Solid‐State Carbon Dots with Efficient Cyan Emission towards White Light‐Emitting Diodes

Efficient cyan‐emitting solid carbon dots (CDs) were synthesized via a one‐pot hydrothermal method. The obtained solid CDs show a broad absorption from 270–460 nm with a maximum around 400 nm, and emit intense cyan light around 500 nm with an internal photoluminescence quantum efficiency of 34.1 % under 400 nm excitation. The emission maximum of the solid CDs remains unchanged under 320–400 nm excitations. Compared with dilute aqueous of CDs (2.5 mg mL^?1), the emission of solid CDs shows an obvious red‐shift of 50 nm. The red‐shift is caused by resonant energy transfer due to larger spectral overlap and smaller interparticle distance, together with a new surface state caused by aggregation in solid CDs. A lamp with white LEDs was fabricated by dropping a mixture of solid CDs, CaAlSiN₃:Eu²⁺ and silicon resin on the top of a near‐ultraviolet LED chip. Under an operating current of 20 mA, the as‐fabricated white LED generates a high‐quality, warm white light with a color rendering index of 86.1, a color temperature of 4340 K, and a luminescence efficiency of 31.3 lm W^?1.     

Efficient White‐Light Generation from Ionically Self‐Assembled Triply‐Fluorescent Organic Nanoparticles

Low cost, simple, and environmentally friendly strategies for white‐light generation which do not require rare‐earth phosphors or other toxic or elementally scare species remain an essentially unmet challenge. Progress in the area of all‐organic approaches is highly sought, single molecular systems remaining a particular challenge. Taking inspiration from the designer nature of ionic‐liquid chemistry, we now introduce a new strategy toward white‐light emission based on the facile generation of nanoparticles comprising three different fluorophores assembled in a well‐defined stoichiometry purely through electrostatic interactions. The building blocks consist of the fluorophores aminopyrene, fluorescein, and rhodamine 6G which represent blue, green, and red‐emitting species, respectively. Spherical nanoparticles 16(±5) nm in size were prepared which display bright white‐light emission with high fluorescence quantum efficiency (26 %) and color coordinate at (0.29, 0.38) which lie in close proximity to pure white light (0.33, 0.33). It is noteworthy that this same fluorophore mixture in free solution yields only blue emission. Density functional theory calculations reveal H‐bond and ground‐state proton transfer mediated absolute non‐parallel orientation of the constituent units which result in frustrated energy transfer, giving rise to emission from the individual centers and concomitant white‐light emission.     

One‐pot synthesis of carbon dots@ZrO2 nanoparticles with tunable solid‐state fluorescence

In recent years, fluorescent carbon dots (CDs) have been developed and showed potential applications in biomedical imaging and light‐emitting diodes (LEDs) for their excellent fluorescent properties. However, it still remains a challenge to incorporate fluorescent CDs into the host matrix in situ to overcome their serious self‐quenching. Herein, a one‐pot hydrothermal method is used to prepare nano‐zirconia with CDs (CDs@ZrO₂) nanoparticles. During the reaction, CDs and nano‐zirconia are generated simultaneously and connected with silane coupling agent. The CDs@ZrO₂ nanoparticles exhibit tunable emission wavelength from 450 to 535 nm emission by regulating the content of citric acid in the feed. The quantum yield of the CDs@ZrO₂ is up to 23.8%. Furthermore, the CDs@ZrO₂ nanoparticles with regulable fluorescence emission can be used for the fluorescent material to prepare white LEDs. The prepared LED has significant white light emission with color coordinates of (0.30, 0.37) and its color rendering index (CRI) is 67.1. In summary, we have developed the solid‐state CDs@ZrO₂ nanoparticles with tunable emission by a valuable strategy, that is, one‐pot method, for white LEDs.     

