Hg2+-mediated aggregation of gold nanoparticles for colorimetric screening of biothiols

In this work, we report a colorimetric assay for the screening of biothiols including glutathione (GSH), cysteine (Cys), and homocysteine (Hcys) based on Hg(2+)-mediated aggregation of gold nanoparticles (AuNPs). Hg(2+) can induce aggregation of thiol-containing naphthalimide (1) capped AuNPs due to the cross-linking interactions from the resulting "thymine-Hg(2+)-thymine" (T-Hg(2+)-T) analogous structure. When Hg(2+) is firstly treated with biothiols, followed by mixing with 1-capped AuNPs suspension, AuNPs undergo a transformation from an aggregation to a dispersion state depending on the concentration of biothiols. This anti-aggregation or re-dispersion of AuNPs is due to the higher affinity of Hg(2+) for biothiols relative to compound 1. The corresponding color variation in the process of anti-aggregation of AuNPs can be used for the quantitative screening of biothiols through UV-vis spectroscopy or by the naked eye. Under optimized conditions, a good linear relationship in the range of 0.025-2.28 μM is obtained for GSH, 0.035-1.53 μM for Cys, and 0.040-2.20 μM for Hcys. The detection limits of this assay for GSH, Cys, and Hcys are 17, 9, and 18 nM, respectively. This colorimetric assay exhibits a high selectivity and sensitivity with tunable dynamic range. The proposed method has been successfully used in the determination of total biothiol content in human urine samples.     

A selective,sensitive and label-free visual assay of fructose using anti-aggregation of gold nanoparticles as a colorimetric probe

A new convenient colorimetric sensor for fructose based on anti-aggregation of citrate-capped gold nanoparticles(Au NPs) is presented. 4-Mercaptophenylboronic acid(MPBA) induces the aggregation of Au NPs, leading to a color change from red to blue. Fructose as a potent competitor has strong affinity for MPBA and a borate ester is formed between MPBA and fructose. There is an obvious color change from blue to red with increasing the concentration of fructose. The anti-aggregation effect of fructose on Au NPs was seen by the naked eye and monitored by UV–vis spectra. Our results showed that the absorbance ratio(A_(519)/A_(640)) was linear with fructose concentration in the range of 0.032–0.96 μmol/L(R~2= 0.996), with a low detection limit of 0.01 μmol/L(S/N = 3). Notably, a highly selective recognition of fructose was shown against other monosaccharide and disaccharide(glucose, mannose, galactose,lactose and saccharose). With anti-aggregation assays higher selectivity is achievable. The results of this work provide a rapid method for evaluating the quantitative analysis of fructose in human plasma at physiologically meaningful concentrations and at neutral pH. The proposed procedure can be used as an efficient method for the precise and accurate determination of fructose.     

Highly selective and sensitive visualizable detection of Hg2+ based on anti-aggregation of gold nanoparticles

For the widely used gold nanoparticles (AuNPs)-based colorimetric probes, AuNPs generally change from dispersion to aggregation state accompanying with corresponding color turning from red to blue. Although colorimetric probes based on the anti-aggregation of AuNPs show exceptional selectivity and sensitivity, few examples have been reported in literature. A facile but highly sensitive and selective colorimetric probe based on the anti-aggregation of AuNPs transferred from the deactivation of aggregation agent 4,4′-dipyridyl by Hg²⁺ was developed in this work. This reported probe is suitable for real-time detection of Hg²⁺ in water with a detection limit of 3.0 ppb for Hg²⁺, and exhibits a selectivity toward Hg²⁺ by two orders of magnitude over other metal ions. The dynamic range of this probe can be conveniently tuned by adjusting the amount of 4,4′-dipyridyl used.     

