一种用于多巴胺实时检测的集成微电极的微流控芯片

设计并制作了一种用于多巴胺实时检测的集成微电极的微流控芯片。芯片由一片聚二甲基硅氧烷( PDMS)沟道片和一片玻璃电极片组成,在PDMS沟道片上集成了用作细胞培养室的主通道和用于培养基输送的两条侧通道,在玻璃电极片上集成了用于多巴胺实时检测的微电极。为了解决PDMS沟道片与硅模具之间的脱模困难问题,研究了一种新的脱模方法。建立了一种Au-Au-Au三电极体系,表现出了良好的电化学检测性能。以溶解在神经干细胞培养基中的多巴胺为测试样品,对芯片的性能进行了初步研究。多巴胺的检出限为3.92μmol/L,线性检测范围为10~500μmol/L,片间的检测重复精度小于4%。     

新型芯片电泳柱端安培检测系统的构建与评价

自行设计开发了一套便于与电泳芯片集成的一体式柱端安培检测池系统．该系统由整块透明有机玻璃精密加工而成,包括电泳芯片支架和安培检测池两部分,芯片可通过芯片插槽和不锈钢夹具固定在芯片支架上,各种检测用电极可直接通过螺母固定在安培检测池中．以100μmol／L的DA为模式分析物,分别采用直径为100、300和500μm的铂金圆盘电极与表观直径为240μm的碳纤维电极作为工作电极均在该装置上实现了良好组装和高灵敏检测．采用碳纤维工作电极对该系统的检测参数进行了优化．测试结果表明该系统在电化学清洗程序下连续六次测定100μmol／L多巴胺的峰电流相对标准偏差为3．2％,保留时间相对标准偏差为0．5％,DA的检测限为0．4μmol／L（按照S／N=3计）．该系统体积小巧,测试稳定,检测灵敏度较高,工作电极更换方便,适合作为芯片电泳柱端安培检测通用平台．     

集成铜电极的聚甲基丙烯酸甲脂电泳芯片的制作

在聚甲基丙烯酸甲脂(PMMA)上溅射金属Cu，然后利用光刻、湿法腐蚀的办法制出铜电极。与另一片含有微沟道的PMMA基片热键合，制成集成铜电极的电泳芯片。在电极制作过程中，对Cu表面上覆盖的正性光刻胶的前、后烘烤温度及时间进行了研究。对Cu腐蚀液的选择及其浓度的确定进行了分析。首次提出采用二次曝光的办法去除铜电极表面的光刻胶。为了证明该种方法的可行性，在制作的一种集成铜电极的PMMA芯片上，进行了循环伏安及动态伏安实验，采用安培法对葡萄糖溶液的电泳分析进行检测。     

微流控芯片电解质介导连接在柱式电导检测

研制了一种新型在柱式微流控芯片电导检测装置,利用电解质介导连接分离样品和检测电极,避免了电极的污染和中毒.在芯片的分离通道上设有双T型通道和十字型通道,分别用于进样和检测.检测电极分别置于十字通道口两端的储液池中,电极与芯片相互独立,简化了实验装置,便于电极的更换和清洗.采用缓冲溶液作介导电解质,减小了因两者浓度或种类不同而导致的基线漂移.与非接触电导接触相比,本装置在较低的检测电压(2.5～4.0 V)和频率(700～1700 Hz)范围即可获得相对灵敏的信号.在15 mmol/L MES-His(pH 5.8)的缓冲体系下,K+与Na+的检出限分别为0.5和0.1 μmol/L.     

微流控芯片中超微电极的制作及其在芯片-电化学检测中的应用

设计并制作了集成有超微电极的玻璃微流控芯片.在电化学检测芯片1(EC-1)中,以光刻方法制作13μm宽的Pt超微电极,距分离管道末端30μm,优化电极体系和分离电压,检测了电泳分离的神经递质.在电化学检测芯片2(EC-2)中,制作7μm宽的超微电极,在其上游集成城墙式的膜结构,进一步腐蚀后的膜厚度为10μm,具有良好的导电性和散热性能,成功地将高压电场截至在超微电极之前,具有进一步应用于电化学检测的能力.     

基于智能手机的纸微流控电化学农药检测芯片的研究

纸质微流控装置的出现为低成本化学分析提供了一种简单而实用的平台.本研究开发了一种基于浓差电池原理的新型电化学检测纸质芯片,通过智能手机的辅助实现了农药的检测.检测芯片由色谱纸喷蜡打印制作而成.加入样品与芯片上的预加试剂反应5 min,然后将丝网印刷的电极层置于芯片上,利用模具的重力作用使电极层与纸芯片的两极紧密接触,再通过智能手机的USB读取装置获取芯片的电位,并由电位-农药浓度关系得到检测结果.使用此芯片实现了农药敌百虫(三氯磷酸酯)的快速、简便、可自供电的电化学定量检测,检出限为0.89 μ mol/L.     

带有可更换半自准工作电极的集成化毛细管电泳安培检测芯片

自Woolley等首次报道集成于玻璃芯片上的微型毛细管电泳-安培检测(Chip-based capillary electrophoresis with amperometric detection,CE-AD)系统以来,CE-AD以其高效、高速、高灵敏度以及易微型化集成化等特点引起研究者的关注．在芯片上实现柱端安培检测可用直接制作在芯片上的喷(镀)膜工作电极,或采用外置的壁喷式电极。前者集成化程度高,后者的工作电极可以更换,大大提高了芯片的重复利用率。     

微流控芯片差示式非接触电导检测器的研制

研制了一种适合普通厚度盖片的分析芯片的差示式非接触电导检测器。在芯片上制作分离通道和参比通道,并在独立的电极板上对应于两通道末端位置设置两对电极,分析芯片置于电极板上。信号发生器产生的高频信号分成两路,分别加至分离通道和参比通道对应的激发电极,两通道对应的接收电极的微弱信号经差示放大和整流。当组分经过分离通道电极间区域时,电导率与参比通道出现差异,获得检测信号。实验考察了激发频率、激发电压、电极间距等对检测性能的影响。在优化检测条件下,即检测频率100 kHz、检测电压10 V(Vp-p)、电极间距0.9 mm时,对K+的检出限达12μmol·L-1,相对标准偏差为1.1%,并成功用于Na+、K+离子的分离检测。该检测器适用于容易制作的普通厚度盖片的分析芯片的检测,且芯片与电极板相互独立,使用方便。     

微流控芯片上同工酶的孵育及活性检测

建立了一种在微流控芯片上进行同工酶孵育及活性检测的方法. 该方法在集成温控装置的微流控芯片上实现对同工酶与辅酶反应进程的控制, 完成同工酶的进样、孵育反应、电泳分离和活性检测的实验步骤. 建立了基于微流控芯片的同工酶荧光检测系统, 使用360 nm光源激发辅酶产生荧光, 在460 nm处选择性采集荧光信号. 在微流控芯片上实现了同工酶样品的快速活性检测, 酶活性检测限达到0.5 U/L.     

芯片毛细管电泳中氨基酸的电化学检测

在PDMS微管道集成电化学检测系统中,利用集成的三维调节精确准直定位装置,以直径为150μm的铜圆盘电极,采用柱端检测模式,构建了PDMS微管道-安培检测平台,解决了由于PDMS管道几何位置易变造成的准直问题.应用该系统分离检测了精氨酸和组氨酸,结果令人满意.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.