Double Perovskite LaFexNi1−xO3 Nanorods Enable Efficient Oxygen Evolution Electrocatalysis

Perovskite‐based electrocatalysts are one of the most promising materials for oxygen evolution reaction (OER), but their activity and durability are still far from desirable. Herein, we demonstrate that the double perovskite LaFe_xNi_1?xO₃ (LFNO) nanorods (NRs) can be adopted as highly active and stable OER electrocatalysts. The optimized LFNO‐II NRs with Ni/Fe ratio of 8:2 achieve a low overpotential of 302 mV at 10 mA cm^?2 and a small Tafel slope of 50 mV dec^?1, outperforming those of the commercial Ir/C. The LFNO‐II NRs also show high OER stability with slight current decrease after 20 h. The enhanced activity is explained by the improved surface area, tailored electronic structure as well as strong hybridization between O and Ni.     

Remarkable Oxygen‐Evolution Activity of a Perovskite Oxide from the Ca2−xSrxFe2O6−δ Series

Herein in we report the unprecedented catalytic activity of an iron‐based oxygen‐deficient perovskite for the oxygen‐evolution reaction (OER). The systematic trends in OER activity as a function of composition, defect‐order, and electrical conductivity have been demonstrated, leading to a methodical increase in OER catalytic activity: Ca₂Fe₂O_6?δ<CaSrFe₂O_6?δ<Sr₂Fe₂O_6?δ. Sr₂Fe₂O_6?δ also has the highest electrical conductivity and a unique type of defect‐order. In conventional experiments using glassy carbon electrode, Sr₂Fe₂O_6?δ shows better OER activity than the current state of the art catalysts, Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3?δ and RuO₂. It also offers a high intrinsic electrical conductivity, which allows it to act as a catalyst without the need for glassy carbon electrode or carbon powder. Pure disks of this material exhibit an outstanding activity for OER, without any additives or need for electrode preparation.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Cobalt‐Doped Perovskite‐Type Oxide LaMnO3 as Bifunctional Oxygen Catalysts for Hybrid Lithium–Oxygen Batteries

Perovskite‐type oxides based on rare‐earth metals containing lanthanum manganate are promising catalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) in alkaline electrolyte. Perovskite‐type LaMnO₃ shows excellent ORR performance, but poor OER activity. To improve the OER performance of LaMnO₃, the element cobalt is doped into perovskite‐type LaMnO₃ through a sol–gel method followed by a calcination process. To assess electrocatalytic activities for the ORR and OER, a series of LaMn_1?xCo_xO₃ (x=0, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5) perovskite oxides were synthesized. The results indicate that the amount of doped cobalt has a significant effect on the catalytic performance of LaMn_1?xCo_xO₃. If x=0.3, LaMn_0.7Co_0.3O₃ not only shows a tolerable electrocatalytic activity for the ORR, but also exhibits a great improvement (>200 mV) on the catalytic activity for the OER; this indicates that the doping of cobalt is an effective approach to improve the OER performance of LaMnO₃. Furthermore, the results demonstrate that LaMn_0.7Co_0.3O₃ is a promising cost‐effective bifunctional catalyst with high performance in the ORR and OER for application in hybrid Li?O₂ batteries.     

Continuous Dehydrogenation of n‐Pentanol over a Cr Modified Cu/γ‐Al2O3‐La2O3 Catalyst

The oxidant‐free dehydrogenation of n‐pentanol over copper based catalysts was investigated in this paper. The effect of metal modification on the activity and stability of the copper catalyst supported on γ‐Al₂O₃ and La₂O₃ (Cu/γ‐Al₂O₃‐La₂O₃) was clarified and a Cr modified Cu/Al₂O₃‐La₂O₃ (Cu‐Cr/γ‐Al₂O₃‐La₂O₃) showed the best catalytic performance. The conversion of n‐pentanol was 70.0% and the selectivity for n‐pentanal increased to 97.1% over Cu‐Cr/γ‐Al₂O₃‐La₂O₃. X‐ray diffraction and temperature programmed reduction of H₂ indicated that the addition of Cr favors the formation and reduction of the copper oxide, and the dispersion of the active Cu⁰ species, accounting for the good activity and stability of this catalyst. Furthermore, the lower amount of acidic sites in Cu‐Cr/γ‐Al₂O₃‐La₂O₃ is suggested to suppress the dehydration in oxidant‐free dehydrogenation of n‐pentanol, accounting for the higher selectivity for n‐pentanal.     