Surface reaction strategy for Raman probing trace cadmium ion

Prevalent contamination of water by cadmium ion (Cd²⁺) brings environmental risk, which threatening to human health including renal dysfunction, reduced lung capacity, and some cancers. It calls for rapid, sensitive and selective protocol to analyze Cd²⁺ on field. In this work, specific Raman probe is rationally designed by gold nanoparticles (AuNPs) functionalized with tripeptide glutathione (GSH) and Rhodamine 6G (R6G) (denoted as R6G/GSH/AuNPs), which is explored for indirectly determining trace Cd²⁺ in river water. Based on chelating interaction between GSH and Cd²⁺ to form tetrahedral Cd(SG)_4, which trends easy detachment from R6G/GSH/AuNPs. With increasing Cd²⁺ concentration, the Raman probe without protection of GSH happens due aggregation and Raman signal of R6G increases correspondingly. The R6G/GSH/AuNPs-based Raman detection of Cd²⁺ in river water shows rapidness, excellent sensitivity, selectivity and good repeatability. Limit of detection of 10 ppb with a widely linear range of 0.5–20 ppm could be achieved. It could be perspective that such Raman probe could be extended to be used for on-site monitoring trace Cd²⁺ in river water system.     

N-1-(2-mercaptoethyl)thymine modification of gold nanoparticles: a highly selective and sensitive colorimetric chemosensor for Hg2+

An approach for mercury ions (Hg(2+)) sensing based on the Hg(2+)-induced aggregation of thymine (T)-SH-functionalized gold nanoparticles (AuNPs) has been reported. The T-SH ligands that we synthesized can easily be coupled to the surface of AuNPs through the Au-S bond and can recognize Hg(2+) with high selectivity by forming a T-Hg-T complex with strong affinity. For the T-SH-functionalized AuNPs (T-S-AuNPs) sensor, upon addition of Hg(2+), the formation of the T-Hg-T complex induces aggregation of T-S-AuNPs and results in a significant change of color and UV-Vis absorption spectra. Thus, our method can be used for the rapid, easy and reliable screening of Hg(2+) in aqueous solution, with high sensitivity (2.8 nM) and selectivity over competing analytes. The developed method is successfully applied to the sensing of Hg(2+) in real environmental samples.     

A colorimetric sensor array for detection and discrimination of biothiols based on aggregation of gold nanoparticles

Developments of sensitive, rapid, and cheap systems for identification of a wide range of biomolecules have been recognized as a critical need in the biology field. Here, we introduce a simple colorimetric sensor array for detection of biological thiols, based on aggregation of three types of surface engineered gold nanoparticles (AuNPs). The low-molecular-weight biological thiols show high affinity to the surface of AuNPs; this causes replacement of AuNPs’ shells with thiol containing target molecules leading to the aggregation of the AuNPs through intermolecular electrostatic interaction or hydrogen-bonding. As a result of the predetermined aggregation, color and UV–vis spectra of AuNPs are changed. We employed the digital mapping approach to analyze the spectral variations with statistical and chemometric methods, including hierarchical cluster analysis (HCA) and principal component analysis (PCA). The proposed array could successfully differentiate biological molecules (e.g., cysteine, glutathione and glutathione disulfide) from other potential interferences such as amino acids in the concentration range of 10–800 μmol L⁻¹.     

Size-dependence enhancement in electrocatalytic activity of NiHCF-gold nanocomposite: potential application in electrochemical sensing

A nanocomposite of nickel hexacyanoferrate (NiHCF) was made with gold nanoparticles (AuNPs) of two different sizes (20 and 80 nm as AuNP(red) and AuNP(blue) respectively), synthesized via 3-glycidoxypropyltrimethoxysilane mediated reduction of 3-aminopropyltrimethoxysilane treated gold chloride and characterized by scanning electron microscopy and UV-VIS spectroscopy. The size of AuNPs was found to influence the two pairs of reversible voltammetric peaks of cation rich and cation deficient NiHCF. Such influence was identified from cyclic voltammetry of nanocomposite modified electrodes and applications during electrochemical sensing of two different analytes hydrazine and glutathione (GSH). Electrochemical sensing of hydrazine was based on cyclic voltammetry and differential pulse voltammetry (DPV) found as a function of sodium deficient NiHCF and was greatly amplified with increasing AuNPs nanogeometry. NiHCF alone is not an efficient electrode material for GSH analysis at the level required, however, the presence of AuNPs introduces size dependent sensitive and selective detection of GSH. GSH sensing based on linear sweep voltammetry (LSV) was found to be mediated by the potassium rich form of NiHCF redox couple in the presence of AuNPs. The results justified electrochemical detection of these analytes based on a mediated mechanism and support the role of AuNPs for facilitated electrochemical activity of NiHCF based systems as a function of nanogeometry.     

