Synthesis and Photovoltaic Properties of Formyl End-Capped Oligothiophenes

For the purpose of developing novel photovoltaic materials, 5,5″-biformyl-2,2′:5′,2″-terthiophene (OHC-3T-CHO) and 5,5″″-biformyl-2,2′:5′,2″:5″,2″′:5″′,2″″-q-uinquethiophene (OHC-5T-CHO) were synthesized. The photovoltaic properties of OHC-3T-CHO and OHC-5T-CHO were studied. We have fabricated two flexible organic photovoltaic devices using OHC-3T-CHO, OHC-5T-CHO, and 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA). The PET-ITO (indium tin oxides coated with polyethylene terephthalate)/OHC-3T-CHO/PTCDA/Al device has an open circuit voltage (V _oc ) of 1.12 V, and photoelectric conversion efficiency (PCE) of 1.00%, whereas the PET-ITO/OHC-5T-CHO/PTCDA/Al device has a V _oc of 1.78 V and PCE of 1.08%. Both devices have high V _oc (1.12 V and 1.78 V). It is possible that intermolecular hydrogen bonding between the –CHO group of OHC-nT-CHO and the carboxylic dianhydride of PTCDA enhanced the efficiency by promoting forward interfacial electron transfer.     

Organic photovoltaic devices with high open-circuit voltage based on oligothiophene derivatives

For the purpose of developing organic photovoltaic devices with good performance characteristics,we have fabricated twodevices using 4T-CHO,5T-CHO and PTCDA.The ITO/4T-CHO/PTCDA/Al device has a V_oc of 2.45 V and photoelectricconversion efficiency of 2.76%.The ITO/5T-CHO/PTCDA/Al device has a V_oc of 2.1 3V and photoelectric conversion efficiency of2.90%.The two devices have higher Voc(2.45 and 2.13 V).It is possible that intermolecular hydrogen bonding between-CHOgroup of nT-CHO and carboxylic dianhydride of PTCDA contribute to enhance the efficiency by promoting interfacial electrontransfer and eliminating the subconducting band trap sites.     

Synthesis and Photovoltaic Properties of Donor–Acceptor Oligothiophene Derivatives Possessing Mesogenic Properties

For the purpose of developing novel photovoltaic materials and organic photovoltaic devices with good performance characteristics, 5-cyano-2,2′:5′,2″-terthiophene (3T-CN) and 5-cyano-2,2′:5′,2″:5″,2″′-tetrathiophene (4T-CN) were synthesized. The 3T-CN and 4T-CN were donor–acceptor oligothiophene derivatives possessing mesogenic properties. The photovoltaic properties of 3T-CN and 4T-CN were studied. The rigid and flexible photovoltaic devices were fabricated using 3T-CN, 4T-CN, and 3,4,9,10-perylenetertracarboxylic dianhydride (PTCDA). The results showed that the -CN group played an important role in increasing short circuit current density (I _sc) and power conversion efficiency (PCE). Both rigid device glass-ITO/4T-CN/PTCDA/Al and flexible device PET-ITO (indium tin oxides coated with polyethylene terephthalate)/4T-CN/PTCDA/Al had greater I _sc and PCE compared with rigid device glass-ITO/4T/PTCDA/Al. It was possible that the -CN group, with strong electron-withdrawing character, and mesogenic properties of 4T-CN enhanced the efficiency by promoting forward interfacial electron transfer.      

Polyhydroxyoligothiophenes. 2. Hydrogen-Bonding-Oriented Solid State Conformation of 3,3'-Bis(2-hydroxyethyl)-2,2'-bithiophene and Regioselective Synthesis of the Corresponding Head-to-Head/Tail-to-Tail Quater- and Sexithiophene

This paper reports the X-ray structure of 3,3'-bis(2-hydroxyethyl)-2,2'-bithiophene (1), which is the building block for the synthesis of head-to-head/tail-to-tail 2-hydroxyethyl-substituted oligothiophenes. Contrary to all the bithiophenes reported so far, 1 exhibits a noncoplanar anti conformation and an inter-ring twist angle (67.5 degrees ) which is the largest ever measured for adjacent rings of alpha-conjugated oligothiophenes. This unusual conformation appears to be dictated by intermolecular hydrogen-bonding interactions involving the OH groups, which bind the molecule in close packed layers. The paper also describes the regioselective synthesis of the dimer and the trimer of 1, namely of 3,3',4",3"'-tetrakis(2-hydroxyethyl)-2,2':5',2":5",2"'-quaterthiophene (3c) and of 3,3',4",3"',4",3"'-hexakis(2-hydroxyethyl)-2,2':5',2":5",2"':5"',2":5",2"'-sexithiophene (4b). 3c And 4b were obtained through palladium(0)-catalyzed coupling of the mono- and distannanes of the tetrahydropyranyl derivative of 1 with the appropriate monobromo compound (Stille's reaction). Finally, the paper reports force-field calculations which suggest that the low lambda(max) values measured for 1, 3c, and 4b are also the result of intramolecular hydrogen-bonding interactions which favor highly twisted conformations in solution.     