Coupling Magnetic Single‐Crystal Co2Mo3O8 with Ultrathin Nitrogen‐Rich Carbon Layer for Oxygen Evolution Reaction

Transition‐metal oxides as electrocatalysts for the oxygen evolution reaction (OER) provide a promising route to face the energy and environmental crisis issues. Although palmeirite oxide A₂Mo₃O₈ as OER catalyst has been explored, the correlation between its active sites (tetrahedral or octahedral) and OER performance has been elusive. Now, magnetic Co₂Mo₃O₈@NC‐800 composed of highly crystallized Co₂Mo₃O₈ nanosheets and ultrathin N‐rich carbon layer is shown to be an efficient OER catalyst. The catalyst exhibits favorable performance with an overpotential of 331 mV@10 mA cm^?2 and 422 mV@40 mA cm^?2, and a full water‐splitting electrolyzer with it as anode catalyst shows a cell voltage of 1.67 V@10 mA cm^?2 in alkaline. Combined HAADFSTEM, magnetic, and computational results show that factors influencing the OER performance can be attributed to the tetrahedral Co sites (high spin, t₂³e⁴), which improve the OER kinetics of rate‐determining step to form *OOH.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

Fe2O3‐N‐doped Honeycomb‐like Porous Carbon Derived from Nature Silk Sericin as Electrocatalysts for Oxygen Evolution Reaction

A facile method is reported to form a honeycomb‐like porous nanomaterial by intercalation of iron nitrate using nature silk sericin (SS) as nitrogen and carbon source. A series of Fe₂O₃ nanoparticles anchored on Fe₂O₃‐N‐doped graphite carbon electrocatalysts (SS‐Fe) were synthesized, exhibits well‐defined pore structure and excellent oxygen evolution reaction (OER) catalytic activities. Among these materials, SS‐Fe‐0.5 shows the best performance, the overpotential of SS‐Fe‐0.5 at 10 mA · cm^–2 is 440 mV (vs. RHE) and the Tafel slope is only 68 mV · dec^–1. The results indicate that it is promising to the preparation of carbon catalyst materials using natural, renewable and abundant resources for electrocatalysis.     

A Dissolution/Precipitation Equilibrium on the Surface of Iridium‐Based Perovskites Controls Their Activity as Oxygen Evolution Reaction Catalysts in Acidic Media

Recently, Ir^V‐based perovskite‐like materials were proposed as oxygen evolution reaction (OER) catalysts in acidic media with promising performance. However, iridium dissolution and surface reconstruction were observed, questioning the real active sites on the surface of these catalysts. In this work, Sr₂MIr^(V)O₆ (M=Fe, Co) and Sr₂Fe_0.5Ir_0.5^(V)O₄ were explored as OER catalysts in acidic media. Their activities were observed to be roughly equal to those previously reported for La₂LiIrO₆ or Ba₂PrIrO₆. Coupling electrochemical measurements with iridium dissolution studies under chemical or electrochemical conditions, we show that the deposition of an IrO_x layer on the surface of these perovskites is responsible for their OER activity. Furthermore, we experimentally reconstruct the iridium Pourbaix diagram, which will help guide future research in controlling the dissolution/precipitation equilibrium of iridium species for the design of better Ir‐based OER catalysts.     

Perovskite SrCo0.9Nb0.1O3−δ as an Anion‐Intercalated Electrode Material for Supercapacitors with Ultrahigh Volumetric Energy Density

We have synthesized and characterized perovskite‐type SrCo_0.9Nb_0.1O_3−δ (SCN) as a novel anion‐intercalated electrode material for supercapacitors in an aqueous KOH electrolyte, demonstrating a very high volumetric capacitance of about 2034.6 F cm⁻³ (and gravimetric capacitance of ca. 773.6 F g⁻¹) at a current density of 0.5 A g⁻¹ while maintaining excellent cycling stability with a capacity retention of 95.7 % after 3000 cycles. When coupled with an activated carbon (AC) electrode, the SCN/AC asymmetric supercapacitor delivered a specific energy density as high as 37.6 Wh kg⁻¹ with robust long‐term stability.     

σ‐Insertive Mechanism versus Concerted Non‐insertive Mechanism in the Intramolecular Hydroamination of Aminoalkenes Catalyzed by Phenoxyamine Magnesium Complexes: A Synthetic and Computational Study