Sodium hydroxide as pretreatment and fluorosurfactant-capped gold nanoparticles as sensor for the highly selective detection of cysteine

A sensor for detecting cysteine (Cys) in a solution of fluorosurfactant (FSN)-capped gold nanoparticles (AuNPs) has been developed. Under acidic conditions, FSN-capped AuNPs are aggregated in the presence of homocysteine (HCys) and Cys but not in the presence of cysteinylglycine, glutathione, and gamma-glutamycysteine. When adding NaOH to a solution of HCys, the five-membered ring transition state is formed through intramolecular hydrogen abstraction. By contrast, it is difficult for Cys to form a four-membered ring transition state after Cys has been pretreated with NaOH. As a result, the HCys-induced aggregation of the FSN-capped AuNPs is suppressed because the five-membered ring transition state exhibits relatively larger steric hindrance and has stronger interaction with the FSN molecules. Thus, we can discriminate between Cys and HCys on the basis of different aggregation kinetics. Under the optimum condition, the selectivity of the probe for Cys in aqueous solutions is remarkably high over the other aminthiols. Note that HCys and Cys have very similar structure and pK(a) value. We have validated the applicability of our method through the analyses of Cys in urine samples. It is believed that this approach has great potential for the detection of Cys in biological samples.     

基于谷胱甘肽抑制纳米金催化3,3’,5,5’-四甲基联苯胺与过氧化氢反应比色检测谷胱甘肽

采用具有类似过氧化物酶活性的金纳米粒子(AuNPs)催化四甲基联苯胺(TMB)-H2O2反应,氧化产物(oxTMB)被谷胱甘肽(GSH)还原成TMB,导致吸光度下降,颜色由蓝色变为无色。利用上述现象,设计了一种超灵敏检测谷胱甘肽的比色传感器。在10 pmol/L~10μmol/L范围内,吸光度随GSH浓度呈良好的线性降低关系,检出限为7.5 pmol/L。该方法可以定量检测人血清中的谷胱甘肽。     

纳米金颗粒增强信号的电化学生物传感器用于谷胱甘肽和半胱氨酸的检测

构建了一种高灵敏检测谷胱甘肽(GSH)和半胱氨酸(Cys)的新型电化学生物传感器. 先将富含T碱基的DNA1和DNA2探针分别修饰在金电极和纳米金颗粒(AuNPs)上, 再加入Hg²⁺, 通过形成T-Hg²⁺-T结构使AuNPs结合到金电极表面. 当加入GSH(或Cys)后, GSH(或Cys)可以竞争结合T-Hg²⁺-T结构中的Hg²⁺, 使AuNPs离开电极表面. 由于AuNPs上修饰的DNA探针能够静电吸附大量电活性物质六氨合钌(RuHex), 因此该过程可引起计时电量信号的显著变化, 据此实现了GSH(或Cys)的高灵敏检测. 该传感器的检出限达10 pmol/L, 比荧光法或比色法降低了2~3个数量级. 实验结果表明, 该传感器具有较好的选择性.     

Nonionic surfactant‐capped gold nanoparticles for selective enrichment of aminothiols prior to CE with UV absorption detection

In this study, we describe the use of Tween 20‐capped gold nanoparticles (AuNPs) as selective probes for the extraction of aminothiols from an aqueous solution. Tween 20 molecules noncovalently attached to the surface of AuNPs to form Tween 20–AuNPs were used for the selective extraction of aminothiols through the formation of Au–S bonds. After extraction and centrifugation, the aminothiols were detached from the surface of the AuNPs by adding DTT in a high concentration. We used this probe in combination with CE and UV absorption detection. On‐line concentration and separation of the released aminothiols were performed by using 1.6% v/v poly(diallyldimethylammonium chloride) as an additive in CE. Under optimal extraction and stacking conditions, the LOD at a S/N of 3 were 28, 554, and 456 nM for glutathione (GSH), cysteine (Cys), and homocysteine (HCys), respectively. In comparison with the normal injection without the extraction procedure, approximately 2280‐, 998‐, and 904‐fold improvements in the sensitivity were observed for GSH, Cys, and HCys, respectively. We have validated the application of our method on the basis of the analysis of GSH and HCys in human urine samples. It is believed that this approach has significant potential to be extended to clinical diagnosis.     

