Multicore Capsules: Thermo‐Stimulable Wax@Water@SiO2 Multicore‐Shell Capsules (Part. Part. Syst. Charact. 2/2013)

Complex wax@water@SiO₂ multicore capsules are synthesized by combining sol‐gel process and formulation of wax‐in‐water‐in‐oil double emulsions. The inner direct wax‐in‐water emulsion is stabilized with modified silica nanoparticles using limited coalescence occurring in Pickering emulsions. In a second step, this obtained liquid dispersion is emulsified in poly‐dimethylsiloxane (PDMS) using a non ionic surfactant to stabilize the second water/oil interface. Finally, a sol‐gel process is employed to mineralize the as‐generated double emulsions giving rise to wax@water@SiO₂ multicore capsules. Due to the wax volume expansion through melting, the as‐synthesized multicore capsules offer thermally stimulated release that is enhanced when surfactant is added in the surrounding continuous oil phase. In addition, the melted wax release can be tuned from a one‐step process to a more sequential dropping mode by varying the mineral precursor tetraethoxy‐orthosilane (TEOS) concentration in the oily phase during mineralization.     

Bactericidal effects of Ag nanoparticles immobilized on surface of SiO2 thin film with high concentration

Bactericidal activity of high concentration Ag nanoparticles immobilized on surface of an aqueous sol–gel silica thin film was investigated against Escherichia coli and Staphylococcus aureus bacteria. Size of the surface nanoparticles was estimated in the range of 35–80 nm by using atomic force microscopy. Due to accumulation of the silver nanoparticles at near the surface (at depth of 6 nm and about 40 times greater than the silver concentration in the sol), the synthesized Ag–SiO₂ thin film (with area of 10 mm²) presented strong antibacterial activities against E. coli and S. aureus bacteria with relative rate of reduction of the viable bacteria of 1.05 and 0.73 h⁻¹ for initial concentration of about 10⁵ cfu/ml, respectively. In addition, the dominant mechanism of silver release in long times was determined based on water diffusion in surface pores of the silica film, unlike the usual diffusion of water on the surface of silver-based bulk materials. Therefore, the Ag nanoparticles embedded near the surface of the SiO₂ thin film can be utilized in various antibacterial applications with a strong and long life activity.     

Selective Antimicrobial and Antibiofilm Disrupting Properties of Functionalized Diamond Nanoparticles Against Escherichia coli and Staphylococcus aureus

Diamond nanoparticles (NDs) have demonstrated great promise as useful materials in a variety of biomedical settings. In this paper, the antimicrobial and antibiofilm activities of variously functionalized NDs against two common bacterial targets Gram‐negative bacterium Escherichia coli and Gram‐positive bacterium Staphylococcus aureus are compared. Hydroxylated (ND‐OH), aminated (ND‐NH₂), carboxylated (ND‐COOH), mannose (ND‐Mannose), tri‐thiomannoside (ND‐Man₃), or tri‐thiolactoside (ND‐Lac₃)‐modified NDs are fabricated and evaluated in the present work. Of these, the mannose‐modified NDs are found to interfere most strongly with the survival of S. aureus, but not to influence the growth of E. coli. In contrast, particles featuring lactosyl units have the opposite effect on S. aureus growth. Sugar‐functionalized NPs reported to display antibacterial effects are rare. Only ND‐COOH particles are seen to have any effect on the growth profile of E. coli, but the effects are moderate. On the other hand, both ND‐NH₂ and ND‐COOH are found to inhibit E. coli‐induced biofilm formation at levels comparable to the known E. coli biofilm disruptor, ampicillin (albeit at concentrations of 100 μg mL^?1). However, none of the modified particles examined here reveal any significant activity as disruptors of S. aureus‐induced biofilm formation even at the highest concentrations studied.     

Micro‐Raman investigation of transition‐metal‐doped ZnO nanoparticles

We measured the Raman spectra of ZnO nanoparticles (ZnO‐NPs), as well as transition‐metal‐doped (5% Mn(II), Fe(II) or Co(II)) ZnO nanoparticles, with an average size of 9 nm. A typical Raman peak at 436 cm⁻¹ is observed in the ZnO‐NPs, whereas Zn_1−xMn_xO, Zn_1−xFe_xO and Zn_1−xCo_xO presented characteristic peaks at 661, 665 and 675 cm⁻¹, respectively. These peaks can be related to the formation of Mn₃O₄, Fe₃O₄ and Co₃O₄ species in the doped ZnO‐NPs. Moreover, these samples were analyzed at various laser powers. Here, we observed new vibrational modes (512, 571 and 528 cm⁻¹), which are specific to Mn, Fe and Co dopants, respectively, and ZnO‐NPs did not reveal any additional modes. The new peaks were interpreted either as disorder activated phonon modes or as local vibrations of Mn‐, Fe‐ and Co‐related complexes in ZnO. Copyright © 2007 John Wiley & Sons, Ltd.     

