Influence of surfactants on the fading of malachite green

The kinetics of the reaction between malachite green (MG) and sodium hydroxide (MG fading) was studied using a spectrophotometric method in the presence of two cationic surfactants, cetyl-benzyl-dimethyl-ammonium chloride (CBDAC) and hexadecyl-trimethylammonium bromide (HTAB) and one anionic surfactant, sodium dodecyl sulphate (SDS) at concentrations below and above critical micellar concentrations. The cationic surfactants have a catalytic effect, while the anionic surfactant has an inhibitory effect on the reaction. A kinetic model describing the influence of surfactant on reaction rate was developed. The results are discussed on the basis of electrostatic and hydrophobic interactions between the kinetic micelles and malachite green.      

Synthesis and aqueous solution properties of homologous gemini surfactants with different head groups

A series of homologous gemini surfactants possessing identical hydrophobic chains but different ionic head groups (cationic, anionic, zwitterionic) were synthesized, and their aqueous solution properties were examined. The results showed that the surface activities of gemini surfactants are superior to those of corresponding conventional monomeric surfactants, and molecular arrangements of gemini surfactants at the air-water interface are tighter than those of corresponding conventional surfactants. It was also found that zwitterionic gemini surfactant possesses the highest surface activity among the three surfactants. The behavior at the air-water interface is closely related to the molecular structural features of surfactants, which provide an indication for synthesizing highly-efficient surfactants.      

Alkaline hydrolysis of brilliant green in mixed cationic surfactant systems

Kinetic measurements were performed for the alkaline hydrolysis of brilliant green — a triphenylmethane dye used as a model compound for probing micellar rate effects. This reaction was studied both in the presence of tetradecyltrimethylammonium bromide (TTAB) and tetradecyltriphenylphosphonium bromide (TTPPBr) and also in binary mixtures of these surfactants at different mole fractions of each. All rate surfactant profiles were analyzed using the pseudo-phase model in order to obtain the regression parameters, including binding constants and rate constants in the micellar pseudo-phase. The reaction was catalyzed by both surfactants. The catalytic factor increases from about 10 for pure TTPPBr to about 38 for pure TTAB. Binding of BG to micellar surface is greater in pure TTAB than in pure TTPPBr but significantly reduced in the surfactant mixtures than in pure components. Reduction of the binding constant becomes more significant as the mole fraction of TTAB is increased in the mixture. The kinetic data have been analyzed in terms of models of Piszkiewicz and Raghavan-Srinivasan which are in good agreement.      

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Recent development in capillary ion chromatography technology

This review summarizes the development of capillary ion chromatography (CIC) over approximately the last 5 years. It mainly focuses on the technologic aspects of several key components associated with CIC, including micropump, microscale electrodialytic eluent generator, microscale suppressor and the detector.      

Methylcellulose/SiO<Subscript>2</Subscript> hybrids: sol-gel preparation and characterization by XRD,FTIR and AFM

Methylcellulose (MC) / SiO₂ organic / inorganic hybrid materials have been prepared from MC and methyltriethoxysilane or ethyltrimethoxysilane, and characterized by XRD, FTIR and AFM. XRD showed peak shifts. FTIR shows intermolecular hydrogen bonding between MC and SiO₂. AFM depicts surface roughness which depends on the silica precursor and MC content.      

Ionic liquids - deanol derivatives as the Diels-Alder reaction solvents

The Diels-Alder reaction between cyclopentadiene and dienophiles in deanol derivatives containing bis(trifluoromethylsulfonyl)imide anion as media have been studied. The effect of the substituents attached to the cation on the endo:exo selectivity as well as the reaction yield have been evaluated in the absence and presence of Lewis acid catalyst - Y(OTf)₃. Catalytic activity of metal triflates and the recycling of chosen catalytic systems have also been investigated      

Asymmetric transfer hydrogenation of prochiral ketones catalyzed by aminosulfonamide-ruthenium complexes in ionic liquid

Chiral aminosulfonamides containing imidazolium group were used as ligands for the ruthenium(II)-catalyzed asymmetric transfer hydrogenation of prochiral ketones in ionic liquid, affording good to excellent conversions and enantiomeric excesses. The catalytic system could be easily recovered and reused several times.      

Preparation and examination of multilayer graphene nanosheets by exfoliation of graphite in high efficient attritor mill

Graphene multilayers have been prepared by mechanical method based on milling graphite in high efficient attritor mill. The results showed that the best dispersion media is ethanol, and 10 hours of intensive milling proved to be the most efficient way to separate the graphite layers as it was shown by scanning electron microscopy and X-ray diffraction measurements.      

Efficient Lewis acid-assisted Br?nsted acid (LBA) catalysis in the iron-catalyzed Friedel-Crafts alkylation reaction of indoles

Lewis acid-assisted Br?nsted acid (LBA) catalysis was proposed for the iron-catalyzed Friedel-Crafts alkylation of indoles with chalcones. This proposal was supported by the ESI-MS and cyclic voltammetry. The addition of acac to the iron-catalyzed Friedel-Crafts alkylation of indoles with chalcones created a powerful catalytic system, which makes the alkylation reactions occur easily under mild conditions.      