The phenoxyamine magnesium complexes [{ONN}MgCH₂Ph] ( 4 a : {ONN}=2,4‐tBu₂‐6‐(CH₂NMeCH₂CH₂NMe₂)C₆H₂O^?; 4 b : {ONN}=4‐tBu‐2‐(CH₂NMeCH₂CH₂NMe₂)‐6‐(SiPh₃)C₆H₂O^?) have been prepared and investigated with respect to their catalytic activity in the intramolecular hydroamination of aminoalkenes. The sterically more shielded triphenylsilyl‐substituted complex 4 b exhibits better thermal stability and higher catalytic activity. Kinetic investigations using complex 4 b in the cyclisation of 1‐allylcyclohexyl)methylamine ( 5 b ), respectively, 2,2‐dimethylpent‐4‐en‐1‐amine ( 5 c ), reveal a first‐order rate dependence on substrate and catalyst concentration. A significant primary kinetic isotope effect of 3.9±0.2 in the cyclisation of 5 b suggests significant N?H bond disruption in the rate‐determining transition state. The stoichiometric reaction of 4 b with 5 c revealed that at least two substrate molecules are required per magnesium centre to facilitate cyclisation. The reaction mechanism was further scrutinized computationally by examination of two rivalling mechanistic pathways. One scenario involves a coordinated amine molecule assisting in a concerted non‐insertive N?C ring closure with concurrent amino proton transfer from the amine onto the olefin, effectively combining the insertion and protonolysis step to a single step. The alternative mechanistic scenario involves a reversible olefin insertion step followed by rate‐determining protonolysis. DFT reveals that a proton‐assisted concerted N?C/C?H bond‐forming pathway is energetically prohibitive in comparison to the kinetically less demanding σ‐insertive pathway (ΔΔG^≠=5.6 kcal mol^?1). Thus, the σ‐insertive pathway is likely traversed exclusively. The DFT predicted total barrier of 23.1 kcal mol^?1 (relative to the {ONN}Mg pyrrolide catalyst resting state) for magnesium?alkyl bond aminolysis matches the experimentally determined Eyring parameter (ΔG^≠=24.1(±0.6) kcal mol^?1 (298 K)) gratifyingly well.     

Mass‐Production of Mesoporous MnCo2O4 Spinels with Manganese(IV)‐ and Cobalt(II)‐Rich Surfaces for Superior Bifunctional Oxygen Electrocatalysis

A mesoporous MnCo₂O₄ electrode material is made for bifunctional oxygen electrocatalysis. The MnCo₂O₄ exhibits both Co₃O₄‐like activity for oxygen evolution reaction (OER) and Mn₂O₃‐like performance for oxygen reduction reaction (ORR). The potential difference between the ORR and OER of MnCo₂O₄ is as low as 0.83 V. By XANES and XPS investigation, the notable activity results from the preferred Mn^IV‐ and Co^II‐rich surface. The electrode material can be obtained on large‐scale with the precise chemical control of the components at relatively low temperature. The surface state engineering may open a new avenue to optimize the electrocatalysis performance of electrode materials. The prominent bifunctional activity shows that MnCo₂O₄ could be used in metal–air batteries and/or other energy devices.     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

Characterization and Activity of Cu‐MnOx/γ‐Al2O3 Catalyst for Hydrogenation of Carbon Dioxide

The effect of manganese on the dispersion, reduction behavior and active states of surface of supported copper oxide catalysts have been investigated by XRD, temperature‐programmed reduction and XPS. The activity of methanol synthesis from CO₂/H₂ was also investigated. The catalytic activity over CuO‐MnO_x/γ‐Al₂O₃ catalyst for CO₂ hydrogenation is higher than that of CuO/γ‐Al₂O₃. The adding of manganese is beneficial in enhancing the dispersion of the supported copper oxide and make the TPR peak of the CuO‐MnK_x/γ‐Al₂O₃ catalyst different from the individual supported copper and manganese oxide catalysts, which indicates that there exists strong interaction between the copper and manganese oxide. For the CuO/γ‐Al₂O₃ catalyst there are two reducible copper oxide species; α and β peaks are attributed to the reduction of highly dispersed copper oxide species and bulk CuO species, respectively. For the CuO‐MnO_x/γ‐Al₂O₃ catalyst, four reduction peaks are observed, α peak is attributed to the dispersed copper oxide species; β peak is ascribed to the bulk CuO; γ peak is attributed to the reduction of high dispersed CuO interacting with manganese; δ peak may be the reduction of the manganese oxide interacting with copper oxide. XPS results show that Cu⁺ mostly existed on the working surface of the Cu‐Mn/γ‐Al₂O₃ catalysts. The activity was promoted by Cu with positive charge which was formed by means of long path exchange function between Cu? O? Mn. These results indicate that there is synergistic interaction between the copper and manganese oxide, which is responsible for the high activity of CO₂ hydrogenation.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

A Polyimide Nanolayer as a Metal‐Free and Durable Organic Electrode Toward Highly Efficient Oxygen Evolution

The exploitation of metal‐free organic polymers as electrodes for water splitting reactions is limited by their presumably low activity and poor stability, especially for the oxygen evolution reaction (OER) under more critical conditions. Now, the thickness of a cheap and robust polymer, poly(p‐phenylene pyromellitimide) (PPPI) was rationally engineered by an in situ polymerization method to make the metal‐free polymer available for the first time as flexible, tailorable, efficient, and ultra‐stable electrodes for water oxidation over a wide pH range. The PPPI electrode with an optimized thickness of about 200 nm provided a current density of 32.8 mA cm^?2 at an overpotential of 510 mV in 0.1 mol L^?1 KOH, which is even higher than that (31.5 mA cm^?2) of commercial IrO₂ OER catalyst. The PPPI electrodes are scalable and stable, maintaining 92 % of its activity after a 48‐h chronoamperometric stability test.     