Docetaxel‐Loaded Nanoparticles of Dendritic Amphiphilic Block Copolymer H40‐PLA‐b‐TPGS for Cancer Treatment

A dendritic amphiphilic block copolymer H40‐poly(d,l ‐lactide)‐block‐d‐α‐tocopheryl polyethylene glycol 1000 succinate (H40‐PLA‐b‐TPGS) is synthesized, which is then employed to develop a system of nanoparticles (NPs) loaded with docetaxel (DTX) as a model drug for cancer treatment due to its higher drug‐loading content and drug encapsulation efficiency, smaller particle size, faster drug release, and higher cellular uptake in comparison to the linear PLA polymer NPs and PLA‐b‐TPGS copolymer NPs. The drug‐loaded NPs are prepared by a modified nanoprecipitation method and characterized in terms of size and size distribution, surface morphology, drug release profile, and physical state of DTX. Cellular uptake of coumarin 6‐loaded NPs by MCF‐7 cancer cells is determined by flow cytometry and confocal laser scanning microscopy. The antitumor efficacy of the drug‐loaded NPs is investigated in vitro by MTT assay and in vivo by xenograft tumor model. The 72 h IC50 of the drug formulated in the PLA, PLA‐b‐TPGS, and H40‐PLA‐b‐TPGS NPs is found to be, 1.5 ± 0.3, 0.9 ± 0.1, and 0.15 ± 0.06 μg mL^?1, which are 7.3, 12.2, and 73.3‐fold effective than 11.0 ± 1.2 μg mL^?1 for Taxotere, respectively. Such advantages are further confirmed by the measurement of the tumor size and weight.     

Engineering the Internal Structure of Magnetic Silica Nanoparticles by Thermal Control

Calcination of hydrated iron salts in the pores of both spherical and rod‐shaped mesoporous silica nanoparticles (NPs) changes the internal structure from an ordered 2D hexagonal structure into a smaller number of large voids in the particles with sizes ranging from large hollow cores down to ten nanometer voids. The voids only form when the heating rate is rapid at a rate of 30 °C min^?1. The sizes of the voids are controlled reproducibly by the final calcination temperature; as the temperature is decreased the number of voids decreases as their size increases. The phase of the iron oxide NPs is α‐Fe₂O₃ when annealed at 500 °C, and Fe₃O₄ when annealed at lower temperatures. The water molecules in the hydrated iron (III) chloride precursor salts appear to play important roles by hydrolyzing Si? O? Si bonding, and the resulting silanol is mobile enough to affect the reconstruction into the framed hollow structures at high temperature. Along with hexahydrates, trivalent Fe³⁺ ions are assumed to contribute to the structure disruption of mesoporous silica by replacing tetrahedral Si⁴⁺ ions and making Fe? O? Si bonding. Volume fraction tomography images generated from transmission electron microscopy (TEM) images enable precise visualization of the structures. These results provide a controllable method of engineering the internal shapes in silica matrices containing superparamagnetic NPs.     

Superhydrophobic conductive textiles with antibacterial property by coating fibers with silver nanoparticles

Silver nanoparticles (Ag NPs) were produced on cotton fibers by reduction of [Ag(NH₃)₂]⁺ complex with glucose. Further modification of the fibers coated by Ag NPs with hexadecyltrimethoxysilane led to superhydrophobic cotton textiles. Scanning electron microscopy images of the textiles showed that the treated fibers were covered with uniform Ag NPs, which generate a dual-size roughness on the textiles favouring the formation of superhydrophobic surfaces, and the Ag NPs formed dense coating around the fibers rendering the intrinsic insulating cotton textiles conductive. Antibacterial test showed that the as-fabricated textiles had high antibacterial activity against the gram-negative bacteria, Escherichia coli. These multifunctional textiles might find applications in biomedical electronic devices.     