Synthesis of fluorescent long-chain thiols/disulfides as building-blocks for self-assembled monolayers preparation

New symmetrical disulfides together with the corresponding thiols bearing fluorescent end-groups have been synthesized as building-blocks for self-assembled monolayers (SAMs). The synthesis has been accomplished starting from aromatic nitrogen heterocycles in three steps. The conversion of the tosylated intermediate into the final disulfide is accomplished by use of sodium hydrogen sulfide (NaSH). Both products (thiols and disulfides) were isolated and characterized.      

Fabrication and magnetic properties of hierarchical nickel microwires with nanothorns

Hierarchical nickel microwires with nanothorns were fabricated through a reduction of nickelous salt with hydrazine in diethanolamine. The product was characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDS). The growth mechanism of the nickel microwires with nanothorns is proposed, based on the evolution of the structures and morphologies, which could be ascribed to the cooperative effect of the complexant of diethanolamine and inherent magnetic interactions. Magnetic properties of the product were measured at room temperature and compared with other shaped counterparts.      

Efficient and solvent-free synthesis of 1-amidoalkyl-2-naphthols using <Emphasis Type="Italic">N,N,N’,N’</Emphasis>-tetrabromobenzene-1,3-disulfonamide

N,N,N,’N’-Tetrabromobenzene-1,3-disulfonamide [TBBDA] is found to be a reusable catalyst for efficient synthesis of various amidoalkyl naphthols from β-naphthol, aromatic aldehydes and urea in good to high yields under solvent-free conditions.      

One-pot, three-component condensation of 2-hydroxybenzaldehyde derivatives, primary amines with alkyl isocyanides to N-alkyl-2-(2-hydroxyphenyl)-2-imino-acetamides

One-pot, three-component condensation of 2-hydroxybenzaldehyde derivatives, primary amines with alkyl isocyanides is reported. N-alkyl-2-(2-hydroxyphenyl)-2-iminoacetamide derivatives are generated presumably via the preliminary formation of N, N′-disubstituted benzo[b]furan-2,3-diamines and subsequent oxidation with molecular oxygen.      

Removal of cadmium and copper ions by <Emphasis Type="Italic">Trichosporon cutaneum</Emphasis> R57 cells immobilized onto polyvinyl alcohol/tetraethoxysilane hybrid matrices

Polyvinyl alcohol (PVA) and tetraethoxysilane (TEOS) hybrid materials were prepared by sol-gel methods and tested as matrices for immobilization of Trichosporon cutaneum R57, capable of removing cadmium and copper ions from aqueous solutions. A kinetic model was applied and the effects of matrix TEOS content on the copper and cadmium uptake equilibria and rate constants were investigated.      

Fluorescent chemosensors for metal ions based on 3-(2-benzoxazol-5-yl)alanine skeleton

The ability of new chelate ligands, benzoxazol-5-yl-alanine derivatives substituted in position 2 by heteroaromatic substituent, to form complexes with selected metal ions in acetonitrile are studied by means of absorption and steady-state and time-resolved fluorescence spectroscopy. Among the ligands studied, only azaaromatic derivatives form stable complexes with transition metal ions in the ground state. Their absorption bands are bathochromically shifted enabling to use those ligands as ratiometric sensors. The fluorescence of each ligand is quenched by metal ions, however, in the presence of Cd(II) and Zn(II) ions a new red shifted emission band is observed.      

Cloud point extraction-preconcentration and flame atomic absorption spectrometric determination of low levels of zinc in water and blood serum samples

A simple, sensitive and selective flotation method is described for the preconcentration and atomic absorption spectrometric determination of zinc ion in water and blood samples. At a solution pH of 5.2, 4-(2-pyridylazo-resorcinol) and Triton X-114 were used as hydrophobic ligand and non-ionic surfactant, respectively. The chemical variables affecting the preconcentration process were optimized. Under the optimized experimental conditions, the selective preconcentration and determination of as low zinc concentration as 6.5 μg L⁻¹ can be made. The proposed method was successfully applied to the preconcentration and low-level determination of zinc in different water and blood serum samples.      

Kinetics and thermodynamics of adsorption of congo red on cellulose

Thermodynamics and kinetics of adsorption of congo red (CR) on cellulose are studied at 308–328 K. In the used concentration range of CR, interaction of CR with cellulose is exothermic and CR molecules adsorb chemically on cellulose surface. The effects of contact time, temperature and initial concentration of CR on kinetics of its adsorption on cellulose were investigated. The process proceeds according to the pseudo-second-order equation. Initial adsorption rate of adsorption is first-order in CR and the intraparticle diffusion of CR molecules within cellulose is identified as the main rate-limiting step.