Dye molecular structure device open-circuit voltage correlation in Ru(II) sensitizers with heteroleptic tridentate chelates for dye-sensitized solar cells

Dicarboxyterpyridine chelates with π-conjugated pendant groups attached at the 5- or 6-position of the terminal pyridyl unit were synthesized. Together with 2,6-bis(5-pyrazolyl)pyridine, these were used successfully to prepare a series of novel heteroleptic, bis-tridentate Ru(II) sensitizers, denoted as TF-11-14. These dyes show excellent performance in dye-sensitized solar cells (DSCs) under AM1.5G simulated sunlight at a light intensity of 100 mW cm(-2) in comparison with a reference device containing [Ru(Htctpy)(NCS)(3)][TBA](3) (N749), where H(3)tctpy and TBA are 4,4',4"-tricarboxy-2,2':6',2"-terpyridine and tetra-n-butylammonium cation, respectively. In particular, the sensitizer TF-12 gave a short-circuit photocurrent of 19.0 mA cm(-2), an open-circuit voltage (V(OC)) of 0.71 V, and a fill factor of 0.68, affording an overall conversion efficiency of 9.21%. The increased conjugation conferred to the TF dyes by the addition of the π-conjugated pendant groups increases both their light-harvesting and photovoltaic energy conversion capability in comparison with N749. Detailed recombination processes in these devices were probed by various spectroscopic and dynamics measurements, and a clear correlation between the device V(OC) and the cell electron lifetime was established. In agreement with several other recent studies, the results demonstrate that high efficiencies can also be achieved with Ru(II) sensitizers that do not contain thiocyanate ancillaries. This bis-tridentate, dual-carboxy anchor configuration thus serves as a prototype for future omnibearing design of highly efficient Ru(II) sensitizers suited for use in DSCs.     

Organic Photovoltaic Properties Based on Oligothiophenes

Organic photovoltaic devices have attracted a great attention because of their light weight and processability, and the ease of material design on the molecular level. There are a number of reports on organic photovoltaic devices using a variety of dyes1-…     

Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

New condensed indoline bis-spiropyrans

The synthesis of new condensed indoline bis-spiropyrans from isomeric hexamethyldihydroindolo-[4,5-e]-and -[7,6-g]indoles, and also from hexamethyldihydrobenzo[e]pyrrolo[3,2-g]indole in three stages has been generalized. By condensation of the isomeric bis-analogs of Fischer's bases obtained at the second stage with salicylic aldehydes, the following bis-spiro compounds have been synthesized: 6,6"-dinitro-, 6,6",8,8"-tetranitro-, 6,6",8,8"-tetrabromo-1',3',3',6',8',8'-hexamethyldispiro[chromene-2,2'-indolino[7,6-g]indoline-7',2"-chromenes], 6,6"-dinitro-, 6,6",8,8"-tetranitro-, 6,6",8,8"-tetrabromo-1',1',3',8',10',10'-hexamethyldispiro[chromene-2,2'-indolino[4,5-e]indoline-9',2"-chromenes], 6,6"-di-nitro-, 6,6"-dibromo-, and 6,6",8,8"-tetrabromo-1',1',8,8'-tetramethyl-1',4',5',8'-tetrahydrodispiro-[chromene-2,2'-dipyrrolo[1,2,3-d,e:3,2,1-i,j]benzo[g]quinoxaline-7',2"-chromenes].     