Ultra‐Narrow‐Band Blue‐Emitting Oxoberyllates AELi2[Be4O6]:Eu2+ (AE=Sr,Ba) Paving the Way to Efficient RGB pc‐LEDs

Highly efficient phosphor‐converted light‐emitting diodes (pc‐LEDs) are popular in lighting and high‐tech electronics applications. The main goals of present LED research are increasing light quality, preserving color point stability and reducing energy consumption. For those purposes excellent phosphors in all spectral regions are required. Here, we report on ultra‐narrow band blue emitting oxoberyllates AELi₂[Be₄O₆]:Eu²⁺ (AE=Sr,Ba) exhibiting a rigid covalent network isotypic to the nitridoalumosilicate BaLi₂[(Al₂Si₂)N₆]:Eu²⁺. The oxoberyllates’ extremely small Stokes shift and unprecedented ultra‐narrow band blue emission with fwhm ≈25 nm (≈1200 cm^?1) at λ_em=454–456 nm result from its rigid, highly condensed tetrahedra network. AELi₂[Be₄O₆]:Eu²⁺ allows for using short‐wavelength blue LEDs (λ_em<440 nm) for efficient excitation of the ultra‐narrow band blue phosphor, for application in violet pumped white RGB phosphor LEDs with improved color point stability, excellent color rendering, and high energy efficiency.     

Efficient Solid‐State Light‐Emitting CuCdS Nanocrystals Synthesized in Air

Semiconductor nanocrystals (NCs) possess high photoluminescence (PL) typically in the solution phase. In contrary, PL rapidly quenches in the solid state. Efficient solid state luminescence can be achieved by inducing a large Stokes shift. Here we report on a novel synthesis of compositionally controlled CuCdS NCs in air avoiding the usual complexity of using inert atmosphere. These NCs show long‐range color tunability over the entire visible range with a remarkable Stokes shift up to about 1.25 eV. Overcoating the NCs leads to a high solid‐state PL quantum yield (QY) of ca. 55 % measured by using an integrating sphere. Unique charge carrier recombination mechanisms have been recognized from the NCs, which are correlated to the internal NC structure probed by using extended X‐ray absorption fine structure (EXAFS) spectroscopy. EXAFS measurements show a Cu‐rich surface and Cd‐rich interior with 46 % Cu^I being randomly distributed within 84 % of the NC volume creating additional transition states for PL. Color‐tunable solid‐state luminescence remains stable in air enabling fabrication of light‐emitting diodes (LEDs).     

Tuning Mixed‐Valent Eu2+/Eu3+ in Strontium Formate Frameworks for Multichannel Photoluminescence

Cooperative performance of mixed‐valent Eu²⁺/Eu³⁺ in single‐compound phosphors offers significant advantages in color rendering and luminescence efficiency, but their synthesis is challenging because of Eu²⁺ oxidation. Using the tunable nature of the metal‐ion nodes in metal–organic frameworks (MOFs), we present an in situ reduction and crystallization route for preparing MOFs and doping Eu²⁺/Eu³⁺ with a controlled ratio. These materials exhibit rich photoluminescence, including intrinsic‐ and sensitized‐emissions of Eu²⁺ and Eu³⁺, and long‐lived luminescence from charge transfer. Color rendering can be easily achieved by fine‐tuning the valence states of Eu. A linear relation between temperature and the intensity ratio of Eu²⁺/Eu³⁺ emissions provides outstanding properties for applications as self‐calibrated luminescent thermometers with a wide working temperature range. Further incorporation of Tb³⁺ into the MOFs results in white light, utilizing all Eu²⁺,Tb³⁺, and Eu³⁺ emissions in a single crystalline lattice.     

White‐Light Emission from Dual‐Way Photon Energy Conversion in a Dye‐Encapsulated Metal–Organic Framework

The design of white‐light phosphors is attractive in solid‐state lighting (SSL) and related fields. A new strategy in obtaining white light emission (WLE) from dual‐way photon energy conversion in a series of dye@MOF ( LIFM‐WZ‐6 ) systems is presented. Besides the traditional UV‐excited one‐photon absorption (OPA) pathway, white‐light modulation can also be gained from the combination of NIR‐excited green and red emissions of MOF backbone and encapsulated dyes via two‐photon absorption (TPA) pathway. As a result, down‐conversion OPA white light was obtained for RhB⁺@LIFM‐WZ‐6 (0.1 wt %), BR‐2⁺@LIFM‐WZ‐6 (2 wt %), and APFG⁺@LIFM‐WZ‐6 (0.1 wt %) samples under 365 nm excitation. RhB⁺@LIFM‐WZ‐6 (0.05 wt %), BR‐2⁺@LIFM‐WZ‐6 (1 wt %) and APFG⁺@LIFM‐WZ‐6 (0.05 wt %) exhibit up‐conversion TPA white light under the excitation of 800, 790, and 730 nm, respectively. This new WLE generation strategy combines different photon energy conversion mechanisms together.     