Hydrogen Production by Water Dissociation in Surface‐Modified BaCoxFeyZr1−x−yO3−δ Hollow‐Fiber Membrane Reactor with Improved Oxygen Permeation

A porous perovskite BaCo_xFe_yZr_0.9?x?yPd_0.1O_3?δ (BCFZ‐Pd) coating was deposited onto the outer surface of a BaCo_xFe_yZr_1?x?yO_3?δ (BCFZ) perovskite hollow‐fiber membrane. The surface morphology of the modified BCFZ fiber was characterized by scanning electron microscopy (SEM), indicating the formation of a BCFZ‐Pd porous layer on the outer surface of a dense BCFZ hollow‐fiber membrane. The oxygen permeation flux of the BCFZ membrane with a BCFZ‐Pd porous layer increased 3.5 times more than that of the blank BCFZ membrane when feeding reactive CH₄ onto the permeation side of the membrane. The blank BCFZ membrane and surface‐modified BCFZ membrane were used as reactors to shift the equilibrium of thermal water dissociation for hydrogen production because they allow the selective removal of the produced oxygen from the water dissociation system. It was found that the hydrogen production rate increased from 0.7 to 2.1 mL H₂ min^?1 cm^?2 at 950 °C after depositing a BCFZ‐Pd porous layer onto the BCFZ membrane.     

Ceramic Filter Balls Loaded with α-Fe2O3 and Their Application to NH3-N Wastewater Treatment

Hydrolysis reaction of Fe(NO₃)₃ at a high temperature in the presence of urea as the homogeneous precipitant was studied. With the prepared ceramic filter balls loaded with α-Fe₂O₃ after high temperature calcination, the loading of α-Fe₂O₃ on the porous ceramic filter balls from Fe(NO₃)₃ solutions of different concentrations and mechanical stability of the loaded α-Fe₂O₃ were studied. The product was characterized using XRD and SEM. Adsorption experiments were conducted to evaluate the performance of the product in adsorbing NH₃-N. It turned out that the specific surface area of the ceramic filter balls loaded with α-Fe₂O₃ had increased to 36.5387 m²/g from original 4.6127 m²/g. When the concentration of Fe(NO₃)₃ was 0.40 mol/L, the loading of α-Fe₂O₃ on the ceramic filter balls accounted for 8.4% of the total mass of the adsorbent and α-Fe₂O₃ was adsorbed on the filter balls very well. The adsorption isotherm of NH₃-N on the ceramic filter ball adsorbent loaded with α-Fe₂O₃ was of Langmuir type. The saturated adsorption capacity was 3.33 mg/L, and the adsorption constant K was 0.1873. NH₃-N was adsorbed by α-Fe₂O₃ more easily, which was a kind of specific adsorption.     

Effect of Calcination Temperature and Pretreatment with Reaction Gas on Properties of Co/γ‐Al2O3 Catalysts for Partial Oxidation of Methane

The effects of calcination temperature and feedstock pretreatment on the catalytic performance of Co/γ‐Al₂O₃ catalysts were studied for partial oxidation of methane (POM) to synthesis gas, with emphasis on the role of feedstock pretreatment. The physicochemical properties of the catalysts were characterized by N₂ adsorption, X‐ray diffraction (XRD), transmission electron microscopy (TEM), H₂ temperature‐programmed reduction (H₂‐TPR), and Raman spectroscopy. The results showed that the pretreatment of the catalyst by reaction gas significantly improved the catalytic activity and stability for the POM reaction. On the other hand, the effect of calcination temperature was less significant. Although the initial activity was increased by an increased calcination temperature, the catalyst without the feedstock pretreatment suffered a rapid deactivation. The reaction‐atmosphere pretreatment was revealed as a process that mainly modified the surface structure of the catalyst. In that process, the formation of a CoAl₂O₄‐like compound led to high Co metal dispersion after reduction, and the transformation of the carrier into α‐Al₂O₃ occurred over the catalyst surface. Both the high dispersion of cobalt and the presence of α‐Al₂O₃ surface phase were assumed as the important factors resulting in an excellent catalytic performance in terms of high activity and high stability.