基于巯基功能化磁球的磁固相萃取-ICP-MS联用用于环境水样中无机砷形态分析

该文制备了一种可在pH 5.0~9.0范围内选择性吸附As(Ⅲ)的巯基（—SH）修饰的环氧基改性磁性纳米材料（Fe3O4@SiO2@GMA—S—SH MNPs）,将其与新型MSPE-ICP-MS联用实现了水中As(Ⅲ)和As(Ⅴ)的分离分析,As(Ⅴ)经Na2S2O3/KI还原后,采用MSPE-ICP-MS测得总砷含量,然后通过差减法计算。结果显示,方法对As(Ⅲ)的检出限（LOD）为1.5 ng·L-1,富集倍数为150倍,线性范围为5~3 000 ng·L-1,相对标准偏差（RSD）（c=10 ng·L-1,n=7）为9.6%。将该方法用于水质标准样品（GSB07-3171-2014）中无机砷形态分析,测定结果与参考值一致。采用该方法测定自来水As(Ⅲ)和As(Ⅴ)的含量分别为0.036、0.043 μg·L-1,湖水中含量分别为0.24、0.43 μg·L-1,加标回收率为80.9%~101%,RSD为1.5%~10%。该方法具有检出限低、富集倍数大、吸附/解吸动力学快、抗干扰能力强等优点,可用于实际水样中无机砷的形态分析。     

HPLC-ICP-MS测定中药中砷的形态

报道了高效液相色谱-电感耦合等离子体质谱(HPLC-ICP-MS)联用技术测定中药中砷的形态.采用阴离子交换柱,以含0.2 mmol/L乙二胺四乙酸(EDTA)和2 mmol/L NaH2PO4的水溶液为流动相,pH 6.0,流速为1.0 mL/min,成功分离了亚砷酸(AsⅢ)、砷酸(AsⅤ)、甲基砷(MMA)和二甲基砷(DMA).检出限分别为0.67 μg/L (AsⅢ),0.85 μg/L (DMA),0.43 μg/L (MMA),0.70 μg/L (AsⅤ).中药样品经过(1 1)甲醇水溶液超声提取,离心、过滤、氮气吹干甲醇,超纯水定容.样品加标平均萃取回收率分别为: 92.8% (AsⅢ),108% (DMA),104% (MMA),101% (AsⅤ),RSD (n=7)均小于10%.     

电化学氢化物发生-原子吸收光谱法测定不同价态的无机砷

不同价态的无机砷在玻碳电极上具有较高的电化学氢化物发生效率,同时又存在较为明显的差异。通过选择不同的电流条件,采用电化学氢化物发生与原子吸收光谱联用技术有效地实现了无机砷的形态分析。对试验参数和干扰情况进行了研究。As(Ⅲ)和As(Ⅴ)检出限分别为0.2μg.L-1和0.4μg.L-1;对砷量为20μg.L-1的条件下作了方法的精密度试验,测定结果的相对标准偏差(n=6)对As(Ⅲ)为1.9%和对As(Ⅴ)为3.1%。应用此方法分析了人发标准物质(GBW 09101),测得总砷量与证书值相符。     

微波三步提取–高效液相色谱–原子荧光法测定土壤中砷形态

采用高效液相色谱–原子荧光法对土壤中的砷形态进行分析,以了解其对土壤的污染程度。用1 mol/L磷酸–0.5 mol/L抗坏血酸混合提取剂对污染土壤样品进行三步微波提取,用高效液相色谱–原子荧光联用仪测定砷形态含量。As(Ⅲ)和As(V)标准工作曲线的线性范围均为8～100μg/L,线性相关系数(r~2)分别为0.999,0.996,检出限分别为0.11,0.72μg/L。As(Ⅲ),As(V)测定结果的相对标准偏差分别7.6%和9.1%(n=11),加标回收回收率在82.2%～98.3%之间。多数土壤中砷形态以As(V)为主,As(Ⅲ)含量较低。该方法对土壤中的砷提取效果好,测定结果可靠,可为土壤砷污染的修复提供技术支撑。     

树脂分离-氢化物发生-原子荧光光谱法测定食品中无机砷、一甲基胂和二甲基胂

建立了用阴离子交换树脂分离-氢化物发生原子荧光光谱法测定食品中无机砷、一甲基胂和二甲基胂的方法.分别从样品上样条件及二甲基胂、一甲基胂、 As(Ⅲ)和As(Ⅴ)分离条件进行了优化.研究了树脂处理程序对分离的影响,并探讨了共存离子对测定砷的干扰和消除的方法.对方法的适用范围做了研究.本方法具有操作简便、快速、灵敏度高等优点.检出限(以砷计)分别为: 无机砷0.34 μg/L,一甲基胂0.57 μg/L,二甲基胂0.46 μg/L.     