Highly sensitive and selective colorimetric sensors for uranyl (UO2(2+)): development and comparison of labeled and label-free DNAzyme-gold nanoparticle systems

Colorimetric uranium sensors based on uranyl (UO2(2+)) specific DNAzyme and gold nanoparticles (AuNP) have been developed and demonstrated using both labeled and label-free methods. In the labeled method, a uranyl-specific DNAzyme was attached to AuNP, forming purple aggregates. The presence of uranyl induced disassembly of the DNAzyme functionalized AuNP aggregates, resulting in red individual AuNPs. Once assembled, such a "turn-on" sensor is highly stable, works in a single step at room temperature, and has a detection limit of 50 nM after 30 min of reaction time. The label-free method, on the other hand, utilizes the different adsorption properties of single-stranded and double-stranded DNA on AuNPs, which affects the stability of AuNPs in the presence of NaCl. The presence of uranyl resulted in cleavage of substrate by DNAzyme, releasing a single stranded DNA that can be adsorbed on AuNPs and protect them from aggregation. Taking advantage of this phenomenon, a "turn-off" sensor was developed, which is easy to control through reaction quenching and has 1 nM detection limit after 6 min of reaction at room temperature. Both sensors have excellent selectivity over other metal ions and have detection limits below the maximum contamination level of 130 nM for UO2(2+) in drinking water defined by the U.S. Environmental Protection Agency (EPA). This study represents the first direct systematic comparison of these two types of sensor methods using the same DNAzyme and AuNPs, making it possible to reveal advantages, disadvantages, versatility, limitations, and potential applications of each method. The results obtained not only allow practical sensing application for uranyl but also serve as a guide for choosing different methods for designing colorimetric sensors for other targets.     

Conjugated Polyelectrolyte-Ag+ Fluorescent Switch for Biothiol Sensing

A new "off-on" switch for sensitive and selective fluorescence detection of biothiols[glutathione(GSH), cysteine(Cys) and homocysteine(Hcy)] was developed based on an anionic conjugated polyelectrolyte(CPE), pyridyl-functionalized poly(phenylene ethynylene)(P1). The fluorescence of P1 can be significantly quenched by Ag⁺ due to complexation-mediated interpolymer aggregation. Furthermore, biothiols can efficiently recover the fluorescence intensity of P1 as a result of the stronger binding between thiol group and Ag⁺, which dissociates P1 from the P1/Ag⁺ complex and disrupts interpolymer aggregation. Under optimum conditions, a good linear relationship in a range of 100―4200 nmol/L is obtained for GSH with a detection limit of 80 nmol/L(S/N=3). As a result of specific interaction between the thiol group and Ag⁺, the proposed method shows a high selectivity for biothiols. In addition, the CPE-based fluorescence "off-on" switch has been used to quantitatively detect total biothiols in cell lysates.     

Iminodiacetic acid-functionalized gold nanoparticles for optical sensing of myoglobin via Cu2+ coordination

A novel gold nanoparticle (AuNP)-based optical sensing system has been developed for the detection of myoglobin (Mb), which is of significant importance for early disease diagnosis. Two thiol molecules containing an iminodiacetic acid moiety (IDA) were synthesized. This detection is based on the Mb-induced aggregation of IDA-functionalized AuNPs resulting from the structures of Mb sandwiched between the functionalized AuNPs via Cu(2+) bridges in the coordination interactions of IDA-Cu(2+)-histidine residues available on the Mb surface, which was confirmed by UV-vis spectroscopy, transmission electron microscopy, dynamic light scattering, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The induction aggregation resulted in a red shift in plasmon resonance band of the AuNPs concomitant with a change in solution color from red to purple. The qualitative and quantitative detections of Mb can be achieved by colorimetric observations and UV-vis spectral measurements, respectively. The selectivity of protein assay with the functionalized AuNPs was further investigated, and it is found that the optical sensing of histidine-rich proteins is closely related to number and distribution of surface histidine residues as well as size of proteins.     