Full‐Spectrum Persistent Luminescence Tuning Using All‐Inorganic Perovskite Quantum Dots

Applications of persistent luminescence phosphors as night or dark‐light vision materials in many technological fields have fueled up a growing demand for rational control over the emission profiles of the phosphors. This, however, remains a daunting challenge. Now a unique strategy is reported to fine‐tune the persistent luminescence by using all‐inorganic CsPbX₃ (X=Cl, Br, and I) perovskite quantum dots (PeQDs) as efficient light‐conversion materials. Full‐spectrum persistent luminescence with wavelengths covering the entire visible spectral region is achieved through tailoring of the PeQD band gap, in parallel with narrow bandwidth of PeQDs and highly synchronized afterglow decay owing to the single energy storage source. These findings break through the limitations of traditional afterglow phosphors, thereby opening up opportunities for persistent luminescence materials for applications such as a white‐emitting persistent light source and dark‐light multicolor displays.     

Luminescence Properties of Ca2Ga2SiO7:RE Phosphors for UV White‐Light‐Emitting Diodes

A series of Eu²⁺‐, Ce³⁺‐, and Tb³⁺‐doped Ca₂Ga₂SiO₇ phosphors is synthesized by using a high‐temperature solid‐state reaction. The powder X‐ray diffraction and structure refinement data indicate that our prepared phosphors are single phased and the phosphor crystalizes in a tetrahedral system with the ${P\bar 42m}$ (113) space group. The Eu²⁺‐ and Ce³⁺‐doped phosphors both have broad excitation bands, which match well with the UV light‐emitting diodes chips. Under irradiation of λ=350 nm, Ca₂Ga₂SiO₇:Eu²⁺ and Ca₂Ga₂SiO₇:Ce³⁺, Li⁺ have green and blue emissions, respectively. Luminescence of Ca₂Ga₂SiO₇:Tb³⁺, Li⁺ phosphor varies with the different Tb³⁺ contents. The thermal stability and energy‐migration mechanism of Ca₂Ga₂SiO₇:Eu²⁺ are also studied. The investigation results indicate that the prepared Ca₂Ga₂SiO₇:Eu²⁺ and Ca₂Ga₂SiO₇:Ce³⁺, Li⁺ samples show potential as green and blue phosphors, respectively, for UV‐excited white‐light‐emitting diodes.     

Ba3P5N10Br:Eu2+: A Natural‐White‐Light Single Emitter with a Zeolite Structure Type

Illumination sources based on phosphor‐converted light emitting diode (pcLED) technology are nowadays of great relevance. In particular, illumination‐grade pcLEDs are attracting increasing attention. Regarding this, the application of a single warm‐white‐emitting phosphor could be of great advantage. Herein, we report the synthesis of a novel nitridophosphate zeolite Ba₃P₅N₁₀Br:Eu²⁺. Upon excitation by near‐UV light, natural‐white‐light luminescence was detected. The synthesis of Ba₃P₅N₁₀Br:Eu²⁺ was carried out using the multianvil technique. The crystal structure of Ba₃P₅N₁₀Br:Eu²⁺ was solved and refined by single‐crystal X‐ray diffraction analysis and confirmed by Rietveld refinement and FTIR spectroscopy. Furthermore, spectroscopic luminescence measurements were performed. Through the synthesis of Ba₃P₅N₁₀Br:Eu²⁺, we have shown the great potential of nitridophosphate zeolites to serve as high‐performance luminescence materials.     