HPLC-ICP-MS联用技术分析烟草中砷的形态

采用高效液相色谱-电感耦合等离子体质谱(HPLC-ICP-MS)联用技术对烟草中砷的形态进行分析研究。烟草样品经超纯水提取,采用阴离子交换柱,以30 mmol/L碳酸铵水溶液作流动相,成功分离了亚砷酸(As(III))、砷酸(As(V))、一甲基砷(MMA)和二甲基砷(DMA),检出限依次为0.15,0.16,0.17,0.16 ng/mL,加标回收率在73.8%~107.6%之间,相对标准偏差(RSD)均小于8.0%(n=3)。     

浒苔中有毒有害元素及砷化学形态的研究

建立了微波消解-电感耦合等离子体质谱(ICP-MS)法测定浒苔中Cu、As、Cd、Hg、Pb等元素含量的分析方法,对各元素的线性关系良好(r=0.999 3～0.999 9),检出限为0.28～2.3 μg/L,元素加标回收率为83%～108%,符合痕量分析要求.并利用高效液相色谱(HPLC)与电感耦合等离子体质谱(ICP-MS)联用技术对浒苔样品中的砷化学形态进行了初步探讨,发现其中砷主要以无机As(Ⅴ)和某种未知的砷形态存在,推测该未知砷形态为砷糖类物质.     

液相色谱-氢化物发生-原子荧光光谱法检测高砷煤矿区苔藓中的砷形态

建立了高砷煤矿区酸性矿山废水溪流周围苔藓中砷形态的液相色谱-氢化物发生-原子荧光光谱(LC-HG-AFS)分析方法。该方法以7%HCl为提取剂,95℃水浴提取40min,对苔藓样品中砷形态的提取率为90.67%~97.34%。无机态的亚砷酸盐(As(Ⅲ))、二甲基砷酸(DMA)、一甲基砷酸(MMA)和砷酸盐(As(Ⅴ))的线性相关系数分别为0.9999、0.9998、1.0000、0.9992,检出限分别为0.47、1.26、0.87、1.16μg/L,加标回收率为91.40%~113.72%,相对标准偏差(RSD)在1.23%~2.14%之间。研究结果表明,该方法能够快速、准确检测苔藓中上述四种砷形态。     

HPLC–AFS联用测定海产品中砷的形态

建立了高效液相色谱–原子荧光分光光度法测定海产品中无机砷(As V,AsⅢ)、有机砷(DMA,MMA,AsB)含量的方法。样品经含10%(体积分数)HCl的提取液振荡提取、离心分离、二路形态分析预处理、高效液相色谱分离,用原子荧光光度计检测As(Ⅲ),DMA,MMA,As(V);四路条件(过氧化氢氧化和开启紫外灯)形态分析预处理装置处理,高效液相色谱分离,原子荧光光度计测定AsB。As(Ⅲ)线性范围为0～100.00μg/L,r2=0.999 7;DMA线性范围为0～100.00μg/L,r2=0.999 3;MMA线性范围为0～100.00μg/L,r2=0.999 0;As(V)线性范围为0～100.00μg/L,r2=0.999 1;AsB线性范围为0～200.00μg/L,r2=0.999 4。3个样品加标回收率为As(Ⅲ)86.7%～89.4%,DMA 111.2%～117.0%,MMA 109.7%～111.6%,As(V)83.8%～90.7%,AsB 88.3%～90.4%。用该方法测定虾仁(干)5个价态测定结果的相对标准偏差为3.07%～9.93%(n=6)。5个价态的检出限(S/N=2)为As(Ⅲ)0.29μg/L,DMA 0.36μg/L,MMA 0.27μg/L,As(V)0.56μg/L,AsB 1.46μg/L。该方法适用于海产品中As(Ⅲ),DMA,MMA,As(V),AsB含量的测定。     

纳米Fe3O4分离富集-悬浮进样-氢化物发生原子荧光法测定砷形态

研究了以纳米Fe3O4为固相吸附剂对痕量无机砷形态的吸附与分离富集,建立了无需洗脱分离的悬浮进样-氢化物发生-原子荧光法测定砷形态的方法。选择的反应体系为0.64 g/L Fe3O4悬浮液-1.0%(m/V)NaBH4溶液-5.0%(V/V)HCl(pH 8),进样5.0 mL时,得到本方法的检出限为13.5 ng/L;As(Ⅲ)浓度在0.05～3.5μg/L范围内呈良好的线性关系;测定0.5μg/L As(Ⅲ)的精密度RSD=3.4%。用国家标准物质GBW10010(大米)验证了本方法测定砷的准确性,测定结果(0.101±0.010μg/g)与标准值(0.102±0.008μg/g)吻合。采用本方法测定了近海海水和雪水样品中的无机砷形态,并进行了加标回收实验。对As(Ⅲ)和As(Ⅴ)的加标回收率在95%～110%之间,结果令人满意。     