Label-free colorimetric sensing of ascorbic acid based on Fenton reaction with unmodified gold nanoparticle probes and multiple molecular logic gates

A label-free strategy based on Fenton reaction with unmodified gold nanoparticles (AuNPs) as probe is demonstrated for ascorbic acid (AA) sensing. AuNPs is stable in the presence of single stranded DNA (ssDNA) which prevents salt-induced aggregation of AuNPs in solution. The hydroxyl free radicals generated by Fenton reaction lead to ssDNA cleavage into different sequence fragments which induce aggregation of AuNPs to produce a red-to-blue color change. As an efficient biological antioxidant, AA could effectively scavenge free radicals to avoid the cleavage of ssDNA, so that it prevents color change of the AuNPs solution. Thus, the color change of AuNPs in the presence and absence of AA provides a new approach for the detection of AA. The absorbance ratio at two wavelengths, A₆₇₀/A₅₂₀, decreases linearly with AA content within 1–15 μM, giving rise to a detection limit of 0.3 μM and a RSD of 2.8% (10 μM). The color display of AuNPs solution makes it feasible for the estimation of AA content by naked eye visualization. Moreover, based on Fenton reaction and unmodified gold nanoparticles, a multiple logic gate system includes two logic operations, i.e., INHIBIT and NOR, has been designed with small molecules (AA, l-cysteine, glutathione) as inputs and the colorimetric changes of AuNPs solution as outputs.     

Using nile red-adsorbed gold nanoparticles to locate glutathione within erythrocytes

An aqueous solution of Nile Red (NR)-absorbed 32-nm gold nanoparticles (AuNPs) have been used to sense glutathione (GSH). When the NR product is displaced by GSH on the AuNP surface, the fluorescence of the solution increases and the AuNPs aggregate. To determine the concentration and distribution of GSH within erythrocyte cells, a homemade fluorescence and scattering microscope was constructed. This system allows monitoring, within individual cells, of the uptake and transportation of the NRAuNPs and the displacement of the NR product from the NRAuNP surface by GSH. The fluorescence and scattering images clearly indicate the location of GSH inside the cells; these findings are supported by images recorded using 2,3-naphthalenedicarboxaldehyde, which is a highly selective fluorogenic reagent for GSH. Microscopic fluorescence measurements of the NRAuNPs revealed that the GSH concentration inside erythrocyte cells is 1.30 +/- 0.31 mM. To confirm this result, lysed erythrocyte cells were analyzed by applying capillary electrophoresis in conjunction with laser-induced fluorescence using NRAuNPs; accordingly, the average GSH concentration in a single erythrocyte cell was determined to be 1.32 +/- 0.06 mM.     

Colorimetric detection of mercury(II) in a high-salinity solution using gold nanoparticles capped with 3-mercaptopropionate acid and adenosine monophosphate

A new colorimetric sensor for sensing Hg2+ in a high-salinity solution has been developed using gold nanoparticles (AuNPs) decorated with 3-mercaptopropionate acid (MPA) and adenosine monophosphate (AMP). Because of the high negative charge density of AMP on each AuNP surface, MPA/AMP-capped AuNPs are well dispersed in a high-salt solution. In contrast, the aggregation of MPA-capped AuNPs was induced by sodium ions, which shield the negative charges of the carboxylic groups of MPA. Through the coordination between the carboxylic group of MPA and Hg2+, the selectivity of MPA/AMP-capped AuNPs for Hg2+ in a high-salt solution is remarkably high over that of the other metals without the addition of a masking agent or a change in the temperature. We have carefully investigated the effect of the AMP concentration on the stability and sensitivity of MPA/AMP-capped AuNPs. Under optimum conditions, the lowest detectable concentration of Hg2+ using this probe was 500 nM on the basis of the measurement of the ratio of absorption at 620 nm to that at 520 nm. The sensitivity to Hg2+ can be further improved by modifying the MPA/AMP-capped AuNPs with highly fluorescent rhodamine 6G (R6G). By monitoring the fluorescence enhancement, the lowest detectable concentration of Hg2+ using R6G/MPA/AMP-capped AuNPs was 50 nM.     