The Crystal Structure of Biphenyltetracarboxylic Dianhydride Isomers

１　ＩＮＴＲＯＤＵＣＴＩＯＮＡｒｏｍａｔｉｃｐｏｌｙｉｍｉｄｅｓａｒｅａｃｌａｓｓｏｆｐｏｌｙｍｅｒｓｋｎｏｗｎｆｏｒｔｈｅｉｒｈｉｇｈｔｅｍｐｅｒａｔｕｒｅｓｔａｂｉｌｉｔｙ,ｅｘｃｅｌｌｅｎｔｅｌｅｃｔｒｉｃａｌａｎｄｍｅｃｈａｎｉｃａｌｐｒｏｐｅｒｔｉｅｓ．Ｔｈｅｓｅｐｒｏｐｅｒｔｉｅｓｍａｋｅｔｈｅｍｈｉｇｈｌｙｄｅｓｉｒａｂｌｅｆｏｒｈｉｇｈｐｅｒｆｏｒｍａｎｃｅａｐｐｌｉｃａｔｉｏｎｓ〔１〕．Ｈｏｗｅｖｅｒ,ｔｒａｄｉｔｉｏｎａｌｐｏｌｙｉｍｉｄｅｓｓｕｃｈａｓＵＰＩＬＥＸＲａｎｄ…     

Easily processable phenylene-thiophene-based organic field-effect transistors and solution-fabricated nonvolatile transistor memory elements

The synthesis of a new series of mixed phenylene-thiophene oligomers is reported; 2,5-bis(4-n-hexylphenyl)thiophene (dH-PTP, 1), 5,5'-bis(4-n-hexylphenyl)-2,2'-bithiophene (dH-PTTP, 2), 5,5' '-bis(4-n-hexylphenyl)-2,2':5',2' '-terthiophene (dH-PT(3)P, 3), 5,5' "-bis(4-n-hexylphenyl)-2,2':5',2' ':5' ',2' "-quaterthiophene (dH-PT(4)P, 4), 1,4-bis[5-(4-n-hexylphenyl)-2-thienyl]benzene (dH-PTPTP, 5), and 2,5-bis[4(4'-n-hexylphenyl)phenyl]thiophene (dH-PPTPP, 6) were characterized by (1)H NMR, elemental analysis, UV-visible spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Vacuum-evaporated and solution-cast films were characterized by X-ray diffraction and scanning electron microscopy. All compounds display high p-type carrier mobilities as evaporated (up to 0.09 cm(2)/Vs) and as solution-cast (up to 0.03 cm(2)/Vs) films on both Si/SiO(2) and ITO/GR (glass resin) substrates. The straightforwardly synthesized dH-PTTP (2) displays an unprecedented combination of mobility, on/off ratio, stability, and processability. Both dH-PTTP (2) and dH-PPTPP (6) display a reversible, tunable, and stable memory effect even as solution-cast devices, with turn-on characteristics shifting from accumulation mode to zero or depletion mode after a writing voltage V(w) is applied. The charge storage is distributed over the gate dielectric structure and is concentrated near the dielectric-semiconductor interface, as evidenced by the response of "floating gate" configuration devices. Simple nonvolatile elements have been fabricated by solution-only techniques on ITO substrates using spin-coated glass resin, solution-cast oligomeric semiconductors, and painted graphite paste electrodes.     

以三聚茚为核的星型电子受体材料的合成、 表征与光伏性能

以高度平面共轭的烷基取代三聚茚为中心核, 以噻吩基团桥联, 在末端连接氰基茚酮作为拉电子基团, 设计合成了一类星型受体分子2,2',2″-{[(5,5,10,10,15,15-己基-10,15-二氢-5H-二茚[1,2-a：1',2'-c]芴-2,7,12-三基)三(噻吩-5,2-二基)]三(亚甲基)}三(3-氧杂-2,3-二氢-1H-茚-2,1-二叉)三丙二腈(NFT-C6)和2,2',2″-{[(5,5,10,10,15,15-癸基-10,15-二氢-5H-二茚[1,2-a：1',2'-c]芴-2,7,12-三基)三(噻吩-5,2-二基)]三(亚甲基)}三(3-氧杂-2,3-二氢-1H-茚-2,1-二叉)三丙二腈(NFT-C10). NFT-C6和NFT-C10的最高占据轨道(HOMO)和最低未占轨道(LUMO)分别位于-5.66和-3.75 eV. 其薄膜在400~700 nm范围内具有较大的吸收强度, 最大吸收峰分别位于606和586 nm. 以聚[(2,6-{4,8-二[5-(2-乙基己基)噻吩-2-基]-苯并[1,2-b：4,5-b']二噻吩})-{5,5-(1',3'-二-2-噻吩基-5',7'-二(2-乙基己基)苯并[1',2'-c：4',5'-c']二噻吩-4,8-二酮)}](PBDB-T)为给体材料, 以NFT-C6或NFT-C10为受体材料制备了太阳能电池器件, 器件在300~700 nm之间具有较宽的响应光谱, 其光电转换效率(PCE)分别达到1.09%和5.23%. 原子力显微镜(AFM)结果表明, PBDB-T和NFT-C10共混制备的光伏器件活性层具有合适的相分离尺寸, 有利于激子的有效解离, 而PBDB-T: NFT-C6器件的活性层相分离尺寸过大, 增加了激子复合的几率, 使器件的短路电流、 填充因子和PCE降低. 研究结果表明, 基于三聚茚的星型光伏材料具有一定的应用前景.     