On-line fermentation gas analysis: Error analysis and application of mass spectrometry

On-line fermentation gas analysis is of general interest because it permits the determination of metabolic rates in almost any biological process using living organisms. The consumption and production of gases (O₂, CO₂, CH₄, etc.) and volatile compounds may be determined without causing any risk of infection. Elemental balancing permits the determination of other metabolic rates if the stoichiometry is known. This was studied with the production of poly-β-hydroxybutyrate (PHB) by Alcaligenes latus. Estimations were based on the measurement of gas partial pressure and flow-rates, pH and alkali consumption rate. Experiments with a small quadrupole mass spectrometer showed unacceptable error propagation. Therefore, dynamic error propagation for all rates was studied using simulation. It was found that, for example, a 1% relative offset-calibration error for oxygen can result in an error in PHB estimation of > 50%. It is suggested that this culture is used in combination with elemental balancing for thorough tests of the accuracy of on-line gas analysis equipment. An on-line process gas analyser based on a quadrupole mass spectrometer (Balzers PGM 407) gave the following precision values (abs. vol.?%) during cultivation of Bacillus subtilis: nitrogen (m/z 14), 0.024; oxygen (m/z 32), 0.020; argon (m/z 40), 0.0011; and carbon dioxide (m/z 44), 0.0034. These values, combined with automatic recalibration, would be sufficient for reasonable estimation of PHB, biomass and substrates.     

FT-IR Spectrophotometric Analysis of Ascorbic Acid and Biotin and their Pharmaceutical Formulations

Abstract

Fourier transform–infrared (FT-IR) spectrometry was used for the rapid, direct measurement of ascorbic acid (vitamin C) and biotin (vitamin H) in different pharmaceutical products. Conventional KBr spectra were compared for the best determination of active substances in drug preparations. The Beer–Lambert law and chemometric approaches were applied in data processing.     

区分化学分析法与仪器分析法适用性的实践教学探索

根据方法原理,分析化学的常用分析方法可分为化学分析法和仪器分析法。高灵敏度、高选择性、高自动化、数字化和智能化已成为分析化学的发展方向,仪器分析法成为了分析化学发展的主流和热点。因此,在校本科生往往忽视化学分析法的重要作用以及适用范围,陷入仪器分析法为万能分析方法的误区。本文选用络合滴定法和原子吸收光谱法分别对常量含铅样品进行测试,通过考察测试结果的相对误差大小,探索了化学分析法和仪器分析法的适用范围,从而纠正了在校本科生的唯仪器分析法的错误观念。     

Advances and analytical applications in chemiluminescence coupled to capillary electrophoresis

The present review presents the state of the art of the developments, key strategies and analytical applications of chemiluminescence detection coupled to CE (CE‐CL). Different parts considering the most common CL systems have been included, such as the tris(2,2′‐bipyridine)ruthenium(II) system, the luminol and derivatives reaction, the peroxyoxalate CL or direct oxidations. New advances in homemade configurations and applications in different fields such as clinical, pharmaceutical, environmental and food analysis have been included. The focus is on studies which appeared from 2000 to the end of 2009.     

Chemometric and trend analysis of water quality of the South Chennai lakes: an integrated environmental study

In order to bring out the nature of the factors influencing lake water composition, multivariate statistical analysis and trend analysis were performed based on the hydrochemical data of the study area, namely, South Chennai. Change in land use pattern and settlements along the banks of the lakes alters the quality and quantity of the surface water. In the present study, the R‐mode factor analysis and cluster analysis were applied to the geochemical parameters of the water to identify the factors affecting the chemical composition of the lake water. Dendograms of both the seasons give three major clusters, reflecting the groups of unpolluted to moderately polluted, polluted, and heavily polluted stations. The movement of stations from one cluster to another clearly brings out the seasonal variation in the chemical composition of the lake water. The complex hydrochemical data of the surface water were interpreted by condensing them into three major factors. Factor score analysis was used successfully to delineate the stations under study and the role of the contributing factors, and the nature of factors responsible for the variation in chemical composition of the water has been clearly brought out. Results of trend analysis using ArcGIS clearly indicate that the trend in water quality is deteriorating at a faster rate in the eastern part of the study area. It is understood that although natural shifts probably can account for some of the variation, it is most likely that human activities play a major role in affecting the water quality on a regional scale. Copyright © 2014 John Wiley & Sons, Ltd.     