A Red‐Emissive Sextuple Hydrogen‐Bonding Self‐Assembly Molecular Duplex Bearing Perylene Diimide Fluorophores for Warm‐White Organic Light‐Emitting Diode Application

A novel sextuple hydrogen‐bonding (HB) self‐assembly molecular duplex bearing red‐emitting perylene diimide (PDI) fluorophores, namely PDIHB , was synthesized, and its molecular structure was confirmed by ¹H NMR, ¹³C NMR, TOF‐MS and 2D NMR. Compared with the small molecular reference compound PDI , PDIHB shows one time enhanced fluorescence efficiency in solid state (4.1% vs. 2.1%). More importantly, the presence of bulky HB oligoamide strands in PDIHB could trigger effective spatial separation between guest and host fluorophores in thin solid film state, hence inefficient energy transfer occurs between the blue‐emitting host 2TPhNIHB and red guest PDIHB in the 2 wt% guest/host blending film. As a result, a solution‐processed organic light‐emitting diode (OLED) with quite simple device structure of ITO/PEDOT:PSS (40 nm)/PVK (40 nm)/ PDIHB (2 wt%): 2TPhNIHB (50 nm)/LiF (0.8 nm)/Al (100 nm) could emit bias‐independent warm‐white electroluminescence with stable Commission Internationale de L'Eclairage coordinates of (0.42, 0.33), and the maximum brightness and current efficiency of this device are 260 cd·m^?2 and 0.49 cd·A^?1, respectively. All these results indicated that HB self‐assembly supramolecular fluorophores could act as prospective materials for white OLED application.     

TCNQ Interlayers for Colloidal Quantum Dot Light‐Emitting Diodes

CdSe/CdS/ZnS quantum dot light‐emitting diodes (QD‐LEDs) show increased brightness (from ca. 18 000 to 27 000 cd m^?2) with 7,7,8,8‐tetracyanoquinodimethane (TCNQ) between the QD and electron‐transfer layers of ZnO nanoparticles. As QD/ZnO layers are known to have interface defects, our finding leads to the importance of interface engineering for QD‐LEDs. Although the photoluminescent intensity and decay lifetime of ZnO/TCNQ/QD layers are similar to those of ZnO/QD layers, cyclic voltammetry suggests improved charge transfer of TCNQ/ZnO layers compared to that of pure ZnO layers. This helps us to understand the mechanism of electrically driven QD‐LED behavior, which differs from that of conventional solid‐state LEDs, and enables the rational design of QD‐based optoelectronic devices.     

Influence of Doping Different Rare Earth Ions on the Luminescence of CaTiO3‐based Phosphors

This paper reports the Gd³⁺, Dy³⁺, Tb³⁺ and Lu³⁺ doped CaTiO₃ based phosphors were synthesized by modified solid‐state reaction method and its crystal structure and luminescent properties were investigated. The X‐ray diffraction patterns (XRD) showed that the phosphors sintered at 1000 °C for 2 h were a pure CaTiO₃ phases. The optimization of reaction conditions were carried out by thermal gravimetry and differential thermal analysis methods (DTA/TG). Surface and elemental analyses were performed by using on SEM instrument. The excitation and emission spectras were recorded by photoluminescence spectrophotometer (PL).     

Novel Composites of Graphitic‐phase Nitrogen Carbon/Lanthanide Coordination Polymers as White Light‐emitting Phosphor

Lanthanide coordination polymers (Ln‐CPs) are excellent candidates for designing white light materials due to their adjustable fluorescent characteristic by decorating organic ligands, changing metal centers and including guests. However, low quantum yield, weak blue emission, high prices and supply risks have hindered the application and developments of the pure Ln‐CPs materials. Herein, we have designed a new white color composite material capable of white light‐emission upon excitation at 338 nm, which fabricated by compositing a graphitic‐phase nitrogen carbon (g‐C₃N₄) treated with nitric acid and lanthanide‐based complexes, with the photoluminescencequantum yield (QY) in solid state reaching 11.7 %. WLEDs constructed by depositing the (g‐C₃N₄)_0.783/Eu_0.133/Tb_0.083‐dbpt [dbpt = 3‐(3,5‐dicarboxylphenyl)‐5‐(pyrazinyl)‐1H‐1,2,4‐triazole] composites on a commercial UV LED chip feature a CIE chromaticity coordinate at (0.33, 0.33), high color rendering index (CRI) of 94.6. Compared to conventional white light‐emission Ln‐CPs materials of La_0.928Eu_0.045Tb_0.027‐dbpt and La_0.896Eu_0.104‐dbpt reveals that (g‐C₃N₄)_0.783/Eu_0.133/Tb_0.083‐dbpt composites have higher QY and CRI values.     