Synthesis and Some Chemical Conversions of 2-([2,2]-5-Paracyclophanyl)pyrrole

2-([2,2]-5-Paracyclophanyl)pyrrole has been synthesized and nitration and formylation of it have been effected. The 1--cyanoethyl derivative and 2-formyl-5-paracyclophanyl-3H-pyrrolizine have been obtained from 5-formyl-2-([2,2]-5-paracyclophanyl)pyrrole by the action of acrylonitrile and acrolein respectively under Michael reaction conditions.     

2,6-Diarylnaphtho[1,8-bc:5,4-b'c']dithiophenes as new high-performance semiconductors for organic field-effect transistors

A series of 2,6-diaryl-substituted naphtho[1,8-bc:5,4-b'c']dithiophene derivatives 2-6, whose aryl groups include 5-hexyl-2-thienyl, 2,2'-bithiophen-5-yl, phenyl, 2-naphthyl, and 4-biphenylyl, was synthesized by the palladium-catalyzed Suzuki-Miyaura coupling and utilized as active layers of organic field-effect transistors (OFETs). All devices fabricated using vapor-deposited thin films of these compounds showed typical p-type FET characteristics. The mobilities are relatively good and widely range from 10(-4) to 10(-1) cm2 V(-1) s(-1), depending on the substituent groups. Among them, the mobilities of the devices using films of 3-5 tend to increase with the increasing temperature of the Si/SiO2 substrate during film deposition. In particular, the device based on the naphthyl derivative 5, when fabricated at 140 degrees C, marked a high mobility of 0.11 cm2 V(-1) s(-1) with an on/off ratio of 10(5), which is a top class of performance among organic thin-film transistors. Studies of X-ray diffractograms (XRDs) have revealed that the film of 4 and 5 is composed of two kinds of crystal grains with different phases, so-called "single-crystal phase" and "thin film phase", and that the proportion of the thin film phase increases with an increase of the substrate temperature. In the thin film phase the assembled molecules stand nearly upright on the substrate in such a way as to be favorable to carrier migration.     

One dense and two open chiral metal-organic frameworks: crystal structures and physical properties

Three 3D robust homochiral helical coordination polymers, [Cu(2,2',3,3'-H2odpa)(bpy)] (1), {[Ni4(2,2',3,3'-odpa)2(bpy)4(H2O)4].(H2O)16} (2), and {[Co4(2,2',3,3'-odpa)2(bpy)4(H2O)4].(H2O)14} (3), have been hydrothermally synthesized from a flexible ligand of 2,2',3,3'-odpda (2,2',3,3'-oxydiphthalic dianhydride). Compound 1 crystallized in space group P3(1)21 and has a rare chiral dense qzd 7.(5)9 topology that incorporates single helical substructures with the same accessibility, whereas compounds 2 and 3 crystallized in the space group C2 and possessed isostructural 3D chiral open frameworks based on the homochiral 2D sheets and 4,4'-bpy pillars. TGA and PXRD analyses show that the porous framework of 2 is stable after the removal of solvent water molecules. In contrast, 3 changed its structure to an amorphous one because of the simultaneous loss of solvent and coordination water molecules. 1 is nearly paramagnetic, whereas weak ferromagnetic interactions between M(II) (M = Ni, Co) ions have been found in 2 and 3.     

Ultra-thin PTCDA layers studied by optical spectroscopies

3,4,9,10-Perylenetetracarboxylic dianhydride (PTCDA) was deposited using organic molecular beam deposition (OMBD) onto various substrates, i.e. mica(0001), Au(111) layers on mica, and Se-passivated GaAs(100). Layer thicknesses were from 2 to 30 nm. Reflectance and transmittance measurements were performed in order to identify PTCDA absorption features and find suitable laser wavelengths for subsequent Raman investigations. Despite the low thicknesses the Raman spectra reveal strong scattering by the molecular vibrational modes, in particular above 1200 cm^–1. Frequency shifts of various modes in the layers from their values in PTCDA source material may indicate the influence of the substrates. Similar shifts were also observed in infrared spectra of the same materials. Received: 5 August 1998 / Received: 25 October 1998 / Accepted: 26 October 1998     