Design of Enhanced Catalysts by Coupling of Noble Metals (Au,Ag) with Semiconductor SnO2 for Catalytic Reduction of 4‐Nitrophenol

The reduction of 4‐nitrophenol (Nip) into 4‐aminophenol (Amp) by NaBH₄, which is catalyzed by both binary and ternary yolk–shell noble‐metal/SnO₂ heterostructures, is reported. The binary heterostructures contain individual Au or Ag nanoparticles (NPs) and the ternary heterostructures contain both Au and Ag NPs. The Au@SnO₂ yolk–shell NPs are synthesized via a silica seeds‐mediated hydrothermal method. Subsequently, the Au@SnO₂@Ag and Au@SnO₂@Au yolk–shell–shell (YSS) NPs are synthesized, whereby SnO₂ is located between the Au and Ag NPs. The morphology, composition, and optical properties of the as‐prepared samples are analyzed. For the binary heterostructures, the rate of the reduction reaction increases with decreasing particle size. The catalytic results demonstrate the synergistic effect of Au and Ag in the ternary metal–semiconductor heterostructures, which is beneficial to the catalytic reduction of Nip into Amp. Both the binary and ternary heterostructures exhibit significantly better catalytic performances than the corresponding bare Au and Ag NPs. It is envisaged that the current synthesized strategy will promote further interest in the field of bimetal NP‐based catalysis.     

In Vitro Evaluation of Non‐Protein Adsorbing Breast Cancer Theranostics Based on 19F‐Polymer Containing Nanoparticles

Eight fluorinated nanoparticles (NPs) are synthesized, loaded with doxorubicin (DOX), and evaluated as theranostic delivery platforms to breast cancer cells. The multifunctional NPs are formed by self‐assembly of either linear or star‐shaped amphiphilic block copolymers, with fluorinated segments incorporated in the hydrophilic corona of the carrier. The sizes of the NPs confirm that small circular NPs are formed. The release kinetics data of the particles reveals clear hydrophobic core dependence, with longer sustained release from particles with larger hydrophobic cores, suggesting that the DOX release from these carriers can be tailored. Viability assays and flow cytometry evaluation of the ratios of apoptosis/necrosis indicate that the materials are non‐toxic to breast cancer cells before DOX loading; however, they are very efficient, similar to free DOX, at killing cancer cells after drug encapsulation. Both flow cytometry and confocal microscopy confirm the cellular uptake of NPs and DOX‐NPs into breast cancer cells, and in vitro ¹⁹F‐MRI measurement shows that the fluorinated NPs have strong imaging signals, qualifying them as a potential in vivo contrast agent for ¹⁹F‐MRI.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Core–Shell Bi2Se3@mSiO2‐PEG as a Multifunctional Drug‐Delivery Nanoplatform for Synergistic Thermo‐Chemotherapy with Infrared Thermal Imaging of Cancer Cells

Thermo‐chemotherapy combining photothermal therapy (PTT) with chemotherapy has become a potent approach for antitumor treatment. In this study, a multifunctional drug‐delivery nanoplatform based on polyethylene glycol (PEG)‐modified mesoporous silica‐coated bismuth selenide nanoparticles (referred to as Bi₂Se₃@mSiO₂‐PEG NPs) is developed for synergistic PTT and chemotherapy with infrared thermal (IRT) imaging of cancer cells. The product shows no/low cytotoxicity, strong near‐infrared (NIR) optical absorption, high photothermal conversion capacity, and stability. Utilizing the prominent photothermal effect, high‐contrast IRT imaging and efficient photothermal killing effect on cancer cells are achieved upon NIR laser irradiation. Moreover, the successful mesoporous silica coating of the Bi₂Se₃@mSiO₂‐PEG NPs cannot only largely improve the stability but also endow the NPs high drug loading capacity. As a proof‐of‐concept model, doxorubicin (DOX) is successfully loaded into the NPs with rather high loading capacity (≈50.0%) via the nanoprecipitation method. It is found that the DOX‐loaded NPs exhibit a bimodal on‐demand pH‐ and NIR‐responsive drug release property, and can realize effective intracellular drug delivery for chemotherapy. The synergistic thermo‐chemotherapy results in a significantly higher antitumor efficacy than either PTT or chemotherapy alone. The work reveals the great potential of such core–shell NPs as a multifunctional drug‐delivery nanosystem for thermo‐chemotherapy.     