Site‐Selective Occupancy of Eu2+ Toward Blue‐Light‐Excited Red Emission in a Rb3YSi2O7:Eu Phosphor

Establishing an effective design principle in solid‐state materials for a blue‐light‐excited Eu²⁺‐doped red‐emitting oxide‐based phosphors remains one of the significant challenges for white light‐emitting diodes (WLEDs). Selective occupation of Eu²⁺ in inorganic polyhedra with small coordination numbers results in broad‐band red emission as a result of enhanced crystal‐field splitting of 5d levels. Rb₃YSi₂O₇:Eu exhibits a broad emission band at λ_max=622 nm under 450 nm excitation, and structural analysis and DFT calculations support the concept that Eu²⁺ ions preferably occupy RbO₆ and YO₆ polyhedra and show the characteristic red emission band of Eu²⁺. The excellent thermal quenching resistance, high color‐rendering index R_a (93), and low CCT (4013 K) of the WLEDs clearly demonstrate that site engineering of rare‐earth phosphors is an effective strategy to target tailored optical performance.     

Eu2+ & Mn2+‐Coactivated Ba3Gd(PO4)3 Orange‐Yellow‐Emitting Phosphor with Tunable Color Tone for UV‐Excited White LEDs

A novel orange‐yellow‐emitting Ba₃Gd(PO₄)₃:x Eu²⁺,y Mn²⁺ phosphor is prepared by high‐temperature solid‐state reaction. The crystal structure of Ba₃Gd(PO₄)₃:0.005 Eu²⁺,0.04 Mn²⁺ is determined by Rietveld refinement analysis on powder X‐ray diffraction data, which shows that the cations are disordered on a single crystallographic site and the oxygen atoms are distributed over two partially occupied sites. The photoluminescence excitation spectra show that the developed phosphor has an efficient broad absorption band ranging from 230 to 420 nm, perfectly matching the characteristic emission of UV‐light emitting diode (LED) chips. The emission spectra show that the obtained phosphors possess tunable color emissions from yellowish‐green through yellow and ultimately to reddish‐orange by simply adjusting the Mn²⁺ content (y) in Ba₃Gd(PO₄)₃:0.005 Eu²⁺,y Mn²⁺ host. The tunable color emissions origin from the change in intensity between the 4f–5d transitions in the Eu²⁺ ions and the ⁴T₁‐⁶A₁ transitions of the Mn²⁺ ions through the energy transfer from the Eu²⁺ to the Mn²⁺ ions. In addition, the mechanism of the energy transfer between the Eu²⁺ and Mn²⁺ ions are also studied in terms of the Inokuti–Hirayama theoretical model. The present results indicate that this novel orange‐yellow‐emitting phosphor can be used as a potential candidate for the application in white LEDs.     

Strong f‐f Excitation and Bright Red Emission in Cd4Gd1‐xEuxO(BO3)3 (0≤x≤1): Near‐UV LED Pumped Red Phosphor with Low Thermal Quenching

Searching efficient red phosphors under near‐UV or blue light excitation is practically important to improve the current white light‐emitting diodes (WLEDs). Eu²⁺‐ and Mn⁴⁺‐based red phosphors have been extensively studied. Here we proposed that Eu³⁺ is also a promising activator when it resides on a noncentrosymmetric coordination site. We proved that Cd₄GdO(BO₃)₃ is a good host, which has a significantly distorted coordination for Eu³⁺. A careful crystallographic study was performed on the solid solutions of Cd₄Gd_1‐xEu_xO(BO₃)₃ (0≤x≤1) by Rietveld refinements. The as‐doped Eu³⁺ cations locate at the Gd³⁺ site and are well separated by CdO₈, CdO₆ and BO₃ groups; thus, only a slight concentration quenching was observed at ≈80 atom % Eu³⁺. Most importantly, the parity‐forbidden law of 4f‐4f transitions for Eu³⁺ are severely depressed, thus the absorptions at ≈393 and ≈465 nm are remarkable. Cd₄Gd_0.2Eu_0.8O(BO₃)₃ can be pumped by a 395 nm LED chip to give a bright red emission, and when mixed with other commercial blue and green phosphors, it can emit the proper white light (0.3657, 0.3613) with a suitable R_a≈87 and correlated colour temperature ≈4326 K. In‐situ photoluminescence study indicated the low thermal quenching of these borate phosphors, especially under 465 nm excitation. Our case proves the practicability to develop near‐UV excited red phosphors in rare‐earth‐containing borates.     