Ultra-thin PTCDA layers studied by optical spectroscopies

3,4,9,10-Perylenetetracarboxylic dianhydride (PTCDA) was deposited using organic molecular beam deposition (OMBD) onto various substrates, i.e. mica(0001), Au(111) layers on mica, and Se-passivated GaAs(100). Layer thicknesses were from 2 to 30 nm. Reflectance and transmittance measurements were performed in order to identify PTCDA absorption features and find suitable laser wavelengths for subsequent Raman investigations. Despite the low thicknesses the Raman spectra reveal strong scattering by the molecular vibrational modes, in particular above 1200 cm^–1. Frequency shifts of various modes in the layers from their values in PTCDA source material may indicate the influence of the substrates. Similar shifts were also observed in infrared spectra of the same materials. Received: 5 August 1998 / Received: 25 October 1998 / Accepted: 26 October 1998     

Efficient yellow electroluminescence from a single layer of a cyclometalated iridium complex

We report on the spectroscopic, electrochemical, and electroluminescent properties of [Ir(ppy)(2)(dtb-bpy)](+)(PF(6))(-) (ppy: 2-phenylpyridine, dtb-bpy: 4,4'-di-tert-butyl-2,2'-dipyridyl). Single-layer devices were fabricated and found to emit yellow light with a brightness that exceeds 300 cd/m(2) and a luminous power efficiency that exceeds 10 Lm/W at just 3 V. The PF(6)(-) space charge was found to dominate the device characteristics.     

EFFICIENT POLYMER PHOTOVOLTAIC DEVICES BASED ON POLYMER D-A BLENDS*

Recent work demonstrated that efficient solar-energy conversion could be achieved in polymer photovoltaic cells(PVCs) based on interpenetrating bi-continuous networks. In this paper we present a comprehensive study on improvingenergy conversion efficiencies of PVCs based on composite films of MEHPPV and fullerene derivatives. Carrier collectionefficiency of ca. 30% el/ph and energy conversion efficiency of 3.9% were achieved at 500 nm. At reverse bias of 15 V, thephotosensitivity reached 0.8 A/W, corresponding to a quantum efficiency over 100% el/ph. These results suggest that highefficiency photoelectric conversion can be achieved in polymer devices with M-P-M structure. These devices are promisingfor practical applications such as plastic solar cells and plastic photodetectors.     

Synthesis of nitrogen-bridged terthiophenes by tandem Buchwald-Hartwig coupling and their properties

The first synthesis of nitrogen-bridged terthiophenes (NBTTs) has been achieved by a tandem Buchwald-Hartwig coupling of 3,3',3",4'-tetrabromo-2,2':5',2"-terthiophene. Several NBTT derivatives bearing aryl or alkyl moieties on the N-atoms could be synthesized. Their fundamental electrochemical characteristics and HOMO-LUMO levels were found to be influenced by the substituents on the N-atoms.     

Synthesis and redox behavior of biferrocenyl-functionalized ruthenium(II) terpyridine gold clusters

Spectroscopic and electrochemical characterizations of ferrocene- and biferrocene-functionalized terpyridine octanethiolate monolayer-protected clusters were investigated and reported. The electrochemical measurements of Ru2+ coordinated with 4'-ferrocenyl-2,2':6',2' '-terpyridine and 4'-biferrocenyl-2,2':6',2' '-terpyridine complexes were dominated by the Ru2+/Ru3+ redox couple (E(1/2) at approximately 1.3 V), Fe(2+)/Fe(3+) redox couples (E(1/2) from approximately 0.6 to approximately 0.9 V), and terpy/terpy-/terpy2- redox couples (E(1/)(2) at ca. -1.2 and ca. -1.4 V). The substantial appreciable variations detected in the Ru2+/Ru3+ and Fe2+/Fe3+ oxidation potentials indicate that there is an interaction between the Ru2+ and Fe2+ metal centers. The coordination of the Ru2+ metal center with 4'-ferrocenyl-2,2':6',2' '-terpyridine and 4'-biferrocenyl-2,2':6',2' '-terpyridine leads to an intense 1[(d(pi)Fe)6] --> 1[d(pi)Fe)5(pi*terpyRu)1] transition in the visible region. The 1[(d(pi)Fe)6] -->1[d(pi)Fe)5(pi*terpyRu)1] transition observed at approximately 510 nm revealed that there was a qualitative electronic coupling between metal centers. The coordination of the Ru2+ transition metal center lowers the energy of the pi*terpy orbitals, causing this transition.