Nanohybrid Comprising Gold Nanoparticles – MoS2 Nanosheets for Electrochemical Sensing of Folic Acid in Serum Samples

Folic acid (FA) deficiency is associated with several clinical conditions such as megaloblastic anemia, neuropsychiatric, and pregnancy-related syndromes, this makes FA an important metabolite to be monitored. We have fabricated an electrochemical biosensor based on gold nanoparticles decorated molybdenum disulfide nanosheets (AuNPs−MoS₂NSs) nanocomposite as a transducer matrix for specific and rapid electrochemical detection of FA. Differential pulse voltammetry (DPV) studies displayed a rapid analytical response of the fabricated AuNPs−MoS₂NSs/GCE sensor probe towards FA in a wide concentration range of 0.001–100 μM with a very low detection limit of 0.72±0.03 nM. The selectivity of the fabricated sensor probe has been examined in the presence of interferents such as dopamine, uric acid, ascorbic acid, glucose, and urea. The clinical potential of the fabricated biosensor was established by monitoring FA in human serum samples. The developed AuNPs−MoS₂NSs/GCE sensor probe showed high reproducibility and stability, indicating its promise for FA detection in clinical settings.     

Selective enrichment of aminothiols using polysorbate 20-capped gold nanoparticles followed by capillary electrophoresis with laser-induced fluorescence

In this article, we report a simple method for selective enrichment of aminothiols using Tween 20-capped gold nanoparticles (AuNPs) prior to capillary electrophoresis coupled with laser-induced fluorescence (CE-LIF). Compared to citrate-capped AuNPs, Tween 20-capped AuNPs exhibit the ability to disperse in a highly saline solution and selectively extract aminothiols through the formation of Au–S bonds. After extraction and centrifugation, 1 mM thioglycollic acid (TGA) was utilized to remove aminothiols that attached to the NP surfaces. After a solution of 8.0 mL aminothiols were extracted using 2× AuNPs (200 μL), the extracted aminothiols derivatized with o-phthalaldehyde at pH 12.0 were detected by CE-LIF. As a result, the limits of detection at a signal-to-noise ratio of 3 for homocysteine (HCys), glutathione (GSH), and γ-glutamycysteine (Glu-cys) are 4013.2, 79.8, and 382.8 pM, respectively. The use of this probe provided approximately 11-, 282-, and 21-fold sensitivity improvements for HCys, GSH, and Glu-cys, respectively. A practical analysis of HCys, GSH, and Glu-cys in human urine sample has been accomplished by this present method.     

Au nanoparticles based ultra-fast “Turn-On” fluorescent sensor for detection of biothiols and its application in living cell imaging

Au or other metal nanostructures have the ability to strongly quench the fluorescence of fluorophores.This feature has made AuNP-conjugates attractive for the construction of platforms for various bioanalytes to overcome the limitations of small molecule fluorophores(poor solubility,long reaction time).In this paper,an ultrafast "Turn-On" fluo rescent sensor for biothiols was constructed.The sensor is based on the fluorescent resonance energy transfer(FRET) effect between the fluorophore(PN) and AuNPs,which effectively quenches the fluorescence of the fluorophore.In the presence of thiols,PN is displaced and released from AuNP surfaces,and thus,the fluorescence is rapidly restored.The sensor features appreciable water solubility and ultrafast response time(a few seconds for Cys).In addition,it exhibits high selectivity and a detection limit as low as 12 nmol/L for Hcy.Moreover,the sensor presents good biocompatibility and has been successfully applied for imaging biothiols in living cells.