Single‐Cell Investigations of Silver Nanoparticle–Bacteria Interactions

Interaction of bacteria with citrate‐reduced silver nanoparticles (AgNPs) of size 25 nm ± 8.5 nm is studied using Raman spectroscopy in conjunction with plasmon resonance imaging of single bacterial cells. Distribution of isolated nanoparticles (NPs) inside Escherichia coli (ATCC 25922; E. coli) is observed by hyperspectral imaging (HSI) as a function of incubation time. Time‐dependent degradation of bacterial DNA upon incubation of AgNPs with E. coli is proven by Raman spectroscopic studies. While attachment of NPs is evident in HSI, molecular changes are evident from the surface‐enhanced Raman spectra of adsorbed DNA and its fragments. Distinct enhancement of DNA features is observed upon interaction of AgNPs and the number of such distinct features increases with incubation time, reaches a maximum, and decreases afterwards. This systematic interaction of DNA with the NPs system and its gradual chemical evolution is proven by investigating isolated plasmid DNA. A comparative Raman study with silver ions has shown that DNA features are observable only when bacteria are incubated with AgNPs. Energetics of interaction examined with microcalorimetry suggests the exothermicity of ?1.547 × 10¹⁰ cal mol^?1 for the NP–bacteria system. Specific interaction of AgNPs with exocyclic nitrogen present in the bases, adenine, guanine, and cytosine, leads to the changes in DNA.     

Cyclodextrin metal–organic framework by ultrasound-assisted rapid synthesis for caffeic acid loading and antibacterial application

Cyclodextrin metal–organic framework by ultrasound-assisted rapid synthesis for caffeic acid (CA) loading and antibacterial application (U-CD-MOF) was successfully studied and this method shortened the preparation time to a few minutes. It was found that the ultrasonic power, reaction time and temperature would affect the morphology and size of the obtained crystal. Under the optimal conditions, U-CD-MOF had a cubic structure with uniform size of 8.60 ± 1.95 μm. U-CD-MOF was used to load the antibacterial natural product CA to form the composite (CA@U-CD-MOF) and the loading rate of CA@U-CD-MOF to CA could reach 19.63 ± 2.53%, which was more than twice that of γ-CD. Various techniques were applied to characterize the synthesized crystal, including Powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and N₂ adsorption. In addition, antibacterial tests were performed on the obtained crystal. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of CA@U-CD-MOF for Escherichia coli O157: H7 (E. coli O157: H7) were both 25 mg·mL⁻¹, and the MIC for Staphylococcus aureus (S. aureus). was 25 mg·mL⁻¹. The sustained release behavior of CA@U-CD-MOF to CA in ethanol fitted well to Higuchi model and the loading of CA was supported by molecular docking results. In general, U-CD-MOF was successfully achieved by ultrasound-assisted rapid synthesis and the obtained crystal was further evaluated for potential antibacterial application.     

Raman investigations of Zn1−xCoxO nanocrystals: role of starting precursors on vibrational properties

The Raman spectra of sol–gel derived Co‐doped ZnO nanoparticles (NPs) in the spectral range 100–1500 cm⁻¹ were investigated. In the sol–gel method, three different series of Co‐doped ZnO particles, i.e. Zn_1−xCo_xO (x = 0.05, 0.10, 0.15, and 0.20), were obtained using three different starting precursors, viz. cobalt chloride hexahydrate, cobalt acetate tetrahydrate, and cobalt nitrate hexahydrate, respectively. It has been observed that cobalt acetate is a better precursor in comparison to cobalt chloride and cobalt nitrate to obtain single‐phase Co‐doped ZnO NPs. As for cobalt acetate‐derived NPs, no hidden secondary phase of Co₃O₄ was observed for the lower (x = 0.05) Co concentration. The Fröhlich interaction associated with the longitudinal modes was found to be destroyed with increasing Co concentration due to structural disorder and defects induced by the dopant. In addition to ZnO and Co₃O₄ vibrational modes, a few additional modes near 550 and 715 cm⁻¹ were also observed in all cases, which could be attributed to the modes due to Co doping in ZnO. Copyright © 2011 John Wiley & Sons, Ltd.     