Impact of alkali treatment on physico-chemical,thermal, structural and tensile properties of Carica papaya bark fibers

This study aims to examine the effect of sodium hydroxide (NaOH) treatment on the physico-chemical properties, structure, thermal, tensile and surface topography of Carica papaya fibers (CPFs). The surface of raw CPFs was modified by soaking with 5% NaOH solution for 15, 30, 45, 60, 75 and 90?min. The results of thermo-gravimetric analysis revealed that the optimum treatment time for alkali treatment was 60?min. It was found that the alkali treatment improved the properties of the CPFs. The results of TGA, FT-IR, XRD and AFM suggest that the treated CPF is a suitable alternative as reinforcement in polymer composites.     

FTIR-Microscopic investigations of micro-phases and micro-phase-transitions in organic substances

From visual inspection by light microscopy it is likely that structural modifications are coexisting in microdomains of e.g.a-oxofuran acetamide, salicylic acid hydrazide and benzotriazole-5-carbonic acid methyl ester. An isolation of these phases is, however, not easy and a direct analysisin situ requires a non-destructive method of molecular specific microanalysis. Using FTIR-microscopy the samples prepared as thin film by cooling from the molten stage on an Al-mirror could be characterized as heterogeneous (lateral resolution 20m). The IR-spectra of the different microphases could be recorded for the first timein situ. Any conventional sample preparation technique (KBr-disk or dissolution) would destroy the important information about the microphase composition. A mere comparison of the micro-FTIR-spectra shows clearly the difference between the microphases. By using step scanning and image processing devices also invisible microphases can be detected (FTIR-microprobe). FTIR-microscopy can be successfully used to investigate temperatureinduced microphase transitions. Examples for D,L-norleucine, oxeladin citrate and 2-chloro-ethane-amine hydrochloride are given also.     

Micro- and nano-thermal analysis applied to multi-layered biaxially-oriented polypropylene films

In this paper we compare Wollaston and silicon probes for localized thermal analysis measurements (LTA) on biaxially oriented polypropylene (BOPP) films. Up till now, no real comparison was reported in literature between the different transition temperatures measured using Wollaston and silicon probes. Using different types of probes for studying the same material proves to be very interesting. Using the Wollaston probe, the thermal properties and thickness of a 1 μm thick skin layer can be determined by through-thickness local thermal analysis measurements. The improved resolution of the silicon probes, enables the measurement of thermal properties of individual layers in a cross-sectioned film, even for layers of only 1 μm thickness. Based on the results, the silicon probes seem to be more sensitive toward the start of the melting process, since the silicon probe already penetrates at lower temperature, as compared to the Wollaston probes. This sensitivity can be exploited for studying the effect of variations in thermal history between or within samples.     

分析化学过去、现在和展望

作者首先叙述了分析化学的源起,认为这门科学与人类文明文化,如青铜、黄铜冶炼、酿酒等大有关系。继出现东、西方的丹金术、欧洲中世纪的大试金术。后者可称为现代分析化学的前驱。适十七八世纪现代化学之兴起,分析化学起了主要作用。嗣后重量法、容量法、比色法、分光光度法、发射光谱法、极谱法、质谱法、层析法等等相继出现。这些方法可分为两大类——即化学法和仪器法。二者各有其优缺点;需要相辅相成,而决不是对立、排挤。另一方面,常量法之后又出现微量法和痕量分析。最后为分析化学在我国健康成长提出一些看法和意见。     

Spectrophotometric flow-injection determination of copper and nickel in plant digests exploiting differential kinetic analysis and multi-site detection

A novel strategy for implementing differential reaction-rate methods in flow-injection analysis is proposed and applied to the determination of copper and nickel in plant digests using 2-(5-brom-2-pyridylazo)-5-(diethylamino)-phenol (Br-PADAP) as the color-forming reagent. Multi-site detection is involved, therefore the flow cell is displaced between two monitoring sites, and the analytical signals refer to different conditions of sample dispersion, reaction development and timing.The system handles 20 samples h⁻¹ and requires 0.32 mg Br-PADAP per determination. Signal additivity was evaluated within 98 and 102%, and linear responses (r > 0.999; n = 6) were verified for both copper and nickel up to 0.80 mg l⁻¹. Detection limits of 0.01 and 0.04 mg l⁻¹ Cu and Ni were estimated by considering the highest concentration of the counter analyte. Results are precise (R.S.D. < 2%) and in agreement with ICP-OES (95% confidence level). Potentialities and limitations of the approach are discussed.