Highly Efficient Visible‐to‐NIR Luminescence of Lanthanide(III) Complexes with Zwitterionic Ligands Bearing Charge‐Transfer Character: Beyond Triplet Sensitization

Two zwitterionic‐type ligands featuring π–π* and intraligand charge‐transfer (ILCT) excited states, namely 1,1′‐(2,3,5,6‐tetramethyl‐1,4‐phenylene)bis(methylene)dipyridinium‐4‐olate (TMPBPO) and 1‐dodecylpyridin‐4(1 H)‐one (DOPO), have been prepared and applied to the assembly of lanthanide coordination complexes in an effort to understand the ligand‐direction effect on the structure of the Ln complexes and the ligand sensitization effect on the luminescence of the Ln complexes. Due to the wide‐band triplet states plus additional ILCT excitation states extending into lower energy levels, broadly and strongly sensitized photoluminescence of f→f transitions from various Ln³⁺ ions were observed to cover the visible to near‐infrared (NIR) regions. Among which, the Pr, Sm, Dy, and Tm complexes simultaneously display both strong visible and NIR emissions. Based on the isostructural feature of the Ln complexes, color tuning and single‐component white light was achieved by preparation of solid solutions of the ternary systems Gd‐Eu‐Tb (for TMPBPO) and La‐Eu‐Tb and La‐Dy‐Sm (for DOPO). Moreover, the visible and NIR luminescence lifetimes of the Ln complexes with the TMPBPO ligand were investigated from 77 to 298 K, revealing a strong temperature dependence of the Tm³⁺ (³H₄) and Yb³⁺ (²F_5/2) decay dynamics, which has not been explored before for their coordination complexes.     

Strong Single‐Band Blue Emission from Colloidal Ce3+/Tm3+‐Doped NaYF4 Nanocrystals for Light‐Emitting Applications

An intense single‐band blue emission at λ=450 nm is observed from Tm³⁺ ions through Ce³⁺ sensitization, for the first time, in colloidal Ce³⁺/Tm³⁺‐doped NaYF₄ nanocrystals. The intense Tm³⁺ emission through broad‐band excitation is advantageous for developing luminescent nanocomposites because they can be easily incorporated into polymers. The composites can easily be coated over UV light‐emitting diodes (LEDs) to develop phosphor‐based blue LEDs.     

Spiral‐Type Heteropolyhedral Coordination Network Based on Single‐Crystal LiSrPO4: Implications for Luminescent Materials

Novel structures of luminescent materials, which are used as light sources for next‐generation illumination, are continuously being improved for use in white‐light‐emitting diodes. Activator‐doped known structures are reported as habitual down‐conversion phosphors in solid‐state lightings and displays. Consequently, the intrinsic qualities of the existent compounds produce deficiencies that limit their applications. Herein we report a spiral‐network single‐crystal orthophosphate (LiSrPO₄) prepared in a platinum crucible with LiCl flux through crystal‐growth reactions of SrCl₂ and Li₃PO₄ in air. It crystallizes in a hexagonal system with a=5.0040(2) and c=24.6320(16) Å, V=534.15(5) ų, and Z=6 in the space group P6₅. The unit cell is comprised of LiO₄ and PO₄ tetrahedrons that form a three‐dimensional LiPO₄^2? anionic framework with a helical channel structure along the c axis in which the Sr²⁺ cation is accommodated. The optical band gap of this composition is about 3.65 eV, as determined by using UV/Vis absorption and diffuse reflection spectra. We used the crystal‐growth method to synthesize blue‐ and red‐emitting crystals that exhibited pure color, low reabsorption, a large Stokes shift, and efficient conversion of ultraviolet excitation light into visible light. Emphasis was placed on the development of gratifying structure‐related properties of rare‐earth luminescent materials and their applications.