Engineering Multifunctional Gold Decorated Dendritic Mesoporous Silica/Tantalum Oxide Nanoparticles for Intraperitoneal Tumor‐Specific Delivery

Nonspecific high‐energy radiation for treatment of metastatic ovarian cancer is limited by damage to healthy organs, which can be mitigated by the use of radiosensitizers and image‐guided radiotherapy. Gold (Au) and tantalum oxide (TaO_x) nanoparticles (NPs), by virtue of their high atomic numbers, find utility in the design of bimetallic NP systems capable of high‐contrast computed tomography (CT) imaging as well as a potential radiosensitizing effect. These two radio‐dense metals are integrated into dendritic mesoporous silica NPs (dMSNs) with radial porous channels for high surface‐area loading of therapeutic agents. This approach results in stable, monodispersed dMSNs with a uniform distribution of Au on the surface and TaO_x in the core that exhibits CT attenuation up to seven times greater than iodine or monometallic dMSNs without either TaO_x or Au. Tumor targeting is assessed in a metastatic ovarian cancer mouse model. Ex vivo micro‐CT imaging of collected tumors shows that these NPs not only accumulate at tumor sites but also penetrate inside tumor tissues. This study demonstrates that after intraperitoneal administration, rationally designed bimetallic NPs can simultaneously serve as targeted contrast agents for imaging tumors and to enhance radiation therapy in metastatic ovarian cancer.     

Carbon‐Doped Metal Oxide Nanoparticles Prepared from Metal Nitrates in Supercritical CO2‐Enabled Polymer Nanoreactors

Various C‐doped metal oxide nanoparticles (NPs) are prepared from metal nitrates in poly‐(methyl vinyl ether‐co‐maleic anhydride) (PVM/MA) nanoreactors. The loading of metal nitrates in the nanoreactors is realized via a process of solution‐enhanced dispersion by supercritical CO₂. When the temperature exceeds the thermal decomposition temperature of the nitrates, the nitrates‐loaded nanoreactors transform into C‐doped metal oxide NPs. ZnO, NiO, and Co₃O₄ NPs as representative of the doped oxides are successfully fabricated. A precise control over the doping concentration and doping site in the lattice is achieved by changing the mass ratio between PVM/MA and metal nitrate. The controllable carbon doping avoids undesirable aggregation of carbon species and metal oxide NPs, endows the NPs with broad and strong absorption bands in the visible light region, and creates channels for separation of photo‐generated electrons and holes. In this regard, the resultant C‐doped metal oxide NPs exhibit excellent photocatalytic, photo‐induced antibacterial, and photothermal performances.     

Hydrodynamic cavitation: A feasible approach to intensify the emulsion cross-linking process for chitosan nanoparticle synthesis

Chitosan nanoparticles (NPs) exhibit great potential in drug-controlled release systems. A controlled hydrodynamic cavitation (HC) technique was developed to intensify the emulsion crosslinking process for the synthesis of chitosan NPs. Experiments were performed using a circular venturi and under varying operating conditions, i.e., types of oil, addition mode of glutaraldehyde (Glu) solution, inlet pressure (P_in), and rheological properties of chitosan solution. Palm oil was more appropriate for use as the oil phase for the HC-intensified process than the other oil types. The addition mode of water-in-oil (W/O) emulsion containing Glu (with Span 80) was more favorable than the other modes for obtaining a narrow distribution of chitosan NPs. The minimum size of NPs with polydispersity index of 0.342 was 286.5 nm, and the maximum production yield (P_y) could reach 47.26%. A positive correlation was found between the size of NPs and the droplet size of W/O emulsion containing chitosan at increasing P_in. Particle size, size distribution, and the formation of NPs were greatly dependent on the rheological properties of the chitosan solution. Fourier transform infrared spectroscopy (FTIR) analysis indicated that the molecular structure of palm oil was unaffected by HC-induced effects. Compared with ultrasonic horn, stirring-based, and conventional drop-by-drop processes, the application of HC to intensify the emulsion crosslinking process allowed the preparation of a finer and a narrower distribution of chitosan NPs in a more energy-efficient manner. The novel route developed in this work is a viable option for chitosan NP synthesis.     

