ABS by TGA, FTIR, TGA‐FTIR, and XPS analysis. The enhancement of the thermal‐oxidative stability of PC/ABS with DOPO‐POSS is attributed to the interaction between DOPO‐POSS and PC/ABS at high temperature, which might be the key for improvement of the flame retardancy. Copyright © 2011 John Wiley & Sons, Ltd.     

Structural Chemistry of Chiral Complexes. NMR and X-ray studies on Rh1 compounds of (S)-1-[bis(p-methylphenyl)phosphino]-2-[(p-methoxybenzyl)amino]-3-methylbutane

The Rh¹(diolefin)complexes [Rh(nbd)( 2 )][PF₆] [Rh(1,5-cod)( 2 )][PF₆], and [Rh((Z)-α -acetamidocinnamic acid)( 2 )][PF₆] ( 2 = the chiral P,N-ligand (S)-1-[bis(p-methylphenyl)phospino]-2-[p-methoxybenzyl)amino]-3-methylbutane have been prepared and characterized. These complexes exit as a mixture of isomers arising from different five-membered-ring conformations and diastereoisomers due to both the prochiral nitrogen and olefin ligands. The three-dimensional solutions structures of these complexes have been studied with the specific aim of understanding how the chiral pocket is built. Aspects of the exchange dynamics and their possible relevance to homogeneous hydrogenation are discussed The solid-state structure for the nbd complex, [Rh(nbd)( 2 )][PF₆], as well as detailed one- and two-dimensional ³¹P-, ¹³C-, and ¹H-NMR results are presented.     

Enhanced thermal properties and flame retardancy of unsaturated polyester‐based hybrid materials containing phosphorus and silicon

A phosphorus and silicon containing liquid monomer (9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene 10‐oxide–vinyltrimethoxysilane (DOPO–VTS)) was synthesized by the reaction between DOPO and VTS. DOPO–VTS and methacryloxypropyltrimethoxylsilane were introduced into unsaturated polyester resin to prepare flame retardant UPR/SiO₂ (FR‐UPR/SiO₂) hybrid materials by sol–gel method and curing process. DOPO–VTS contributes excellent flame retardancy to UPR matrix, which was confirmed by the limiting oxygen index and microscale combustion calorimeter results. The thermogravimetric analysis (TGA) results indicate that the FR‐UPR/SiO₂ hybrid materials possess higher thermal stability and residual char yields than those of pure UPR at high temperature region. The thermal degradation of materials was investigated by TGA/infrared spectrometry (TG‐IR) and real‐time infrared spectrometry (RT‐IR), providing insight into the thermal degradation mechanism. Moreover, scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS) were used to explore the morphologies and chemical components of the residual char. Copyright © 2013 John Wiley & Sons, Ltd.