SHINERS and plasmonic properties of Au Core SiO2 shell nanoparticles with optimal core size and shell thickness

Shell‐isolated nanoparticles (NPs)‐enhanced Raman spectroscopy (SHINERS) can be potentially applied to virtually any substrate type and morphology. How to take a step forward to prepare SHINERS NPs (SHINs) with superior performance is critical for the practical applications of surface‐enhanced Raman scattering (SERS) in the breadth and depth. Here, we present a method to obtain 120 nm diameter gold NPs coated with ultrathin silica shells (1–4 nm). The silica shell can be controlled growth through carefully tuning a series of parameters, such as amount of 3‐aminopropyl triethoxysilane used, pH, reaction time, and reaction temperature. We compare the enhancement factor of the obtained 120 nm Au with a 4 nm silica shell NPs to the 55 nm Au with a 4 nm silica shell NPs, and the activity of a 120 nm SHINs is nearly 24 times that the 55 nm SHIN from a single particle view. We also compare the enhancement factor of 1 nm silica shell Au@SiO₂ NPs with the bare Au NPs. The enhancement factor of 1 nm silica shell Au@SiO₂ NPs was found to be about twice that of the bare particles. For a deeper understanding of the source of the giant enhanced electrical field of the 1 nm silica shell Au@SiO₂ NPs, we study the plasmonic property of single 1 nm silica shell Au@SiO₂ NP on a gold film substrate through correlation of the structure of single NP using SEM with its SPR spectroscopy. We find that the multipolar interaction between the single Au@SiO₂ NP and gold film substrate is important for the SERS. Our studies on the performance of 120 nm SHINs and the plasmonic property of these particles can significantly expand the applications of SHINERS technique and improve the understanding of physical nature of SHINs. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermomagnetically Responsive γ‐Fe2O3@Wax@SiO2 Sub‐Micrometer Capsules

A three steps synthesis route is proposed to generate thermosensitive and magnetically responsive γ‐Fe₂O₃@Wax@SiO₂ sub‐micrometer capsules with a paraffinic core and a solid and brittle shell. The process integrates Pickering‐based emulsions, inorganic and sol–gel chemistries to promote monodisperse in size wax droplets, γ‐Fe₂O₃ nanoparticles and mineralization of the wax/water interfaces. Hybrid capsules are obtained with an average size around 800 nm, representing the first example of sub‐micrometer capsules generated employing Pickering emulsions as templates. Cetyltrimethylammonium bromide (CTAB) cationic surfactant added during mineralization at concentrations between 0.17 and 1.0 wt% impacts the shell density. The shell density seems to improve its mechanical strength while affording a low wax expansion volume without breaking for CTAB concentrations above 1.0 wt%. At lower CTAB concentration (0.17 wt%), the silica shell becomes less bulky and cannot resist the wax dilatation induced by the solid‐to‐liquid phase transition imposed by hyperthermia. The magnetically induced heating provided by the internal magnetic moments is sufficient to melt the wax core, expanding its volume, inducing thereby the surrounding silica shell rupture. Such γ‐Fe₂O₃@Stearic Acid@Wax@SiO₂ sub‐micrometer capsules allow a sustained wax release with time, whereby 20% of the wax is released after 50 min of alternating magnetic field treatment.     

An improved understanding of the dispersion of multi-walled carbon nanotubes in non-aqueous solvents

Regenerable antimicrobial N-halamine/silica hybrid nanoparticles (NPs) containing chlorinated 5,5-dimethylhydantoinyl (Cl-DMH) groups, Cl-DMH/SiO₂ hybrid NPs, have been prepared by a co-condensation reaction between N-(3-triethoxysilylpropyl)-5,5-dimethylhydantoin (TS-DMH) and tetraethoxysilane (TEOS) and then a chlorination reaction in NaClO solution. The as-synthesized Cl-DMH/SiO₂ NPs were characterized by transmission electron microscopy, Scanning electron microscopy, X-ray photoelectron spectra, Specific surface area, Differential scanning calorimetry, and Fourier transform infrared. Experimental results showed that the size of the as-synthesized Cl-DMH/SiO₂ NPs could be well adjusted by changing the mass ratio of TS-DMH/TEOS and the volume ratio of 28 % NH₄OH/H₂O. Antimicrobial tests showed that the as-prepared Cl-DMH/SiO₂ hybrid NPs had excellent antimicrobial activities against both Escherichia coli and Staphylococcus aureus. The minimum inhibitory concentration and minimum bactericidal concentration values of the as-prepared Cl-DMH/SiO₂ hybrid NPs are 15 and 20 μg/mL for S. aureus, 25 and 30 μg/mL for E. coli, respectively. Paper disk diffusion assay showed that smaller-sized Cl-DMH/SiO₂ hybrid NPs have bigger inhibition zone diameters, indicating stronger antimicrobial efficacies. Also, the storage stability and regenerability of Cl-DMH/SiO₂ hybrid NPs were investigated.